[ Upstream commit 140c6a61d83cbd85adba769b5ef8d61acfa5b392 ]
Currently, when a non-DFS channel is brought up and the bandwidth is
expanded from 80 MHz to 160 MHz, where the primary 80 MHz is non-DFS
and the secondary 80 MHz consists of DFS channels, radar detection
fails if radar occurs in the secondary 80 MHz.
When the channel is switched from 80 MHz to 160 MHz, with the primary
80 MHz being non-DFS and the secondary 80 MHz consisting of DFS
channels, the radar required flag in the channel switch parameters
is set to true. However, when using a reserved channel context,
it is not updated in sdata, which disables radar detection in the
secondary 80 MHz DFS channels.
Update the radar required flag in sdata to fix this issue when using
a reserved channel context.
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Ramasamy Kaliappan <ramasamy.kaliappan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250608140324.1687117-1-ramasamy.kaliappan@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01f60348d8fb6b3fbcdfc7bdde5d669f95b009a4 ]
[why]
DCN35 is having “DC: failed to blank crtc!” when running HPO
test cases. It's caused by not having sufficient udelay time.
[how]
Replace the old wait_for_blank_complete function with fsleep function to
sleep just until the next frame should come up. This way it doesn't poll
in case the pixel clock or other clock was bugged or until vactive and
the vblank are hit again.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wen Chen <Wen.Chen3@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3ad987e9dc7d1e12e3f2f1e623f0e174cd0ca78 ]
The 'index' variable in the rs_fill_link_cmd() function can reach
LINK_QUAL_MAX_RETRY_NUM during the execution of the inner loop. This
variable is used as an index for the lq_cmd->rs_table array, which has a
size of LINK_QUAL_MAX_RETRY_NUM, without proper validation.
Modify the condition of the inner loop to ensure that the 'index' variable
does not exceed LINK_QUAL_MAX_RETRY_NUM - 1, thereby preventing any
potential overflow issues.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Link: https://patch.msgid.link/20240313101755.269209-1-rand.sec96@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9903c0986f782dfc511d7638b6f15fb6e8600cd3 ]
When both AP/STA and monitor interfaces are enabled, ieee80211_tx_status()
is invoked from two paths: the TX completion handler for data frames
and the WMI TX completion handler for management frames.
In the data path, the skb->cb is properly zeroed using memset, but in
the WMI path, this step is missing.
As a result, mac80211 encountered uninitialized (junk) values in
skb->cb when generating the radiotap header for monitor mode, leading
to invalid radiotap lengths.
Hence, explicitly zero the status field in the skb->cb using memset
in WMI TX completion path to ensure consistent and correct behavior
during WMI tx completion path.
Additionally, set info->status.rates[0].idx = -1 to indicate that
no valid rate information is available, avoiding misinterpretation of
garbage values.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250603063512.1887652-1-quic_sarishar@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7ad21258f9e9a7f58b19595d5ceed2cde3bed68 ]
In the current implementation, IP coalescing is always enabled and
cannot be disabled.
As setting maximum frames to 0 or 1, or setting delay to zero implies
immediate delivery of single packets/IRQs, disable coalescing in
hardware in these cases.
This also guarantees that coalescing is never enabled with ICFT or ICTT
set to zero, a configuration that could lead to unpredictable behaviour
according to i.MX8MP reference manual.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250626-fec_deactivate_coalescing-v2-1-0b217f2e80da@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94f39804d891cffe4ce17737d295f3b195bc7299 ]
The issue originates when Strongswan initiates an XFRM_MSG_ALLOCSPI
Netlink message, which triggers the kernel function xfrm_alloc_spi().
This function is expected to ensure uniqueness of the Security Parameter
Index (SPI) for inbound Security Associations (SAs). However, it can
return success even when the requested SPI is already in use, leading
to duplicate SPIs assigned to multiple inbound SAs, differentiated
only by their destination addresses.
This behavior causes inconsistencies during SPI lookups for inbound packets.
Since the lookup may return an arbitrary SA among those with the same SPI,
packet processing can fail, resulting in packet drops.
According to RFC 4301 section 4.4.2 , for inbound processing a unicast SA
is uniquely identified by the SPI and optionally protocol.
Reproducing the Issue Reliably:
To consistently reproduce the problem, restrict the available SPI range in
charon.conf : spi_min = 0x10000000 spi_max = 0x10000002
This limits the system to only 2 usable SPI values.
Next, create more than 2 Child SA. each using unique pair of src/dst address.
As soon as the 3rd Child SA is initiated, it will be assigned a duplicate
SPI, since the SPI pool is already exhausted.
With a narrow SPI range, the issue is consistently reproducible.
With a broader/default range, it becomes rare and unpredictable.
Current implementation:
xfrm_spi_hash() lookup function computes hash using daddr, proto, and family.
So if two SAs have the same SPI but different destination addresses, then
they will:
a. Hash into different buckets
b. Be stored in different linked lists (byspi + h)
c. Not be seen in the same hlist_for_each_entry_rcu() iteration.
As a result, the lookup will result in NULL and kernel allows that Duplicate SPI
Proposed Change:
xfrm_state_lookup_spi_proto() does a truly global search - across all states,
regardless of hash bucket and matches SPI and proto.
Signed-off-by: Aakash Kumar S <saakashkumar@marvell.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e8ebfe677f9101bbfe1f75d548a5aec581e8213 ]
Since f916dd32a943 ("arm64/fpsimd: ptrace: Mandate SVE payload for
streaming-mode state") we reject attempts to write to the streaming mode
regset even if there is no register data supplied, causing the tests for
setting vector lengths and setting SVE_VL_INHERIT in sve-ptrace to
spuriously fail. Set the flag to avoid the issue, we still support not
supplying register data.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250609-kselftest-arm64-ssve-fixups-v2-3-998fcfa6f240@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac9c50c79eaef5fca0f165e45d0c5880606db53e ]
Restart the MCU and release the patch semaphore before loading the MCU
patch firmware from the host.
This fixes failures upon error recovery in case the semaphore was
previously taken and never released by the host.
This happens from time to time upon triggering a full-chip error
recovery. Under this circumstance, the hardware restart fails and the
radio is rendered inoperational.
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://patch.msgid.link/20250402004528.1036715-3-mail@david-bauer.net
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a1ff88ec5b60b41ba830c5bf08b6cd8f45ab411 ]
This resolves a potential deadlock vs msm_gem_vm_close(). Otherwise for
_NO_SHARE buffers msm_gem_describe() could be trying to acquire the
shared vm resv, while already holding priv->obj_lock. But _vm_close()
might drop the last reference to a GEM obj while already holding the vm
resv, and msm_gem_free_object() needs to grab priv->obj_lock, a locking
inversion.
OTOH this is only for debugfs and it isn't critical if we undercount by
skipping a locked obj. So just use trylock() and move along if we can't
get the lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661525/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc2b722132893164bcb3cee4f08ed056e126eb6c ]
Currently, ieee80211_rx_data_set_sta() does not correctly handle the
case where the interface supports multiple links (MLO), but the station
does not (non-MLO). This can lead to incorrect link assignment or
unexpected warnings when accessing link information.
Hence, add a fix to check if the station lacks valid link support and
use its default link ID for rx->link assignment. If the station
unexpectedly has valid links, fall back to the default link.
This ensures correct link association and prevents potential issues
in mixed MLO/non-MLO environments.
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250630084119.3583593-1-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbd40f318cf2f59759bd170c401adc20ba360a3e ]
Since commit 63ed8de4be ("mld: add mc_lock for protecting
per-interface mld data"), every multicast resource is protected
by inet6_dev->mc_lock.
RTNL is unnecessary in terms of protection but still needed for
synchronisation between addrconf_ifdown() and __ipv6_dev_mc_inc().
Once we removed RTNL, there would be a race below, where we could
add a multicast address to a dead inet6_dev.
CPU1 CPU2
==== ====
addrconf_ifdown() __ipv6_dev_mc_inc()
if (idev->dead) <-- false
dead = true return -ENODEV;
ipv6_mc_destroy_dev() / ipv6_mc_down()
mutex_lock(&idev->mc_lock)
...
mutex_unlock(&idev->mc_lock)
mutex_lock(&idev->mc_lock)
...
mutex_unlock(&idev->mc_lock)
The race window can be easily closed by checking inet6_dev->dead
under inet6_dev->mc_lock in __ipv6_dev_mc_inc() as addrconf_ifdown()
will acquire it after marking inet6_dev dead.
Let's check inet6_dev->dead under mc_lock in __ipv6_dev_mc_inc().
Note that now __ipv6_dev_mc_inc() no longer depends on RTNL and
we can remove ASSERT_RTNL() there and the RTNL comment above
addrconf_join_solict().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250702230210.3115355-4-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b04716cdcac37bdbacde34def08bc6fdb5fc4e2 ]
When SAE commit is sent and received in response, there's no
ordering for the SAE confirm messages. As such, don't call
drivers to stop listening on the channel when the confirm
message is still expected.
This fixes an issue if the local confirm is transmitted later
than the AP's confirm, for iwlwifi (and possibly mt76) the
AP's confirm would then get lost since the device isn't on
the channel at the time the AP transmit the confirm.
For iwlwifi at least, this also improves the overall timing
of the authentication handshake (by about 15ms according to
the report), likely since the session protection won't be
aborted and rescheduled.
Note that even before this, mgd_complete_tx() wasn't always
called for each call to mgd_prepare_tx() (e.g. in the case
of WEP key shared authentication), and the current drivers
that have the complete callback don't seem to mind. Document
this as well though.
Reported-by: Jan Hendrik Farr <kernel@jfarr.cc>
Closes: https://lore.kernel.org/all/aB30Ea2kRG24LINR@archlinux/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.12691580e140.I3f1d3127acabcd58348a110ab11044213cf147d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 155213a2aed42c85361bf4f5c817f5cb68951c3b ]
schbench (https://github.com/masoncl/schbench.git) is showing a
regression from previous production kernels that bisected down to:
sched/fair: Remove sysctl_sched_migration_cost condition (c5b0a7eefc)
The schbench command line was:
schbench -L -m 4 -M auto -t 256 -n 0 -r 0 -s 0
This creates 4 message threads pinned to CPUs 0-3, and 256x4 worker
threads spread across the rest of the CPUs. Neither the worker threads
or the message threads do any work, they just wake each other up and go
back to sleep as soon as possible.
The end result is the first 4 CPUs are pegged waking up those 1024
workers, and the rest of the CPUs are constantly banging in and out of
idle. If I take a v6.9 Linus kernel and revert that one commit,
performance goes from 3.4M RPS to 5.4M RPS.
schedstat shows there are ~100x more new idle balance operations, and
profiling shows the worker threads are spending ~20% of their CPU time
on new idle balance. schedstats also shows that almost all of these new
idle balance attemps are failing to find busy groups.
The fix used here is to crank up the cost of the newidle balance whenever it
fails. Since we don't want sd->max_newidle_lb_cost to grow out of
control, this also changes update_newidle_cost() to use
sysctl_sched_migration_cost as the upper limit on max_newidle_lb_cost.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250626144017.1510594-2-clm@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b367017cdac21781a74eff4e208d3d38e1f38d3f ]
When an stp sync check is handled on a system with multiple
cpus each cpu gets a machine check but only the first one
actually handles the sync operation. All other CPUs spin
waiting for the first one to finish with a short udelay().
But udelay can't be used here as the first CPU modifies tod_clock_base
before performing the sync op. During this timeframe
get_tod_clock_monotonic() might return a non-monotonic time.
The time spent waiting should be very short and udelay is a busy loop
anyways, therefore simply remove the udelay.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f25a7eaa897f21396e99f90809af82ca553c9d14 ]
The Renesas RZ/G3E SMARC EVK uses KSZ9131RNXC phy. On deep power state,
PHY loses the power and on wakeup the rgmii delays are not reconfigured
causing it to fail.
Replace the callback kszphy_resume()->ksz9131_resume() for reconfiguring
the rgmii_delay when it exits from PM suspend state.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250711054029.48536-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53d20606c40678d425cc03f0978c614dca51f25e ]
The buffer bgx_sel used in snprintf() was too small to safely hold
the formatted string "BGX%d" for all valid bgx_id values. This caused
a -Wformat-truncation warning with `Werror` enabled during build.
Increase the buffer size from 5 to 7 and use `sizeof(bgx_sel)` in
snprintf() to ensure safety and suppress the warning.
Build warning:
CC drivers/net/ethernet/cavium/thunder/thunder_bgx.o
drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function
‘bgx_acpi_match_id’:
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:27: error: ‘%d’
directive output may be truncated writing between 1 and 3 bytes into a
region of size 2 [-Werror=format-truncation=]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:23: note:
directive argument in the range [0, 255]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~~~~~~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:2: note:
‘snprintf’ output between 5 and 7 bytes into a destination of size 5
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
compiler warning due to insufficient snprintf buffer size.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250711140532.2463602-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e30ecf23b1b8f091f7d08b27968dea83aae7908 ]
Currently, __mkroute_output overrules the MTU value configured for
broadcast routes.
This buggy behaviour can be reproduced with:
ip link set dev eth1 mtu 9000
ip route del broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2
ip route add broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 mtu 1500
The maximum packet size should be 1500, but it is actually 8000:
ping -b 192.168.0.255 -s 8000
Fix __mkroute_output to allow MTU values to be configured for
for broadcast routes (to support a mixed-MTU local-area-network).
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Link: https://patch.msgid.link/20250710142714.12986-1-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3954502377ec05a1b37e2dc9bef0bacd4bbd71b2 ]
Disallow bind() calls that have the same arguments as existing bound
sockets. Previously multiple sockets could bind() to the same
type/local address, with an arbitrary socket receiving matched messages.
This is only a partial fix, a future commit will define precedence order
for MCTP_ADDR_ANY versus specific EID bind(), which are allowed to exist
together.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20250710-mctp-bind-v4-2-8ec2f6460c56@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90c09d57caeca94e6f3f87c49e96a91edd40cbfd ]
On kernels built with CONFIG_IRQ_WORK=y, when rcu_read_unlock() is
invoked within an interrupts-disabled region of code [1], it will invoke
rcu_read_unlock_special(), which uses an irq-work handler to force the
system to notice when the RCU read-side critical section actually ends.
That end won't happen until interrupts are enabled at the soonest.
In some kernels, such as those booted with rcutree.use_softirq=y, the
irq-work handler is used unconditionally.
The per-CPU rcu_data structure's ->defer_qs_iw_pending field is
updated by the irq-work handler and is both read and updated by
rcu_read_unlock_special(). This resulted in the following KCSAN splat:
------------------------------------------------------------------------
BUG: KCSAN: data-race in rcu_preempt_deferred_qs_handler / rcu_read_unlock_special
read to 0xffff96b95f42d8d8 of 1 bytes by task 90 on cpu 8:
rcu_read_unlock_special+0x175/0x260
__rcu_read_unlock+0x92/0xa0
rt_spin_unlock+0x9b/0xc0
__local_bh_enable+0x10d/0x170
__local_bh_enable_ip+0xfb/0x150
rcu_do_batch+0x595/0xc40
rcu_cpu_kthread+0x4e9/0x830
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
write to 0xffff96b95f42d8d8 of 1 bytes by task 88 on cpu 8:
rcu_preempt_deferred_qs_handler+0x1e/0x30
irq_work_single+0xaf/0x160
run_irq_workd+0x91/0xc0
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
no locks held by irq_work/8/88.
irq event stamp: 200272
hardirqs last enabled at (200272): [<ffffffffb0f56121>] finish_task_switch+0x131/0x320
hardirqs last disabled at (200271): [<ffffffffb25c7859>] __schedule+0x129/0xd70
softirqs last enabled at (0): [<ffffffffb0ee093f>] copy_process+0x4df/0x1cc0
softirqs last disabled at (0): [<0000000000000000>] 0x0
------------------------------------------------------------------------
The problem is that irq-work handlers run with interrupts enabled, which
means that rcu_preempt_deferred_qs_handler() could be interrupted,
and that interrupt handler might contain an RCU read-side critical
section, which might invoke rcu_read_unlock_special(). In the strict
KCSAN mode of operation used by RCU, this constitutes a data race on
the ->defer_qs_iw_pending field.
This commit therefore disables interrupts across the portion of the
rcu_preempt_deferred_qs_handler() that updates the ->defer_qs_iw_pending
field. This suffices because this handler is not a fast path.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a601b2d35623065d31ebaf697b07502d54878c9 ]
qdisc_sleeping variable is declared as "struct Qdisc __rcu" and
as such needs proper annotation while accessing it.
Without rtnl_dereference(), the following error is generated by sparse:
drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: warning:
incorrect type in initializer (different address spaces)
drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: expected
struct Qdisc *qdisc
drivers/net/ethernet/mellanox/mlx5/core/en/qos.c:377:40: got struct
Qdisc [noderef] __rcu *qdisc_sleeping
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1752675472-201445-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 671be46afd1f03de9dc6e4679c88e1a7a81cdff6 ]
This read_poll_timeout_atomic() with a delay of 1 µs and a timeout of
1000000 µs can take ~250 seconds in the worst case because sending a
USB control message takes ~250 µs.
Lower the timeout to 4000 for USB in order to reduce the maximum polling
time to ~1 second.
This problem was observed with RTL8851BU while suspending to RAM with
WOWLAN enabled. The computer sat for 4 minutes with a black screen
before suspending.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/09313da6-c865-4e91-b758-4cb38a878796@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4701ee5044fb3992f1c910630a9673c2dc600ce5 ]
The TCP header fields seq and ack_seq are 32-bit values in network
byte order as (__be32). these fields were earlier printed using
ntohs(), which converts only 16-bit values and produces incorrect
results for 32-bit fields. This patch is changeing the conversion
to ntohl(), ensuring correct interpretation of these sequence numbers.
Notably, the format specifier is updated from %d to %u to reflect the
unsigned nature of these fields.
improves the accuracy of debug log messages for TCP sequence and
acknowledgment numbers during TX timeouts.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250717193552.3648791-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09e7e29d2b49ba84bcefb3dc1657726d2de5bb24 ]
Otherwise the code might not work correctly when the clock
is changed.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61f7e318e99d3b398670518dd3f4f8510d1800fc ]
If a default variable contains itself, do not recurse on it.
For example:
ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
The above works because the temp variable ADD_CONFIG (is a temp because it
is created with ":=") is already defined, it will be substituted in the
variable option. But if it gets commented out:
# ADD_CONFIG := ${CONFIG_DIR}/temp_config
DEFAULTS
ADD_CONFIG = ${CONFIG_DIR}/default_config ${ADD_CONFIG}
Then the above will go into a recursive loop where ${ADD_CONFIG} will
get replaced with the current definition of ADD_CONFIG which contains the
${ADD_CONFIG} and that will also try to get converted. ktest.pl will error
after 100 attempts of recursion and fail.
When replacing a variable with the default variable, if the default
variable contains itself, do not replace it.
Cc: "John Warthog9 Hawley" <warthog9@kernel.org>
Cc: Dhaval Giani <dhaval.giani@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/20250718202053.732189428@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a2bf707270f897ab8077baee8ed5842a5321686 ]
Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(),
the tid value is already incremented, even though the corresponding
TID is not actually allocated. Proceed to
ath12k_dp_rx_peer_tid_delete() starting from unallocated tid,
which might leads to freeing unallocated TID and cause potential
crash or out-of-bounds access.
Hence, fix by correctly decrementing tid before cleanup to match only
the successfully allocated TIDs.
Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(),
as decrementing the tid before cleanup in loop will take care of this.
Compile tested only.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250721061749.886732-1-quic_sarishar@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 114a2de6fa86d99ed9546cc9113a3cad58beef79 ]
We found at Vates that there are lot of spurious interrupts when
benchmarking the xen-net PV driver frontend. This issue appeared with a
patch that addresses security issue XSA-391 (b27d47950e "xen/netfront:
harden netfront against event channel storms"). On an iperf benchmark,
spurious interrupts can represent up to 50% of the interrupts.
Spurious interrupts are interrupts that are rised for nothing, there is
no work to do. This appends because the function that handles the
interrupts ("xennet_tx_buf_gc") is also called at the end of the request
path to garbage collect the responses received during the transmission
load.
The request path is doing the work that the interrupt handler should
have done otherwise. This is particurary true when there is more than
one vcpu and get worse linearly with the number of vcpu/queue.
Moreover, this problem is amplifyed by the penalty imposed by a spurious
interrupt. When an interrupt is found spurious the interrupt chip will
delay the EOI to slowdown the backend. This delay will allow more
responses to be handled by the request path and then there will be more
chance the next interrupt will not find any work to do, creating a new
spurious interrupt.
This causes performance issue. The solution here is to remove the calls
from the request path and let the interrupt handler do the processing of
the responses. This approch removes most of the spurious interrupts
(<0.05%) and also has the benefit of freeing up cycles in the request
path, allowing it to process more work, which improves performance
compared to masking the spurious interrupt one way or another.
This optimization changes a part of the code that is present since the
net frontend driver was upstreamed. There is no similar pattern in the
other xen PV drivers. Since the first commit of xen-netfront is a blob
that doesn't explain all the design choices I can only guess why this
specific mecanism was here. This could have been introduce to compensate
a slow backend at the time (maybe the backend was fixed or optimize
later) or a small queue. In 18 years, both frontend and backend gain lot
of features and optimizations that could have obsolete the feature of
reaping completions from the TX path.
Some vif throughput performance figures from a 8 vCPUs, 4GB of RAM HVM
guest(s):
Without this patch on the :
vm -> dom0: 4.5Gb/s
vm -> vm: 7.0Gb/s
Without XSA-391 patch (revert of b27d47950e):
vm -> dom0: 8.3Gb/s
vm -> vm: 8.7Gb/s
With XSA-391 and this patch:
vm -> dom0: 11.5Gb/s
vm -> vm: 12.6Gb/s
v2:
- add revewed and tested by tags
- resend with the maintainers in the recipients list
v3:
- remove Fixes tag but keep the commit ref in the explanation
- add a paragraph on why this code was here
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@vates.tech>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Elliott Mitchell <ehem+xen@m5p.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250721093316.23560-1-anthoine.bourgeois@vates.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d7936e8a5b1fa803f4a631d2da4a80fa4f0f37f ]
Reset cookie value to 0 instead of 0xffffffff in hci_sock_free_cookie()
since:
0 : means cookie has not been assigned yet
0xffffffff: means cookie assignment failure
Also fix generating cookie failure with usage shown below:
hci_sock_gen_cookie(sk) // generate cookie
hci_sock_free_cookie(sk) // free cookie
hci_sock_gen_cookie(sk) // Can't generate cookie any more
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8167f4f42572818fa8153be2b03e4c2120846603 ]
Qcom lpass is using component->id to keep DAI ID (A).
(S) static int lpass_platform_pcmops_open(
sruct snd_soc_component *component,
struct snd_pcm_substream *substream)
{ ^^^^^^^^^(B0)
...
(B1) struct snd_soc_pcm_runtime *soc_runtime = snd_soc_substream_to_rtd(substream);
(B2) struct snd_soc_dai *cpu_dai = snd_soc_rtd_to_cpu(soc_runtime, 0);
...
(B3) unsigned int dai_id = cpu_dai->driver->id;
(A) component->id = dai_id;
...
}
This driver can get dai_id from substream (B0 - B3).
In this driver, below functions get dai_id from component->id (A).
(X) lpass_platform_pcmops_suspend()
(Y) lpass_platform_pcmops_resume()
(Z) lpass_platform_copy()
Here, (Z) can get it from substream (B0 - B3), don't need to use
component->id (A). On suspend/resume (X)(Y), dai_id can only be obtained
from component->id (A), because there is no substream (B0) in function
parameter.
But, component->id (A) itself should not be used for such purpose.
It is intilialized at snd_soc_component_initialize(), and parsed its ID
(= component->id) from device name (a).
int snd_soc_component_initialize(...)
{
...
if (!component->name) {
(a) component->name = fmt_single_name(dev, &component->id);
... ^^^^^^^^^^^^^
}
...
}
Unfortunately, current code is broken to start with.
There are many regmaps that the driver cares about, however its only
managing one (either dp or i2s) in component suspend/resume path.
I2S regmap is mandatory however other regmaps are setup based on flags
like "hdmi_port_enable" and "codec_dma_enable".
Correct thing for suspend/resume path to handle is by checking these
flags, instead of using component->id.
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a56ouuob.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
