[ Upstream commit 5de195060b2e251a835f622759550e6202167641 ]
The mmap_region() function is somewhat terrifying, with spaghetti-like
control flow and numerous means by which issues can arise and incomplete
state, memory leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
Taking advantage of previous patches in this series we move a number of
checks earlier in the code, simplifying things by moving the core of the
logic into a static internal function __mmap_region().
Doing this allows us to perform a number of checks up front before we do
any real work, and allows us to unwind the writable unmap check
unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE
validation unconditionally also.
We move a number of things here:
1. We preallocate memory for the iterator before we call the file-backed
memory hook, allowing us to exit early and avoid having to perform
complicated and error-prone close/free logic. We carefully free
iterator state on both success and error paths.
2. The enclosing mmap_region() function handles the mapping_map_writable()
logic early. Previously the logic had the mapping_map_writable() at the
point of mapping a newly allocated file-backed VMA, and a matching
mapping_unmap_writable() on success and error paths.
We now do this unconditionally if this is a file-backed, shared writable
mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however
doing so does not invalidate the seal check we just performed, and we in
any case always decrement the counter in the wrapper.
We perform a debug assert to ensure a driver does not attempt to do the
opposite.
3. We also move arch_validate_flags() up into the mmap_region()
function. This is only relevant on arm64 and sparc64, and the check is
only meaningful for SPARC with ADI enabled. We explicitly add a warning
for this arch if a driver invalidates this check, though the code ought
eventually to be fixed to eliminate the need for this.
With all of these measures in place, we no longer need to explicitly close
the VMA on error paths, as we place all checks which might fail prior to a
call to any driver mmap hook.
This eliminates an entire class of errors, makes the code easier to reason
about and more robust.
Link: https://lkml.kernel.org/r/6e0becb36d2f5472053ac5d544c0edfe9b899e25.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5baf8b037debf4ec60108ccfeccb8636d1dbad81 ]
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3dd6ed34ce1f2356a77fb88edafb5ec96784e3cf ]
Patch series "fix error handling in mmap_region() and refactor
(hotfixes)", v4.
mmap_region() is somewhat terrifying, with spaghetti-like control flow and
numerous means by which issues can arise and incomplete state, memory
leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
This series goes to great lengths to simplify how mmap_region() works and
to avoid unwinding errors late on in the process of setting up the VMA for
the new mapping, and equally avoids such operations occurring while the
VMA is in an inconsistent state.
The patches in this series comprise the minimal changes required to
resolve existing issues in mmap_region() error handling, in order that
they can be hotfixed and backported. There is additionally a follow up
series which goes further, separated out from the v1 series and sent and
updated separately.
This patch (of 5):
After an attempted mmap() fails, we are no longer in a situation where we
can safely interact with VMA hooks. This is currently not enforced,
meaning that we need complicated handling to ensure we do not incorrectly
call these hooks.
We can avoid the whole issue by treating the VMA as suspect the moment
that the file->f_ops->mmap() function reports an error by replacing
whatever VMA operations were installed with a dummy empty set of VMA
operations.
We do so through a new helper function internal to mm - mmap_file() -
which is both more logically named than the existing call_mmap() function
and correctly isolates handling of the vm_op reassignment to mm.
All the existing invocations of call_mmap() outside of mm are ultimately
nested within the call_mmap() from mm, which we now replace.
It is therefore safe to leave call_mmap() in place as a convenience
function (and to avoid churn). The invokers are:
ovl_file_operations -> mmap -> ovl_mmap() -> backing_file_mmap()
coda_file_operations -> mmap -> coda_file_mmap()
shm_file_operations -> shm_mmap()
shm_file_operations_huge -> shm_mmap()
dma_buf_fops -> dma_buf_mmap_internal -> i915_dmabuf_ops
-> i915_gem_dmabuf_mmap()
None of these callers interact with vm_ops or mappings in a problematic
way on error, quickly exiting out.
Link: https://lkml.kernel.org/r/cover.1730224667.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/d41fd763496fd0048a962f3fd9407dc72dd4fd86.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efc347b9efee1c2b081f5281d33be4559fa50a16 upstream.
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses mutex which was destroyed already
in module's remove() so use devm API instead.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-8-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
[ Resolve minor conflicts to fix CVE-2024-42129 ]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6630036b7c228f57c7893ee0403e92c2db2cd21d ]
If an iget fails due to not being able to retrieve information
from the server then the inode structure is only partially
initialized. When the inode gets evicted, references to
uninitialized structures (like fscache cookies) were being
made.
This patch checks for a bad_inode before doing anything other
than clearing the inode from the cache. Since the inode is
bad, it shouldn't have any state associated with it that needs
to be written back (and there really isn't a way to complete
those anyways).
Reported-by: syzbot+eb83fe1cce5833cd66a0@syzkaller.appspotmail.com
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[Xiangyu: CVE-2024-36923 Minor conflict resolution ]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4aa923a6e6406b43566ef6ac35a3d9a3197fa3e8 upstream.
KASAN reports that the GPU metrics table allocated in
vangogh_tables_init() is not large enough for the memset done in
smu_cmn_init_soft_gpu_metrics(). Condensed report follows:
[ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu]
[ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067
...
[ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544
[ 33.861816] Tainted: [W]=WARN
[ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023
[ 33.861822] Call Trace:
[ 33.861826] <TASK>
[ 33.861829] dump_stack_lvl+0x66/0x90
[ 33.861838] print_report+0xce/0x620
[ 33.861853] kasan_report+0xda/0x110
[ 33.862794] kasan_check_range+0xfd/0x1a0
[ 33.862799] __asan_memset+0x23/0x40
[ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779]
[ 33.867135] dev_attr_show+0x43/0xc0
[ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0
[ 33.867155] seq_read_iter+0x3f8/0x1140
[ 33.867173] vfs_read+0x76c/0xc50
[ 33.867198] ksys_read+0xfb/0x1d0
[ 33.867214] do_syscall_64+0x90/0x160
...
[ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s:
[ 33.867358] kasan_save_stack+0x33/0x50
[ 33.867364] kasan_save_track+0x17/0x60
[ 33.867367] __kasan_kmalloc+0x87/0x90
[ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu]
[ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu]
[ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu]
[ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu]
[ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu]
[ 33.869608] local_pci_probe+0xda/0x180
[ 33.869614] pci_device_probe+0x43f/0x6b0
Empirically we can confirm that the former allocates 152 bytes for the
table, while the latter memsets the 168 large block.
Root cause appears that when GPU metrics tables for v2_4 parts were added
it was not considered to enlarge the table to fit.
The fix in this patch is rather "brute force" and perhaps later should be
done in a smarter way, by extracting and consolidating the part version to
size logic to a common helper, instead of brute forcing the largest
possible allocation. Nevertheless, for now this works and fixes the out of
bounds write.
v2:
* Drop impossible v3_0 case. (Mario)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 41cec40bc9 ("drm/amd/pm: Vangogh: Add new gpu_metrics_v2_4 to acquire gpu_metrics")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Wenyou Yang <WenYou.Yang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241025145639.19124-1-tursulin@igalia.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0880f58f9609f0200483a49429af0f050d281703)
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db3eab8110bc0520416101b6a5b52f44a43fb4cf upstream.
In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are
used as expected to iterate over the list of local addresses, but
list_for_each_entry() was used instead of list_for_each_entry_rcu() in
__lookup_addr(). It is important to use this variant which adds the
required READ_ONCE() (and diagnostic checks if enabled).
Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it
is called under the pernet->lock and not rcu_read_lock(), an extra
condition is then passed to help the diagnostic checks making sure
either the associated spin lock or the RCU lock is held.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-3-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af250c27ea1c404e210fc3a308b20f772df584d6 upstream.
When the lookup_by_id parameter of __lookup_addr() is true, it's the same
as __lookup_addr_by_id(), it can be replaced by __lookup_addr_by_id()
directly. So drop this parameter, let __lookup_addr() only looks up address
on the local address list by comparing addresses in it, not address ids.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-4-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: db3eab8110bc ("mptcp: pm: use _rcu variant under rcu_read_lock")
[ Conflicts in pm_netlink.c, because commit 6a42477fe449 ("mptcp: update
set_flags interfaces") is not in this version, and causes too many
conflicts when backporting it. The conflict is easy to resolve: addr
is a pointer here here in mptcp_pm_nl_set_flags(), the rest of the
code is the same. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0266319413d5d687ba7b6df7ca99e4b9724a4f2 upstream.
Just like in-kernel pm, when userspace pm does set_flags, it needs to send
out MP_PRIO signal, and also modify the flags of the corresponding address
entry in the local address list. This patch implements the missing logic.
Traverse all address entries on userspace_pm_local_addr_list to find the
local address entry, if bkup is true, set the flags of this entry with
FLAG_BACKUP, otherwise, clear FLAG_BACKUP.
Fixes: 892f396c8e ("mptcp: netlink: issue MP_PRIO signals from userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-1-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_userspace.c, because commit 6a42477fe449 ("mptcp:
update set_flags interfaces"), is not in this version, and causes too
many conflicts when backporting it. The same code can still be added
at the same place, before sending the ACK. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06afe09091ee69dc7ab058b4be9917ae59cc81e5 upstream.
Corresponding __lookup_addr_by_id() helper in the in-kernel netlink PM,
this patch adds a new helper mptcp_userspace_pm_lookup_addr_by_id() to
lookup the address entry with the given id on the userspace pm local
address list.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f642c5c4d528 ("mptcp: hold pm lock when deleting entry")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8286f8b622990194207df9ab852e0f87c60d35e9 ]
The error flow in nfsd4_copy() calls cleanup_async_copy(), which
already decrements nn->pending_async_copies.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 63fab04cbd0f96191b6e5beedc3b643b01c15889 ]
Ensure the refcount and async_copies fields are initialized early.
cleanup_async_copy() will reference these fields if an error occurs
in nfsd4_copy(). If they are not correctly initialized, at the very
least, a refcount underflow occurs.
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit aadc3bbea163b6caaaebfdd2b6c4667fbc726752 ]
Nothing appears to limit the number of concurrent async COPY
operations that clients can start. In addition, AFAICT each async
COPY can copy an unlimited number of 4MB chunks, so can run for a
long time. Thus IMO async COPY can become a DoS vector.
Add a restriction mechanism that bounds the number of concurrent
background COPY operations. Start simple and try to be fair -- this
patch implements a per-namespace limit.
An async COPY request that occurs while this limit is exceeded gets
NFS4ERR_DELAY. The requesting client can choose to send the request
again after a delay or fall back to a traditional read/write style
copy.
If there is need to make the mechanism more sophisticated, we can
visit that in future patches.
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://nvd.nist.gov/vuln/detail/CVE-2024-49974
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ed666eba4e0a2bb8ffaa3739d830b64d4f2aaad ]
Currently, when NFSD handles an asynchronous COPY, it returns a
zero write verifier, relying on the subsequent CB_OFFLOAD callback
to pass the write verifier and a stable_how4 value to the client.
However, if the CB_OFFLOAD never arrives at the client (for example,
if a network partition occurs just as the server sends the
CB_OFFLOAD operation), the client will never receive this verifier.
Thus, if the client sends a follow-up COMMIT, there is no way for
the client to assess the COMMIT result.
The usual recovery for a missing CB_OFFLOAD is for the client to
send an OFFLOAD_STATUS operation, but that operation does not carry
a write verifier in its result. Neither does it carry a stable_how4
value, so the client /must/ send a COMMIT in this case -- which will
always fail because currently there's still no write verifier in the
COPY result.
Thus the server needs to return a normal write verifier in its COPY
result even if the COPY operation is to be performed asynchronously.
If the server recognizes the callback stateid in subsequent
OFFLOAD_STATUS operations, then obviously it has not restarted, and
the write verifier the client received in the COPY result is still
valid and can be used to assess a COMMIT of the copied data, if one
is needed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
[ cel: adjusted to apply to origin/linux-6.6.y ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parse_build_id_buf does not account Elf32_Nhdr header size
when getting the build id data pointer and returns wrong build
id data as result.
This is problem only for stable trees that merged c83a80d8b8
fix, the upstream build id code was refactored and returns proper
build id.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Fixes: c83a80d8b8 ("lib/buildid: harden build ID parsing logic")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4e2766102da632f26341d5539519b0abf73df887 ]
The whole benefit of this encapsulating struct is questionable.
It just stores a flag to signalize the init state of vchiq_arm_state.
Beside the fact this flag is set too soon, the access to uninitialized
members should be avoided. So initialize vchiq_arm_state properly before
assign it directly to vchiq_state.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240621131958.98208-6-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 404b739e8955 ("staging: vchiq_arm: Use devm_kzalloc() for vchiq_arm_state allocation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3488af0970445ff5532c7e8dc5e6456b877aee5e ]
Patch series "mm/damon/core: fix handling of zero non-sampling intervals".
DAMON's internal intervals accounting logic is not correctly handling
non-sampling intervals of zero values for a wrong assumption. This could
cause unexpected monitoring behavior, and even result in infinite hang of
DAMON sysfs interface user threads in case of zero aggregation interval.
Fix those by updating the intervals accounting logic. For details of the
root case and solutions, please refer to commit messages of fixes.
This patch (of 2):
DAMON's logics to determine if this is the time to do aggregation and ops
update assumes next_{aggregation,ops_update}_sis are always set larger
than current passed_sample_intervals. And therefore it further assumes
continuously incrementing passed_sample_intervals every sampling interval
will make it reaches to the next_{aggregation,ops_update}_sis in future.
The logic therefore make the action and update
next_{aggregation,ops_updaste}_sis only if passed_sample_intervals is same
to the counts, respectively.
If Aggregation interval or Ops update interval are zero, however,
next_aggregation_sis or next_ops_update_sis are set same to current
passed_sample_intervals, respectively. And passed_sample_intervals is
incremented before doing the next_{aggregation,ops_update}_sis check.
Hence, passed_sample_intervals becomes larger than
next_{aggregation,ops_update}_sis, and the logic says it is not the time
to do the action and update next_{aggregation,ops_update}_sis forever,
until an overflow happens. In other words, DAMON stops doing aggregations
or ops updates effectively forever, and users cannot get monitoring
results.
Based on the documents and the common sense, a reasonable behavior for
such inputs is doing an aggregation and an ops update for every sampling
interval. Handle the case by removing the assumption.
Note that this could incur particular real issue for DAMON sysfs interface
users, in case of zero Aggregation interval. When user starts DAMON with
zero Aggregation interval and asks online DAMON parameter tuning via DAMON
sysfs interface, the request is handled by the aggregation callback.
Until the callback finishes the work, the user who requested the online
tuning just waits. Hence, the user will be stuck until the
passed_sample_intervals overflows.
Link: https://lkml.kernel.org/r/20241031183757.49610-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20241031183757.49610-2-sj@kernel.org
Fixes: 4472edf63d66 ("mm/damon/core: use number of passed access sampling as a timer")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42f994b71404b17abcd6b170de7a6aa95ffe5d4a ]
DAMON-based operation schemes are applied for every aggregation interval.
That was mainly because schemes were using nr_accesses, which be complete
to be used for every aggregation interval. However, the schemes are now
using nr_accesses_bp, which is updated for each sampling interval in a way
that reasonable to be used. Therefore, there is no reason to apply
schemes for each aggregation interval.
The unnecessary alignment with aggregation interval was also making some
use cases of DAMOS tricky. Quotas setting under long aggregation interval
is one such example. Suppose the aggregation interval is ten seconds, and
there is a scheme having CPU quota 100ms per 1s. The scheme will actually
uses 100ms per ten seconds, since it cannobe be applied before next
aggregation interval. The feature is working as intended, but the results
might not that intuitive for some users. This could be fixed by updating
the quota to 1s per 10s. But, in the case, the CPU usage of DAMOS could
look like spikes, and would actually make a bad effect to other
CPU-sensitive workloads.
Implement a dedicated timing interval for each DAMON-based operation
scheme, namely apply_interval. The interval will be sampling interval
aligned, and each scheme will be applied for its apply_interval. The
interval is set to 0 by default, and it means the scheme should use the
aggregation interval instead. This avoids old users getting any
behavioral difference.
Link: https://lkml.kernel.org/r/20230916020945.47296-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 3488af097044 ("mm/damon/core: handle zero {aggregation,ops_update} intervals")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 16dd2825c23530f2259fc671960a3a65d2af69bd upstream.
At some point, the IEEE ID identification for the replay check in the
AMD EDID was added. However, this check causes the following
out-of-bounds issues when using KASAN:
[ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu]
[ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383
...
[ 27.821207] Memory state around the buggy address:
[ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821243] ^
[ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821268] ==================================================================
This is caused because the ID extraction happens outside of the range of
the edid lenght. This commit addresses this issue by considering the
amd_vsdb_block size.
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7e381b1ccd5e778e3d9c44c669ad38439a861d8)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7c7c5aa556378a2c8da72c1f7f238b6648f95fb upstream.
The check condition should be 'i < bc->onecell_data.num_domains', not
'bc->onecell_data.num_domains' which will make the look never finish
and cause kernel panic.
Also disable runtime to address
"imx93-blk-ctrl 4ac10000.system-controller: Unbalanced pm_runtime_enable!"
Fixes: e9aa77d413 ("soc: imx: add i.MX93 media blk ctrl driver")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable@vger.kernel.org
Message-ID: <20241101101252.1448466-1-peng.fan@oss.nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85b580afc2c215394e08974bf033de9face94955 upstream.
It turns out that the Allwinner A100/A133 SoC only supports 8K DMA
blocks (13 bits wide), for both the SD/SDIO and eMMC instances.
And while this alone would make a trivial fix, the H616 falls back to
the A100 compatible string, so we have to now match the H616 compatible
string explicitly against the description advertising 64K DMA blocks.
As the A100 is now compatible with the D1 description, let the A100
compatible string point to that block instead, and introduce an explicit
match against the H616 string, pointing to the old description.
Also remove the redundant setting of clk_delays to NULL on the way.
Fixes: 3536b82e58 ("mmc: sunxi: add support for A100 mmc controller")
Cc: stable@vger.kernel.org
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Parthiban Nallathambi <parthiban@linumiz.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Message-ID: <20241107014240.24669-1-andre.przywara@arm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a410656643ce4844ba9875aa4e87a7779308259b upstream.
Make KASAN work with 5-level page-tables, including:
1. Implement and use __pgd_none() and kasan_p4d_offset().
2. As done in kasan_pmd_populate() and kasan_pte_populate(), restrict
the loop conditions of kasan_p4d_populate() and kasan_pud_populate()
to avoid unnecessary population.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 227ca9f6f6aeb8aa8f0c10430b955f1fe2aeab91 upstream.
If PGDIR_SIZE is too large for cpu_vabits, KASAN_SHADOW_END will
overflow UINTPTR_MAX because KASAN_SHADOW_START/KASAN_SHADOW_END are
aligned up by PGDIR_SIZE. And then the overflowed KASAN_SHADOW_END looks
like a user space address.
For example, PGDIR_SIZE of CONFIG_4KB_4LEVEL is 2^39, which is too large
for Loongson-2K series whose cpu_vabits = 39.
Since CONFIG_4KB_4LEVEL is completely legal for CPUs with cpu_vabits <=
39, we just disable KASAN via early return in kasan_init(). Otherwise we
get a boot failure.
Moreover, we change KASAN_SHADOW_END from the first address after KASAN
shadow area to the last address in KASAN shadow area, in order to avoid
the end address exactly overflow to 0 (which is a legal case). We don't
need to worry about alignment because pgd_addr_end() can handle it.
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30cec747d6bf2c3e915c075d76d9712e54cde0a6 upstream.
early_numa_add_cpu() applies on physical CPU id rather than logical CPU
id, so use cpuid instead of cpu.
Cc: stable@vger.kernel.org
Fixes: 3de9c42d02a79a5 ("LoongArch: Add all CPUs enabled by fdt to NUMA node 0")
Reported-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2026559a6c4ce34db117d2db8f710fe2a9420d5a upstream.
When using the "block:block_dirty_buffer" tracepoint, mark_buffer_dirty()
may cause a NULL pointer dereference, or a general protection fault when
KASAN is enabled.
This happens because, since the tracepoint was added in
mark_buffer_dirty(), it references the dev_t member bh->b_bdev->bd_dev
regardless of whether the buffer head has a pointer to a block_device
structure.
In the current implementation, nilfs_grab_buffer(), which grabs a buffer
to read (or create) a block of metadata, including b-tree node blocks,
does not set the block device, but instead does so only if the buffer is
not in the "uptodate" state for each of its caller block reading
functions. However, if the uptodate flag is set on a folio/page, and the
buffer heads are detached from it by try_to_free_buffers(), and new buffer
heads are then attached by create_empty_buffers(), the uptodate flag may
be restored to each buffer without the block device being set to
bh->b_bdev, and mark_buffer_dirty() may be called later in that state,
resulting in the bug mentioned above.
Fix this issue by making nilfs_grab_buffer() always set the block device
of the super block structure to the buffer head, regardless of the state
of the buffer's uptodate flag.
Link: https://lkml.kernel.org/r/20241106160811.3316-3-konishi.ryusuke@gmail.com
Fixes: 5305cb8308 ("block: add block_{touch|dirty}_buffer tracepoint")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ubisectech Sirius <bugreport@valiantsec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 247d720b2c5d22f7281437fd6054a138256986ba upstream.
When deleting a vma entry from a maple tree, it has to pass NULL to
vma_iter_prealloc() in order to calculate internal state of the tree, but
it passed a wrong argument. As a result, nommu kernels crashed upon
accessing a vma iterator, such as acct_collect() reading the size of vma
entries after do_munmap().
This commit fixes this issue by passing a right argument to the
preallocation call.
Link: https://lkml.kernel.org/r/20241108222834.3625217-1-thehajime@gmail.com
Fixes: b5df092264 ("mm: set up vma iterator for vma_iter_prealloc() calls")
Signed-off-by: Hajime Tazaki <thehajime@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa0d42cacf093a6fcca872edc954f6f812926a17 upstream.
Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support
for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are
myriad bugs in the implementation, some of which are fatal to the guest,
and others which put the stability and health of the host at risk.
For guest fatalities, the most glaring issue is that KVM fails to ensure
tracing is disabled, and *stays* disabled prior to VM-Enter, which is
necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing
is enabled (enforced via a VMX consistency check). Per the SDM:
If the logical processor is operating with Intel PT enabled (if
IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load
IA32_RTIT_CTL" VM-entry control must be 0.
On the host side, KVM doesn't validate the guest CPUID configuration
provided by userspace, and even worse, uses the guest configuration to
decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring
guest CPUID to enumerate more address ranges than are supported in hardware
will result in KVM trying to passthrough, save, and load non-existent MSRs,
which generates a variety of WARNs, ToPA ERRORs in the host, a potential
deadlock, etc.
Fixes: f99e3daf94 ("KVM: x86: Add Intel PT virtualization work mode")
Cc: stable@vger.kernel.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241101185031.1799556-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3ddef46f22e8c3124e0df1f325bc6a18dadff39 upstream.
Always set irr_pending (to true) when updating APICv status to fix a bug
where KVM fails to set irr_pending when userspace sets APIC state and
APICv is disabled, which ultimate results in KVM failing to inject the
pending interrupt(s) that userspace stuffed into the vIRR, until another
interrupt happens to be emulated by KVM.
Only the APICv-disabled case is flawed, as KVM forces apic->irr_pending to
be true if APICv is enabled, because not all vIRR updates will be visible
to KVM.
Hit the bug with a big hammer, even though strictly speaking KVM can scan
the vIRR and set/clear irr_pending as appropriate for this specific case.
The bug was introduced by commit 755c2bf878 ("KVM: x86: lapic: don't
touch irr_pending in kvm_apic_update_apicv when inhibiting it"), which as
the shortlog suggests, deleted code that updated irr_pending.
Before that commit, kvm_apic_update_apicv() did indeed scan the vIRR, with
with the crucial difference that kvm_apic_update_apicv() did the scan even
when APICv was being *disabled*, e.g. due to an AVIC inhibition.
struct kvm_lapic *apic = vcpu->arch.apic;
if (vcpu->arch.apicv_active) {
/* irr_pending is always true when apicv is activated. */
apic->irr_pending = true;
apic->isr_count = 1;
} else {
apic->irr_pending = (apic_search_irr(apic) != -1);
apic->isr_count = count_vectors(apic->regs + APIC_ISR);
}
And _that_ bug (clearing irr_pending) was introduced by commit b26a695a1d
("kvm: lapic: Introduce APICv update helper function"), prior to which KVM
unconditionally set irr_pending to true in kvm_apic_set_state(), i.e.
assumed that the new virtual APIC state could have a pending IRQ.
Furthermore, in addition to introducing this issue, commit 755c2bf878
also papered over the underlying bug: KVM doesn't ensure CPUs and devices
see APICv as disabled prior to searching the IRR. Waiting until KVM
emulates an EOI to update irr_pending "works", but only because KVM won't
emulate EOI until after refresh_apicv_exec_ctrl(), and there are plenty of
memory barriers in between. I.e. leaving irr_pending set is basically
hacking around bad ordering.
So, effectively revert to the pre-b26a695a1d78 behavior for state restore,
even though it's sub-optimal if no IRQs are pending, in order to provide a
minimal fix, but leave behind a FIXME to document the ugliness. With luck,
the ordering issue will be fixed and the mess will be cleaned up in the
not-too-distant future.
Fixes: 755c2bf878 ("KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Reported-by: Yong He <zhuangel570@gmail.com>
Closes: https://lkml.kernel.org/r/20241023124527.1092810-1-alexyonghe%40tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20241106015135.2462147-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2657b82a78f18528bef56dc1b017158490970873 upstream.
When getting the current VPID, e.g. to emulate a guest TLB flush, return
vpid01 if L2 is running but with VPID disabled, i.e. if VPID is disabled
in vmcs12. Architecturally, if VPID is disabled, then the guest and host
effectively share VPID=0. KVM emulates this behavior by using vpid01 when
running an L2 with VPID disabled (see prepare_vmcs02_early_rare()), and so
KVM must also treat vpid01 as the current VPID while L2 is active.
Unconditionally treating vpid02 as the current VPID when L2 is active
causes KVM to flush TLB entries for vpid02 instead of vpid01, which
results in TLB entries from L1 being incorrectly preserved across nested
VM-Enter to L2 (L2=>L1 isn't problematic, because the TLB flush after
nested VM-Exit flushes vpid01).
The bug manifests as failures in the vmx_apicv_test KVM-Unit-Test, as KVM
incorrectly retains TLB entries for the APIC-access page across a nested
VM-Enter.
Opportunisticaly add comments at various touchpoints to explain the
architectural requirements, and also why KVM uses vpid01 instead of vpid02.
All credit goes to Chao, who root caused the issue and identified the fix.
Link: https://lore.kernel.org/all/ZwzczkIlYGX+QXJz@intel.com
Fixes: 2b4a5a5d56 ("KVM: nVMX: Flush current VPID (L1 vs. L2) for KVM_REQ_TLB_FLUSH_GUEST")
Cc: stable@vger.kernel.org
Cc: Like Xu <like.xu.linux@gmail.com>
Debugged-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Tested-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241031202011.1580522-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 923168a0631bc42fffd55087b337b1b6c54dcff5 upstream.
Function ima_eventdigest_init() calls ima_eventdigest_init_common()
with HASH_ALGO__LAST which is then used to access the array
hash_digest_size[] leading to buffer overrun. Have a conditional
statement to handle this.
Fixes: 9fab303a2c ("ima: fix violation measurement list record")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Tested-by: Enrico Bravi (PhD at polito.it) <enrico.bravi@huawei.com>
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29ce8b8a4fa74e841342c8b8f8941848a3c6f29f upstream.
When calculating the physical address range based on the iotlb and mr
[start,end) ranges, the offset of mr->start relative to map->start
is not taken into account. This leads to some incorrect and duplicate
mappings.
For the case when mr->start < map->start the code is already correct:
the range in [mr->start, map->start) was handled by a different
iteration.
Fixes: 94abbccdf2 ("vdpa/mlx5: Add shared memory registration code")
Cc: stable@vger.kernel.org
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20241021134040.975221-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 737f34137844d6572ab7d473c998c7f977ff30eb upstream.
Syzbot has reported the following BUG:
kernel BUG at fs/ocfs2/uptodate.c:509!
...
Call Trace:
<TASK>
? __die_body+0x5f/0xb0
? die+0x9e/0xc0
? do_trap+0x15a/0x3a0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? do_error_trap+0x1dc/0x2c0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? __pfx_do_error_trap+0x10/0x10
? handle_invalid_op+0x34/0x40
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? exc_invalid_op+0x38/0x50
? asm_exc_invalid_op+0x1a/0x20
? ocfs2_set_new_buffer_uptodate+0x2e/0x160
? ocfs2_set_new_buffer_uptodate+0x144/0x160
? ocfs2_set_new_buffer_uptodate+0x145/0x160
ocfs2_group_add+0x39f/0x15a0
? __pfx_ocfs2_group_add+0x10/0x10
? __pfx_lock_acquire+0x10/0x10
? mnt_get_write_access+0x68/0x2b0
? __pfx_lock_release+0x10/0x10
? rcu_read_lock_any_held+0xb7/0x160
? __pfx_rcu_read_lock_any_held+0x10/0x10
? smack_log+0x123/0x540
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x226/0x2b0
ocfs2_ioctl+0x65e/0x7d0
? __pfx_ocfs2_ioctl+0x10/0x10
? smack_file_ioctl+0x29e/0x3a0
? __pfx_smack_file_ioctl+0x10/0x10
? lockdep_hardirqs_on_prepare+0x43d/0x780
? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
? __pfx_ocfs2_ioctl+0x10/0x10
__se_sys_ioctl+0xfb/0x170
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
When 'ioctl(OCFS2_IOC_GROUP_ADD, ...)' has failed for the particular
inode in 'ocfs2_verify_group_and_input()', corresponding buffer head
remains cached and subsequent call to the same 'ioctl()' for the same
inode issues the BUG() in 'ocfs2_set_new_buffer_uptodate()' (trying
to cache the same buffer head of that inode). Fix this by uncaching
the buffer head with 'ocfs2_remove_from_cache()' on error path in
'ocfs2_group_add()'.
Link: https://lkml.kernel.org/r/20241114043844.111847-1-dmantipov@yandex.ru
Fixes: 7909f2bf83 ("[PATCH 2/2] ocfs2: Implement group add for online resize")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+453873f1588c2d75b447@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=453873f1588c2d75b447
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Dmitry Antipov <dmantipov@yandex.ru>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
