[ Upstream commit de6f97b2ba ]
compile-testing this driver on other architectures showed
multiple warnings:
drivers/net/ethernet/nxp/lpc_eth.c: In function 'lpc_eth_drv_probe':
drivers/net/ethernet/nxp/lpc_eth.c:1337:19: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
drivers/net/ethernet/nxp/lpc_eth.c:1342:19: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]
Use format strings that work on all architectures.
Link: https://lore.kernel.org/r/20190809144043.476786-10-arnd@arndb.de
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d5078c717 ]
Not all sensors will be able to guarantee a proper initial state.
This may be either because the driver is not properly written,
or (probably unlikely) because the hardware won't support it.
While the right solution in the former case is to fix the sensor
driver, the real world not always allows right solutions, due to lack
of available documentation and support on these sensors.
Let's relax this requirement, and allow the driver to support stream start,
even if the sensor initial sequence wasn't the expected.
Also improve the warning message to better explain the problem and provide
a hint that the sensor driver needs to be fixed.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ef57be07a ]
The streaming state should be set to the first upstream sub-device only,
not everywhere, for a sub-device driver itself knows how to best control
the streaming state of its own upstream sub-devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 092e8eb90a ]
This is mostly a port of Jacopo's fix:
commit aa4bb8b883
Author: Jacopo Mondi <jacopo@jmondi.org>
Date: Fri Jul 6 05:51:52 2018 -0400
media: ov5640: Re-work MIPI startup sequence
In the OV5645 case, the changes are:
- At set_power(1) time power up MIPI Tx/Rx and set data and clock lanes in
LP11 during 'sleep' and 'idle' with MIPI clock in non-continuous mode.
- At set_power(0) time power down MIPI Tx/Rx (in addition to the current
power down of regulators and clock gating).
- At s_stream time enable/disable the MIPI interface output.
With this commit the sensor is able to enter LP-11 mode during power up,
as expected by some CSI-2 controllers.
Many thanks to Fabio Estevam for his help debugging this issue.
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a4d8fb229 ]
Same as in the commit 0176622953 ("perf record: Support s390 random
socket_id assignment"), aarch64 also have this problem.
Without this fix:
[root@localhost perf]# ./perf report --header -I -v
...
socket_id number is too big.You may need to upgrade the perf tool.
# ========
# captured on : Thu Aug 1 22:58:38 2019
# header version : 1
...
# Core ID and Socket ID information is not available
...
With this fix:
[root@localhost perf]# ./perf report --header -I -v
...
cpumask list: 0-31
cpumask list: 32-63
cpumask list: 64-95
cpumask list: 96-127
# ========
# captured on : Thu Aug 1 22:58:38 2019
# header version : 1
...
# CPU 0: Core ID 0, Socket ID 36
# CPU 1: Core ID 1, Socket ID 36
...
# CPU 126: Core ID 126, Socket ID 8442
# CPU 127: Core ID 127, Socket ID 8442
...
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Link: http://lkml.kernel.org/r/1564717737-21602-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00c9755524 ]
When compile-testing on other architectures, we get lots of warnings
about incorrect format strings, like:
drivers/dma/iop-adma.c: In function 'iop_adma_alloc_slots':
drivers/dma/iop-adma.c:307:6: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]
drivers/dma/iop-adma.c: In function 'iop_adma_prep_dma_memcpy':
>> drivers/dma/iop-adma.c:518:40: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=]
Use %zu for printing size_t as required, and cast the dma_addr_t
arguments to 'u64' for printing with %llx. Ideally this should use
the %pad format string, but that requires an lvalue argument that
doesn't work here.
Link: https://lore.kernel.org/r/20190809163334.489360-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b20a6e298b ]
Allow selecting the IR protocol, MCE or iMON, for a device that
identifies as follows (with config id 0x7e):
15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller
As the driver is structured to default to iMON when both RC
protocols are supported, existing users of this device (using MCE
protocol) will need to manually switch to MCE (RC-6) protocol from
userspace (with ir-keytable, sysfs).
Signed-off-by: Darius Rad <alpha@area49.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fd2293856 ]
When support for the IPMMU is not enabled, the FDP driver may be
probe-deferred multiple times, causing several messages to be printed
like:
rcar_fdp1 fe940000.fdp1: FCP not found (-517)
rcar_fdp1 fe944000.fdp1: FCP not found (-517)
Fix this by reducing the message level to debug level, as is done in the
VSP1 driver.
Fixes: 4710b752e0 ("[media] v4l: Add Renesas R-Car FDP1 Driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 864919ea03 ]
of_get_next_child() increments the reference count of the returning
device_node. Decrement it in the check if we are using the old or the
new DTB.
Fixes: ba1f1f70c2 ("[media] media: mtk-mdp: Fix mdp device tree")
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Houlong Wei <houlong.wei@mediatek.com>
[hverkuil-cisco@xs4all.nl: use node instead of parent as temp variable]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fe94ce1c6 ]
To get the expected output we have to ignore whatever changes the user
has in its ~/.perfconfig file, so set PERF_CONFIG to /dev/null to
achieve that.
Before:
# egrep 'trace|show_' ~/.perfconfig
[trace]
show_zeros = yes
show_duration = no
show_timestamp = no
show_arg_names = no
show_prefix = yes
# echo $PERF_CONFIG
# perf test "trace + vfs_getname"
70: Check open filename arg using perf trace + vfs_getname: FAILED!
# export PERF_CONFIG=/dev/null
# perf test "trace + vfs_getname"
70: Check open filename arg using perf trace + vfs_getname: Ok
#
After:
# egrep 'trace|show_' ~/.perfconfig
[trace]
show_zeros = yes
show_duration = no
show_timestamp = no
show_arg_names = no
show_prefix = yes
# echo $PERF_CONFIG
# perf test "trace + vfs_getname"
70: Check open filename arg using perf trace + vfs_getname: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: https://lkml.kernel.org/n/tip-3up27pexg5i3exuzqrvt4m8u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61a461fcbd ]
We had this comment in Documentation/perf_counter/config.c, i.e. since
when we got this from the git sources, but never really did that
getenv("PERF_CONFIG"), do it now as I need to disable whatever
~/.perfconfig root has so that tests parsing tool output are done for
the expected default output or that we specify an alternate config file
that when read will make the tools produce expected output.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 0780060124 ("perf_counter tools: add in basic glue from Git")
Link: https://lkml.kernel.org/n/tip-jo209zac9rut0dz1rqvbdlgm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e78a7614f3 ]
Scheduling-clock interrupts can arrive late in the CPU-offline process,
after idle entry and the subsequent call to cpuhp_report_idle_dead().
Once execution passes the call to rcu_report_dead(), RCU is ignoring
the CPU, which results in lockdep complaints when the interrupt handler
uses RCU:
------------------------------------------------------------------------
=============================
WARNING: suspicious RCU usage
5.2.0-rc1+ #681 Not tainted
-----------------------------
kernel/sched/fair.c:9542 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/5/0.
stack backtrace:
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.2.0-rc1+ #681
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Bochs 01/01/2011
Call Trace:
<IRQ>
dump_stack+0x5e/0x8b
trigger_load_balance+0xa8/0x390
? tick_sched_do_timer+0x60/0x60
update_process_times+0x3b/0x50
tick_sched_handle+0x2f/0x40
tick_sched_timer+0x32/0x70
__hrtimer_run_queues+0xd3/0x3b0
hrtimer_interrupt+0x11d/0x270
? sched_clock_local+0xc/0x74
smp_apic_timer_interrupt+0x79/0x200
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:delay_tsc+0x22/0x50
Code: ff 0f 1f 80 00 00 00 00 65 44 8b 05 18 a7 11 48 0f ae e8 0f 31 48 89 d6 48 c1 e6 20 48 09 c6 eb 0e f3 90 65 8b 05 fe a6 11 48 <41> 39 c0 75 18 0f ae e8 0f 31 48 c1 e2 20 48 09 c2 48 89 d0 48 29
RSP: 0000:ffff8f92c0157ed0 EFLAGS: 00000212 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000005 RBX: ffff8c861f356400 RCX: ffff8f92c0157e64
RDX: 000000321214c8cc RSI: 00000032120daa7f RDI: 0000000000260f15
RBP: 0000000000000005 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: ffff8c861ee18000 R15: ffff8c861ee18000
cpuhp_report_idle_dead+0x31/0x60
do_idle+0x1d5/0x200
? _raw_spin_unlock_irqrestore+0x2d/0x40
cpu_startup_entry+0x14/0x20
start_secondary+0x151/0x170
secondary_startup_64+0xa4/0xb0
------------------------------------------------------------------------
This happens rarely, but can be forced by happen more often by
placing delays in cpuhp_report_idle_dead() following the call to
rcu_report_dead(). With this in place, the following rcutorture
scenario reproduces the problem within a few minutes:
tools/testing/selftests/rcutorture/bin/kvm.sh --cpus 8 --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TREE04"
This commit uses the crude but effective expedient of moving the disabling
of interrupts within the idle loop to precede the cpu_is_offline()
check. It also invokes tick_nohz_idle_stop_tick() instead of
tick_nohz_idle_stop_tick_protected() to shut off the scheduling-clock
interrupt.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
[ paulmck: Revert tick_nohz_idle_stop_tick_protected() removal, new callers. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a46d14eca7 ]
Enabling WARN_DOUBLE_CLOCK in /sys/kernel/debug/sched_features causes
warning to fire in update_rq_clock. This seems to be caused by onlining
a new fair sched group not using the rq lock wrappers.
[] rq->clock_update_flags & RQCF_UPDATED
[] WARNING: CPU: 5 PID: 54385 at kernel/sched/core.c:210 update_rq_clock+0xec/0x150
[] Call Trace:
[] online_fair_sched_group+0x53/0x100
[] cpu_cgroup_css_online+0x16/0x20
[] online_css+0x1c/0x60
[] cgroup_apply_control_enable+0x231/0x3b0
[] cgroup_mkdir+0x41b/0x530
[] kernfs_iop_mkdir+0x61/0xa0
[] vfs_mkdir+0x108/0x1a0
[] do_mkdirat+0x77/0xe0
[] do_syscall_64+0x55/0x1d0
[] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Using the wrappers in online_fair_sched_group instead of the raw locking
removes this warning.
[ tglx: Use rq_*lock_irq() ]
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20190801133749.11033-1-pauld@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dc34d635c ]
Sometimes platfom may take too long to respond to the command and OS
might timeout before platform transfer the ownership of the shared
memory region to the OS with the response.
Since the mailbox channel associated with the channel is freed and new
commands are dispatch on the same channel, OS needs to wait until it
gets back the ownership. If not, either OS may end up overwriting the
platform response for the last command(which is fine as OS timed out
that command) or platform might overwrite the payload for the next
command with the response for the old.
The latter is problematic as platform may end up interpretting the
response as the payload. In order to avoid such race, let's wait until
the OS gets back the ownership before we prepare the shared memory with
the payload for the next command.
Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29a3388bfc ]
Depending on how BIOS has marked the reserved region containing the 32KB
MCHBAR you can get warnings like:
resource sanity check: requesting [mem 0xfed10000-0xfed1ffff], which spans more than reserved [mem 0xfed10000-0xfed17fff]
caller dnv_rd_reg+0xc8/0x240 [pnd2_edac] mapping multiple BARs
Not all of the mmio regions used in dnv_rd_reg() are the same size. The
MCHBAR window is 32KB and the sideband ports are 64KB. Pass the correct
size to ioremap() depending on which resource we're reading from.
Signed-off-by: Stephen Douthit <stephend@silicom-usa.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdbe4eeeb1 ]
Enabling Direct I/O with loop devices helps reducing memory usage by
avoiding double caching. 32 bit applications running on 64 bits systems
are currently not able to request direct I/O because is missing from the
lo_compat_ioctl.
This patch fixes the compatibility issue mentioned above by exporting
LOOP_SET_DIRECT_IO as additional lo_compat_ioctl() entry.
The input argument for this ioctl is a single long converted to a 1-bit
boolean, so compatibility is preserved.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c2b005f54 ]
Some platforms define their processors in this manner:
Device (SCK0)
{
Name (_HID, "ACPI0004" /* Module Device */) // _HID: Hardware ID
Name (_UID, "CPUSCK0") // _UID: Unique ID
Processor (CP00, 0x00, 0x00000410, 0x06){}
Processor (CP01, 0x02, 0x00000410, 0x06){}
Processor (CP02, 0x04, 0x00000410, 0x06){}
Processor (CP03, 0x06, 0x00000410, 0x06){}
Processor (CP04, 0x01, 0x00000410, 0x06){}
Processor (CP05, 0x03, 0x00000410, 0x06){}
Processor (CP06, 0x05, 0x00000410, 0x06){}
Processor (CP07, 0x07, 0x00000410, 0x06){}
Processor (CP08, 0xFF, 0x00000410, 0x06){}
Processor (CP09, 0xFF, 0x00000410, 0x06){}
Processor (CP0A, 0xFF, 0x00000410, 0x06){}
Processor (CP0B, 0xFF, 0x00000410, 0x06){}
...
The processors marked as 0xff are invalid, there are only 8 of them in
this case.
So do not print an error on ids == 0xff, just print an info message.
Actually, we could return ENODEV even on the first CPU with ID 0xff, but
ACPI spec does not forbid the 0xff value to be a processor ID. Given
0xff could be a correct one, we would break working systems if we
returned ENODEV.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6898dd580a ]
arch/microblaze/ defines out_be32() and in_be32(), so don't do that
again in the driver source.
Fixes these build warnings:
../drivers/media/platform/fsl-viu.c:36: warning: "out_be32" redefined
../arch/microblaze/include/asm/io.h:50: note: this is the location of the previous definition
../drivers/media/platform/fsl-viu.c:37: warning: "in_be32" redefined
../arch/microblaze/include/asm/io.h:53: note: this is the location of the previous definition
Fixes: 29d7506863 ("media: fsl-viu: allow building it with COMPILE_TEST")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 062f5b2ae1 ]
When a disk is added to array, the following path is called in mdadm.
Manage_subdevs -> sysfs_freeze_array
-> Manage_add
-> sysfs_set_str(&info, NULL, "sync_action","idle")
Then from kernel side, Manage_add invokes the path (add_new_disk ->
validate_super = super_1_validate) to set In_sync flag.
Since In_sync means "device is in_sync with rest of array", and the new
added disk need to resync thread to help the synchronization of data.
And md_reap_sync_thread would call spare_active to set In_sync for the
new added disk finally. So don't set In_sync if array is in frozen.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d8ed0e9bf ]
When add one disk to array, the md_reap_sync_thread is responsible
to activate the spare and set In_sync flag for the new member in
spare_active().
But if raid1 has one member disk A, and disk B is added to the array.
Then we offline A before all the datas are synchronized from A to B,
obviously B doesn't have the latest data as A, but B is still marked
with In_sync flag.
So let's not call spare_active under the condition, otherwise B is
still showed with 'U' state which is not correct.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeba6809d8 ]
When write bio return error, it would be added to conf->retry_list
and wait for raid1d thread to retry write and acknowledge badblocks.
In narrow_write_error(), the error bio will be split in the unit of
badblock shift (such as one sector) and raid1d thread issues them
one by one. Until all of the splited bio has finished, raid1d thread
can go on processing other things, which is time consuming.
But, there is a scene for error handling that is not necessary.
When the device has been set faulty, flush_bio_list() may end
bios in pending_bio_list with error status. Since these bios
has not been issued to the device actually, error handlding to
retry write and acknowledge badblocks make no sense.
Even without that scene, when the device is faulty, badblocks info
can not be written out to the device. Thus, we also no need to
handle the error IO.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b99286b088 ]
The commit d5370f7548 ("arm64: prefetch: add alternative pattern for
CPUs without a prefetcher") introduced MIDR_IS_CPU_MODEL_RANGE() to be
used in has_no_hw_prefetch() with rv_min=0 which generates a compilation
warning from GCC,
In file included from ./arch/arm64/include/asm/cache.h:8,
from ./include/linux/cache.h:6,
from ./include/linux/printk.h:9,
from ./include/linux/kernel.h:15,
from ./include/linux/cpumask.h:10,
from arch/arm64/kernel/cpufeature.c:11:
arch/arm64/kernel/cpufeature.c: In function 'has_no_hw_prefetch':
./arch/arm64/include/asm/cputype.h:59:26: warning: comparison of
unsigned expression >= 0 is always true [-Wtype-limits]
_model == (model) && rv >= (rv_min) && rv <= (rv_max); \
^~
arch/arm64/kernel/cpufeature.c:889:9: note: in expansion of macro
'MIDR_IS_CPU_MODEL_RANGE'
return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX,
^~~~~~~~~~~~~~~~~~~~~~~
Fix it by converting MIDR_IS_CPU_MODEL_RANGE to a static inline
function.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06e8f5c842 ]
ADG is using clk_get_rate() under atomic context, thus, we might
have scheduling issue.
To avoid this issue, we need to get/keep clk rate under
non atomic context.
We need to handle ADG as special device at Renesas Sound driver.
From SW point of view, we want to impletent it as
rsnd_mod_ops :: prepare, but it makes code just complicate.
To avoid complicated code/patch, this patch adds new clk_rate[] array,
and keep clk IN rate when rsnd_adg_clk_enable() was called.
Reported-by: Leon Kong <Leon.KONG@cn.bosch.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Leon Kong <Leon.KONG@cn.bosch.com>
Link: https://lore.kernel.org/r/87v9vb0xkp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5e5c48c16 ]
The function free_module in file kernel/module.c as follow:
void free_module(struct module *mod) {
......
module_arch_cleanup(mod);
......
module_arch_freeing_init(mod);
......
}
Both module_arch_cleanup and module_arch_freeing_init function
would free the mod->arch.init_unw_table, which cause double free.
Here, set mod->arch.init_unw_table = NULL after remove the unwind
table to avoid double free.
Signed-off-by: chenzefeng <chenzefeng2@huawei.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b34121d9f ]
The Linux kernel assumes that get_endpoint(alts,0) and
get_endpoint(alts,1) are eachothers feedback endpoints.
To reassure that validity it will test bsynchaddress to comply with that
assumption. But if the bsyncaddress is 0 (invalid), it will flag that as
a wrong assumption and return an error.
Fix: Skip the test if bSynchAddress is 0.
Note: those with a valid bSynchAddress should have a code quirck added.
Signed-off-by: Ard van Breemen <ard@kwaak.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3724ace582 ]
The grain in EDAC is defined as "minimum granularity for an error
report, in bytes". The following calculation of the grain_bits in
edac_mc is wrong:
grain_bits = fls_long(e->grain) + 1;
Where grain_bits is defined as:
grain = 1 << grain_bits
Example:
grain = 8 # 64 bit (8 bytes)
grain_bits = fls_long(8) + 1
grain_bits = 4 + 1 = 5
grain = 1 << grain_bits
grain = 1 << 5 = 32
Replace it with the correct calculation:
grain_bits = fls_long(e->grain - 1);
The example gives now:
grain_bits = fls_long(8 - 1)
grain_bits = fls_long(7)
grain_bits = 3
grain = 1 << 3 = 8
Also, check if the hardware reports a reasonable grain != 0 and fallback
with a warning to 1 byte granularity otherwise.
[ bp: massage a bit. ]
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190624150758.6695-2-rrichter@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2127c01b7f ]
In build_adc_controls(), there is an if statement on line 773 to check
whether ak->adc_info is NULL:
if (! ak->adc_info ||
! ak->adc_info[mixer_ch].switch_name)
When ak->adc_info is NULL, it is used on line 792:
knew.name = ak->adc_info[mixer_ch].selector_name;
Thus, a possible null-pointer dereference may occur.
To fix this bug, referring to lines 773 and 774, ak->adc_info
and ak->adc_info[mixer_ch].selector_name are checked before being used.
This bug is found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd65f7e19c ]
The last fallback of CORB/RIRB communication error recovery is to turn
on the single command mode, and this last resort usually means that
something is really screwed up. Instead of a normal dev_err(), show
the error more clearly with dev_WARN() with the caller stack trace.
Also, show the bus-reset fallback also as an error, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2640da4ccc ]
If the APIC was already enabled on entry of setup_local_APIC() then
disabling it soft via the SPIV register makes a lot of sense.
That masks all LVT entries and brings it into a well defined state.
Otherwise previously enabled LVTs which are not touched in the setup
function stay unmasked and might surprise the just booting kernel.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.068290579@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 747d5a1bf2 ]
A reboot request sends an IPI via the reboot vector and waits for all other
CPUs to stop. If one or more CPUs are in critical regions with interrupts
disabled then the IPI is not handled on those CPUs and the shutdown hangs
if native_stop_other_cpus() is called with the wait argument set.
Such a situation can happen when one CPU was stopped within a lock held
section and another CPU is trying to acquire that lock with interrupts
disabled. There are other scenarios which can cause such a lockup as well.
In theory the shutdown should be attempted by an NMI IPI after the timeout
period elapsed. Though the wait loop after sending the reboot vector IPI
prevents this. It checks the wait request argument and the timeout. If wait
is set, which is true for sys_reboot() then it won't fall through to the
NMI shutdown method after the timeout period has finished.
This was an oversight when the NMI shutdown mechanism was added to handle
the 'reboot IPI is not working' situation. The mechanism was added to deal
with stuck panic shutdowns, which do not have the wait request set, so the
'wait request' case was probably not considered.
Remove the wait check from the post reboot vector IPI wait loop and enforce
that the wait loop in the NMI fallback path is invoked even if NMI IPIs are
disabled or the registration of the NMI handler fails. That second wait
loop will then hang if not all CPUs shutdown and the wait argument is set.
[ tglx: Avoid the hard to parse line break in the NMI fallback path,
add comments and massage the changelog ]
Fixes: 7d007d21e5 ("x86/reboot: Use NMI to assist in shutting down if IRQ fails")
Signed-off-by: Grzegorz Halat <ghalat@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Don Zickus <dzickus@redhat.com>
Link: https://lkml.kernel.org/r/20190628122813.15500-1-ghalat@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc8bf19137 ]
In course of developing shorthand based IPI support issues with the
function which tries to clear eventually pending ISR bits in the local APIC
were observed.
1) O-day testing triggered the WARN_ON() in apic_pending_intr_clear().
This warning is emitted when the function fails to clear pending ISR
bits or observes pending IRR bits which are not delivered to the CPU
after the stale ISR bit(s) are ACK'ed.
Unfortunately the function only emits a WARN_ON() and fails to dump
the IRR/ISR content. That's useless for debugging.
Feng added spot on debug printk's which revealed that the stale IRR
bit belonged to the APIC timer interrupt vector, but adding ad hoc
debug code does not help with sporadic failures in the field.
Rework the loop so the full IRR/ISR contents are saved and on failure
dumped.
2) The loop termination logic is interesting at best.
If the machine has no TSC or cpu_khz is not known yet it tries 1
million times to ack stale IRR/ISR bits. What?
With TSC it uses the TSC to calculate the loop termination. It takes a
timestamp at entry and terminates the loop when:
(rdtsc() - start_timestamp) >= (cpu_hkz << 10)
That's roughly one second.
Both methods are problematic. The APIC has 256 vectors, which means
that in theory max. 256 IRR/ISR bits can be set. In practice this is
impossible and the chance that more than a few bits are set is close
to zero.
With the pure loop based approach the 1 million retries are complete
overkill.
With TSC this can terminate too early in a guest which is running on a
heavily loaded host even with only a couple of IRR/ISR bits set. The
reason is that after acknowledging the highest priority ISR bit,
pending IRRs must get serviced first before the next round of
acknowledge can take place as the APIC (real and virtualized) does not
honour EOI without a preceeding interrupt on the CPU. And every APIC
read/write takes a VMEXIT if the APIC is virtualized. While trying to
reproduce the issue 0-day reported it was observed that the guest was
scheduled out long enough under heavy load that it terminated after 8
iterations.
Make the loop terminate after 512 iterations. That's plenty enough
in any case and does not take endless time to complete.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.158847694@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a07db5c086 ]
On !CONFIG_RT_GROUP_SCHED configurations it is currently not possible to
move RT tasks between cgroups to which CPU controller has been attached;
but it is oddly possible to first move tasks around and then make them
RT (setschedule to FIFO/RR).
E.g.:
# mkdir /sys/fs/cgroup/cpu,cpuacct/group1
# chrt -fp 10 $$
# echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
bash: echo: write error: Invalid argument
# chrt -op 0 $$
# echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
# chrt -fp 10 $$
# cat /sys/fs/cgroup/cpu,cpuacct/group1/tasks
2345
2598
# chrt -p 2345
pid 2345's current scheduling policy: SCHED_FIFO
pid 2345's current scheduling priority: 10
Also, as Michal noted, it is currently not possible to enable CPU
controller on unified hierarchy with !CONFIG_RT_GROUP_SCHED (if there
are any kernel RT threads in root cgroup, they can't be migrated to the
newly created CPU controller's root in cgroup_update_dfl_csses()).
Existing code comes with a comment saying the "we don't support RT-tasks
being in separate groups". Such comment is however stale and belongs to
pre-RT_GROUP_SCHED times. Also, it doesn't make much sense for
!RT_GROUP_ SCHED configurations, since checks related to RT bandwidth
are not performed at all in these cases.
Make moving RT tasks between CPU controller groups viable by removing
special case check for RT (and DEADLINE) tasks.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Link: https://lkml.kernel.org/r/20190719063455.27328-1-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6cad8df6b ]
The load_balance() has a dedicated mecanism to detect when an imbalance
is due to CPU affinity and must be handled at parent level. In this case,
the imbalance field of the parent's sched_group is set.
The description of sg_imbalanced() gives a typical example of two groups
of 4 CPUs each and 4 tasks each with a cpumask covering 1 CPU of the first
group and 3 CPUs of the second group. Something like:
{ 0 1 2 3 } { 4 5 6 7 }
* * * *
But the load_balance fails to fix this UC on my octo cores system
made of 2 clusters of quad cores.
Whereas the load_balance is able to detect that the imbalanced is due to
CPU affinity, it fails to fix it because the imbalance field is cleared
before letting parent level a chance to run. In fact, when the imbalance is
detected, the load_balance reruns without the CPU with pinned tasks. But
there is no other running tasks in the situation described above and
everything looks balanced this time so the imbalance field is immediately
cleared.
The imbalance field should not be cleared if there is no other task to move
when the imbalance is detected.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1561996022-28829-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84ec3a0787 ]
time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint
The TASKS03 and TREE04 rcutorture scenarios produce the following
lockdep complaint:
WARNING: inconsistent lock state
5.2.0-rc1+ #513 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
migration/1/14 [HC0[0]:SC0[0]:HE1:SE1] takes:
(____ptrval____) (tick_broadcast_lock){?...}, at: tick_broadcast_offline+0xf/0x70
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0xb0/0x1c0
_raw_spin_lock_irqsave+0x3c/0x50
tick_broadcast_switch_to_oneshot+0xd/0x40
tick_switch_to_oneshot+0x4f/0xd0
hrtimer_run_queues+0xf3/0x130
run_local_timers+0x1c/0x50
update_process_times+0x1c/0x50
tick_periodic+0x26/0xc0
tick_handle_periodic+0x1a/0x60
smp_apic_timer_interrupt+0x80/0x2a0
apic_timer_interrupt+0xf/0x20
_raw_spin_unlock_irqrestore+0x4e/0x60
rcu_nocb_gp_kthread+0x15d/0x590
kthread+0xf3/0x130
ret_from_fork+0x3a/0x50
irq event stamp: 171
hardirqs last enabled at (171): [<ffffffff8a201a37>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (170): [<ffffffff8a201a53>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last enabled at (0): [<ffffffff8a264ee0>] copy_process.part.56+0x650/0x1cb0
softirqs last disabled at (0): [<0000000000000000>] 0x0
[...]
To reproduce, run the following rcutorture test:
$ tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TASKS03 TREE04"
It turns out that tick_broadcast_offline() was an innocent bystander.
After all, interrupts are supposed to be disabled throughout
take_cpu_down(), and therefore should have been disabled upon entry to
tick_offline_cpu() and thus to tick_broadcast_offline(). This suggests
that one of the CPU-hotplug notifiers was incorrectly enabling interrupts,
and leaving them enabled on return.
Some debugging code showed that the culprit was sched_cpu_dying().
It had irqs enabled after return from sched_tick_stop(). Which in turn
had irqs enabled after return from cancel_delayed_work_sync(). Which is a
wrapper around __cancel_work_timer(). Which can sleep in the case where
something else is concurrently trying to cancel the same delayed work,
and as Thomas Gleixner pointed out on IRC, sleeping is a decidedly bad
idea when you are invoked from take_cpu_down(), regardless of the state
you leave interrupts in upon return.
Code inspection located no reason why the delayed work absolutely
needed to be canceled from sched_tick_stop(): The work is not
bound to the outgoing CPU by design, given that the whole point is
to collect statistics without disturbing the outgoing CPU.
This commit therefore simply drops the cancel_delayed_work_sync() from
sched_tick_stop(). Instead, a new ->state field is added to the tick_work
structure so that the delayed-work handler function sched_tick_remote()
can avoid reposting itself. A cpu_is_offline() check is also added to
sched_tick_remote() to avoid mucking with the state of an offlined CPU
(though it does appear safe to do so). The sched_tick_start() and
sched_tick_stop() functions also update ->state, and sched_tick_start()
also schedules the delayed work if ->state indicates that it is not
already in flight.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Apply Peter Zijlstra and Frederic Weisbecker atomics feedback. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190625165238.GJ26519@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8791a102ce ]
The power down and reset GPIO are optional, but the return value
from devm_gpiod_get_optional() needs to be checked and propagated
in the case of error, so that probe deferral can work.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da79bf41a4 ]
The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
drivers/media/platform/exynos4-is/fimc-is.c:813:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/fimc-is.c:870:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/fimc-is.c:885:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 807, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/media-dev.c:545:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 541, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/media-dev.c:528:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function.
drivers/media/platform/exynos4-is/media-dev.c:534:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 499, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dd4b89dc0 ]
The rc-mm protocol can't be decoded by the mtk-cir since the de-glitch
filter removes pulses/spaces shorter than 294 microseconds.
Tested on a BananaPi R2.
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Sean Wang <sean.wang@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 765bb8610d ]
When CONFIG_DVB_DIB9000 is disabled, we can still compile code that
now fails to link against dibx000_i2c_set_speed:
drivers/media/usb/dvb-usb/dib0700_devices.o: In function `dib01x0_pmu_update.constprop.7':
dib0700_devices.c:(.text.unlikely+0x1c9c): undefined reference to `dibx000_i2c_set_speed'
The call sites are both through dib01x0_pmu_update(), which gets passed
an 'i2c' pointer from dib9000_get_i2c_master(), which has returned
NULL. Checking this pointer seems to be a good idea anyway, and it avoids
the link failure in most cases.
Sean Young found another case that is not fixed by that, where certain
gcc versions leave an unused function in place that causes the link error,
but adding an explict IS_ENABLED() check also solves this.
Fixes: b7f54910ce ("V4L/DVB (4647): Added module for DiB0700 based devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed2abfebb0 ]
Firmware files are in ASCII, using 2 hex characters per byte. The
maximum length of a firmware string is therefore
16 (commands) * 2 (bytes per command) * 2 (characters per byte) = 64
Fixes: ff45262a85 ("leds: add new LP5562 LED driver")
Signed-off-by: Nick Stoughton <nstoughton@logitech.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e37ccf78a ]
We need to use the proper types and convert between physical addresses
and dma addresses here to avoid mismatch warnings. This is especially
important on systems with a different size for dma addresses and
physical addresses. Otherwise, we get the following warning:
drivers/firmware/qcom_scm.c: In function "qcom_scm_assign_mem":
drivers/firmware/qcom_scm.c:469:47: error: passing argument 3 of "dma_alloc_coherent" from incompatible pointer type [-Werror=incompatible-pointer-types]
We also fix the size argument to dma_free_coherent() because that size
doesn't need to be aligned after it's already aligned on the allocation
size. In fact, dma debugging expects the same arguments to be passed to
both the allocation and freeing sides of the functions so changing the
size is incorrect regardless.
Reported-by: Ian Jackson <ian.jackson@citrix.com>
Cc: Ian Jackson <ian.jackson@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
