The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The CEC pin framework is affected by NTP daemons speeding up or slowing
down the system clock. Document this and explain how to fix this for
chronyd.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The valid_la boolean is used to check if the destination logical
address is either 15 (broadcast) or our logical address. If it is
for another logical address, then only adapters that have the
CEC_CAP_MONITOR_ALL capability can pass it on.
However, it is also used to do more detailed validity checks,
such as whether the message was broadcast when it should have been
directed, or vice versa, in which case the message must be ignored
according to the spec. But that should not apply to monitoring.
Add a new bool that just checks the LA and nothing else.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The naming styles are different for some functions with 'check' in their
names. Some of them are like:
ext4_check_quota_consistency
ext4_check_test_dummy_encryption
ext4_check_opt_consistency
ext4_check_descriptors
ext4_check_feature_compatibility
While the others looks like below:
ext4_geometry_check
ext4_journal_data_mode_check
This is not a big deal and boils down to personal preference. But I'd
like to make them consistent.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20230323140517.1070239-6-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jakub Kicinski says:
====================
page_pool: allow caching from safely localized NAPI
I went back to the explicit "are we in NAPI method", mostly
because I don't like having both around :( (even tho I maintain
that in_softirq() && !in_hardirq() is as safe, as softirqs do
not nest).
Still returning the skbs to a CPU, tho, not to the NAPI instance.
I reckon we could create a small refcounted struct per NAPI instance
which would allow sockets and other users so hold a persisent
and safe reference. But that's a bigger change, and I get 90+%
recycling thru the cache with just these patches (for RR and
streaming tests with 100% CPU use it's almost 100%).
Some numbers for streaming test with 100% CPU use (from previous version,
but really they perform the same):
HW-GRO page=page
before after before after
recycle:
cached: 0 138669686 0 150197505
cache_full: 0 223391 0 74582
ring: 138551933 9997191 149299454 0
ring_full: 0 488 3154 127590
released_refcnt: 0 0 0 0
alloc:
fast: 136491361 148615710 146969587 150322859
slow: 1772 1799 144 105
slow_high_order: 0 0 0 0
empty: 1772 1799 144 105
refill: 2165245 156302 2332880 2128
waive: 0 0 0 0
v1: https://lore.kernel.org/all/20230411201800.596103-1-kuba@kernel.org/
rfcv2: https://lore.kernel.org/all/20230405232100.103392-1-kuba@kernel.org/
====================
Link: https://lore.kernel.org/r/20230413042605.895677-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt has 1:1 mapping of page pools and NAPIs, so it's safe
to hoook them up together.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent patches to mlx5 mentioned a regression when moving from
driver local page pool to only using the generic page pool code.
Page pool has two recycling paths (1) direct one, which runs in
safe NAPI context (basically consumer context, so producing
can be lockless); and (2) via a ptr_ring, which takes a spin
lock because the freeing can happen from any CPU; producer
and consumer may run concurrently.
Since the page pool code was added, Eric introduced a revised version
of deferred skb freeing. TCP skbs are now usually returned to the CPU
which allocated them, and freed in softirq context. This places the
freeing (producing of pages back to the pool) enticingly close to
the allocation (consumer).
If we can prove that we're freeing in the same softirq context in which
the consumer NAPI will run - lockless use of the cache is perfectly fine,
no need for the lock.
Let drivers link the page pool to a NAPI instance. If the NAPI instance
is scheduled on the same CPU on which we're freeing - place the pages
in the direct cache.
With that and patched bnxt (XDP enabled to engage the page pool, sigh,
bnxt really needs page pool work :() I see a 2.6% perf boost with
a TCP stream test (app on a different physical core than softirq).
The CPU use of relevant functions decreases as expected:
page_pool_refill_alloc_cache 1.17% -> 0%
_raw_spin_lock 2.41% -> 0.98%
Only consider lockless path to be safe when NAPI is scheduled
- in practice this should cover majority if not all of steady state
workloads. It's usually the NAPI kicking in that causes the skb flush.
The main case we'll miss out on is when application runs on the same
CPU as NAPI. In that case we don't use the deferred skb free path.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We maintain a NAPI-local cache of skbs which is fed by napi_consume_skb().
Going forward we will also try to cache head and data pages.
Plumb the "are we in a normal NAPI context" information thru
deeper into the freeing path, up to skb_release_data() and
skb_free_head()/skb_pp_recycle(). The "not normal NAPI context"
comes from netpoll which passes budget of 0 to try to reap
the Tx completions but not perform any Rx.
Use "bool napi_safe" rather than bare "int budget",
the further we get from NAPI the more confusing the budget
argument may seem (particularly whether 0 or MAX is the
correct value to pass in when not in NAPI).
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When cross building on debian to the mips 32-bit arch we get these
warnings:
In function '__cmd_test',
inlined from 'cmd_test' at tests/builtin-test.c:561:9:
tests/builtin-test.c:260:66: error: array subscript 1 is outside array bounds of 'struct test_suite *[1]' [-Werror=array-bounds]
260 | for (k = 0, t = tests[j][k]; tests[j][k]; k++, t = tests[j][k])
| ^
tests/builtin-test.c:369:9: note: in expansion of macro 'for_each_test'
369 | for_each_test(j, k, t) {
| ^~~~~~~~~~~~~
tests/builtin-test.c: In function 'cmd_test':
tests/builtin-test.c:36:27: note: at offset 4 into object 'arch_tests' of size 4
36 | struct test_suite *__weak arch_tests[] = {
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Switch to using a while(!sentinel) for the second level of the 'tests'
array to avoid that compiler complaint.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that ext4_writepages() gets journalled data into its final location
we just use filemap_write_and_wait() instead of special handling of
journalled data in ext4_bmap(). We can also drop EXT4_STATE_JDATA flag
as it is not used anymore.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-11-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that ext4_writepages() makes sure all journalled data is committed
and checkpointed, sync_filesystem() call done by dquot_quota_on() is
enough for quota IO to see uptodate data. So drop special handling of
journalled data from ext4_quota_on().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-10-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that ext4_writepages() makes sure journalled data is on stable
storage, write_inode_now() call in iput_final() is enough to make
pagecache pages with journalled data really clean (data committed and
checkpointed). So we can drop special handling of journalled data in
ext4_evict_inode().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-9-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The handling of journalled data in ext4_zero_range() is incomplete. We
do not need to commit running transaction but we rather need to
checkpoint pages with journalled data. If we don't, journal tail can be
advanced beyond transaction containing the journalled data and if we
then crash before committing the transaction doing the zeroing we will
have inconsistent (too old) data in the file. Make sure file pages with
journalled data are properly checkpointed before removing them from the
page cache.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-8-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When journalling data we currently just walk over pages, journal those
that are marked for delayed dirtying (only pinned pages dirtied behing
our back these days) and checkpoint other dirty pages. Because some
pages may be part of running transaction the result is that after
filemap_write_and_wait() we are not guaranteed pages are stable on disk.
Thus places that want to flush current pagecache content need to jump
through hoops to make sure journalled data is not lost. This is
manageable in cases completely controlled by ext4 (such as extent
shifting operations or inode eviction) but it gets ugly for stuff like
fsverity. Furthermore it is rather error prone as people often do not
realize journalled data needs special handling.
So change ext4_writepages() to commit transaction with inode's data
before going through the writeback loop in WB_SYNC_ALL mode. As a result
filemap_write_and_wait() is now really getting pages to stable storage
and makes pagecache pages safe to reclaim. Consequently we can remove
the special handling of journalled data from several places in follow up
patches.
Note that this will make fsync(2) for journalled data more expensive as
we will end up not only committing the transaction we need but also
checkpointing the data (which we may have previously skipped if the data
was part of the running transaction). If we really cared, we would need
to introduce special VFS function for writing out & invalidating page
cache for a range, use ->launder_page callback to perform checkpointing,
and use it from all the places that need this functionality. But at this
point I'm not convinced the complexity is worth it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With journalled data it can happen that checkpointing code will write
out page contents without clearing the page dirty bit. The logic in
ext4_page_nomap_can_writeout() then results in us never calling
mpage_submit_page() and thus clearing the dirty bit. Drop the
optimization with ext4_page_nomap_can_writeout() and just always call to
mpage_submit_page(). ext4_bio_write_page() knows when to redirty the
page and the additional clearing & setting of page dirty bit for ordered
mode writeout is not that expensive to jump through the hoops for it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we clear page dirty bit when we checkpoint some buffers from a
page with journalled data or when we perform delayed dirtying of a page
in ext4_writepages(). In a quest to simplify handling of journalled data
we want to keep page dirty as long as it has either buffers to
checkpoint or journalled dirty data. So make sure to keep page dirty in
ext4_writepages() if it still has journalled data attached to it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently pages with journalled data written by write(2) or modified by
block zeroing during truncate(2) are not marked as dirty. They are
dirtied only once the transaction commits. This however makes writeback
code think inode has no pages to write and so ext4_writepages() is not
called to make pages with journalled data persistent. Mark pages with
journalled data dirty (similarly as it happens for writes through mmap)
so that writeback code knows about them and ext4_writepages() can do
what it needs to to the inode.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When invalidating buffers under the partial tail page,
jbd2_journal_invalidate_folio() returns -EBUSY if the buffer is part of
the committing transaction as we cannot safely modify buffer state.
However if the buffer is already invalidated (due to previous
invalidation attempts from ext4_wait_for_tail_page_commit()), there's
nothing to do and there's no point in returning -EBUSY. This fixes
occasional warnings from ext4_journalled_invalidate_folio() triggered by
generic/051 fstest when blocksize < pagesize.
Fixes: 53e872681f ("ext4: fix deadlock in journal_unmap_buffer()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230329154950.19720-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Check if patterns and arguments for modify header action
are supported and enable them accordingly.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Support the pattern/args-based MODIFY_HDR and TNL_L3_TO_L2 actions in dbg dump
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Set modify header action of size 1 directly on the STE for supporting
devices, thus reducing number of hops and cache misses.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use the new accelerated action for decap L3 on RX side:
use the mechanism of pattern and argument same as in
modify-header action.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If there is support for pattern/args, use the new accelerated modify
header action for modify header and decap L3 actions.
Otherwise fall back to the old modify-header implementation.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
While building the actions, add the pointer of the arguments for
accelerated modify list action into the action's attributes.
This will be used later on while building the specific STE
for this action.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Added new mechanism for handling arguments for modify-header action.
The new action "accelerated modify-header" asks for the arguments from
separated area from the pattern, this area accessed via general objects.
Handling of these object is done via the pool-manager struct.
When the new header patterns are supported, while loading the domain,
a few pools for argument creations will be created. The requests for
allocating/deallocating arg objects are done via the pool manager API.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When allocating a QP we allocate an RQ and an SQ, the RQ is stored first
in memory and followed by the SQ.
This allocation is not physically continiuos - it may span across different
physical pages. SW Steering code always writes in pairs: 1BB write + 1BB read,
or 2 continuous BBs of GTA WQE.
This lead to an issue where RQ allocation was 4x16 which is equal to 1 WQE BB,
causing 1 BB offset in the page and splitting the GTA WQE between different
physical pages.
The solution was to create the RQ with a even number of BBs and to have the
RQ aligned to a page.
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Instead of using the write buffer for reading we will use a dedicated
buffer only for reading ICM memory.
Due to the new support for args, we can have a case with pending_wc
being odd number, and with reading into the same write buffer, it is
possible to overwrite next write on the same slot.
For example:
pending_wc is 17 so the buffer for write is:
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
and we have requests as follows:
r wr wr wr wr wr wr wr wr
Now, the first read will be written into the last write because we use
the same buffer for read and write, before it was written to the HW and
we will have a wrong data in the ICM area.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The accelerated modify header arguments are written in the HW area
with special WQE and specific data format.
New function was added to support writing of new argument type.
Note that GTA WQE is larger than READ and WRITE, so the queue
management logic was updated to support this.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add functions for creation/destruction of the new type of general object.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
