Qualcomm ARM32 DeviceTree updates for v6.4
stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need
to pass this information on the kernel commandline. Ath10k is wired up
to read calibration data from the "ART" partition.
PCI I/O port ranges are fixed on IPQ4019 and IPQ8064.
Supply clocks are defined for KPSS L2CC and ACC clock controllers.
Supply clocks for the global clock controller are being specified on
IPQ4019, MSM8974 and MSM8226.
PCIe RC support is enabled on the SDX55 T55 development board, IPA is
defined for the SDX55 and a number of cleanup patches are introduced.
Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms
are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and
MI01.6 boards.
* tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (28 commits)
dt-bindings: arm: qcom: Add Yiming LTE dongle uz801-v3.0 (yiming-uz801v3)
dt-bindings: vendor-prefixes: Add Henan Yiming Technology Co., Ltd.
ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatible
ARM: dts: qcom: sdx55-t55: Move "status" property down
ARM: dts: qcom: sdx55-t55: Enable PCIe RC support
ARM: dts: qcom: sdx55: List the property values vertically
ARM: dts: qcom: sdx55: Add support for PCIe RC controller
ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane}
ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node
ARM: dts: qcom: ipq8064: Fix the PCI I/O port range
ARM: dts: qcom: ipq4019: Fix the PCI I/O port range
ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges
dt-bindings: arm: qcom: Add ipq9574 compatible
ARM: dts: qcom: msm8974: add correct XO clock source to GCC node
ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes
ARM: dts: qcom: add missing clock configuration for kpss-acc-v1
ARM: dts: qcom: add and fix clock configuration for kpss-gcc nodes
ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes
dt-bindings: qcom: add ipq5332 boards
...
Link: https://lore.kernel.org/r/20230410155226.5127-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Annotate the function prototype and definition as noreturn to prevent
objtool warnings like:
vmlinux.o: warning: objtool: hyperv_init+0x55c: unreachable instruction
Also, as per Josh's suggestion, add it to the global_noreturns list.
As a comparison, an objdump output without the annotation:
[...]
1b63: mov $0x1,%esi
1b68: xor %edi,%edi
1b6a: callq ffffffff8102f680 <hv_ghcb_terminate>
1b6f: jmpq ffffffff82f217ec <hyperv_init+0x9c> # unreachable
1b74: cmpq $0xffffffffffffffff,-0x702a24(%rip)
[...]
Now, after adding the __noreturn to the function prototype:
[...]
17df: callq ffffffff8102f6d0 <hv_ghcb_negotiate_protocol>
17e4: test %al,%al
17e6: je ffffffff82f21bb9 <hyperv_init+0x469>
[...] <many insns>
1bb9: mov $0x1,%esi
1bbe: xor %edi,%edi
1bc0: callq ffffffff8102f680 <hv_ghcb_terminate>
1bc5: nopw %cs:0x0(%rax,%rax,1) # end of function
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/32453a703dfcf0d007b473c9acbf70718222b74b.1681342859.git.jpoimboe@kernel.org
If a global function doesn't return, and its prototype has the
__noreturn attribute, its weak counterpart must also not return so that
it matches the prototype and meets call site expectations.
To properly follow the compiled control flow at the call sites, change
the global_noreturns check to include both global and weak functions.
On the other hand, if a weak function isn't in global_noreturns, assume
the prototype doesn't have __noreturn. Even if the weak function
doesn't return, call sites treat it like a returnable function.
Fixes the following warning:
kernel/sched/build_policy.o: warning: objtool: do_idle() falls through to next function play_idle_precise()
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/ede3460d63f4a65d282c86f1175bd2662c2286ba.1681342859.git.jpoimboe@kernel.org
i.MX arm64 device tree changes for 6.4:
- New board device trees: Apalis quadmax, DH electronics i.MX8M Plus
DHCOM and PDK3, Data Modul i.MX8M Plus eDM SBC, Colibri Aster and
Iris, etc.
- Add FlexSPI, BBNSM and TPM PWM devices for i.MX93 SoC.
- A series of imx8mq-librem5 udpates which includes minor fixes,
magnetometer, CSI/camera support, and powersaving improvements.
- Add Cadence USB3 support for i.MX8QXP.
- Add FlexCAN support for i.MX8QXP and i.MX8QM.
- Add UART DMA support for i.MX8MQ.
- Add GPT devices for i.MX8MP.
- Add VPU decoder and encoder support for i.MX8QM.
- Add display pipeline and PCIe EP support for i.MX8M family SoCs.
- A series from Peng Fan updating various i.MX8M device trees to pinctrl
nodes match DT schema.
- A series from Philippe Schenker improving colibri-imx8x device trees
in various aspects.
- Other random device tree updates.
* tag 'imx-dt64-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (87 commits)
arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp: Add display pipeline components
arm64: dts: imx8mn: Add display pipeline components
arm64: dts: imx8mm: Add display pipeline components
arm64: dts: freescale: imx8qxp-mek: enable cadence usb3
arm64: dts: imx8qxp: add cadence usb3 support
arm64: dts: imx8mq-librem5: add missing #clock-cells
arm64: dts: imx8mm-prt8mm: update pinctrl to match dtschema
arm64: dts: imx8mn-bsh-smm: update pinctrl to match dtschema
arm64: dts: imx8mm-emcon: update pinctrl to match dtschema
arm64: dts: imx8mq-librem5: update pinctrl to match dtschema
arm64: dts: imx8mm-ddr4-evk: update gpmi pinctrl to match dtschema
arm64: dts: imx8mn-evk: update i2c pinctrl to match dtschema
arm64: dts: imx8mp: Add GPT blocks
arm64: dts: imx8-apalis-v1.1: drop ci-disable-lpm
arm64: dts: imx8dxl: drop clocks from scu clock controller
arm64: dts: imx8mp: verdin-yavia: drop disable-over-current
arm64: dts: imx8mq: tqma8mq-mba8mx: drop disable-over-current
arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK3
arm64: dts: colibri-imx8x: Add iris v2 carrier board
...
Link: https://lore.kernel.org/r/20230408101928.280271-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX arm32 device tree changes for 6.4:
- New board device trees: Tolino Vison, chargebyte Tarragon,
new revision of the IOTA board.
- A couple of imx7d-remarkable2 update to enable cyttsp5 touch and
BD71815 PMIC.
- A series from Oleksij Rempel to configure Ethernet reference clock
from device tree.
- A series from Stefan Wahren to use label references for i.MX28 based
boards.
* tag 'imx-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
ARM: dts: imx6ull: Add chargebyte Tarragon support
ARM: dts: imx: Add devicetree for Tolino Vison
ARM: dts: imx6dl-yapp43: Add support for new HW revision of the IOTA board
ARM: dts: imx6dl-yapp4: Remove unneeded status "okay"
ARM: dts: imx6dl-yapp4: Move status to the end of property list
ARM: dts: imx6dl-yapp4: Move phy reset into switch node
ARM: dts: imx28-tx28: add SPDX-License-Identifier
ARM: dts: imx28-ts4600: Convert to use label references
ARM: dts: imx28-evk: Convert to use label references
ARM: dts: imx28-duckbill-2: Include base board
ARM: dts: imx28-duckbill: Convert to use label references
ARM: dts: imx28-cfa10036: Convert to use label references
ARM: dts: imx28-apx4devkit: Convert to use label references
ARM: dts: imx28-m28/sps1: Convert to use label references
ARM: dts: imx28-apf28: Convert to use label references
ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815
ARM: dts: imx7d-remarkable2: Enable the cyttsp5
ARM: dts: imx6dl-yapp4: Use reset-gpios property name
ARM: dts: imx6ul-prti6g: configure ethernet reference clock parent
ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL
...
Link: https://lore.kernel.org/r/20230408101928.280271-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX dt-bindings update for 6.4:
- Add vendor prefix for chargebyte.
- A bunch of new board compatibles: Tolino Vision, Toradex Apalis,
chargebyte Tarragon, i.MX8M Plus based boards from DH electronics
and Data Modul, etc.
- A series from Marek Vasut to improve blk-ctrl bindings.
* tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examples
dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examples
dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3
dt-bindings: arm: fsl: add compatible string for Tolino Vision
dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and Pegasus+
dt-bindings: arm: fsl: Add colibri-imx8x carrier boards
dt-bindings: soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and example
dt-bindings: soc: imx8mp-media-blk-ctrl: Align block controller example name
dt-bindings: arm: fsl: Fix copy-paste error in comment
dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
Some devices will include battery status usages in the HID descriptor
but we won't see that battery data for one reason or another. For example,
AES sensors won't send battery data unless an AES pen is in proximity.
If a user does not have an AES pen but instead only interacts with the
AES touchscreen with their fingers then there is no need for us to create
a battery object. Similarly, if a family of peripherals shares the same
HID descriptor between wired-only and wireless-capable SKUs, users of the
former may never see a battery event and will not want a power_supply
object created.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217062
Link: https://gitlab.gnome.org/GNOME/gnome-control-center/-/issues/2354
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rather than creating batteries as part of the initial device probe, let's
make the process lazy. This gives us the opportunity to prevent batteries
from being created in situations where they are unnecessary.
There are two cases in particular where batteries are being unnecessarily
created at initialization. These are AES sensors (for which we don't know
any battery status information until a battery-powered pen actually comes
into prox) peripheral tablets which share HID descriptors between the
wired-only and wireless-capable SKUs of a family of devices.
This patch will delay battery initialization of the former until a pen
actually comes into prox. It will delay battery initialization of the
latter until either a pen comes into prox or a "heartbeat" packet is
processed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217062
Link: https://gitlab.gnome.org/GNOME/gnome-control-center/-/issues/2354
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
With KCSAN enabled, even empty inline stubs can be out-of-lined.
Force the context_tracking_guest_exit() stub inline.
Fixes the following warnings:
vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x1be: call to context_tracking_guest_exit() leaves .noinstr.text section
vmlinux.o: warning: objtool: svm_vcpu_enter_exit+0x85: call to context_tracking_guest_exit() leaves .noinstr.text section
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/dc93f45abdec90c171108b4b590b7fff5790963c.1681320026.git.jpoimboe@kernel.org
Commit 468af56a7b ("objtool: Support addition to set CFA base") was
added as a preparatory patch for arm64 support, but that support never
came. It triggers a false positive warning on x86, so just revert it
for now.
Fixes the following warning:
vmlinux.o: warning: objtool: cdce925_regmap_i2c_write+0xdb: stack state mismatch: cfa1=4+120 cfa2=5+40
Fixes: 468af56a7b ("objtool: Support addition to set CFA base")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/oe-kbuild-all/202304080538.j5G6h1AB-lkp@intel.com/
commit e050e3f0a7 ("perf: Fix broken interrupt rate throttling")
introduces a change in throttling threshold judgment. Before this,
compare hwc->interrupts and max_samples_per_tick, then increase
hwc->interrupts by 1, but this commit reverses order of these two
behaviors, causing the semantics of max_samples_per_tick to change.
In literal sense of "max_samples_per_tick", if hwc->interrupts ==
max_samples_per_tick, it should not be throttled, therefore, the judgment
condition should be changed to "hwc->interrupts > max_samples_per_tick".
In fact, this may cause the hardlockup to fail, The minimum value of
max_samples_per_tick may be 1, in this case, the return value of
__perf_event_account_interrupt function is 1.
As a result, nmi_watchdog gets throttled, which would stop PMU (Use x86
architecture as an example, see x86_pmu_handle_irq).
Fixes: e050e3f0a7 ("perf: Fix broken interrupt rate throttling")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230227023508.102230-1-yangjihong1@huawei.com
'Unknown kernel command line parameters "nokaslr", will be passed to
user space' message is noticed in the dmesg when nokaslr is passed to
the kernel commandline on ARM64 platform. This is because nokaslr param
is handled by early cpufeature detection infrastructure and the parameter
is never consumed by a kernel param handler. Fix this warning by
providing a dummy kernel param handler for nokaslr.
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Link: https://lore.kernel.org/r/20230412043258.397455-1-quic_pkondeti@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
RISC-V Devicetrees for v6.4
Microchip:
A "fix" for the system controller's regs on PolarFire SoC, adding a
missing reg property.
The patch had been sitting there for months and I only re-found it
recently, so you can guess how much of a "fix" it actually is. It'll
become needed when the system controller's QSPI gets added in the future,
but at present there's no urgency as the driver can handle both the
current and "fixed" versions.
StarFive:
Basic support for the JH7110 & the associated first-party dev board, the
VisionFive v2 (in two forms). There's a bunch of dt-bindings required
for this too, all of which have had input from the DT folk. There's
enough in this tag to boot to a console w/ an initramfs but little more.
The SoC supports some of the "new" bit manipulation instructions, which
is a good test for the recently added Zbb support in the kernel.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
riscv: dts: starfive: Add StarFive JH7110 pin function definitions
riscv: dts: starfive: Add initial StarFive JH7110 device tree
dt-bindings: riscv: Add SiFive S7 compatible
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
riscv: dts: microchip: fix the mpfs' mailbox regs
riscv: dts: microchip: add mpfs specific macb reset support
Link: https://lore.kernel.org/r/20230406-shank-impromptu-3d483bbc249f@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Device tree changes for v6.4-rc1
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
* tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add vccmq on Jetson TX2
arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin
arm64: tegra: Audio codec support on Jetson AGX Orin
arm64: tegra: Support Jetson Orin NX reference platform
arm64: tegra: Support Jetson Orin NX
dt-bindings: tegra: Document Jetson Orin NX reference platform
dt-bindings: tegra: Document Jetson Orin NX
arm64: tegra: Add DSU PMUs for Tegra234
arm64: tegra: Drop serial clock-names and reset-names
Link: https://lore.kernel.org/r/20230406124804.970394-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Device tree changes for v6.4-rc1
There are several fixes and cleanups here for some of the older Tegra
consumer devices.
* tag 'tegra-for-6.4-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra30: Use cpu* labels
ARM: tegra30: peripherals: Add 266.5MHz nodes
ARM: tegra: asus-tf101: Fix accelerometer mount matrix
ARM: tegra: transformers: Bind RT5631 sound nodes
ARM: tegra: transformers: Update WM8903 sound nodes
Link: https://lore.kernel.org/r/20230406124804.970394-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: Changes for v6.4-rc1
This is a single patch that drops unneeded quotes from various Tegra-
related device tree bindings.
* tag 'tegra-for-6.4-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: nvidia: Drop unneeded quotes
Link: https://lore.kernel.org/r/20230406124804.970394-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
ARM: dts: exynos: add mmc aliases
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
ARM: dts: exynos: fix MCT compatible in Universal C210
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250
ARM: dts: exynos: drop unused samsung,camclk-out property in Midas
ARM: dts: s5pv210: correct MIPI CSIS clock name
ARM: dts: exynos: correct whitespace in Midas
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: exynos: add ports to TC358764 bridge on Arndale
ARM: dts: exynos: drop fake align STMPE properties in P4 Note
ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note
Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge a quirk to force StorageD3Enable on AMD Picasso systems (Mario
Limonciello).
* acpi-x86:
ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable
Samsung DTS ARM64 changes for v6.4
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add mmc aliases
arm64: dts: exynos: drop mshc aliases
arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC
arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
