Vinod writes:
soundwire updates for 5.10-rc1
This round of update includes:
- Generic bandwidth allocation algorithm from Intel folks
- PM support for Intel chipsets
- Updates to Intel drivers which makes sdw usable on latest laptops
- Support for MMIO SDW controllers found in QC chipsets
- Update to subsystem to use helpers in bitfield.h to manage register
bits
* tag 'soundwire-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (66 commits)
soundwire: sysfs: add slave status and device number before probe
soundwire: bus: add enumerated Slave device to device list
soundwire: remove an unnecessary NULL check
soundwire: cadence: add data port test fail interrupt
soundwire: intel: enable test modes
soundwire: enable Data Port test modes
soundwire: intel: use {u32|u16}p_replace_bits
soundwire: cadence: use u32p_replace_bits
soundwire: qcom: get max rows and cols info from compatible
soundwire: qcom: add support to block packing mode
soundwire: qcom: clear BIT FIELDs before value set.
soundwire: Add generic bandwidth allocation algorithm
soundwire: cadence: add parity error injection through debugfs
soundwire: bus: export broadcast read/write capability for tests
ASoC: codecs: realtek-soundwire: ignore initial PARITY errors
soundwire: bus: use quirk to filter out invalid parity errors
soundwire: slave: add first_interrupt_done status
soundwire: bus: filter-out unwanted interrupt reports
ASoC/soundwire: bus: use property to set interrupt masks
soundwire: qcom: fix SLIBMUS/SLIMBUS typo
...
There are a number of subdirectories and files in drivers/char/ that
have their own maintainers and developers and ways of getting patches to
Linus. This includes random.c, IPMI, hardware random drivers, TPM
drivers, and agp drivers. Instead of sending those patches to Arnd and
myself, who can't do anything with them, send them to the proper
developers instead.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20200930121007.GA1615300@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit f188b5e76a ("coresight: etm4x: Save/restore state
across CPU low power states"), mistakenly TRCVMIDCCTLR1 register
value was saved in trcvmidcctlr0 state variable which is used to
store TRCVMIDCCTLR0 register value in etm4x_cpu_save() and then
same value is written back to both TRCVMIDCCTLR0 and TRCVMIDCCTLR1
in etm4x_cpu_restore(). There is already a trcvmidcctlr1 state
variable available for TRCVMIDCCTLR1, so use it.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200928163513.70169-26-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MIPI DisCo device properties that are read by the driver from
platform firmware, or hard-coded in the driver, should only be
provided as sysfs entries when a driver probes successfully.
However the device status and device number is updated even when there
is no driver present, and hence can be updated when a Slave device is
detected on the bus without being described in platform firmware and
without any driver registered/probed.
As suggested by GregKH, the attribute group for Slave status and
device number is is added by default upon device registration.
Credits to Vinod Koul for the status_show() function, shared in a
separate patch and used as is here. The status table was modified to
remove an unnecessary enum and status_show() is handled in a different
group attribute than what was suggested by Vinod.
Tested-by: Srinivas Kandgatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Co-developed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200924194430.121058-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently Slave devices are only added on startup, either from Device
Tree or ACPI entries. However Slave devices that are physically
present on the bus, but not described in platform firmware, will never
be added to the device list. The user/integrator can only know the
list of devices by looking a dynamic debug logs.
This patch suggests adding a Slave device even if there is no matching
DT or ACPI entry, so that we can see this in sysfs entry.
Initial code from Srinivas. Comments, fixes for ACPI probe and edits
of commit message by Pierre.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200924194430.121058-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix missing 'kfree_const(cell->name)' when call to
nvmem_cell_info_to_nvmem_cell() in several places:
* after nvmem_cell_info_to_nvmem_cell() failed during
nvmem_add_cells()
* during nvmem_device_cell_{read,write} when cell->name is
kstrdup'ed() without calling kfree_const() at the end, but
really there is no reason to do that 'dup, because the cell
instance is allocated on the stack for some short period to be
read/write without exposing it to the caller.
So the new nvmem_cell_info_to_nvmem_cell_nodup() helper is introduced
which is used to convert cell_info -> cell without name duplication as
a lighweight version of nvmem_cell_info_to_nvmem_cell().
Fixes: e2a5402ec7 ("nvmem: Add nvmem_device based consumer apis.")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20200923204456.14032-1-vadym.kochan@plvision.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oded writes:
This tag contains the following changes for kernel 5.10-rc1:
- release the kernel context object after we reset the device. This is
needed to prevent a race where the firmware still has some in-flight
transcations that require the kernel context (and its memory mappings) to
be alive.
- replace constant numbers with defines in QMAN initialization of GAUDI
- correct an error message text and add a few debug messages to help debug
issues that happen during context open and close.
* tag 'misc-habanalabs-next-2020-09-25' of git://people.freedesktop.org/~gabbayo/linux:
habanalabs/gaudi: configure QMAN LDMA registers properly
habanalabs: add notice of device not idle
habanalabs: add debug messages for opening/closing context
habanalabs: release kernel context after hw_fini
habanalabs: correct an error message
LDMA registers are configured with a fixed value.
We add new define set which gives the configuration
a proper meaning.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The device should be idle after a context is closed. If not, print a
notice.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
During debugging of error we sometimes need to know whether the error
happened when a user context was open. Add debug prints when opening and
closing user contexts.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Some engines use resources that belong to the kernel context (e.g. MMU
mappings). In case the halt-engines doesn't work properly due to H/W
restriction, we need to make sure the kernel context lives on until after
the hw_fini. The hw_fini resets the ASIC after that no engine is alive and
we can safely close the kernel context.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We don't try to allocate huge pages here so remove the huge word.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Georgi writes:
interconnect changes for 5.10
Here are the interconnect changes for the 5.10-rc1 merge window
consisting of core changes, new drivers and cleanups.
Core changes:
- New bulk API helpers for managing multiple interconnect paths.
- New xlate_extended() interface for parsing additional data from DT.
- Support for sync_state().
Driver changes:
- New drivers for SM8150 and SM8250 platforms.
- New drivers for the Qualcomm OSM and EPSS hardware blocks.
- Per-BCM scaling factor support.
- Misc cleanups.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.10-rc1' of https://git.linaro.org/people/georgi.djakov/linux: (28 commits)
interconnect: imx: simplify the return expression of imx_icc_unregister
interconnect: imx: Simplify with dev_err_probe()
interconnect: core: Simplify with dev_err_probe()
interconnect: qcom: Use icc_sync_state
interconnect: Add sync state support
interconnect: Add get_bw() callback
interconnect: qcom: osm-l3: Mark more structures const
interconnect: qcom: Add EPSS L3 support on SM8250
dt-bindings: interconnect: Add EPSS L3 DT binding on SM8250
interconnect: qcom: Lay the groundwork for adding EPSS support
interconnect: qcom: Add OSM L3 support on SM8150
dt-bindings: interconnect: Add OSM L3 DT binding on SM8150
interconnect: qcom: sc7180: Replace xlate with xlate_extended
interconnect: qcom: sdm845: Replace xlate with xlate_extended
interconnect: qcom: Implement xlate_extended() to parse tags
dt-bindings: interconnect: Document the support of optional path tag
interconnect: Introduce xlate_extended() callback
interconnect: qcom: Add support for per-BCM scaling factors
interconnect: qcom: Only wait for completion in AMC/WAKE by default
interconnect: qcom: Support bcm-voter-specific TCS wait behavior
...
Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it
will call pin_user_pages_fast() to map nr_pages. However,
pin_user_pages_fast() might fail with a return value -ERRNO.
The return value is stored in pinned_pages->nr_pages. which in
turn is passed to unpin_user_pages(), which expects
pinned_pages->nr_pages >=0, else disaster.
Fix this by assigning pinned_pages->nr_pages to 0 if
pin_user_pages_fast() returns -ERRNO.
Fixes: ba612aa8b4 ("misc: mic: SCIF memory registration and unregistration")
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lore.kernel.org/r/1600570295-29546-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
