[ Upstream commit a7b8d60b37 ]
According to the document of napi, there is no rx process when the
budget is 0. Therefore, r8152_poll() has to return 0 directly when the
budget is equal to 0.
Fixes: d2187f8e44 ("r8152: divide the tx and rx bottom functions")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4c7981075 ]
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid NULL pointer dereference.
Fixes: 7aab747e55 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51fe0a4705 ]
rules is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rules to avoid OOB writing or NULL pointer dereference.
Fixes: 90b509b39a ("net: mvpp2: cls: Add Classification offload support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac28b1ec61 ]
I got the below warning when do fuzzing test:
unregister_netdevice: waiting for bond0 to become free. Usage count = 2
It can be repoduced via:
ip link add bond0 type bond
sysctl -w net.ipv4.conf.bond0.promote_secondaries=1
ip addr add 4.117.174.103/0 scope 0x40 dev bond0
ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0
ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0
ip addr del 4.117.174.103/0 scope 0x40 dev bond0
ip link delete bond0 type bond
In this reproduction test case, an incorrect 'last_prim' is found in
__inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40)
is lost. The memory of the secondary address is leaked and the reference of
in_device and net_device is leaked.
Fix this problem:
Look for 'last_prim' starting at location of the deleted IP and inserting
the promoted IP into the location of 'last_prim'.
Fixes: 0ff60a4567 ("[IPV4]: Fix secondary IP addresses after promotion")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43cdaa1567 ]
Many i.MX8M SoCs use same 1443X/1416X PLL, such as i.MX8MM,
i.MX8MN and later i.MX8M SoCs, moving these PLL definitions
to pll14xx driver can save a lot of duplicated code on each
platform.
Meanwhile, no need to define PLL clock structure for every
module which uses same type of PLL, e.g., audio/video/dram use
1443X PLL, arm/gpu/vpu/sys use 1416X PLL, define 2 PLL clock
structure for each group is enough.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of: 72d00e560d ("clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f236433064 ]
Some usb hubs will negotiate DisplayPort Alt mode with the device
but will then negotiate a data role swap after entering the alt
mode. The data role swap causes the device to unregister all alt
modes, however the usb hub will still send Attention messages
even after failing to reregister the Alt Mode. type_altmode_attention
currently does not verify whether or not a device's altmode partner
exists, which results in a NULL pointer error when dereferencing
the typec_altmode and typec_altmode_ops belonging to the altmode
partner.
Verify the presence of a device's altmode partner before sending
the Attention message to the Alt Mode driver.
Fixes: 8a37d87d72 ("usb: typec: Bus type for alternate modes")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95b4d51c96 ]
Refactor tcpm_handle_vdm_request and its tcpm_pd_svdm helper function so
that reporting the results of the vdm to the altmode-driver is separated
out into a clear separate step inside tcpm_handle_vdm_request, instead
of being scattered over various places inside the tcpm_pd_svdm helper.
This is a preparation patch for fixing an AB BA lock inversion between the
tcpm code and some altmode drivers.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200724174702.61754-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f236433064 ("usb: typec: bus: verify partner exists in typec_altmode_attention")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8afe9a3548 ]
Refactor the tcpm_handle_vdm_request payload handling by doing the
endianness conversion only once directly inside tcpm_handle_vdm_request
itself instead of doing it multiple times inside various helper functions
called by tcpm_handle_vdm_request.
This is a preparation patch for some further refactoring to fix an AB BA
lock inversion between the tcpm code and some altmode drivers.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200724174702.61754-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f236433064 ("usb: typec: bus: verify partner exists in typec_altmode_attention")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9bf63282ea upstream.
The PERF_RECORD_ATTR is used for a pipe mode to describe an event with
attribute and IDs. The ID table comes after the attr and it calculate
size of the table using the total record size and the attr size.
n_ids = (total_record_size - end_of_the_attr_field) / sizeof(u64)
This is fine for most use cases, but sometimes it saves the pipe output
in a file and then process it later. And it becomes a problem if there
is a change in attr size between the record and report.
$ perf record -o- > perf-pipe.data # old version
$ perf report -i- < perf-pipe.data # new version
For example, if the attr size is 128 and it has 4 IDs, then it would
save them in 168 byte like below:
8 byte: perf event header { .type = PERF_RECORD_ATTR, .size = 168 },
128 byte: perf event attr { .size = 128, ... },
32 byte: event IDs [] = { 1234, 1235, 1236, 1237 },
But when report later, it thinks the attr size is 136 then it only read
the last 3 entries as ID.
8 byte: perf event header { .type = PERF_RECORD_ATTR, .size = 168 },
136 byte: perf event attr { .size = 136, ... },
24 byte: event IDs [] = { 1235, 1236, 1237 }, // 1234 is missing
So it should use the recorded version of the attr. The attr has the
size field already then it should honor the size when reading data.
Fixes: 2c46dbb517 ("perf: Convert perf header attrs into attr events")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230825152552.112913-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d167aa76dc upstream.
The function btrfs_validate_super() should verify the fsid in the provided
superblock argument. Because, all its callers expect it to do that.
Such as in the following stack:
write_all_supers()
sb = fs_info->super_for_commit;
btrfs_validate_write_super(.., sb)
btrfs_validate_super(.., sb, ..)
scrub_one_super()
btrfs_validate_super(.., sb, ..)
And
check_dev_super()
btrfs_validate_super(.., sb, ..)
However, it currently verifies the fs_info::super_copy::fsid instead,
which is not correct. Fix this using the correct fsid in the superblock
argument.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4490e803e1 upstream.
When joining a transaction with TRANS_JOIN_NOSTART, if we don't find a
running transaction we end up creating one. This goes against the purpose
of TRANS_JOIN_NOSTART which is to join a running transaction if its state
is at or below the state TRANS_STATE_COMMIT_START, otherwise return an
-ENOENT error and don't start a new transaction. So fix this to not create
a new transaction if there's no running transaction at or below that
state.
CC: stable@vger.kernel.org # 4.14+
Fixes: a6d155d2e3 ("Btrfs: fix deadlock between fiemap and transaction commits")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8bd342d50 upstream.
During our debugging of glusterfs, we found an Assertion failed error:
inode_lookup >= nlookup, which was caused by the nlookup value in the
kernel being greater than that in the FUSE file system.
The issue was introduced by fuse_direntplus_link, where in the function,
fuse_iget increments nlookup, and if d_splice_alias returns failure,
fuse_direntplus_link returns failure without decrementing nlookup
https://github.com/gluster/glusterfs/pull/4081
Signed-off-by: ruanmeisi <ruan.meisi@zte.com.cn>
Fixes: 0b05b18381 ("fuse: implement NFS-like readdirplus support")
Cc: <stable@vger.kernel.org> # v3.9
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 674d9591a3 ]
When sfp is absent or unidentified, the port type should be
displayed as PORT_OTHERS, rather than PORT_FIBRE.
Fixes: 88d10bd6f7 ("net: hns3: add support for multiple media type")
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4f8a78031 ]
The opt_num field is controlled by user mode and is not currently
validated inside the kernel. An attacker can take advantage of this to
trigger an OOB read and potentially leak information.
BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
Read of size 2 at addr ffff88804bc64272 by task poc/6431
CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1
Call Trace:
nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281
nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47
expr_call_ops_eval net/netfilter/nf_tables_core.c:214
nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264
nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23
[..]
Also add validation to genre, subtype and version fields.
Fixes: 11eeef41d5 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6319685bdc ]
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igb devices can use as low as 64 descriptors.
This change will unify igb with other drivers.
Based on commit 7b1be1987c ("e1000e: lower ring minimum size to 64")
Fixes: 9d5c824399 ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8360717524 ]
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igbvf devices can use as low as 64 descriptors.
This change will unify igbvf with other drivers.
Based on commit 7b1be1987c ("e1000e: lower ring minimum size to 64")
Fixes: d4e0fe01a3 ("igbvf: add new driver to support 82576 virtual functions")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5aa4827971 ]
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igc devices can use as low as 64 descriptors.
This change will unify igc with other drivers.
Based on commit 7b1be1987c ("e1000e: lower ring minimum size to 64")
Fixes: 0507ef8a03 ("igc: Add transmit and receive fastpath and interrupt handlers")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b192812905 ]
As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be
read locklessly by unix_dgram_sendmsg().
Let's use READ_ONCE() for sk_err as well.
Note that the writer side is marked by commit cc04410af7 ("af_unix:
annotate lockless accesses to sk->sk_err").
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f31867d0d9 ]
The existing code incorrectly casted a negative value (the result of a
subtraction) to an unsigned value without checking. For example, if
/proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred
lifetime would jump to 4 billion seconds. On my machine and network the
shortest lifetime that avoided underflow was 3 seconds.
Fixes: 76506a986d ("IPv6: fix DESYNC_FACTOR")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 151e887d8f ]
The veth_xmit function returns NETDEV_TX_OK even when packets are dropped.
This behavior leads to incorrect calculations of statistics counts, as
well as things like txq->trans_start updates.
Fixes: e314dbdc1c ("[NET]: Virtual ethernet device driver.")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa09bc40b2 ]
Disable virtualization features on 82580 just as on i210/i211.
This avoids that virt functions are acidentally called on 82850.
Fixes: 55cac248ca ("igb: Add full support for 82580 devices")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4aae44f658 ]
Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.
Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3d2813fb17 ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef23cb5933 ]
While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:
perf_session__delete(ERR_PTR(-1))
Resulting in:
(gdb) run lock contention
Starting program: /root/bin/perf lock contention
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
failed to open perf.data: No such file or directory (try 'perf record' first)
Initializing perf session failed
Program received signal SIGSEGV, Segmentation fault.
0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
2858 if (!session->auxtrace)
(gdb) p session
$1 = (struct perf_session *) 0xffffffffffffffff
(gdb) bt
#0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
#1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
#2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
#3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
#4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
#5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
#6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
#7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
(gdb)
So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.
The same problem was found in 'perf top' after an audit of all
perf_session__new() failure handling.
Fixes: 6ef81c55a2 ("perf session: Return error code for perf_session__new() function on failure")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: https://lore.kernel.org/lkml/ZN4Q2rxxsL08A8rd@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5df8ecfe36 ]
Drop the explicit check on the extended CPUID level in cpu_has_svm(), the
kernel's cached CPUID info will leave the entire SVM leaf unset if said
leaf is not supported by hardware. Prior to using cached information,
the check was needed to avoid false positives due to Intel's rather crazy
CPUID behavior of returning the values of the maximum supported leaf if
the specified leaf is unsupported.
Fixes: 682a810887 ("x86/kvm/svm: Simplify cpu_has_svm()")
Link: https://lore.kernel.org/r/20230721201859.2307736-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 979e9c9fc9 ]
In 616b14b47a ("perf build: Conditionally define NDEBUG") we
started using NDEBUG=1 when DEBUG=1 isn't present, so code that is
enclosed with assert() is not called.
In dd317df072 ("perf build: Make binutil libraries opt in") we
stopped linking against binutils-devel, for licensing reasons.
Recently people asked me why annotation of BPF programs wasn't working,
i.e. this:
$ perf annotate bpf_prog_5280546344e3f45c_kfree_skb
was returning:
case SYMBOL_ANNOTATE_ERRNO__NO_LIBOPCODES_FOR_BPF:
scnprintf(buf, buflen, "Please link with binutils's libopcode to enable BPF annotation");
This was on a fedora rpm, so its new enough that I had to try to test by
rebuilding using BUILD_NONDISTRO=1, only to get it segfaulting on me.
This combination made this libopcode function not to be called:
assert(bfd_check_format(bfdf, bfd_object));
Changing it to:
if (!bfd_check_format(bfdf, bfd_object))
abort();
Made it work, looking at this "check" function made me realize it
changes the 'bfdf' internal state, i.e. we better call it.
So stop using assert() on it, just call it and abort if it fails.
Probably it is better to propagate the error, etc, but it seems it is
unlikely to fail from the usage done so far and we really need to stop
using libopcodes, so do the quick fix above and move on.
With it we have BPF annotation back working when built with
BUILD_NONDISTRO=1:
⬢[acme@toolbox perf-tools-next]$ perf annotate --stdio2 bpf_prog_5280546344e3f45c_kfree_skb | head
No kallsyms or vmlinux with build-id 939bc71a1a51cdc434e60af93c7e734f7d5c0e7e was found
Samples: 12 of event 'cpu-clock:ppp', 4000 Hz, Event count (approx.): 3000000, [percent: local period]
bpf_prog_5280546344e3f45c_kfree_skb() bpf_prog_5280546344e3f45c_kfree_skb
Percent int kfree_skb(struct trace_event_raw_kfree_skb *args) {
nop
33.33 xchg %ax,%ax
push %rbp
mov %rsp,%rbp
sub $0x180,%rsp
push %rbx
push %r13
⬢[acme@toolbox perf-tools-next]$
Fixes: 6987561c9e ("perf annotate: Enable annotation of BPF programs")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mohamed Mahmoud <mmahmoud@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/lkml/ZMrMzoQBe0yqMek1@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 96562c45af upstream.
It is an almost improbable error case but when page allocating loop in
nfs4_get_device_info() fails then we should only free the already
allocated pages, as __free_page() can't deal with NULL arguments.
Found by Linux Verification Center (linuxtesting.org).
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 358ad816e5 upstream.
Older PA-RISC machines have LEDs which show the disk- and LAN-activity.
The computation is done in software and takes quite some time, e.g. on a
J6500 this may take up to 60% time of one CPU if the machine is loaded
via network traffic.
Since most people don't care about the LEDs, start with LEDs disabled and
just show a CPU heartbeat LED. The disk and LAN LEDs can be turned on
manually via /proc/pdc/led.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
