[ Upstream commit e01780ea4661172734118d2a5f41bc9720765668 ]
A bug was found when run ltp test:
BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0
Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206
CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+
Workqueue: pdecrypt_parallel padata_parallel_worker
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
print_address_description.constprop.0+0x6b/0x3d0
print_report+0xdd/0x2c0
kasan_report+0xa5/0xd0
padata_find_next+0x29/0x1a0
padata_reorder+0x131/0x220
padata_parallel_worker+0x3d/0xc0
process_one_work+0x2ec/0x5a0
If 'mdelay(10)' is added before calling 'padata_find_next' in the
'padata_reorder' function, this issue could be reproduced easily with
ltp test (pcrypt_aead01).
This can be explained as bellow:
pcrypt_aead_encrypt
...
padata_do_parallel
refcount_inc(&pd->refcnt); // add refcnt
...
padata_do_serial
padata_reorder // pd
while (1) {
padata_find_next(pd, true); // using pd
queue_work_on
...
padata_serial_worker crypto_del_alg
padata_put_pd_cnt // sub refcnt
padata_free_shell
padata_put_pd(ps->pd);
// pd is freed
// loop again, but pd is freed
// call padata_find_next, UAF
}
In the padata_reorder function, when it loops in 'while', if the alg is
deleted, the refcnt may be decreased to 0 before entering
'padata_find_next', which leads to UAF.
As mentioned in [1], do_serial is supposed to be called with BHs disabled
and always happen under RCU protection, to address this issue, add
synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls
to finish.
[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/
[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/
Fixes: b128a30409 ("padata: allocate workqueue internally")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Qu Zicheng <quzicheng@huawei.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1be9264158ef4818393e5d8144887a1a5d3cc480 ]
`parse_lock_type` can only add the first lock flag in `lock_type_table`
given input `str`. For example, for `Y rwlock`, it only adds `rwlock:R`
into this perf session. Another example is for `-Y mutex`, it only adds
the mutex without `LCB_F_SPIN` flag. The patch fixes this issue, makes
sure both `rwlock:R` and `rwlock:W` will be added with `-Y rwlock`, and
so on.
Testing:
$ ./perf lock con -ab -Y mutex,rwlock -- perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 9.313 [sec]
9.313976 usecs/op
107365 ops/sec
contended total wait max wait avg wait type caller
176 1.65 ms 19.43 us 9.38 us mutex pipe_read+0x57
34 180.14 us 10.93 us 5.30 us mutex pipe_write+0x50
7 77.48 us 16.09 us 11.07 us mutex do_epoll_wait+0x24d
7 74.70 us 13.50 us 10.67 us mutex do_epoll_wait+0x24d
3 35.97 us 14.44 us 11.99 us rwlock:W ep_done_scan+0x2d
3 35.00 us 12.23 us 11.66 us rwlock:W do_epoll_wait+0x255
2 15.88 us 11.96 us 7.94 us rwlock:W do_epoll_wait+0x47c
1 15.23 us 15.23 us 15.23 us rwlock:W do_epoll_wait+0x4d0
1 14.26 us 14.26 us 14.26 us rwlock:W ep_done_scan+0x2d
2 14.00 us 7.99 us 7.00 us mutex pipe_read+0x282
1 12.29 us 12.29 us 12.29 us rwlock:R ep_poll_callback+0x35
1 12.02 us 12.02 us 12.02 us rwlock:W do_epoll_ctl+0xb65
1 10.25 us 10.25 us 10.25 us rwlock:R ep_poll_callback+0x35
1 7.86 us 7.86 us 7.86 us mutex do_epoll_ctl+0x6c1
1 5.04 us 5.04 us 5.04 us mutex do_epoll_ctl+0x3d4
[namhyung: Add a comment and rename to 'mutex:spin' for consistency
Fixes: d783ea8f62 ("perf lock contention: Simplify parse_lock_type()")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Cc: nick.forrington@arm.com
Link: https://lore.kernel.org/r/20250116235838.2769691-1-ctshao@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ac412a3361173e3000b16167af3d1f6f90af613 ]
MEM_WRITE attribute is defined as: "Non-presence of MEM_WRITE means that
MEM is only being read". bpf_load_hdr_opt() both reads and writes from
its arg2 - void *search_res.
This matters a lot for the next commit where we more precisely track
stack accesses. Without this annotation, the verifier will make false
assumptions about the contents of memory written to by helpers and
possibly prune valid branches.
Fixes: 6fad274f06f0 ("bpf: Add MEM_WRITE attribute")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/730e45f8c39be2a5f3d8c4406cceca9d574cbf14.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f31f33dbb3bab572bad9fe7b849ab0dcbe6fd279 ]
Some laptops have pins which are a wake source for S0i3/S3 but which
aren't a wake source for S4/S5 and which cause issues when left unmasked
during hibernation (S4).
For example HP EliteBook 855 G7 has pin #24 that causes instant wakeup
(hibernation failure) if left unmasked (it is a wake source only for
S0i3/S3).
GPIO pin #24 on this platform is likely dedicated to WWAN XMM7360
modem since this pin triggers wake notify to WWAN modem's parent PCIe
port.
Fix this by considering a pin a wake source only if it is marked as one
for the current suspend type (S0i3/S3 vs S4/S5).
Since Z-wake pins only make sense at runtime these were excluded from
both of suspend categories, so pins with only the Z-wake flag set are
effectively treated as non-wake pins.
Fixes: 2fff0b5e1a6b ("pinctrl: amd: Mask non-wake source pins with interrupt enabled at suspend")
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/d4b2d076366fdd08a0c1cd9b7ecd91dc95e07269.1736184752.git.mail@maciej.szmigiero.name
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf4d74256fe103ece7b2647550e6c063048e5682 ]
While 'stack_dump_size' is a u32 bitfield of 16 bits, u32 has a bigger
upper bound than the type u16 of loop counter 'offset' what in theory
may lead to infinite loop condition.
Found out by Coverity static analyzer.
Fixes: c8c960c109 ("ASoC: Intel: avs: APL-based platforms support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250109122216.3667847-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7576e2f4d99df6efabb77f52b9539fd345233aee ]
Servicing IPCs on CNL platforms and onward differs from the existing
one. To make room for these, enrich platform descriptor with fields
representing crucial IPC registers and utilize them throughout the code.
While cleaning up device descriptors, reduce the number of code lines by
assigning 'min_fw_version' within a single line.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240220115035.770402-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: bca0fa5f6b5e ("ASoC: Intel: avs: Do not readq() u32 registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c6a585d257f6845731f4e36b45fe42b5c3162f5 ]
When we're processing a perf.data file we will, for every thread in that
file do a machine__findnew_thread(machine, pid, tid) that when that pid
is seen for the first time will create a 'struct thread' representing
it.
That in turn will call nsinfo__new() -> nsinfo__init() and there it will
assume we're running live, which is wrong and will need to be addressed
in a followup patch.
The nsinfo__new() assumes that if we can't access that thread it has
already finished and will ignore the -1 return from nsinfo__init(), just
taking notes to avoid trying to enter in that namespace, since it isn't
there anymore, a race.
When doing this from 'perf inject', tho, we can fill in parts of that
nsinfo from what we get from the PERF_RECORD_MMAP2 (pid, tid) and in the
jitdump file name, that has the form of jit-<PID>.dump.
So if the pid in the jitdump file name is not the one in the
PERF_RECORD_MMAP2, we can assume that its the pid of the process
_inside_ the namespace, and that perf was runing outside that namespace.
This will be done in the following patch.
Reported-by: Francesco Nigro <fnigro@redhat.com>
Reported-by: Ilan Green <igreen@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Link: https://lore.kernel.org/r/20241206204828.507527-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 64a7617efd5a ("perf namespaces: Fixup the nsinfo__in_pidns() return type, its bool")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 058b38ccd2af9e5c95590b018e8425fa148d7aca ]
Recently we got a case where a kernel sample wasn't being resolved due
to a bug that was not setting the end address on kernel functions
implemented in assembly (see Link: tag), and then those were not being
found by machine__resolve() -> map__find_symbol().
So we ended up with:
# perf top --stdio
PerfTop: 0 irqs/s kernel: 0% exact: 0% lost: 0/0 drop: 0/0 [cycles/P]
-----------------------------------------------------------------------
Warning:
A vmlinux file was not found.
Kernel samples will not be resolved.
^Z
[1]+ Stopped perf top --stdio
#
But then resolving all other kernel symbols.
So just fixup the logic to only print that warning when there are no
symbols in the kernel map.
Fixes: d88205db9c ("perf dso: Add dso__has_symbols() method")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/lkml/Z3buKhcCsZi3_aGb@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ff6e943bce67d125781fe4780a5d6f072dc44c0 ]
padata_sysfs_store() was copied from padata_sysfs_show() but this check
was not adapted. Today there is no attribute which can fail this
check, but if there is one it may as well be correct.
Fixes: 5e017dc3f8 ("padata: Added sysfs primitives to padata subsystem")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9001d515443518d72222ba4d58e247696b625071 ]
CONFIG_SND_SEQ_UMP_CLIENT is a Kconfig for a sequencer client
corresponding to the UMP rawmidi, while we have another major knob
CONFIG_SND_SEQ_UMP that specifies whether the sequencer core supports
UMP packets or not. Strictly speaking both of them are independent,
but practically seen, it makes no sense to enable
CONFIG_SND_SEQ_UMP_CLIENT without UMP support itself.
This patch makes such an implicit dependency clearer. Now
CONFIG_SND_SEQ_UMP_CLIENT depends on both CONFIG_SND_UMP and
CONFIG_SND_SEQ_UMP. Meanwhile, CONFIG_SND_SEQ_UMP is enabled as
default when CONFIG_SND_UMP is set.
Fixes: 81fd444aa3 ("ALSA: seq: Bind UMP device")
Link: https://patch.msgid.link/20250101125548.25961-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 472a989029aac2b78ef2f0b18b27c568bf76d104 ]
init_ixp_crypto() calls of_parse_phandle_with_fixed_args() multiple
times, but does not release all the obtained refcounts. Fix it by adding
of_node_put() calls.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 76f24b4f46 ("crypto: ixp4xx - Add device tree support")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5a9d959936499a3106a1bf3b9070875d0d3dec4 ]
When the digest alg is HMAC-SHAx or another, the authsize may be less
than 4 bytes and mac_len of the BD is set to zero, the hardware considers
it a BD configuration error and reports a ras error, so the sec driver
needs to switch to software calculation in this case, this patch add a
check for it and remove unnecessary check that has been done by crypto.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd337f852b2677b53d0859a47b58e6e6bd189f30 ]
When the AEAD algorithm is used for encryption or decryption,
the input authentication length varies, the hardware needs to
obtain the input length to pass the integrity check verification.
Currently, the driver uses a fixed authentication length,which
causes decryption failure, so the length configuration is modified.
In addition, the step of setting the auth length is unnecessary,
so it was deleted from the setkey function.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bed82257b1881b689ee41f14ecb4c20a273cac0 ]
Add the printf of an error message and optimized the handling
process of ret.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: fd337f852b26 ("crypto: hisilicon/sec2 - fix for aead icv error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8eef6ac4d70eb1f0099fff93321d90ce8fa49ee1 ]
In PREEMPT_RT, kmalloc(GFP_ATOMIC) is still not safe in non preemptible
context. bpf_mem_alloc must be used in PREEMPT_RT. This patch is
to enforce bpf_mem_alloc in the bpf_local_storage when CONFIG_PREEMPT_RT
is enabled.
[ 35.118559] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 35.118566] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1832, name: test_progs
[ 35.118569] preempt_count: 1, expected: 0
[ 35.118571] RCU nest depth: 1, expected: 1
[ 35.118577] INFO: lockdep is turned off.
...
[ 35.118647] __might_resched+0x433/0x5b0
[ 35.118677] rt_spin_lock+0xc3/0x290
[ 35.118700] ___slab_alloc+0x72/0xc40
[ 35.118723] __kmalloc_noprof+0x13f/0x4e0
[ 35.118732] bpf_map_kzalloc+0xe5/0x220
[ 35.118740] bpf_selem_alloc+0x1d2/0x7b0
[ 35.118755] bpf_local_storage_update+0x2fa/0x8b0
[ 35.118784] bpf_sk_storage_get_tracing+0x15a/0x1d0
[ 35.118791] bpf_prog_9a118d86fca78ebb_trace_inet_sock_set_state+0x44/0x66
[ 35.118795] bpf_trace_run3+0x222/0x400
[ 35.118820] __bpf_trace_inet_sock_set_state+0x11/0x20
[ 35.118824] trace_inet_sock_set_state+0x112/0x130
[ 35.118830] inet_sk_state_store+0x41/0x90
[ 35.118836] tcp_set_state+0x3b3/0x640
There is no need to adjust the gfp_flags passing to the
bpf_mem_cache_alloc_flags() which only honors the GFP_KERNEL.
The verifier has ensured GFP_KERNEL is passed only in sleepable context.
It has been an old issue since the first introduction of the
bpf_local_storage ~5 years ago, so this patch targets the bpf-next.
bpf_mem_alloc is needed to solve it, so the Fixes tag is set
to the commit when bpf_mem_alloc was first used in the bpf_local_storage.
Fixes: 08a7ce384e ("bpf: Use bpf_mem_cache_alloc/free in bpf_local_storage_elem")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241218193000.2084281-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73a7496c218b7ca19ba276f54758e7f0adf269c5 ]
On iMX8DXL/QM/QXP(SECO) & iMX8ULP(ELE) SoCs, access to controller
region(CAAM page 0) is not permitted from non secure world.
use JobR's register space to access page 0 registers.
Fixes: 6a83830f64 ("crypto: caam - warn if blob_gen key is insecure")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d33dc1bc31df80356c49e40dbd3ddff19500bcb ]
With CONFIG_KPROBES_ON_FTRACE enabled on powerpc, ftrace_location_range
returns ftrace location for bpf_fentry_test1 at offset of 4 bytes from
function entry. This is because branch to _mcount function is at offset
of 4 bytes in function profile sequence.
To fix this, add entry_offset of 4 bytes while verifying the address for
kprobe entry address of bpf_fentry_test1 in verify_perf_link_info in
selftest, when CONFIG_KPROBES_ON_FTRACE is enabled.
Disassemble of bpf_fentry_test1:
c000000000e4b080 <bpf_fentry_test1>:
c000000000e4b080: a6 02 08 7c mflr r0
c000000000e4b084: b9 e2 22 4b bl c00000000007933c <_mcount>
c000000000e4b088: 01 00 63 38 addi r3,r3,1
c000000000e4b08c: b4 07 63 7c extsw r3,r3
c000000000e4b090: 20 00 80 4e blr
When CONFIG_PPC_FTRACE_OUT_OF_LINE [1] is enabled, these function profile
sequence is moved out of line with an unconditional branch at offset 0.
So, the test works without altering the offset for
'CONFIG_KPROBES_ON_FTRACE && CONFIG_PPC_FTRACE_OUT_OF_LINE' case.
Disassemble of bpf_fentry_test1:
c000000000f95190 <bpf_fentry_test1>:
c000000000f95190: 00 00 00 60 nop
c000000000f95194: 01 00 63 38 addi r3,r3,1
c000000000f95198: b4 07 63 7c extsw r3,r3
c000000000f9519c: 20 00 80 4e blr
[1] https://lore.kernel.org/all/20241030070850.1361304-13-hbathini@linux.ibm.com/
Fixes: 23cf7aa539 ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241209065720.234344-1-skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a2319308de88b9e819c0b43d0fccd857123eb31 ]
There have been intermittent issues with the SPDIF output on H3
and H2+ devices which has been fixed by setting the s_clk to 4
times the audio pll.
Add a quirk for the clock multiplier as not every supported SoC
requires it. Without the multiplier, the audio at normal sampling
rates was distorted and did not play at higher sampling rates.
Fixes: 1bd92af877 ("ASoC: sun4i-spdif: Add support for the H3 SoC")
Signed-off-by: George Lander <lander@jagmn.com>
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://patch.msgid.link/20241111165600.57219-2-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e10500b69c3f3378f3dcfc8c2fe4cdb74fc844f5 ]
Libelf functions do not set errno on failure. Instead, it relies on its
internal _elf_errno value, that can be retrieved via elf_errno (or the
corresponding message via elf_errmsg()). From "man libelf":
If a libelf function encounters an error it will set an internal
error code that can be retrieved with elf_errno. Each thread
maintains its own separate error code. The meaning of each error
code can be determined with elf_errmsg, which returns a string
describing the error.
As a consequence, libbpf should not return -errno when a function from
libelf fails, because an empty value will not be interpreted as an error
and won't prevent the program to stop. This is visible in
bpf_linker__add_file(), for example, where we call a succession of
functions that rely on libelf:
err = err ?: linker_load_obj_file(linker, filename, opts, &obj);
err = err ?: linker_append_sec_data(linker, &obj);
err = err ?: linker_append_elf_syms(linker, &obj);
err = err ?: linker_append_elf_relos(linker, &obj);
err = err ?: linker_append_btf(linker, &obj);
err = err ?: linker_append_btf_ext(linker, &obj);
If the object file that we try to process is not, in fact, a correct
object file, linker_load_obj_file() may fail with errno not being set,
and return 0. In this case we attempt to run linker_append_elf_sysms()
and may segfault.
This can happen (and was discovered) with bpftool:
$ bpftool gen object output.o sample_ret0.bpf.c
libbpf: failed to get ELF header for sample_ret0.bpf.c: invalid `Elf' handle
zsh: segmentation fault (core dumped) bpftool gen object output.o sample_ret0.bpf.c
Fix the issue by returning a non-null error code (-EINVAL) when libelf
functions fail.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241205135942.65262-1-qmo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2f0791124a1b6ca8d570110cbd487969d9d41ef ]
Commit f803bcf9208a ("selftests/bpf: Prevent client connect before
server bind in test_tc_tunnel.sh") added code that waits for the
netcat server to start before the netcat client attempts to connect to
it. However, not all calls to 'server_listen' were guarded.
This patch adds the existing 'wait_for_port' guard after the remaining
call to 'server_listen'.
Fixes: f803bcf9208a ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98ebe5ef6f5c4517ba92fb3e56f95827ebea83fd ]
USDT ELF note optionally can record an offset of .stapsdt.base, which is
used to make adjustments to USDT target attach address. Currently,
libbpf will do this address adjustment unconditionally if it finds
.stapsdt.base ELF section in target binary. But there is a corner case
where .stapsdt.base ELF section is present, but specific USDT note
doesn't reference it. In such case, libbpf will basically just add base
address and end up with absolutely incorrect USDT target address.
This adjustment has to be done only if both .stapsdt.sema section is
present and USDT note is recording a reference to it.
Fixes: 74cc6311ce ("libbpf: Add USDT notes parsing and resolution logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121224558.796110-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d640627663bfe7d8963c7615316d7d4ef60f3b0b ]
In case of possible unpredictably large arguments passed to
rose_setsockopt() and multiplied by extra values on top of that,
integer overflows may occur.
Do the safest minimum and fix these issues by checking the
contents of 'opt' and returning -EINVAL if they are too large. Also,
switch to unsigned int and remove useless check for negative 'opt'
in ROSE_IDLE case.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250115164220.19954-1-n.zhandarovich@fintech.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25c1a9ca53db5780757e7f53e688b8f916821baa ]
I noticed that HyStart incorrectly marks the start of rounds,
leading to inaccurate measurements of ACK train lengths and
resetting the `ca->sample_cnt` variable. This inaccuracy can impact
HyStart's functionality in terminating exponential cwnd growth during
Slow-Start, potentially degrading TCP performance.
The issue arises because the changes introduced in commit 4e1fddc98d
("tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows")
moved the caller of the `bictcp_hystart_reset` function inside the `hystart_update` function.
This modification added an additional condition for triggering the caller,
requiring that (tcp_snd_cwnd(tp) >= hystart_low_window) must also
be satisfied before invoking `bictcp_hystart_reset`.
This fix ensures that `bictcp_hystart_reset` is correctly called
at the start of a new round, regardless of the congestion window size.
This is achieved by moving the condition
(tcp_snd_cwnd(tp) >= hystart_low_window)
from before calling `bictcp_hystart_reset` to after it.
I tested with a client and a server connected through two Linux software routers.
In this setup, the minimum RTT was 150 ms, the bottleneck bandwidth was 50 Mbps,
and the bottleneck buffer size was 1 BDP, calculated as (50M / 1514 / 8) * 0.150 = 619 packets.
I conducted the test twice, transferring data from the server to the client for 1.5 seconds.
Before the patch was applied, HYSTART-DELAY stopped the exponential growth of cwnd when
cwnd = 516, and the bottleneck link was not yet saturated (516 < 619).
After the patch was applied, HYSTART-ACK-TRAIN stopped the exponential growth of cwnd when
cwnd = 632, and the bottleneck link was saturated (632 > 619).
In this test, applying the patch resulted in 300 KB more data delivered.
Fixes: 4e1fddc98d ("tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows")
Signed-off-by: Mahdi Arghavani <ma.arghavani@yahoo.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Haibo Zhang <haibo.zhang@otago.ac.nz>
Cc: David Eyers <david.eyers@otago.ac.nz>
Cc: Abbas Arghavani <abbas.arghavani@mdu.se>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4395a44acb15850e492dd1de9ec4b6479d96bc80 ]
When getting the IRQ we use k3_udma_glue_tx_get_irq() which returns
negative error value on error. So not NULL check is not sufficient
to deteremine if IRQ is valid. Check that IRQ is greater then zero
to ensure it is valid.
There is no issue at probe time but at runtime user can invoke
.set_channels which results in the following call chain.
am65_cpsw_set_channels()
am65_cpsw_nuss_update_tx_rx_chns()
am65_cpsw_nuss_remove_tx_chns()
am65_cpsw_nuss_init_tx_chns()
At this point if am65_cpsw_nuss_init_tx_chns() fails due to
k3_udma_glue_tx_get_irq() then tx_chn->irq will be set to a
negative value.
Then, at subsequent .set_channels with higher channel count we
will attempt to free an invalid IRQ in am65_cpsw_nuss_remove_tx_chns()
leading to a kernel warning.
The issue is present in the original commit that introduced this driver,
although there, am65_cpsw_nuss_update_tx_rx_chns() existed as
am65_cpsw_nuss_update_tx_chns().
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a4b61406395291ffb7220a10e8951a9a8684819 ]
The conntrack entry is already public, there is a small chance that another
CPU is handling a packet in reply direction and racing with the tcp state
update.
Move this under ct spinlock.
This is done once, when ct is about to be offloaded, so this should
not result in a noticeable performance hit.
Fixes: 8437a6209f ("netfilter: nft_flow_offload: set liberal tracking mode for tcp")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d738c1869f611955d91d8d0fd0012d9ef207201 ]
The existing rbtree implementation uses singleton elements to represent
ranges, however, userspace provides a set size according to the number
of ranges in the set.
Adjust provided userspace set size to the number of singleton elements
in the kernel by multiplying the range by two.
Check if the no-match all-zero element is already in the set, in such
case release one slot in the set size.
Fixes: 0ed6389c48 ("netfilter: nf_tables: rename set implementations")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d259f021aaa78904b6c836d975e8e00d83a182a ]
There is no need for asynchronous garbage collection, rbtree inserts
can only happen from the netlink control plane.
We already perform on-demand gc on insertion, in the area of the
tree where the insertion takes place, but we don't do a full tree
walk there for performance reasons.
Do a full gc walk at the end of the transaction instead and
remove the async worker.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 8d738c1869f6 ("netfilter: nf_tables: fix set size with rbtree backend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8079fc30f79799e59d9602e7e080d434936a482d ]
Next patch adds a cllaer that doesn't hold the priv->write lock and
will need a similar function.
Rename the existing function to make it clear that it can only
be used for opportunistic gc during insertion.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 8d738c1869f6 ("netfilter: nf_tables: fix set size with rbtree backend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 256001672153af5786c6ca148114693d7d76d836 ]
The set backend using this already has to work around this via ugly
cast, don't spread this pattern.
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 8d738c1869f6 ("netfilter: nf_tables: fix set size with rbtree backend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc50835e83f60f56e9bec2b392fb5544f250fb6f ]
Lion Ackermann was able to create a UAF which can be abused for privilege
escalation with the following script
Step 1. create root qdisc
tc qdisc add dev lo root handle 1:0 drr
step2. a class for packet aggregation do demonstrate uaf
tc class add dev lo classid 1:1 drr
step3. a class for nesting
tc class add dev lo classid 1:2 drr
step4. a class to graft qdisc to
tc class add dev lo classid 1:3 drr
step5.
tc qdisc add dev lo parent 1:1 handle 2:0 plug limit 1024
step6.
tc qdisc add dev lo parent 1:2 handle 3:0 drr
step7.
tc class add dev lo classid 3:1 drr
step 8.
tc qdisc add dev lo parent 3:1 handle 4:0 pfifo
step 9. Display the class/qdisc layout
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 limit 1000p
qdisc drr 3: dev lo parent 1:2
step10. trigger the bug <=== prevented by this patch
tc qdisc replace dev lo parent 1:3 handle 4:0
step 11. Redisplay again the qdiscs/classes
tc class ls dev lo
class drr 1:1 root leaf 2: quantum 64Kb
class drr 1:2 root leaf 3: quantum 64Kb
class drr 1:3 root leaf 4: quantum 64Kb
class drr 3:1 root leaf 4: quantum 64Kb
tc qdisc ls
qdisc drr 1: dev lo root refcnt 2
qdisc plug 2: dev lo parent 1:1
qdisc pfifo 4: dev lo parent 3:1 refcnt 2 limit 1000p
qdisc drr 3: dev lo parent 1:2
Observe that a) parent for 4:0 does not change despite the replace request.
There can only be one parent. b) refcount has gone up by two for 4:0 and
c) both class 1:3 and 3:1 are pointing to it.
Step 12. send one packet to plug
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10001))
step13. send one packet to the grafted fifo
echo "" | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888,priority=$((0x10003))
step14. lets trigger the uaf
tc class delete dev lo classid 1:3
tc class delete dev lo classid 1:1
The semantics of "replace" is for a del/add _on the same node_ and not
a delete from one node(3:1) and add to another node (1:3) as in step10.
While we could "fix" with a more complex approach there could be
consequences to expectations so the patch takes the preventive approach of
"disallow such config".
Joint work with Lion Ackermann <nnamrec@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250116013713.900000-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12e070eb6964b341b41677fd260af5a305316a1f ]
The following trace can be seen if a device is being unregistered while
its number of channels are being modified.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120
CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771
RIP: 0010:__mutex_lock+0xc8a/0x1120
Call Trace:
<TASK>
ethtool_check_max_channel+0x1ea/0x880
ethnl_set_channels+0x3c3/0xb10
ethnl_default_set_doit+0x306/0x650
genl_family_rcv_msg_doit+0x1e3/0x2c0
genl_rcv_msg+0x432/0x6f0
netlink_rcv_skb+0x13d/0x3b0
genl_rcv+0x28/0x40
netlink_unicast+0x42e/0x720
netlink_sendmsg+0x765/0xc20
__sys_sendto+0x3ac/0x420
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is because unregister_netdevice_many_notify might run before the
rtnl lock section of ethnl operations, eg. set_channels in the above
example. In this example the rss lock would be destroyed by the device
unregistration path before being used again, but in general running
ethnl operations while dismantle has started is not a good idea.
Fix this by denying any operation on devices being unregistered. A check
was already there in ethnl_ops_begin, but not wide enough.
Note that the same issue cannot be seen on the ioctl version
(__dev_ethtool) because the device reference is retrieved from within
the rtnl lock section there. Once dismantle started, the net device is
unlisted and no reference will be found.
Fixes: dde91ccfa2 ("ethtool: do not perform operations on net devices being unregistered")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250116092159.50890-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70d81f25cc92cc4e914516c9935ae752f27d78ad ]
Currently, mlxfw kernel module limits FW flash image size to be
10MB at most, preventing the ability to burn recent BlueField-3
FW that exceeds the said size limit.
Thus, drop the hard coded limit. Instead, rely on FW's
max_component_size threshold that is reported in MCQI register
as the size limit for FW image.
Fixes: 410ed13cae ("Add the mlxfw module for Mellanox firmware flash process")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1737030796-1441634-1-git-send-email-moshe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1f9f79fa2af8e3b45cffdeef66e05833480148a ]
The following problem was encountered during stability test:
(NULL net_device): NAPI poll function process_backlog+0x0/0x530 \
returned 1, exceeding its budget of 0.
------------[ cut here ]------------
list_add double add: new=ffff88905f746f48, prev=ffff88905f746f48, \
next=ffff88905f746e40.
WARNING: CPU: 18 PID: 5462 at lib/list_debug.c:35 \
__list_add_valid_or_report+0xf3/0x130
CPU: 18 UID: 0 PID: 5462 Comm: ping Kdump: loaded Not tainted 6.13.0-rc7+
RIP: 0010:__list_add_valid_or_report+0xf3/0x130
Call Trace:
? __warn+0xcd/0x250
? __list_add_valid_or_report+0xf3/0x130
enqueue_to_backlog+0x923/0x1070
netif_rx_internal+0x92/0x2b0
__netif_rx+0x15/0x170
loopback_xmit+0x2ef/0x450
dev_hard_start_xmit+0x103/0x490
__dev_queue_xmit+0xeac/0x1950
ip_finish_output2+0x6cc/0x1620
ip_output+0x161/0x270
ip_push_pending_frames+0x155/0x1a0
raw_sendmsg+0xe13/0x1550
__sys_sendto+0x3bf/0x4e0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x5b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reproduction command is as follows:
sysctl -w net.core.dev_weight=0
ping 127.0.0.1
This is because when the napi's weight is set to 0, process_backlog() may
return 0 and clear the NAPI_STATE_SCHED bit of napi->state, causing this
napi to be re-polled in net_rx_action() until __do_softirq() times out.
Since the NAPI_STATE_SCHED bit has been cleared, napi_schedule_rps() can
be retriggered in enqueue_to_backlog(), causing this issue.
Making the napi's weight always non-zero solves this problem.
Triggering this issue requires system-wide admin (setting is
not namespaced).
Fixes: e387660545 ("[NET]: Fix sysctl net.core.dev_weight")
Fixes: 3d48b53fb2 ("net: dev_weight: TX/RX orthogonality")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://patch.msgid.link/20250116143053.4146855-1-liujian56@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
