commit fbf8d71742557abaf558d8efb96742d442720cc2 upstream.
Calling irq_domain_remove() will lead to freeing the IRQ domain
prematurely. The domain is still referenced and will be attempted to get
used via rmi_free_function_list() -> rmi_unregister_function() ->
irq_dispose_mapping() -> irq_get_irq_data()'s ->domain pointer.
With PaX's MEMORY_SANITIZE this will lead to an access fault when
attempting to dereference embedded pointers, as in Torsten's report that
was faulting on the 'domain->ops->unmap' test.
Fix this by releasing the IRQ domain only after all related IRQs have
been deactivated.
Fixes: 24d28e4f12 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240222142654.856566-1-minipli@grsecurity.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9efbe2b8f0177fa97bfab290d60858900aa196b ]
This fixes the following issue discovered by code review:
after vqs have been created, a buggy device can send an interrupt.
A control vq callback will then try to schedule control_work which has
not been initialized yet. Similarly for config interrupt. Further, in
and out vq callbacks invoke find_port_by_vq which attempts to take
ports_lock which also has not been initialized.
To fix, init all locks and work before creating vqs.
Message-ID: <ad982e975a6160ad110c623c016041311ca15b4f.1726511547.git.mst@redhat.com>
Fixes: 17634ba255 ("virtio: console: Add a new MULTIPORT feature, support for generic ports")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87be7b189b2c50d4b51512f59e4e97db4eedee8a ]
__hci_cmd_sync_status shall only be used if hci_req_sync_lock is _not_
required which is not the case of hci_dev_cmd so it needs to use
hci_cmd_sync_status which uses hci_req_sync_lock internally.
Fixes: f1a8f402f13f ("Bluetooth: L2CAP: Fix deadlock")
Reported-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d851dd4dab63e95c1911a2fa847796d1ec5d58d ]
setup_loopback.sh and net_helper.sh are meant to be sourced from other
scripts, not executed directly. Therefore, remove the executable bits from
those files' permissions.
This change is similar to commit 49078c1b80b6 ("selftests: forwarding:
Remove executable bits from lib.sh")
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-4-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a5efc9e13f357abc396dbf445b25d08914c8060 ]
Currently, commands which depend on 'parse_options_subcommand()' don't
show the usage string, and instead show '(null)'
$ ./perf sched
Usage: (null)
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
'parse_options_subcommand()' is generally expected to initialise the usage
string, with information in the passed 'subcommands[]' array
This behaviour was changed in:
230a7a71f92212e7 ("libsubcmd: Fix parse-options memory leak")
Where the generated usage string is deallocated, and usage[0] string is
reassigned as NULL.
As discussed in [1], free the allocated usage string in the main
function itself, and don't reset usage string to NULL in
parse_options_subcommand
With this change, the behaviour is restored.
$ ./perf sched
Usage: perf sched [<options>] {record|latency|map|replay|script|timehist}
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
[1]: https://lore.kernel.org/linux-perf-users/htq5vhx6piet4nuq2mmhk7fs2bhfykv52dbppwxmo3s7du2odf@styd27tioc6e/
Fixes: 230a7a71f92212e7 ("libsubcmd: Fix parse-options memory leak")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904061836.55873-2-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b18c852cc6fb8284ac0ab97e3e840974a6a8a64 ]
The saved_cmdlines have three arrays for mapping PIDs to COMMs:
- map_pid_to_cmdline[]
- map_cmdline_to_pid[]
- saved_cmdlines
The map_pid_to_cmdline[] is PID_MAX_DEFAULT in size and holds the index
into the other arrays. The map_cmdline_to_pid[] is a mapping back to the
full pid as it can be larger than PID_MAX_DEFAULT. And the
saved_cmdlines[] just holds the COMMs associated to the pids.
Currently the map_pid_to_cmdline[] and saved_cmdlines[] are allocated
together (in reality the saved_cmdlines is just in the memory of the
rounding of the allocation of the structure as it is always allocated in
powers of two). The map_cmdline_to_pid[] array is allocated separately.
Since the rounding to a power of two is rather large (it allows for 8000
elements in saved_cmdlines), also include the map_cmdline_to_pid[] array.
(This drops it to 6000 by default, which is still plenty for most use
cases). This saves even more memory as the map_cmdline_to_pid[] array
doesn't need to be allocated.
Link: https://lore.kernel.org/linux-trace-kernel/20240212174011.068211d9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240220140703.182330529@goodmis.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Mete Durlu <meted@linux.ibm.com>
Fixes: 44dc5c41b5b1 ("tracing: Fix wasted memory in saved_cmdlines logic")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b91050448897663b60b6d15525c8c3ecae28a368 ]
The patch 51d976079976c800ef19ed1b542602fcf63f0edb ("ALSA: hda/realtek:
Add quirks for ASUS Zenbook 2022 Models") modified the entry 1043:1e2e
from "ASUS UM3402" to "ASUS UM6702RA/RC" and added another entry for
"ASUS UM3402" with 104e:1ee2.
The first entry was correct, while the new one corresponds to model
"ASUS UM6702RA/RC"
Fix the model names for both devices.
Fixes: 51d976079976 ("ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models")
Signed-off-by: Jean-Loïc Charroud <lagiraudiere+linux@free.fr>
Link: https://lore.kernel.org/r/1656546983.650349575.1707867732866.JavaMail.zimbra@free.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac631873c9e7a50d2a8de457cfc4b9f86666403e ]
The recent change to allow large frames without hardware checksumming
slotted in software checksumming in the driver if hardware could not
do it.
This will however upset TSO (TCP Segment Offloading). Typical
error dumps includes this:
skb len=2961 headroom=222 headlen=66 tailroom=0
(...)
WARNING: CPU: 0 PID: 956 at net/core/dev.c:3259 skb_warn_bad_offload+0x7c/0x108
gemini-ethernet-port: caps=(0x0000010000154813, 0x00002007ffdd7889)
And the packets do not go through.
The TSO implementation is bogus: a TSO enabled driver must propagate
the skb_shinfo(skb)->gso_size value to the TSO engine on the NIC.
Drop the size check and TSO offloading features for now: this
needs to be fixed up properly.
After this ethernet works fine on Gemini devices with a direct connected
PHY such as D-Link DNS-313.
Also tested to still be working with a DSA switch using the Gemini
ethernet as conduit interface.
Link: https://lore.kernel.org/netdev/CANn89iJLfxng1sYL5Zk0mknXpyYQPCp83m3KgD2KJ2_hKCpEUg@mail.gmail.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: d4d0c5b4d279 ("net: ethernet: cortina: Handle large frames")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5c26d2f1d3f5e4be3e196526bead29ecb139cf91 upstream.
We don't need to handle them separately. Instead, just let them
decompose/casefold to themselves.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream.
The fields in the hist_entry are filled on-demand which means they only
have meaningful values when relevant sort keys are used.
So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in
the hist entry can be garbage. So it shouldn't access it
unconditionally.
I got a segfault, when I wanted to see cgroup profiles.
$ sudo perf record -a --all-cgroups --synth=cgroup true
$ sudo perf report -s cgroup
Program received signal SIGSEGV, Segmentation fault.
0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
48 return RC_CHK_ACCESS(map)->dso;
(gdb) bt
#0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48
#1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344
#2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385
#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true)
at util/hist.c:644
#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761
#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0,
sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779
#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015
#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0)
at util/hist.c:1260
#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0,
machine=0x5555560388e8) at builtin-report.c:334
#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128,
sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232
#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128,
sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271
#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0,
file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354
#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132
#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245
#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324
#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342
#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60)
at util/session.c:780
#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688,
file_path=0x555556038ff0 "perf.data") at util/session.c:1406
As you can see the entry->ms.map was NULL even if he->ms.map has a
value. This is because 'sym' sort key is not given, so it cannot assume
whether he->ms.sym and entry->ms.sym is the same. I only checked the
'sym' sort key here as it implies 'dso' behavior (so maps are the same).
Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 221af82f606d928ccef19a16d35633c63026f1be upstream.
Since commit 3f8ca2e115 ("vhost/scsi: Extract common handling code
from control queue handler") a null pointer dereference bug can be
triggered when guest sends an SCSI AN request.
In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with
`&v_req.tmf.lun[1]` within a switch-case block and is then passed to
vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for
a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is
set to NULL in this branch. Later, in vhost_scsi_get_req(),
`vc->target` is dereferenced without being checked, leading to a null
pointer dereference bug. This bug can be triggered from guest.
When this bug occurs, the vhost_worker process is killed while holding
`vq->mutex` and the corresponding tpg will remain occupied
indefinitely.
Below is the KASAN report:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS
1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vhost_scsi_get_req+0x165/0x3a0
Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6
04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00
RSP: 0018:ffff888017affb50 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8
RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000
FS: 000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0
Call Trace:
<TASK>
? show_regs+0x86/0xa0
? die_addr+0x4b/0xd0
? exc_general_protection+0x163/0x260
? asm_exc_general_protection+0x27/0x30
? vhost_scsi_get_req+0x165/0x3a0
vhost_scsi_ctl_handle_vq+0x2a4/0xca0
? __pfx_vhost_scsi_ctl_handle_vq+0x10/0x10
? __switch_to+0x721/0xeb0
? __schedule+0xda5/0x5710
? __kasan_check_write+0x14/0x30
? _raw_spin_lock+0x82/0xf0
vhost_scsi_ctl_handle_kick+0x52/0x90
vhost_run_work_list+0x134/0x1b0
vhost_task_fn+0x121/0x350
...
</TASK>
---[ end trace 0000000000000000 ]---
Let's add a check in vhost_scsi_get_req.
Fixes: 3f8ca2e115 ("vhost/scsi: Extract common handling code from control queue handler")
Signed-off-by: Haoran Zhang <wh1sper@zju.edu.cn>
[whitespace fixes]
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <b26d7ddd-b098-4361-88f8-17ca7f90adf7@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3c4bdcc75 upstream.
Set the block size to that specified in on-disk superblock.
Also remove the hard constraint of PAGE_SIZE block size for the
uncompressed device backend. This constraint is temporarily remained
for compressed device and fscache backend, as there is more work needed
to handle the condition where the block size is not equal to PAGE_SIZE.
It is worth noting that the on-disk block size is read prior to
erofs_superblock_csum_verify(), as the read block size is needed in the
latter.
Besides, later we are going to make erofs refer to tar data blobs (which
is 512-byte aligned) for OCI containers, where the block size is 512
bytes. In this case, the 512-byte block size may not be adequate for a
directory to contain enough dirents. To fix this, we are also going to
introduce directory block size independent on the block size.
Due to we have already supported block size smaller than PAGE_SIZE now,
disable all these images with such separated directory block size until
we supported this feature later.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230313135309.75269-3-jefflexu@linux.alibaba.com
Stable-dep-of: 9ed50b8231e3 ("erofs: fix incorrect symlink detection in fast symlink")
[ Gao Xiang: apply this to 6.6.y to avoid further backport twists
due to obsoleted EROFS_BLKSIZ. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3acea5fc33 upstream.
As the first step of converting hardcoded blocksize to that specified in
on-disk superblock, convert all call sites of hardcoded blocksize to
sb->s_blocksize except for:
1) use sbi->blkszbits instead of sb->s_blocksize in
erofs_superblock_csum_verify() since sb->s_blocksize has not been
updated with the on-disk blocksize yet when the function is called.
2) use inode->i_blkbits instead of sb->s_blocksize in erofs_bread(),
since the inode operated on may be an anonymous inode in fscache mode.
Currently the anonymous inode is allocated from an anonymous mount
maintained in erofs, while in the near future we may allocate anonymous
inodes from a generic API directly and thus have no access to the
anonymous inode's i_sb. Thus we keep the block size in i_blkbits for
anonymous inodes in fscache mode.
Be noted that this patch only gets rid of the hardcoded blocksize, in
preparation for actually setting the on-disk block size in the following
patch. The hard limit of constraining the block size to PAGE_SIZE still
exists until the next patch.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230313135309.75269-2-jefflexu@linux.alibaba.com
[ Gao Xiang: fold a patch to fix incorrect truncated offsets. ]
Link: https://lore.kernel.org/r/20230413035734.15457-1-zhujia.zj@bytedance.com
Stable-dep-of: 9ed50b8231e3 ("erofs: fix incorrect symlink detection in fast symlink")
[ Gao Xiang: apply this to 6.6.y to avoid further backport twists
due to obsoleted EROFS_BLKSIZ. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit cf9c7b34b9.
This commit breaks UFS on RB5 in the 6.1 LTS kernels. The original patch
author suggests that this is not a stable kernel patch, hence reverting
it.
This was reported during testing with 6.1.103 / 5.15.165 LTS kernels
merged in the respective Android Common Kernel branches.
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 76959aff14a0012ad6b984ec7686d163deccdc16 ]
When a battery hook returns an error when adding a new battery, then
the battery hook is automatically unregistered.
However the battery hook provider cannot know that, so it will later
call battery_hook_unregister() on the already unregistered battery
hook, resulting in a crash.
Fix this by using the list head to mark already unregistered battery
hooks as already being unregistered so that they can be ignored by
battery_hook_unregister().
Fixes: fa93854f7a ("battery: Add the battery hooking API")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20241001212835.341788-3-W_Armin@gmx.de
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86309cbed26139e1caae7629dcca1027d9a28e75 ]
Move the conditional locking from __battery_hook_unregister()
into battery_hook_unregister() and rename the low-level function
to simplify the locking during battery hook removal.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20241001212835.341788-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 76959aff14a0 ("ACPI: battery: Fix possible crash when unregistering a battery hook")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fa052c29e509f3e47d56d7fc2ca28094d78c60a ]
Few times, core1 was scheduled to boot first before core0, which leads
to error:
'k3_r5_rproc_start: can not start core 1 before core 0'.
This was happening due to some scheduling between prepare and start
callback. The probe function waits for event, which is getting
triggered by prepare callback. To avoid above condition move event
trigger to start instead of prepare callback.
Fixes: 61f6f68447ab ("remoteproc: k3-r5: Wait for core0 power-up before powering up core1")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
[ Applied wakeup event trigger only for Split-Mode booted rprocs ]
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240820105004.2788327-1-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3f11cfe890733373ddbb1ce8991ccd4ee5e79e1 ]
Acquire the mailbox handle during device probe and do not release handle
in stop/detach routine or error paths. This removes the redundant
requests for mbox handle later during rproc start/attach. This also
allows to defer remoteproc driver's probe if mailbox is not probed yet.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240808074127.2688131-3-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Stable-dep-of: 8fa052c29e50 ("remoteproc: k3-r5: Delay notification of wakeup event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99d30e2fdea4086be4e66e2deb10de854b547ab8 ]
Rectify the logical value of reset-gpio so that it is set to
0 (disabled) during power-on and to 1 (enabled) during power-off.
Set the reset-gpio to GPIO_OUT_HIGH at initialization time to make
sure it starts off in reset. Also drop the "Set XCLR" comment which
is not-so-informative.
The existing usage of imx335 had reset-gpios polarity inverted
(GPIO_ACTIVE_HIGH) in their device-tree sources. With this patch
included, those DTS will not be able to stream imx335 anymore. The
reset-gpio polarity will need to be rectified in the device-tree
sources as shown in [1] example, in order to get imx335 functional
again (as it remains in reset prior to this fix).
Cc: stable@vger.kernel.org
Fixes: 45d19b5fb9 ("media: i2c: Add imx335 camera sensor driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/linux-media/20240729110437.199428-1-umang.jain@ideasonboard.com/
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fea91ee73b7cd19f08017221923d789f984abc54 ]
Provide support for enabling and disabling regulator supplies to control
power to the camera sensor.
While updating the power on function, document that a sleep is
represented as 'T4' in the datasheet power on sequence.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: 99d30e2fdea4 ("media: imx335: Fix reset-gpio handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3840cbe24cf060ea05a585ca497814609f5d47d1 ]
Brandon reports sporadic, non-sensical spikes in cumulative pressure
time (total=) when reading cpu.pressure at a high rate. This is due to
a race condition between reader aggregation and tasks changing states.
While it affects all states and all resources captured by PSI, in
practice it most likely triggers with CPU pressure, since scheduling
events are so frequent compared to other resource events.
The race context is the live snooping of ongoing stalls during a
pressure read. The read aggregates per-cpu records for stalls that
have concluded, but will also incorporate ad-hoc the duration of any
active state that hasn't been recorded yet. This is important to get
timely measurements of ongoing stalls. Those ad-hoc samples are
calculated on-the-fly up to the current time on that CPU; since the
stall hasn't concluded, it's expected that this is the minimum amount
of stall time that will enter the per-cpu records once it does.
The problem is that the path that concludes the state uses a CPU clock
read that is not synchronized against aggregators; the clock is read
outside of the seqlock protection. This allows aggregators to race and
snoop a stall with a longer duration than will actually be recorded.
With the recorded stall time being less than the last snapshot
remembered by the aggregator, a subsequent sample will underflow and
observe a bogus delta value, resulting in an erratic jump in pressure.
Fix this by moving the clock read of the state change into the seqlock
protection. This ensures no aggregation can snoop live stalls past the
time that's recorded when the state concludes.
Reported-by: Brandon Duffany <brandon@buildbuddy.io>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219194
Link: https://lore.kernel.org/lkml/20240827121851.GB438928@cmpxchg.org/
Fixes: df77430639 ("psi: Reduce calls to sched_clock() in psi")
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eca7de7cdc ]
Improve the average delay precision of getdelay tool to microsecond. When
using the getdelay tool, it is sometimes found that the average delay
except CPU is not 0, but display is 0, because the precison is too low.
For example, see delay average of SWAP below when using ZRAM.
print delayacct stats ON
PID 32915
CPU count real total virtual total delay total delay average
339202 2793871936 9233585504 7951112 0.000ms
IO count delay total delay average
41 419296904 10ms
SWAP count delay total delay average
242589 1045792384 0ms
This wrong display is misleading, so improve the millisecond precision of
the average delay to microsecond just like CPU. Then user would get more
accurate information of delay time.
Link: https://lkml.kernel.org/r/202302131408087983857@zte.com.cn
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 3840cbe24cf0 ("sched: psi: fix bogus pressure spikes from aggregation race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 905415ff3ffb1d7e5afa62bacabd79776bd24606 ]
Harden build ID parsing logic, adding explicit READ_ONCE() where it's
important to have a consistent value read and validated just once.
Also, as pointed out by Andi Kleen, we need to make sure that entire ELF
note is within a page bounds, so move the overflow check up and add an
extra note_size boundaries validation.
Fixes tag below points to the code that moved this code into
lib/buildid.c, and then subsequently was used in perf subsystem, making
this code exposed to perf_event_open() users in v5.12+.
Cc: stable@vger.kernel.org
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Jann Horn <jannh@google.com>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Fixes: bd7525dacd ("bpf: Move stack_map_get_build_id into lib")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 961a2851324561caed579764ffbee3db82b32829 ]
Neither ELF spec not ELF loader require program header to be placed right
after ELF header, but build-id code very much assumes such placement:
See
find_get_page(vma->vm_file->f_mapping, 0);
line and checks against PAGE_SIZE.
Returns errors for now until someone rewrites build-id parser
to be more inline with load_elf_binary().
Link: https://lkml.kernel.org/r/d58bc281-6ca7-467a-9a64-40fa214bd63e@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 905415ff3ffb ("lib/buildid: harden build ID parsing logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
