mvebu dt64 for 5.15 (part 1)
- DTS updates for Marvell Armada CN913x platforms
+ Add support for Armada CN913x Development Board topology "B"
+ Add support for Armada CN913x Reference Design boards (CRB)
+ Fixes the NAND partitioning scheme in DTS eliminating gap between
consecutive partitions
+ Fix 10Gb ports PHY mode names
- Extend PCIe MEM space on Armada 37xx: useful for some combination
of PCIe cards where the initial 16MB was not enough
* tag 'mvebu-dt64-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: armada-37xx: Extend PCIe MEM space
arch/arm64: dts: change 10gbase-kr to 10gbase-r in Armada
arm64: dts: add support for Marvell cn9130-crb platform
dts: marvell: Enable 10G interfaces on 9130-DB and 9131-DB boards
arm64: dts: cn913x: add device trees for topology B boards
Link: https://lore.kernel.org/r/878s10ypxe.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM64: DT: HiSilicon ARM64 DT updates for 5.15
- Address a PCI bus range warning of the hi3660 SoC
* tag 'hisi-arm64-dt-for-5.15' of git://github.com/hisilicon/linux-hisi:
arm64: dts: HiSilicon: hi3660: address a PCI warning
Link: https://lore.kernel.org/r/611B9BE9.8050904@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 updates for v5.15
SDM660 and SDM630 was concluded to be similar enough that they should be
merged, and the derivative SDM636 was added to the bunch. The combined
platform gained support for GPU, DMA, I2C, IMEM, display, power-domains,
SDHCI, thermal, USB, interconnects, VADC, WLED and audio remoteproc. The
Sony Xperia "Ganges" platform was similarly merged with "Nile", got
cleaned up and gained touchscreen, USB, volume keys and uSD support.
IPQ6018 gains USB2 and PCIe support and a few minor fixes. IPQ8074
gains SCM, PRNG and Crypto support and a DT style update of the PCIe
nodes.
MSM8916 gains Coresight STM support. The Xiaomi Redmi 2 is introduced,
with touchscreen, notification LED and IMU support. MSM8996 gains
support for GPU cooling and v3.0 of the SoC, which is used to introduce
support for the Sony Xperia X Performance, XZ and XZs phones.
SC7180 finally gains DisplayPort support and LPASS is updated
accordingly. A number of fixes are introduced and with the newly
introduced DRM aux bus in place Trogdor's panel is moved under the eDP
bridge. SC7280 gained USB, eMMC, SD-card, QFPROM and IPA support, the
new IDP2 board was added.
SM6126 (aka Snapdragon 665) was introduced, together with the Sony
Xperia 10II phone with support for framebuffer, USB, eMMC and volume
keys.
SM8150 gained inline crypto support for UFS enabled, CPU opp-tables was
introduced to scale DDR and L3 frequencies and SPI nodes where added, in
addition to a number of smaller fixes.
SM8250 gained a number of minor fixes and had its serial engines wired
up to use the GENI wrappers' DMA engines.
SM8350 had wakeup-parent defined for the TLMM gpio node and I2C13 was
introduced.
SDM845 display clocks was corrected and Lenovo Yoga C630 got IPA enabled
and now has working LTE connectivity.
Additionally a number of minor fixes throughout to correct DT validation
warnings.
Lastly v5.14-rc3 is merge in to resolve the merge conflicts caused by
the USB maintainer deciding to fix a regression in his tree.
* tag 'qcom-arm64-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (114 commits)
arm64: dts: qcom: sm8250: assign DSI clock source parents
arm64: dts: qcom: sdm845-mtp: assign DSI clock source parents
arm64: dts: qcom: sdm845: assign DSI clock source parents
arm64: dts: qcom: sc7180: assign DSI clock source parents
arm64: dts: qcom: sc7280-idp: Add device tree files for IDP2
dt-bindings: arm: qcom: Document qcom,sc7280-idp2 board
arm64: dts: qcom: sm8350: fix IPA interconnects
arm64: dts: qcom: sc7180: define ipa_fw_mem node
arm64: dts: qcom: sc7280: enable IPA for sc7280-idp
arm64: dts: qcom: sc7280: add IPA information
arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip
arm64: dts: qcom: ipq8074: add PRNG node
arm64: dts: qcom: ipq8074: add crypto nodes
arm64: dts: qcom: sm8350: add qupv3_id_1/i2c13 nodes
arm64: dts: qcom: ipq6018: Add pcie support
arm64: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster
arm64: dts: qcom: sm8150: add SPI nodes
arm64: dts: qcom: msm8916: Enable CoreSight STM component
arm64: dts: qcom: sc7280: Add qfprom node
arm64: dts: qcom: sc7280: Fixup the cpufreq node
...
Link: https://lore.kernel.org/r/20210816231223.586597-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Current PCIe MEM space of size 16 MB is not enough for some combination
of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted
Firmware for Armada 3700 platform already assigns 128 MB for PCIe window,
so extend PCIe MEM space to the end of 128 MB PCIe window which allows to
allocate more PCIe BARs for more PCIe cards.
Without this change some combination of PCIe cards cannot be used and
kernel show error messages in dmesg during initialization:
pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000]
pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000]
pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref]
pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000]
pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000]
pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000]
pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000]
pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000]
pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000]
pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit]
pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit]
Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox
kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot
crashes during loading of kernel DTB file. This bug is present only in
U-Boot code for Turris Mox and therefore other Armada 3700 devices are not
affected by this bug. Bug is fixed in U-Boot version 2021.07.
To not break booting new kernels on existing versions of U-Boot on Turris
Mox, use first 16 MB range for IO and second range with rest of PCIe window
for MEM.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 76f6386b25 ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Qualcomm dts updates for v5.15
This introduces the MSM8226 platform and an initial dts for the Samsung
Galaxy S III Neo phone.
MSM8974 gains another UART and this is used to enable Bluetooth on the
Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for
audio and modem remoteprocs, effectively enabling these.
DSI clocks on APQ8064 are updates as the old legacy clock names are no
longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets
wired up.
Lastly APQ8060 is converted to a SPDX header and the ethernet node is
updates in accordance with the binding.
* tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add ahb reset to ipq806x-gmac
ARM: dts: qcom: Fix up APQ8060 DragonBoard license
ARM: dts: qcom: msm8974: castor: Add Bluetooth-related nodes
ARM: dts: qcom: msm8974: Add blsp2_uart7 for bluetooth on sirius
ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone
dt-bindings: arm: qcom: Document MSM8226 SoC binding
ARM: dts: qcom: Add support for MSM8226 SoC
ARM: dts: qcom: apq8060: Correct Ethernet node name and drop bogus irq property
ARM: dts: qcom: apq8064: correct clock names
ARM: dts: qcom: msm8974-klte: Enable remote processors
Link: https://lore.kernel.org/r/20210816211957.579365-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The USB maintainer felt the strong need to push '1f958f3dff42
("Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"")'
through the usb tree, so merge v5.14-rc3 to resolve the resulting merge
conflicts.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
i.MX arm32 device tree changes for 5.15:
- A series from Christoph Niedermaier to clean up i.MX6 DHCOM support.
- New board support: DHCOM based PicoITX, DHSOM based DRC02, SolidRun
SolidSense, SKOV i.MX6 boards.
- Add WiFi support for i.MX7D base reMkarkable2 device.
- Add FTM devices for i.MX7 to have Flex Timers support.
- Configure ENET_REF clock to 125MHz for imx6qp-prtwd3 to support RGMII
PHY mode.
- Drop unneeded #address-cells and #size-cells from vf610-zii SPI EEPROM
device node.
- Add missing USB OTG OC pinmux and Crypto device for i.MX6QDL Gateworks
boards.
* tag 'imx-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (23 commits)
ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz
ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node
ARM: dts: add SKOV imx6q and imx6dl based boards
ARM: dts: imx7: add ftm nodes for Flex Timers
ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 board
ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX board
ARM: dts: imx6qdl-dhcom: Split SoC-independent parts of DHCOM SOM and PDK2
ARM: dts: imx6q-dhcom: Cleanup of the devicetrees
ARM: dts: imx6q-dhcom: Rearrange of iomux
ARM: dts: imx6q-dhcom: Rework of the DHCOM GPIO pinctrls
ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board
ARM: dts: imx6q-dhcom: Set minimum memory size of all DHCOM i.MX6 variants
ARM: dts: imx6q-dhcom: Remove ddc-i2c-bus property
ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 board
ARM: dts: imx6q-dhcom: Align stdout-path with other DHCOM SoMs
ARM: dts: imx6q-dhcom: Adding Wake pin to the PCIe pinctrl
ARM: dts: imx6q-dhcom: Fill GPIO line names on DHCOM SoM
ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHY
ARM: dts: imx6q-dhcom: Add the parallel system bus
ARM: dts: imx7d-remarkable2: Add WiFi support
...
Link: https://lore.kernel.org/r/20210814133853.9981-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Device tree changes for v5.15-rc1
Contains a couple of fixes across the board and adds support for the
recently released NVIDIA Jetson TX2 NX Developer Kit.
* tag 'tegra-for-5.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix compatible string for Tegra132 CPUs
arm64: tegra: Add missing interconnects property for USB on Tegra186
arm64: tegra: Add NVIDIA Jetson TX2 NX Developer Kit support
arm64: tegra: Add PWM nodes on Tegra186
arm64: tegra194: p2888: Correct interrupt trigger type of temperature sensor
arm64: tegra: Fix Tegra194 PCIe EP compatible string
Link: https://lore.kernel.org/r/20210813162157.2820913-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Device tree changes for v5.15-rc1
The majority of this is temperature sensor additions for various devices
and fixes to the trigger type of the thermal interrupts.
Other than that there are various minor fixes across the board.
* tag 'tegra-for-5.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tamonten: Fix UART pad setting
ARM: tegra: nexus7: Improve thermal zones
ARM: tegra: acer-a500: Improve thermal zones
ARM: tegra: acer-a500: Use verbose variant of atmel,wakeup-method value
ARM: tegra: acer-a500: Add power supplies to accelerometer
ARM: tegra: acer-a500: Remove bogus USB VBUS regulators
ARM: tegra: jetson-tk1: Correct interrupt trigger type of temperature sensor
ARM: tegra: dalmore: Correct interrupt trigger type of temperature sensor
ARM: tegra: cardhu: Correct interrupt trigger type of temperature sensor
ARM: tegra: apalis: Correct interrupt trigger type of temperature sensor
ARM: tegra: nyan: Correct interrupt trigger type of temperature sensor
ARM: tegra: acer-a500: Add interrupt to temperature sensor node
ARM: tegra: nexus7: Add interrupt to temperature sensor node
ARM: tegra: paz00: Add interrupt to temperature sensor node
ARM: tegra: ouya: Add interrupt to temperature sensor node
ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees
Link: https://lore.kernel.org/r/20210813162157.2820913-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: Changes for v5.15-rc1
This contains a single patch that adds the compatible string for the
NVIDIA Jetson TX2 NX developer kit.
* tag 'tegra-for-5.15-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra: Document NVIDIA Jetson TX2 NX developer kit
Link: https://lore.kernel.org/r/20210813162157.2820913-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document the compatible for the Ten64 board which will
be included as freescale/fsl-ls1088a-ten64.dtb in arm64.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Traverse Technologies is a designer and manufacturer
of networking appliances.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Traverse Technologies Ten64 is a Mini-ITX form factor
networking board using the NXP LS1088A SoC.
This device tree only describes features which the mainline
kernel currently has support for, such as some I2C-connected
devices that are not described at present.
System documentation may be found at ten64doc.traverse.com.au
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> # for the MAC/PHY
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Performance Manager Unit was not described in the DTS
which meant performance event monitoring was not possible.
This was exposed by a change to the PMU handling in KVM
in 5.11-rc3 which now prevents a PMU being exposed to a
guest when the host does not provide one:
"KVM: arm64: Don't access PMCR_EL0 when no PMU is available"
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A previous patch added the PCS for DPMAC2 only, as
used for the AQR PHY on the LS1088ARDB.
DPMAC1 PCS access is required for PHYLINK SFP support
on the Traverse Ten64 board.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
By default ENET_REF is configured to 50MHz, which is usable for the RMII
link. In case RGMII is used, we need 125MHz clock.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove #address-cells and #size-cells property from at93c46d device tree
node as it does not have child nodes.
Fixes: 1556063fde ("ARM: dts: vf610-zii-dev: Add ZII development board.")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds sound support to the Reform2.
It differs from the downstream implementation in that the codec
is used as the BCLK and FSYNC master and the i.MX8MQ only supplies
a fixed 25MHz MCLK from the oscillator. This allows to support
a wider range of audio rates by using the codec PLL and to shut
down the audio PLLs on the i.MX8MQ SoC side.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8QXP features four Cortex-A35 cores, use more accurate
compatible.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8MM features four Cortex-A53 cores, update the compatible
to use more accurate "arm,cortex-a53-pmu"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The USB hub has it's reset as GPIO4_IO17 but can be sub-loaded and
VBUS provided by a VBUS regulator with GPIO4_IO2 as the enable and
GPIO1_IO15 as the active-low over-current.
Enable pull-up for GPIO4_IO17 to keep hub out of reset and move VBUS
enable to GPIO4_IO2. Additionally enable pull-up on GPIO1_IO15 so that
if the hub is loaded it never over-currents.
This allows USB to work in both configurations without a device-tree
change.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW71xx has a USB Type-C connector with USB 2.0 signaling. GPIO1_12
is the power-enable to the TPS25821 Source controller and power switch
responsible for monitoring the CC pins and enabling VBUS. Therefore
GPIO1_12 must always be enabled and the vbus output enable from the
IMX8MM can be ignored.
To fix USB OTG VBUS enable a pull-up on GPIO1_12 to always power the
TPS25821 and change the regulator output to GPIO1_10 which is
unconnected.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW700x PMIC does not have an interrupt. Remove the invalid pin
config.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Describe the 2 available CSI interfaces on the i.MX8MQ with the MIPI-CSI2
receiver (new driver) and the CSI Bridge that provides the user buffers
(existing driver).
An image sensor is to be connected to the MIPIs' second port, to be described
in board files.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller
- LTE CAT M1 modem
- USB 2.0 HUB
- M.2 Socket with USB2.0, PCIe, and dual-SIM
- IMX8M FEC
- PCIe based GbE
- RS232/RS485/RS422 serial transceiver
- GPS
- CAN bus
- WiFi / Bluetooth
- MIPI header (DSI/CSI/GPIO/PWM/I2S)
- PMIC
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8 MPlus SoC integrates Cadence HIFI4 DSP. This core runs either a
custom firmware or the open source SOF firmware [1]
DSP device is handled by SOF OF driver found in
sound/soc/sof/sof-of-dev.c
Notice that the DSP node makes use of:
- dsp_reserved, a reserved memory region for various Audio
resources (e.g firmware loading, audio buffers, etc).
- Messaging Unit (mu2) for passing notifications betweem ARM
core and DSP.
[1] https://thesofproject.github.io/latest/platforms/index.html
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Unnecessary blank lines do NOT help readability, so remove them.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The following dtc build warning is seen with W=1:
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts:291.14-397.4: Warning (avoid_unnecessary_addr_size): /soc@0/bus@30800000/i2c@30a20000/gsc@20: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Remove the unnecessary #address-cells/#size-cells to fix it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix the following warnings reported by checkpatch:
arch/..../imx8qxp-ai_ml.dts:198: WARNING: please, no space before tabs
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
