mirror of
https://github.com/hardkernel/linux.git
synced 2026-06-07 03:15:31 +09:00
c299188b443ac5b4dc5a8da0574881eb14bb63cf
1229051 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Christoph Hellwig
|
c299188b44 |
xfs: remove a racy if_bytes check in xfs_reflink_end_cow_extent
commit 86de848403abda05bf9c16dcdb6bef65a8d88c41 upstream. Accessing if_bytes without the ilock is racy. Remove the initial if_bytes == 0 check in xfs_reflink_end_cow_extent and let ext_iext_lookup_extent fail for this case after we've taken the ilock. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Christoph Hellwig
|
4bcef72d96 |
xfs: fix xfs_bmap_add_extent_delay_real for partial conversions
commit d69bee6a35d3c5e4873b9e164dd1a9711351a97c upstream. [backport: resolve conflict due to xfs_mod_freecounter refactor] xfs_bmap_add_extent_delay_real takes parts or all of a delalloc extent and converts them to a real extent. It is written to deal with any potential overlap of the to be converted range with the delalloc extent, but it turns out that currently only converting the entire extents, or a part starting at the beginning is actually exercised, as the only caller always tries to convert the entire delalloc extent, and either succeeds or at least progresses partially from the start. If it only converts a tiny part of a delalloc extent, the indirect block calculation for the new delalloc extent (da_new) might be equivalent to that of the existing delalloc extent (da_old). If this extent conversion now requires allocating an indirect block that gets accounted into da_new, leading to the assert that da_new must be smaller or equal to da_new unless we split the extent to trigger. Except for the assert that case is actually handled by just trying to allocate more space, as that already handled for the split case (which currently can't be reached at all), so just reusing it should be fine. Except that without dipping into the reserved block pool that would make it a bit too easy to trigger a fs shutdown due to ENOSPC. So in addition to adjusting the assert, also dip into the reserved block pool. Note that I could only reproduce the assert with a change to only convert the actually asked range instead of the full delalloc extent from xfs_bmapi_write. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Christoph Hellwig
|
f43bd357fd |
xfs: fix error returns from xfs_bmapi_write
commit 6773da870ab89123d1b513da63ed59e32a29cb77 upstream.
[backport: resolve conflicts due to missing quota_repair.c,
rtbitmap_repair.c, xfs_bmap_mark_sick()]
xfs_bmapi_write can return 0 without actually returning a mapping in
mval in two different cases:
1) when there is absolutely no space available to do an allocation
2) when converting delalloc space, and the allocation is so small
that it only covers parts of the delalloc extent before the
range requested by the caller
Callers at best can handle one of these cases, but in many cases can't
cope with either one. Switch xfs_bmapi_write to always return a
mapping or return an error code instead. For case 1) above ENOSPC is
the obvious choice which is very much what the callers expect anyway.
For case 2) there is no really good error code, so pick a funky one
from the SysV streams portfolio.
This fixes the reproducer here:
https://lore.kernel.org/linux-xfs/CAEJPjCvT3Uag-pMTYuigEjWZHn1sGMZ0GCjVVCv29tNHK76Cgg@mail.gmail.com0/
which uses reserved blocks to create file systems that are gravely
out of space and thus cause at least xfs_file_alloc_space to hang
and trigger the lack of ENOSPC handling in xfs_dquot_disk_alloc.
Note that this patch does not actually make any caller but
xfs_alloc_file_space deal intelligently with case 2) above.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: 刘通 <lyutoon@gmail.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Liu Shixin
|
bed2b90378 |
mm/swapfile: skip HugeTLB pages for unuse_vma
commit 7528c4fb1237512ee18049f852f014eba80bbe8d upstream.
I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The
problem can be reproduced by the following steps:
1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
2. Swapout the above anonymous memory.
3. run swapoff and we will get a bad pud error in kernel message:
mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7)
We can tell that pud_clear_bad is called by pud_none_or_clear_bad in
unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never
be freed because we lost it from page table. We can skip HugeTLB pages
for unuse_vma to fix it.
Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com
Fixes:
|
||
|
Wei Xu
|
a0035fc555 |
mm/mglru: only clear kswapd_failures if reclaimable
commit b130ba4a6259f6b64d8af15e9e7ab1e912bcb7ad upstream.
lru_gen_shrink_node() unconditionally clears kswapd_failures, which can
prevent kswapd from sleeping and cause 100% kswapd cpu usage even when
kswapd repeatedly fails to make progress in reclaim.
Only clear kswap_failures in lru_gen_shrink_node() if reclaim makes some
progress, similar to shrink_node().
I happened to run into this problem in one of my tests recently. It
requires a combination of several conditions: The allocator needs to
allocate a right amount of pages such that it can wake up kswapd
without itself being OOM killed; there is no memory for kswapd to
reclaim (My test disables swap and cleans page cache first); no other
process frees enough memory at the same time.
Link: https://lkml.kernel.org/r/20241014221211.832591-1-weixugc@google.com
Fixes:
|
||
|
Jann Horn
|
17396e32f9 |
mm/mremap: fix move_normal_pmd/retract_page_tables race
commit 6fa1066fc5d00cb9f1b0e83b7ff6ef98d26ba2aa upstream.
In mremap(), move_page_tables() looks at the type of the PMD entry and the
specified address range to figure out by which method the next chunk of
page table entries should be moved.
At that point, the mmap_lock is held in write mode, but no rmap locks are
held yet. For PMD entries that point to page tables and are fully covered
by the source address range, move_pgt_entry(NORMAL_PMD, ...) is called,
which first takes rmap locks, then does move_normal_pmd().
move_normal_pmd() takes the necessary page table locks at source and
destination, then moves an entire page table from the source to the
destination.
The problem is: The rmap locks, which protect against concurrent page
table removal by retract_page_tables() in the THP code, are only taken
after the PMD entry has been read and it has been decided how to move it.
So we can race as follows (with two processes that have mappings of the
same tmpfs file that is stored on a tmpfs mount with huge=advise); note
that process A accesses page tables through the MM while process B does it
through the file rmap:
process A process B
========= =========
mremap
mremap_to
move_vma
move_page_tables
get_old_pmd
alloc_new_pmd
*** PREEMPT ***
madvise(MADV_COLLAPSE)
do_madvise
madvise_walk_vmas
madvise_vma_behavior
madvise_collapse
hpage_collapse_scan_file
collapse_file
retract_page_tables
i_mmap_lock_read(mapping)
pmdp_collapse_flush
i_mmap_unlock_read(mapping)
move_pgt_entry(NORMAL_PMD, ...)
take_rmap_locks
move_normal_pmd
drop_rmap_locks
When this happens, move_normal_pmd() can end up creating bogus PMD entries
in the line `pmd_populate(mm, new_pmd, pmd_pgtable(pmd))`. The effect
depends on arch-specific and machine-specific details; on x86, you can end
up with physical page 0 mapped as a page table, which is likely
exploitable for user->kernel privilege escalation.
Fix the race by letting process B recheck that the PMD still points to a
page table after the rmap locks have been taken. Otherwise, we bail and
let the caller fall back to the PTE-level copying path, which will then
bail immediately at the pmd_none() check.
Bug reachability: Reaching this bug requires that you can create
shmem/file THP mappings - anonymous THP uses different code that doesn't
zap stuff under rmap locks. File THP is gated on an experimental config
flag (CONFIG_READ_ONLY_THP_FOR_FS), so on normal distro kernels you need
shmem THP to hit this bug. As far as I know, getting shmem THP normally
requires that you can mount your own tmpfs with the right mount flags,
which would require creating your own user+mount namespace; though I don't
know if some distros maybe enable shmem THP by default or something like
that.
Bug impact: This issue can likely be used for user->kernel privilege
escalation when it is reachable.
Link: https://lkml.kernel.org/r/20241007-move_normal_pmd-vs-collapse-fix-2-v1-1-5ead9631f2ea@google.com
Fixes:
|
||
|
Edward Liaw
|
6b91fd65a1 |
selftests/mm: fix deadlock for fork after pthread_create on ARM
commit e142cc87ac4ec618f2ccf5f68aedcd6e28a59d9d upstream.
On Android with arm, there is some synchronization needed to avoid a
deadlock when forking after pthread_create.
Link: https://lkml.kernel.org/r/20241003211716.371786-3-edliaw@google.com
Fixes:
|
||
|
Edward Liaw
|
8f5fa1c677 |
selftests/mm: replace atomic_bool with pthread_barrier_t
commit e61ef21e27e8deed8c474e9f47f4aa7bc37e138c upstream.
Patch series "selftests/mm: fix deadlock after pthread_create".
On Android arm, pthread_create followed by a fork caused a deadlock in the
case where the fork required work to be completed by the created thread.
Update the synchronization primitive to use pthread_barrier instead of
atomic_bool.
Apply the same fix to the wp-fork-with-event test.
This patch (of 2):
Swap synchronization primitive with pthread_barrier, so that stdatomic.h
does not need to be included.
The synchronization is needed on Android ARM64; we see a deadlock with
pthread_create when the parent thread races forward before the child has a
chance to start doing work.
Link: https://lkml.kernel.org/r/20241003211716.371786-1-edliaw@google.com
Link: https://lkml.kernel.org/r/20241003211716.371786-2-edliaw@google.com
Fixes:
|
||
|
OGAWA Hirofumi
|
a9af9d5fb0 |
fat: fix uninitialized variable
commit 963a7f4d3b90ee195b895ca06b95757fcba02d1a upstream. syszbot produced this with a corrupted fs image. In theory, however an IO error would trigger this also. This affects just an error report, so should not be a serious error. Link: https://lkml.kernel.org/r/87r08wjsnh.fsf@mail.parknet.co.jp Link: https://lkml.kernel.org/r/66ff2c95.050a0220.49194.03e9.GAE@google.com Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by: syzbot+ef0d7bc412553291aa86@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Nianyao Tang
|
8e29f32351 |
irqchip/gic-v3-its: Fix VSYNC referencing an unmapped VPE on GIC v4.1
commit 80e9963fb3b5509dfcabe9652d56bf4b35542055 upstream.
As per the GICv4.1 spec (Arm IHI 0069H, 5.3.19):
"A VMAPP with {V, Alloc}=={0, x} is self-synchronizing, This means the ITS
command queue does not show the command as consumed until all of its
effects are completed."
Furthermore, VSYNC is allowed to deliver an SError when referencing a
non existent VPE.
By these definitions, a VMAPP followed by a VSYNC is a bug, as the
later references a VPE that has been unmapped by the former.
Fix it by eliding the VSYNC in this scenario.
Fixes:
|
||
|
Jinjie Ruan
|
20b5342de5 |
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
commit 217a3d98d1e9891a8b1438a27dfbc64ddf01f691 upstream.
Commit a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in
kunit test") fixed the use-after-free error, but introduced below
memory leaks by removing necessary vcap_free_rule(), add it to fix it.
unreferenced object 0xffffff80ca58b700 (size 192):
comm "kunit_try_catch", pid 1215, jiffies 4294898264
hex dump (first 32 bytes):
00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d...
00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................
backtrace (crc 9c09c3fe):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4
[<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0400 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898265
hex dump (first 32 bytes):
80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X.....
39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9...............
backtrace (crc daf014e9):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528
[<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0700 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898265
hex dump (first 32 bytes):
80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X.....
3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../......
backtrace (crc 8d877792):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c
[<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0900 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898266
hex dump (first 32 bytes):
80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................
7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }...............
backtrace (crc 34181e56):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528
[<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8
[<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0980 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898266
hex dump (first 32 bytes):
18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X.............
67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t.....
backtrace (crc 275fd9be):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528
[<000000001396a1a2>] test_add_def_fields+0xb0/0x100
[<000000006e7621f0>] vcap_val_rule+0xa98/0x13e8
[<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
......
Cc: stable@vger.kernel.org
Fixes: a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in kunit test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20241014121922.1280583-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Oleksij Rempel
|
81db1e5284 |
net: macb: Avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY
commit d0c3601f2c4e12e7689b0f46ebc17525250ea8c3 upstream. A boot delay was introduced by commit |
||
|
Mark Rutland
|
8165bf83b8 |
arm64: probes: Fix uprobes for big-endian kernels
commit 13f8f1e05f1dc36dbba6cba0ae03354c0dafcde7 upstream.
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.
At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.
Tested with the following:
| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
| void *addr;
|
| asm volatile(
| " adrp %x0, adrp_self\n"
| " add %x0, %x0, :lo12:adrp_self\n"
| : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
| void *ptr = adrp_self();
| bool equal = (ptr == adrp_self);
|
| printf("adrp_self => %p\n"
| "adrp_self() => %p\n"
| "%s\n",
| adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
| return 0;
| }
.... where the adrp_self() function was compiled to:
| 00000000004007e0 <adrp_self>:
| 4007e0: 90000000 adrp x0, 400000 <__ehdr_start>
| 4007e4: 911f8000 add x0, x0, #0x7e0
| 4007e8: d65f03c0 ret
Before this patch, the ADRP is not recognized, and is assumed to be
steppable, resulting in corruption of the result:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL
After this patch, the ADRP is correctly recognized and simulated:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
Fixes:
|
||
|
Mark Rutland
|
173c13e387 |
arm64: probes: Fix simulate_ldr*_literal()
commit 50f813e57601c22b6f26ced3193b9b94d70a2640 upstream.
The simulate_ldr_literal() code always loads a 64-bit quantity, and when
simulating a 32-bit load into a 'W' register, it discards the most
significant 32 bits. For big-endian kernels this means that the relevant
bits are discarded, and the value returned is the the subsequent 32 bits
in memory (i.e. the value at addr + 4).
Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a
plain C load, which the compiler may tear or elide (e.g. if the target
is the zero register). Today this doesn't happen to matter, but it may
matter in future if trampoline code uses a LDR (literal) or LDRSW
(literal).
Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an
appropriately-sized READ_ONCE() to perform the access, which avoids
these problems.
Fixes:
|
||
|
Mark Rutland
|
9f1e773547 |
arm64: probes: Remove broken LDR (literal) uprobe support
commit acc450aa07099d071b18174c22a1119c57da8227 upstream.
The simulate_ldr_literal() and simulate_ldrsw_literal() functions are
unsafe to use for uprobes. Both functions were originally written for
use with kprobes, and access memory with plain C accesses. When uprobes
was added, these were reused unmodified even though they cannot safely
access user memory.
There are three key problems:
1) The plain C accesses do not have corresponding extable entries, and
thus if they encounter a fault the kernel will treat these as
unintentional accesses to user memory, resulting in a BUG() which
will kill the kernel thread, and likely lead to further issues (e.g.
lockup or panic()).
2) The plain C accesses are subject to HW PAN and SW PAN, and so when
either is in use, any attempt to simulate an access to user memory
will fault. Thus neither simulate_ldr_literal() nor
simulate_ldrsw_literal() can do anything useful when simulating a
user instruction on any system with HW PAN or SW PAN.
3) The plain C accesses are privileged, as they run in kernel context,
and in practice can access a small range of kernel virtual addresses.
The instructions they simulate have a range of +/-1MiB, and since the
simulated instructions must itself be a user instructions in the
TTBR0 address range, these can address the final 1MiB of the TTBR1
acddress range by wrapping downwards from an address in the first
1MiB of the TTBR0 address range.
In contemporary kernels the last 8MiB of TTBR1 address range is
reserved, and accesses to this will always fault, meaning this is no
worse than (1).
Historically, it was theoretically possible for the linear map or
vmemmap to spill into the final 8MiB of the TTBR1 address range, but
in practice this is extremely unlikely to occur as this would
require either:
* Having enough physical memory to fill the entire linear map all the
way to the final 1MiB of the TTBR1 address range.
* Getting unlucky with KASLR randomization of the linear map such
that the populated region happens to overlap with the last 1MiB of
the TTBR address range.
... and in either case if we were to spill into the final page there
would be larger problems as the final page would alias with error
pointers.
Practically speaking, (1) and (2) are the big issues. Given there have
been no reports of problems since the broken code was introduced, it
appears that no-one is relying on probing these instructions with
uprobes.
Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW
(literal), limiting the use of simulate_ldr_literal() and
simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR
(literal) and LDRSW (literal) will be rejected as
arm_probe_decode_insn() will return INSN_REJECTED. In future we can
consider introducing working uprobes support for these instructions, but
this will require more significant work.
Fixes:
|
||
|
Jinjie Ruan
|
a3f169e398 |
posix-clock: Fix missing timespec64 check in pc_clock_settime()
commit d8794ac20a299b647ba9958f6d657051fc51a540 upstream.
As Andrew pointed out, it will make sense that the PTP core
checked timespec64 struct's tv_sec and tv_nsec range before calling
ptp->info->settime64().
As the man manual of clock_settime() said, if tp.tv_sec is negative or
tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL,
which include dynamic clocks which handles PTP clock, and the condition is
consistent with timespec64_valid(). As Thomas suggested, timespec64_valid()
only check the timespec is valid, but not ensure that the time is
in a valid range, so check it ahead using timespec64_valid_strict()
in pc_clock_settime() and return -EINVAL if not valid.
There are some drivers that use tp->tv_sec and tp->tv_nsec directly to
write registers without validity checks and assume that the higher layer
has checked it, which is dangerous and will benefit from this, such as
hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(),
and some drivers can remove the checks of itself.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Wei Fang
|
75150ba93d |
net: enetc: add missing static descriptor and inline keyword
commit 1d7b2ce43d2c22a21dadaf689cb36a69570346a6 upstream.
Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled.
The detailed warnings are shown as follows.
include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes]
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs)
| ^
| static
8 warnings generated.
Fixes:
|
||
|
Wei Fang
|
760a7c9695 |
net: enetc: disable NAPI after all rings are disabled
commit 6b58fadd44aafbbd6af5f0b965063e1fd2063992 upstream.
When running "xdp-bench tx eno0" to test the XDP_TX feature of ENETC
on LS1028A, it was found that if the command was re-run multiple times,
Rx could not receive the frames, and the result of xdp-bench showed
that the rx rate was 0.
root@ls1028ardb:~# ./xdp-bench tx eno0
Hairpinning (XDP_TX) packets on eno0 (ifindex 3; driver fsl_enetc)
Summary 2046 rx/s 0 err,drop/s
Summary 0 rx/s 0 err,drop/s
Summary 0 rx/s 0 err,drop/s
Summary 0 rx/s 0 err,drop/s
By observing the Rx PIR and CIR registers, CIR is always 0x7FF and
PIR is always 0x7FE, which means that the Rx ring is full and can no
longer accommodate other Rx frames. Therefore, the problem is caused
by the Rx BD ring not being cleaned up.
Further analysis of the code revealed that the Rx BD ring will only
be cleaned if the "cleaned_cnt > xdp_tx_in_flight" condition is met.
Therefore, some debug logs were added to the driver and the current
values of cleaned_cnt and xdp_tx_in_flight were printed when the Rx
BD ring was full. The logs are as follows.
[ 178.762419] [XDP TX] >> cleaned_cnt:1728, xdp_tx_in_flight:2140
[ 178.771387] [XDP TX] >> cleaned_cnt:1941, xdp_tx_in_flight:2110
[ 178.776058] [XDP TX] >> cleaned_cnt:1792, xdp_tx_in_flight:2110
From the results, the max value of xdp_tx_in_flight has reached 2140.
However, the size of the Rx BD ring is only 2048. So xdp_tx_in_flight
did not drop to 0 after enetc_stop() is called and the driver does not
clear it. The root cause is that NAPI is disabled too aggressively,
without having waited for the pending XDP_TX frames to be transmitted,
and their buffers recycled, so that xdp_tx_in_flight cannot naturally
drop to 0. Later, enetc_free_tx_ring() does free those stale, unsent
XDP_TX packets, but it is not coded up to also reset xdp_tx_in_flight,
hence the manifestation of the bug.
One option would be to cover this extra condition in enetc_free_tx_ring(),
but now that the ENETC_TX_DOWN exists, we have created a window at
the beginning of enetc_stop() where NAPI can still be scheduled, but
any concurrent enqueue will be blocked. Therefore, enetc_wait_bdrs()
and enetc_disable_tx_bdrs() can be called with NAPI still scheduled,
and it is guaranteed that this will not wait indefinitely, but instead
give us an indication that the pending TX frames have orderly dropped
to zero. Only then should we call napi_disable().
This way, enetc_free_tx_ring() becomes entirely redundant and can be
dropped as part of subsequent cleanup.
The change also refactors enetc_start() so that it looks like the
mirror opposite procedure of enetc_stop().
Fixes:
|
||
|
Wei Fang
|
a419f478b9 |
net: enetc: disable Tx BD rings after they are empty
commit 0a93f2ca4be6c4616d371f18a3fabad2df7f8d55 upstream.
The Tx BD rings are disabled first in enetc_stop() and the driver
waits for them to become empty. This operation is not safe while
the ring is actively transmitting frames, and will cause the ring
to not be empty and hardware exception. As described in the NETC
block guide, software should only disable an active Tx ring after
all pending ring entries have been consumed (i.e. when PI = CI).
Disabling a transmit ring that is actively processing BDs risks
a HW-SW race hazard whereby a hardware resource becomes assigned
to work on one or more ring entries only to have those entries be
removed due to the ring becoming disabled.
When testing XDP_REDIRECT feautre, although all frames were blocked
from being put into Tx rings during ring reconfiguration, the similar
warning log was still encountered:
fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear
fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear
The reason is that when there are still unsent frames in the Tx ring,
disabling the Tx ring causes the remaining frames to be unable to be
sent out. And the Tx ring cannot be restored, which means that even
if the xdp program is uninstalled, the Tx frames cannot be sent out
anymore. Therefore, correct the operation order in enect_start() and
enect_stop().
Fixes:
|
||
|
Wei Fang
|
3718434946 |
net: enetc: block concurrent XDP transmissions during ring reconfiguration
commit c728a95ccf2a8ba544facfc30a4418d4c68c39f0 upstream.
When testing the XDP_REDIRECT function on the LS1028A platform, we
found a very reproducible issue that the Tx frames can no longer be
sent out even if XDP_REDIRECT is turned off. Specifically, if there
is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on,
the console may display some warnings like "timeout for tx ring #6
clear", and all redirected frames will be dropped, the detailed log
is as follows.
root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2
Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc)
[203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear
[204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear
[204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear
eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s
xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg
eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s
xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg
By analyzing the XDP_REDIRECT implementation of enetc driver, the
driver will reconfigure Tx and Rx BD rings when a bpf program is
installed or uninstalled, but there is no mechanisms to block the
redirected frames when enetc driver reconfigures rings. Similarly,
XDP_TX verdicts on received frames can also lead to frames being
enqueued in the Tx rings. Because XDP ignores the state set by the
netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to
suppress transmission of XDP frames.
Fixes:
|
||
|
Wei Fang
|
1c95443e44 |
net: enetc: remove xdp_drops statistic from enetc_xdp_drop()
commit 412950d5746f7aa139e14fe95338694c1f09b595 upstream.
The xdp_drops statistic indicates the number of XDP frames dropped in
the Rx direction. However, enetc_xdp_drop() is also used in XDP_TX and
XDP_REDIRECT actions. If frame loss occurs in these two actions, the
frames loss count should not be included in xdp_drops, because there
are already xdp_tx_drops and xdp_redirect_failures to count the frame
loss of these two actions, so it's better to remove xdp_drops statistic
from enetc_xdp_drop() and increase xdp_drops in XDP_DROP action.
Fixes:
|
||
|
Matthieu Baerts (NGI0)
|
7b2e478aba |
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
commit 7decd1f5904a489d3ccdcf131972f94645681689 upstream. Syzkaller reported this splat: ================================================================== BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662 CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7fe4579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 5387: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803 subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956 __tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline] tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167 mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764 __mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592 mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642 mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline] mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943 mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777 process_one_work+0x958/0x1b30 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 113: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:2342 [inline] slab_free mm/slub.c:4579 [inline] kfree+0x14f/0x4b0 mm/slub.c:4727 kvfree+0x47/0x50 mm/util.c:701 kvfree_rcu_list+0xf5/0x2c0 kernel/rcu/tree.c:3423 kvfree_rcu_drain_ready kernel/rcu/tree.c:3563 [inline] kfree_rcu_monitor+0x503/0x8b0 kernel/rcu/tree.c:3632 kfree_rcu_shrink_scan+0x245/0x3a0 kernel/rcu/tree.c:3966 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab+0x32b/0x12a0 mm/shrinker.c:662 shrink_one+0x47e/0x7b0 mm/vmscan.c:4818 shrink_many mm/vmscan.c:4879 [inline] lru_gen_shrink_node mm/vmscan.c:4957 [inline] shrink_node+0x2452/0x39d0 mm/vmscan.c:5937 kswapd_shrink_node mm/vmscan.c:6765 [inline] balance_pgdat+0xc19/0x18f0 mm/vmscan.c:6957 kswapd+0x5ea/0xbf0 mm/vmscan.c:7226 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Last potentially related work creation: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xba/0xd0 mm/kasan/generic.c:541 kvfree_call_rcu+0x74/0xbe0 kernel/rcu/tree.c:3810 subflow_ulp_release+0x2ae/0x350 net/mptcp/subflow.c:2009 tcp_cleanup_ulp+0x7c/0x130 net/ipv4/tcp_ulp.c:124 tcp_v4_destroy_sock+0x1c5/0x6a0 net/ipv4/tcp_ipv4.c:2541 inet_csk_destroy_sock+0x1a3/0x440 net/ipv4/inet_connection_sock.c:1293 tcp_done+0x252/0x350 net/ipv4/tcp.c:4870 tcp_rcv_state_process+0x379b/0x4f30 net/ipv4/tcp_input.c:6933 tcp_v4_do_rcv+0x1ad/0xa90 net/ipv4/tcp_ipv4.c:1938 sk_backlog_rcv include/net/sock.h:1115 [inline] __release_sock+0x31b/0x400 net/core/sock.c:3072 __tcp_close+0x4f3/0xff0 net/ipv4/tcp.c:3142 __mptcp_close_ssk+0x331/0x14d0 net/mptcp/protocol.c:2489 mptcp_close_ssk net/mptcp/protocol.c:2543 [inline] mptcp_close_ssk+0x150/0x220 net/mptcp/protocol.c:2526 mptcp_pm_nl_rm_addr_or_subflow+0x2be/0xcc0 net/mptcp/pm_netlink.c:878 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e The buggy address belongs to the object at ffff8880569ac800 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 88 bytes inside of freed 512-byte region [ffff8880569ac800, ffff8880569aca00) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x569ac head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x4fff00000000040(head|node=1|zone=1|lastcpupid=0x7ff) page_type: f5(slab) raw: 04fff00000000040 ffff88801ac42c80 dead000000000100 dead000000000122 raw: 0000000000000000 0000000080100010 00000001f5000000 0000000000000000 head: 04fff00000000040 ffff88801ac42c80 dead000000000100 dead000000000122 head: 0000000000000000 0000000080100010 00000001f5000000 0000000000000000 head: 04fff00000000002 ffffea00015a6b01 ffffffffffffffff 0000000000000000 head: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 10238, tgid 10238 (kworker/u32:6), ts 597403252405, free_ts 597177952947 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x2d1/0x350 mm/page_alloc.c:1537 prep_new_page mm/page_alloc.c:1545 [inline] get_page_from_freelist+0x101e/0x3070 mm/page_alloc.c:3457 __alloc_pages_noprof+0x223/0x25a0 mm/page_alloc.c:4733 alloc_pages_mpol_noprof+0x2c9/0x610 mm/mempolicy.c:2265 alloc_slab_page mm/slub.c:2412 [inline] allocate_slab mm/slub.c:2578 [inline] new_slab+0x2ba/0x3f0 mm/slub.c:2631 ___slab_alloc+0xd1d/0x16f0 mm/slub.c:3818 __slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908 __slab_alloc_node mm/slub.c:3961 [inline] slab_alloc_node mm/slub.c:4122 [inline] __kmalloc_cache_noprof+0x2c5/0x310 mm/slub.c:4290 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] mld_add_delrec net/ipv6/mcast.c:743 [inline] igmp6_leave_group net/ipv6/mcast.c:2625 [inline] igmp6_group_dropped+0x4ab/0xe40 net/ipv6/mcast.c:723 __ipv6_dev_mc_dec+0x281/0x360 net/ipv6/mcast.c:979 addrconf_leave_solict net/ipv6/addrconf.c:2253 [inline] __ipv6_ifa_notify+0x3f6/0xc30 net/ipv6/addrconf.c:6283 addrconf_ifdown.isra.0+0xef9/0x1a20 net/ipv6/addrconf.c:3982 addrconf_notify+0x220/0x19c0 net/ipv6/addrconf.c:3781 notifier_call_chain+0xb9/0x410 kernel/notifier.c:93 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1996 call_netdevice_notifiers_extack net/core/dev.c:2034 [inline] call_netdevice_notifiers net/core/dev.c:2048 [inline] dev_close_many+0x333/0x6a0 net/core/dev.c:1589 page last free pid 13136 tgid 13136 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1108 [inline] free_unref_page+0x5f4/0xdc0 mm/page_alloc.c:2638 stack_depot_save_flags+0x2da/0x900 lib/stackdepot.c:666 kasan_save_stack+0x42/0x60 mm/kasan/common.c:48 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x89/0x90 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4085 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_noprof+0x121/0x2f0 mm/slub.c:4141 skb_clone+0x190/0x3f0 net/core/skbuff.c:2084 do_one_broadcast net/netlink/af_netlink.c:1462 [inline] netlink_broadcast_filtered+0xb11/0xef0 net/netlink/af_netlink.c:1540 netlink_broadcast+0x39/0x50 net/netlink/af_netlink.c:1564 uevent_net_broadcast_untagged lib/kobject_uevent.c:331 [inline] kobject_uevent_net_broadcast lib/kobject_uevent.c:410 [inline] kobject_uevent_env+0xacd/0x1670 lib/kobject_uevent.c:608 device_del+0x623/0x9f0 drivers/base/core.c:3882 snd_card_disconnect.part.0+0x58a/0x7c0 sound/core/init.c:546 snd_card_disconnect+0x1f/0x30 sound/core/init.c:495 snd_usx2y_disconnect+0xe9/0x1f0 sound/usb/usx2y/usbusx2y.c:417 usb_unbind_interface+0x1e8/0x970 drivers/usb/core/driver.c:461 device_remove drivers/base/dd.c:569 [inline] device_remove+0x122/0x170 drivers/base/dd.c:561 That's because 'subflow' is used just after 'mptcp_close_ssk(subflow)', which will initiate the release of its memory. Even if it is very likely the release and the re-utilisation will be done later on, it is of course better to avoid any issues and read the content of 'subflow' before closing it. Fixes: 1c1f72137598 ("mptcp: pm: only decrement add_addr_accepted for MPJ req") Cc: stable@vger.kernel.org Reported-by: syzbot+3c8b7a8e7df6a2a226ca@syzkaller.appspotmail.com Closes: https://lore.kernel.org/670d7337.050a0220.4cbc0.004f.GAE@google.com Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/20241015-net-mptcp-uaf-pm-rm-v1-1-c4ee5d987a64@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Vasiliy Kovalev
|
3c088dba8a |
ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2
commit 9988844c457f6f17fb2e75aa000b6c3b1b673bb9 upstream. There is a problem with simultaneous audio output to headphones and speakers, and when headphones are turned off, the speakers also turn off and do not turn them on. However, it was found that if you boot linux immediately after windows, there are no such problems. When comparing alsa-info, the only difference is the different configuration of Node 0x1d: working conf. (windows): Pin-ctls: 0x80: HP not working (linux): Pin-ctls: 0xc0: OUT HP This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the described problem. Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20241009134248.662175-1-kovalev@altlinux.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Namjae Jeon
|
5511999e96 |
ksmbd: fix user-after-free from session log off
commit 7aa8804c0b67b3cb263a472d17f2cb50d7f1a930 upstream. There is racy issue between smb2 session log off and smb2 session setup. It will cause user-after-free from session log off. This add session_lock when setting SMB2_SESSION_EXPIRED and referece count to session struct not to free session while it is being used. Cc: stable@vger.kernel.org # v5.15+ Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25282 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Roi Martin
|
7fc7c47b9b |
btrfs: fix uninitialized pointer free on read_alloc_one_name() error
commit 2ab5e243c2266c841e0f6904fad1514b18eaf510 upstream. The function read_alloc_one_name() does not initialize the name field of the passed fscrypt_str struct if kmalloc fails to allocate the corresponding buffer. Thus, it is not guaranteed that fscrypt_str.name is initialized when freeing it. This is a follow-up to the linked patch that fixes the remaining instances of the bug introduced by commit |
||
|
Roi Martin
|
e11ce03b58 |
btrfs: fix uninitialized pointer free in add_inode_ref()
commit 66691c6e2f18d2aa4b22ffb624b9bdc97e9979e4 upstream.
The add_inode_ref() function does not initialize the "name" struct when
it is declared. If any of the following calls to "read_one_inode()
returns NULL,
dir = read_one_inode(root, parent_objectid);
if (!dir) {
ret = -ENOENT;
goto out;
}
inode = read_one_inode(root, inode_objectid);
if (!inode) {
ret = -EIO;
goto out;
}
then "name.name" would be freed on "out" before being initialized.
out:
...
kfree(name.name);
This issue was reported by Coverity with CID 1526744.
Fixes:
|
||
|
Greg Kroah-Hartman
|
e9448e371c |
Linux 6.6.57
Link: https://lore.kernel.org/r/20241014141042.954319779@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20241015112327.341300635@linuxfoundation.org Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Kexy Biscuit <kexybiscuit@aosc.io> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Johan Hovold
|
8d5aebfff8 |
scsi: Revert "scsi: sd: Do not repeat the starting disk message"
commit da3e19ef0b3de0aa4b25595bdc214c02a04f19b8 upstream.
This reverts commit 7a6bbc2829d4ab592c7e440a6f6f5deb3cd95db4.
The offending commit tried to suppress a double "Starting disk" message for
some drivers, but instead started spamming the log with bogus messages
every five seconds:
[ 311.798956] sd 0:0:0:0: [sda] Starting disk
[ 316.919103] sd 0:0:0:0: [sda] Starting disk
[ 322.040775] sd 0:0:0:0: [sda] Starting disk
[ 327.161140] sd 0:0:0:0: [sda] Starting disk
[ 332.281352] sd 0:0:0:0: [sda] Starting disk
[ 337.401878] sd 0:0:0:0: [sda] Starting disk
[ 342.521527] sd 0:0:0:0: [sda] Starting disk
[ 345.850401] sd 0:0:0:0: [sda] Starting disk
[ 350.967132] sd 0:0:0:0: [sda] Starting disk
[ 356.090454] sd 0:0:0:0: [sda] Starting disk
...
on machines that do not actually stop the disk on runtime suspend (e.g.
the Qualcomm sc8280xp CRD with UFS).
Let's just revert for now to address the regression.
Fixes: 7a6bbc2829d4 ("scsi: sd: Do not repeat the starting disk message")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240716161101.30692-1-johan+linaro@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Vitaly Lifshits
|
e6fc67c0ef |
e1000e: fix force smbus during suspend flow
commit 76a0a3f9cc2fbd0e56671706bb74a9a988397898 upstream.
Commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function
to avoid PHY loss issue") resolved a PHY access loss during suspend on
Meteor Lake consumer platforms, but it affected corporate systems
incorrectly.
A better fix, working for both consumer and corporate systems, was
proposed in commit bfd546a552e1 ("e1000e: move force SMBUS near the end
of enable_ulp function"). However, it introduced a regression on older
devices, such as [8086:15B8], [8086:15F9], [8086:15BE].
This patch aims to fix the secondary regression, by limiting the scope of
the changes to Meteor Lake platforms only.
Fixes: bfd546a552e1 ("e1000e: move force SMBUS near the end of enable_ulp function")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218940
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218936
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240709203123.2103296-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Linus Walleij
|
611f74b0e7 |
net: ethernet: cortina: Restore TSO support
commit 2942dfab630444d46aaa37fb7d629b620abbf6ba upstream.
An earlier commit deleted the TSO support in the Cortina Gemini
driver because the driver was confusing gso_size and MTU,
probably because what the Linux kernel calls "gso_size" was
called "MTU" in the datasheet.
Restore the functionality properly reading the gso_size from
the skbuff.
Tested with iperf3, running a server on a different machine
and client on the device with the cortina gemini ethernet:
Connecting to host 192.168.1.2, port 5201
60008000.ethernet-port eth0: segment offloading mss = 05ea len=1c8a
60008000.ethernet-port eth0: segment offloading mss = 05ea len=1c8a
60008000.ethernet-port eth0: segment offloading mss = 05ea len=27da
60008000.ethernet-port eth0: segment offloading mss = 05ea len=0b92
60008000.ethernet-port eth0: segment offloading mss = 05ea len=2bda
(...)
(The hardware MSS 0x05ea here includes the ethernet headers.)
If I disable all segment offloading on the receiving host and
dump packets using tcpdump -xx like this:
ethtool -K enp2s0 gro off gso off tso off
tcpdump -xx -i enp2s0 host 192.168.1.136
I get segmented packages such as this when running iperf3:
23:16:54.024139 IP OpenWrt.lan.59168 > Fecusia.targus-getdata1:
Flags [.], seq 1486:2934, ack 1, win 4198,
options [nop,nop,TS val 3886192908 ecr 3601341877], length 1448
0x0000: fc34 9701 a0c6 14d6 4da8 3c4f 0800 4500
0x0010: 05dc 16a0 4000 4006 9aa1 c0a8 0188 c0a8
0x0020: 0102 e720 1451 ff25 9822 4c52 29cf 8010
0x0030: 1066 ac8c 0000 0101 080a e7a2 990c d6a8
(...)
0x05c0: 5e49 e109 fe8c 4617 5e18 7a82 7eae d647
0x05d0: e8ee ae64 dc88 c897 3f8a 07a4 3a33 6b1b
0x05e0: 3501 a30f 2758 cc44 4b4a
Several such packets often follow after each other verifying
the segmentation into 0x05a8 (1448) byte packages also on the
reveiving end. As can be seen, the ethernet frames are
0x05ea (1514) in size.
Performance with iperf3 before this patch: ~15.5 Mbit/s
Performance with iperf3 after this patch: ~175 Mbit/s
This was running a 60 second test (twice) the best measurement
was 179 Mbit/s.
For comparison if I run iperf3 with UDP I get around 1.05 Mbit/s
both before and after this patch.
While this is a gigabit ethernet interface, the CPU is a cheap
D-Link DIR-685 router (based on the ARMv5 Faraday FA526 at
~50 MHz), and the software is not supposed to drive traffic,
as the device has a DSA chip, so this kind of numbers can be
expected.
Fixes: ac631873c9e7 ("net: ethernet: cortina: Drop TSO support")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Patrick Roy
|
7caf966390 |
secretmem: disable memfd_secret() if arch cannot set direct map
commit 532b53cebe58f34ce1c0f34d866f5c0e335c53c6 upstream.
Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This
is the case for example on some arm64 configurations, where marking 4k
PTEs in the direct map not present can only be done if the direct map is
set up at 4k granularity in the first place (as ARM's break-before-make
semantics do not easily allow breaking apart large/gigantic pages).
More precisely, on arm64 systems with !can_set_direct_map(),
set_direct_map_invalid_noflush() is a no-op, however it returns success
(0) instead of an error. This means that memfd_secret will seemingly
"work" (e.g. syscall succeeds, you can mmap the fd and fault in pages),
but it does not actually achieve its goal of removing its memory from the
direct map.
Note that with this patch, memfd_secret() will start erroring on systems
where can_set_direct_map() returns false (arm64 with
CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and
CONFIG_KFENCE=n), but that still seems better than the current silent
failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most
arm64 systems actually have a working memfd_secret() and aren't be
affected.
From going through the iterations of the original memfd_secret patch
series, it seems that disabling the syscall in these scenarios was the
intended behavior [1] (preferred over having
set_direct_map_invalid_noflush return an error as that would result in
SIGBUSes at page-fault time), however the check for it got dropped between
v16 [2] and v17 [3], when secretmem moved away from CMA allocations.
[1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/
[2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t
[3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/
Link: https://lkml.kernel.org/r/20241001080056.784735-1-roypat@amazon.co.uk
Fixes:
|
||
|
Alexander Gordeev
|
e5a0031c79 |
fs/proc/kcore.c: allow translation of physical memory addresses
commit 3d5854d75e3187147613130561b58f0b06166172 upstream. When /proc/kcore is read an attempt to read the first two pages results in HW-specific page swap on s390 and another (so called prefix) pages are accessed instead. That leads to a wrong read. Allow architecture-specific translation of memory addresses using kc_xlate_dev_mem_ptr() and kc_unxlate_dev_mem_ptr() callbacks similarily to /dev/mem xlate_dev_mem_ptr() and unxlate_dev_mem_ptr() callbacks. That way an architecture can deal with specific physical memory ranges. Re-use the existing /dev/mem callback implementation on s390, which handles the described prefix pages swapping correctly. For other architectures the default callback is basically NOP. It is expected the condition (vaddr == __va(__pa(vaddr))) always holds true for KCORE_RAM memory type. Link: https://lkml.kernel.org/r/20240930122119.1651546-1-agordeev@linux.ibm.com Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Suggested-by: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Frederic Weisbecker
|
19a5029981 |
kthread: unpark only parked kthread
commit 214e01ad4ed7158cab66498810094fac5d09b218 upstream.
Calling into kthread unparking unconditionally is mostly harmless when
the kthread is already unparked. The wake up is then simply ignored
because the target is not in TASK_PARKED state.
However if the kthread is per CPU, the wake up is preceded by a call
to kthread_bind() which expects the task to be inactive and in
TASK_PARKED state, which obviously isn't the case if it is unparked.
As a result, calling kthread_stop() on an unparked per-cpu kthread
triggers such a warning:
WARNING: CPU: 0 PID: 11 at kernel/kthread.c:525 __kthread_bind_mask kernel/kthread.c:525
<TASK>
kthread_stop+0x17a/0x630 kernel/kthread.c:707
destroy_workqueue+0x136/0xc40 kernel/workqueue.c:5810
wg_destruct+0x1e2/0x2e0 drivers/net/wireguard/device.c:257
netdev_run_todo+0xe1a/0x1000 net/core/dev.c:10693
default_device_exit_batch+0xa14/0xa90 net/core/dev.c:11769
ops_exit_list net/core/net_namespace.c:178 [inline]
cleanup_net+0x89d/0xcc0 net/core/net_namespace.c:640
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd70 kernel/workqueue.c:3393
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Fix this with skipping unecessary unparking while stopping a kthread.
Link: https://lkml.kernel.org/r/20240913214634.12557-1-frederic@kernel.org
Fixes:
|
||
|
Luca Stefani
|
f00545e838 |
btrfs: split remaining space to discard in chunks
commit a99fcb0158978ed332009449b484e5f3ca2d7df4 upstream. Per Qu Wenruo in case we have a very large disk, e.g. 8TiB device, mostly empty although we will do the split according to our super block locations, the last super block ends at 256G, we can submit a huge discard for the range [256G, 8T), causing a large delay. Split the space left to discard based on BTRFS_MAX_DISCARD_CHUNK_SIZE in preparation of introduction of cancellation points to trim. The value of the chunk size is arbitrary, it can be higher or derived from actual device capabilities but we can't easily read that using bio_discard_limit(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180 Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737 CC: stable@vger.kernel.org # 5.15+ Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Mathieu Desnoyers
|
73a4f5a704 |
selftests/rseq: Fix mm_cid test failure
commit a0cc649353bb726d4aa0db60dce467432197b746 upstream.
Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by:
glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)")
Without this fix, rseq selftests for mm_cid fail:
./run_param_test.sh
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running mm_cid test spinlock
Error: cpu id getter unavailable
Fixes:
|
||
|
Donet Tom
|
87070a96b1 |
selftests/mm: fix incorrect buffer->mirror size in hmm2 double_map test
commit 76503e1fa1a53ef041a120825d5ce81c7fe7bdd7 upstream.
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com
Fixes:
|
||
|
Zhang Rui
|
bd3222d47f |
powercap: intel_rapl_tpmi: Fix bogus register reading
commit 91e8f835a7eda4ba2c0c4002a3108a0e3b22d34e upstream. The TPMI_RAPL_REG_DOMAIN_INFO value needs to be multiplied by 8 to get the register offset. Cc: All applicable <stable@vger.kernel.org> Fixes: 903eb9fb85e3 ("powercap: intel_rapl_tpmi: Fix System Domain probing") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://patch.msgid.link/20240930081801.28502-2-rui.zhang@intel.com [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Yonatan Maman
|
697e3ddcf1 |
nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error
commit 835745a377a4519decd1a36d6b926e369b3033e2 upstream.
The `nouveau_dmem_copy_one` function ensures that the copy push command is
sent to the device firmware but does not track whether it was executed
successfully.
In the case of a copy error (e.g., firmware or hardware failure), the
copy push command will be sent via the firmware channel, and
`nouveau_dmem_copy_one` will likely report success, leading to the
`migrate_to_ram` function returning a dirty HIGH_USER page to the user.
This can result in a security vulnerability, as a HIGH_USER page that may
contain sensitive or corrupted data could be returned to the user.
To prevent this vulnerability, we allocate a zero page. Thus, in case of
an error, a non-dirty (zero) page will be returned to the user.
Fixes:
|
||
|
Kun(llfl)
|
b822007e8d |
device-dax: correct pgoff align in dax_set_mapping()
commit 7fcbd9785d4c17ea533c42f20a9083a83f301fa6 upstream.
pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise,
vmf->address not aligned to fault_size will be aligned to the next
alignment, that can result in memory failure getting the wrong address.
It's a subtle situation that only can be observed in
page_mapped_in_vma() after the page is page fault handled by
dev_dax_huge_fault. Generally, there is little chance to perform
page_mapped_in_vma in dev-dax's page unless in specific error injection
to the dax device to trigger an MCE - memory-failure. In that case,
page_mapped_in_vma() will be triggered to determine which task is
accessing the failure address and kill that task in the end.
We used self-developed dax device (which is 2M aligned mapping) , to
perform error injection to random address. It turned out that error
injected to non-2M-aligned address was causing endless MCE until panic.
Because page_mapped_in_vma() kept resulting wrong address and the task
accessing the failure address was never killed properly:
[ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.049006] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.448042] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3784.792026] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.162502] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.461116] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3785.764730] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.042128] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.464293] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3786.818090] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
[ 3787.085297] mce: Uncorrected hardware memory error in user-access at
200c9742380
[ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page:
Recovered
It took us several weeks to pinpoint this problem, but we eventually
used bpftrace to trace the page fault and mce address and successfully
identified the issue.
Joao added:
; Likely we never reproduce in production because we always pin
: device-dax regions in the region align they provide (Qemu does
: similarly with prealloc in hugetlb/file backed memory). I think this
: bug requires that we touch *unpinned* device-dax regions unaligned to
: the device-dax selected alignment (page size i.e. 4K/2M/1G)
Link: https://lkml.kernel.org/r/23c02a03e8d666fef11bbe13e85c69c8b4ca0624.1727421694.git.llfl@linux.alibaba.com
Fixes:
|
||
|
Matthieu Baerts (NGI0)
|
8b36f4dcac |
mptcp: pm: do not remove closing subflows
commit db0a37b7ac27d8ca27d3dc676a16d081c16ec7b9 upstream.
In a previous fix, the in-kernel path-manager has been modified not to
retrigger the removal of a subflow if it was already closed, e.g. when
the initial subflow is removed, but kept in the subflows list.
To be complete, this fix should also skip the subflows that are in any
closing state: mptcp_close_ssk() will initiate the closure, but the
switch to the TCP_CLOSE state depends on the other peer.
Fixes: 58e1b66b4e4b ("mptcp: pm: do not remove already closed subflows")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-4-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Paolo Abeni
|
b8be15d1ae |
mptcp: handle consistently DSS corruption
commit e32d262c89e2b22cb0640223f953b548617ed8a6 upstream.
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.
Fixes:
|
||
|
Christian Marangi
|
143ffa7878 |
net: phy: Remove LED entry from LEDs list on unregister
commit f50b5d74c68e551667e265123659b187a30fe3a5 upstream. Commit |
||
|
Anatolij Gustschin
|
28a2c3e51d |
net: dsa: lan9303: ensure chip reset and wait for READY status
commit 5c14e51d2d7df49fe0d4e64a12c58d2542f452ff upstream.
Accessing device registers seems to be not reliable, the chip
revision is sometimes detected wrongly (0 instead of expected 1).
Ensure that the chip reset is performed via reset GPIO and then
wait for 'Device Ready' status in HW_CFG register before doing
any register initializations.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Anastasia Kovaleva
|
3be342e033 |
net: Fix an unsafe loop on the list
commit 1dae9f1187189bc09ff6d25ca97ead711f7e26f9 upstream.
The kernel may crash when deleting a genetlink family if there are still
listeners for that family:
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000c080bc] netlink_update_socket_mc+0x3c/0xc0
LR [c000000000c0f764] __netlink_clear_multicast_users+0x74/0xc0
Call Trace:
__netlink_clear_multicast_users+0x74/0xc0
genl_unregister_family+0xd4/0x2d0
Change the unsafe loop on the list to a safe one, because inside the
loop there is an element removal from this list.
Fixes:
|
||
|
Ignat Korchagin
|
563e6892e2 |
net: explicitly clear the sk pointer, when pf->create fails
commit 631083143315d1b192bd7d915b967b37819e88ea upstream.
We have recently noticed the exact same KASAN splat as in commit
6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket
creation fails"). The problem is that commit did not fully address the
problem, as some pf->create implementations do not use sk_common_release
in their error paths.
For example, we can use the same reproducer as in the above commit, but
changing ping to arping. arping uses AF_PACKET socket and if packet_create
fails, it will just sk_free the allocated sk object.
While we could chase all the pf->create implementations and make sure they
NULL the freed sk object on error from the socket, we can't guarantee
future protocols will not make the same mistake.
So it is easier to just explicitly NULL the sk pointer upon return from
pf->create in __sock_create. We do know that pf->create always releases the
allocated sk object on error, so if the pointer is not NULL, it is
definitely dangling.
Fixes: 6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket creation fails")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241003170151.69445-1-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Niklas Cassel
|
31c62224e9 |
ata: libata: avoid superfluous disk spin down + spin up during hibernation
commit a38719e3157118428e34fbd45b0d0707a5877784 upstream. A user reported that commit |
||
|
Matthieu Baerts (NGI0)
|
a448ced308 |
mptcp: fallback when MPTCP opts are dropped after 1st data
commit 119d51e225febc8152476340a880f5415a01e99e upstream.
As reported by Christoph [1], before this patch, an MPTCP connection was
wrongly reset when a host received a first data packet with MPTCP
options after the 3wHS, but got the next ones without.
According to the MPTCP v1 specs [2], a fallback should happen in this
case, because the host didn't receive a DATA_ACK from the other peer,
nor receive data for more than the initial window which implies a
DATA_ACK being received by the other peer.
The patch here re-uses the same logic as the one used in other places:
by looking at allow_infinite_fallback, which is disabled at the creation
of an additional subflow. It's not looking at the first DATA_ACK (or
implying one received from the other side) as suggested by the RFC, but
it is in continuation with what was already done, which is safer, and it
fixes the reported issue. The next step, looking at this first DATA_ACK,
is tracked in [4].
This patch has been validated using the following Packetdrill script:
0 socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// 3WHS is OK
+0.0 < S 0:0(0) win 65535 <mss 1460, sackOK, nop, nop, nop, wscale 6, mpcapable v1 flags[flag_h] nokey>
+0.0 > S. 0:0(0) ack 1 <mss 1460, nop, nop, sackOK, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey]>
+0.1 < . 1:1(0) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[ckey=2, skey]>
+0 accept(3, ..., ...) = 4
// Data from the client with valid MPTCP options (no DATA_ACK: normal)
+0.1 < P. 1:501(500) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[skey, ckey] mpcdatalen 500, nop, nop>
// From here, the MPTCP options will be dropped by a middlebox
+0.0 > . 1:1(0) ack 501 <dss dack8=501 dll=0 nocs>
+0.1 read(4, ..., 500) = 500
+0 write(4, ..., 100) = 100
// The server replies with data, still thinking MPTCP is being used
+0.0 > P. 1:101(100) ack 501 <dss dack8=501 dsn8=1 ssn=1 dll=100 nocs, nop, nop>
// But the client already did a fallback to TCP, because the two previous packets have been received without MPTCP options
+0.1 < . 501:501(0) ack 101 win 2048
+0.0 < P. 501:601(100) ack 101 win 2048
// The server should fallback to TCP, not reset: it didn't get a DATA_ACK, nor data for more than the initial window
+0.0 > . 101:101(0) ack 601
Note that this script requires Packetdrill with MPTCP support, see [3].
Fixes:
|
||
|
Avri Altman
|
7994a4849c |
scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
commit d5130c5a093257aa4542aaded8034ef116a7624a upstream.
Replace manual offset calculations for response_upiu and prd_table in
ufshcd_init_lrb() with pre-calculated offsets already stored in the
utp_transfer_req_desc structure. The pre-calculated offsets are set
differently in ufshcd_host_memory_configure() based on the
UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk, ensuring correct alignment and
access.
Fixes:
|
||
|
Daniel Palmer
|
e04642a207 |
scsi: wd33c93: Don't use stale scsi_pointer value
commit 9023ed8d91eb1fcc93e64dc4962f7412b1c4cbec upstream. A regression was introduced with commit |
||
|
Luiz Augusto von Dentz
|
8676393007 |
Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync
commit 18fd04ad856df07733f5bb07e7f7168e7443d393 upstream.
This checks if the ACL connection remains valid as it could be destroyed
while hci_enhanced_setup_sync is pending on cmd_sync leading to the
following trace:
BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60
Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37
CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? hci_enhanced_setup_sync+0x91b/0xa60
print_report+0x152/0x4c0
? hci_enhanced_setup_sync+0x91b/0xa60
? __virt_addr_valid+0x1fa/0x420
? hci_enhanced_setup_sync+0x91b/0xa60
kasan_report+0xda/0x1b0
? hci_enhanced_setup_sync+0x91b/0xa60
hci_enhanced_setup_sync+0x91b/0xa60
? __pfx_hci_enhanced_setup_sync+0x10/0x10
? __pfx___mutex_lock+0x10/0x10
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? assign_work+0x167/0x240
worker_thread+0x5b7/0xf60
? __kthread_parkme+0xac/0x1c0
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x293/0x360
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 34:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__hci_conn_add+0x187/0x17d0
hci_connect_sco+0x2e1/0xb90
sco_sock_connect+0x2a2/0xb80
__sys_connect+0x227/0x2a0
__x64_sys_connect+0x6d/0xb0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 37:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x101/0x160
kfree+0xd0/0x250
device_release+0x9a/0x210
kobject_put+0x151/0x280
hci_conn_del+0x448/0xbf0
hci_abort_conn_sync+0x46f/0x980
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
worker_thread+0x5b7/0xf60
kthread+0x293/0x360
ret_from_fork+0x2f/0x70
ret_from_fork_asm+0x1a/0x30
Cc: stable@vger.kernel.org
Fixes:
|