commit a2187431c395cdfbf144e3536f25468c64fc7cfa upstream.
Commit 985b67cd8639 ("ext4: filesystems without casefold feature cannot
be mounted with siphash") properly rejects volumes where
s_def_hash_version is set to DX_HASH_SIPHASH, but the check and the
error message should not look into casefold setup - a filesystem should
never have DX_HASH_SIPHASH as the default hash. Fix it and, since we
are there, move the check to ext4_hash_info_init.
Fixes:985b67cd8639 ("ext4: filesystems without casefold feature cannot
be mounted with siphash")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://patch.msgid.link/87jzg1en6j.fsf_-_@mailhost.krisman.be
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In scmi_devm_notifier_unregister(), the notifier-block argument was ignored
and never passed to devres_release(). As a result, the function always
returned -ENOENT and failed to unregister the notifier.
Drivers that depend on this helper for teardown could therefore hit
unexpected failures, including kernel panics.
Commit 264a2c520628 ("firmware: arm_scmi: Simplify scmi_devm_notifier_unregister")
removed the faulty code path during refactoring and hence this fix is not
required upstream.
Cc: <stable@vger.kernel.org> # 5.15.x, 6.1.x, and 6.6.x
Fixes: 5ad3d1cf7d ("firmware: arm_scmi: Introduce new devres notification ops")
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Amitai Gottlieb <amitaig@hailo.ai>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7346e7a058a2 ("pwm: stm32: Always do lazy disabling") triggered a
regression where PWM polarity changes could be ignored.
stm32_pwm_set_polarity() was skipped due to a mismatch between the
cached pwm->state.polarity and the actual hardware state, leaving the
hardware polarity unchanged.
Fixes: 7edf736920 ("pwm: Add driver for STM32 plaftorm")
Cc: stable@vger.kernel.org # <= 6.12
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Co-developed-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
commit cbefe2ffa7784525ec5d008ba87c7add19ec631a upstream.
If the ptp_rate recorded earlier in the driver happens to be 0, this
bogus value will propagate up to EST configuration, where it will
trigger a division by 0.
Prevent this division by 0 by adding the corresponding check and error
code.
Suggested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Fixes: 8572aec3d0 ("net: stmmac: Add basic EST support for XGMAC")
Link: https://patch.msgid.link/20250529-stmmac_tstamp_div-v4-2-d73340a794d5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ The context change is due to the commit c3f3b97238f6
("net: stmmac: Refactor EST implementation")
which is irrelevant to the logic of this patch. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5326ab737a47278dbd16ed3ee7380b26c7056ddd upstream.
According to section 5.3.6.2 (Multiport Device Operation) of the virtio
spec(version 1.2) a control buffer with the event VIRTIO_CONSOLE_RESIZE
is followed by a virtio_console_resize struct containing cols then rows.
The kernel implements this the wrong way around (rows then cols) resulting
in the two values being swapped.
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Message-Id: <20250324144300.905535-1-maxbr@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Filip Hejsek <filip.hejsek@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cf298c01b7fdb08eef5b6b26d0fe98d48134d72 upstream.
damon_test_update_monitoring_result() is assuming all dynamic memory
allocation in it will succeed. Those are indeed likely in the real use
cases since those allocations are too small to fail, but theoretically
those could fail. In the case, inappropriate memory access can happen.
Fix it by appropriately cleanup pre-allocated memory and skip the
execution of the remaining tests in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-12-sj@kernel.org
Fixes: f4c978b659 ("mm/damon/core-test: add a test for damon_update_monitoring_results()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [6.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 915a2453d824a9b6bf724e3f970d86ae1d092a61 upstream.
damon_test_set_attrs() is assuming all dynamic memory allocation in it
will succeed. Those are indeed likely in the real use cases since those
allocations are too small to fail, but theoretically those could fail. In
the case, inappropriate memory access can happen. Fix it by appropriately
cleanup pre-allocated memory and skip the execution of the remaining tests
in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-13-sj@kernel.org
Fixes: aa13779be6 ("mm/damon/core-test: add a test for damon_set_attrs()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f835f4e8c863985f15abd69db033c2f66546094 upstream.
damon_test_ops_registration() is assuming all dynamic memory allocation in
it will succeed. Those are indeed likely in the real use cases since
those allocations are too small to fail, but theoretically those could
fail. In the case, inappropriate memory access can happen. Fix it by
appropriately cleanup pre-allocated memory and skip the execution of the
remaining tests in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-10-sj@kernel.org
Fixes: 4f540f5ab4 ("mm/damon/core-test: add a kunit test case for ops registration")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d14d5671e7c9cc788c5a1edfa94e6f9064275905 upstream.
damon_test_filter_out() is assuming all dynamic memory allocation in it
will succeed. Those are indeed likely in the real use cases since those
allocations are too small to fail, but theoretically those could fail. In
the case, inappropriate memory access can happen. Fix it by appropriately
cleanup pre-allocated memory and skip the execution of the remaining tests
in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-16-sj@kernel.org
Fixes: 26713c8908 ("mm/damon/core-test: add a unit test for __damos_filter_out()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28ab2265e9422ccd81e4beafc0ace90f78de04c4 upstream.
damon_test_new_filter() is assuming all dynamic memory allocation in it
will succeed. Those are indeed likely in the real use cases since those
allocations are too small to fail, but theoretically those could fail. In
the case, inappropriate memory access can happen. Fix it by appropriately
cleanup pre-allocated memory and skip the execution of the remaining tests
in the failure cases.
Link: https://lkml.kernel.org/r/20251101182021.74868-14-sj@kernel.org
Fixes: 2a158e956b ("mm/damon/core-test: add a test for damos_new_filter()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8ce2eb9dfac8743d1c423b86339336a5b6a6069e ]
In rdma-core, the following failures appear.
"
$ ./build/bin/run_tests.py -k device
ssssssss....FF........s
======================================================================
FAIL: test_query_device (tests.test_device.DeviceTest.test_query_device)
Test ibv_query_device()
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/ubuntu/rdma-core/tests/test_device.py", line 63, in
test_query_device
self.verify_device_attr(attr, dev)
File "/home/ubuntu/rdma-core/tests/test_device.py", line 200, in
verify_device_attr
assert attr.sys_image_guid != 0
^^^^^^^^^^^^^^^^^^^^^^^^
AssertionError
======================================================================
FAIL: test_query_device_ex (tests.test_device.DeviceTest.test_query_device_ex)
Test ibv_query_device_ex()
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/ubuntu/rdma-core/tests/test_device.py", line 222, in
test_query_device_ex
self.verify_device_attr(attr_ex.orig_attr, dev)
File "/home/ubuntu/rdma-core/tests/test_device.py", line 200, in
verify_device_attr
assert attr.sys_image_guid != 0
^^^^^^^^^^^^^^^^^^^^^^^^
AssertionError
"
The root cause is: before a net device is set with rxe, this net device
is used to generate a sys_image_guid.
Fixes: 2ac5415022d1 ("RDMA/rxe: Remove the direct link to net_device")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20250302215444.3742072-1-yanjun.zhu@linux.dev
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Tested-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[Shivani: Modified to apply on 6.6.y]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2ac5415022d16d63d912a39a06f32f1f51140261 ]
The similar patch in siw is in the link:
https://git.kernel.org/rdma/rdma/c/16b87037b48889
This problem also occurred in RXE. The following analyze this problem.
In the following Call Traces:
"
BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0 net/core/dev.c:8782
Read of size 4 at addr ffff8880554640b0 by task kworker/1:4/5295
CPU: 1 UID: 0 PID: 5295 Comm: kworker/1:4 Not tainted
6.12.0-rc3-syzkaller-00399-g9197b73fd7bb #0
Hardware name: Google Compute Engine/Google Compute Engine,
BIOS Google 09/13/2024
Workqueue: infiniband ib_cache_event_task
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
dev_get_flags+0x188/0x1d0 net/core/dev.c:8782
rxe_query_port+0x12d/0x260 drivers/infiniband/sw/rxe/rxe_verbs.c:60
__ib_query_port drivers/infiniband/core/device.c:2111 [inline]
ib_query_port+0x168/0x7d0 drivers/infiniband/core/device.c:2143
ib_cache_update+0x1a9/0xb80 drivers/infiniband/core/cache.c:1494
ib_cache_event_task+0xf3/0x1e0 drivers/infiniband/core/cache.c:1568
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
"
1). In the link [1],
"
infiniband syz2: set down
"
This means that on 839.350575, the event ib_cache_event_task was sent andi
queued in ib_wq.
2). In the link [1],
"
team0 (unregistering): Port device team_slave_0 removed
"
It indicates that before 843.251853, the net device should be freed.
3). In the link [1],
"
BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0
"
This means that on 850.559070, this slab-use-after-free problem occurred.
In all, on 839.350575, the event ib_cache_event_task was sent and queued
in ib_wq,
before 843.251853, the net device veth was freed.
on 850.559070, this event was executed, and the mentioned freed net device
was called. Thus, the above call trace occurred.
[1] https://syzkaller.appspot.com/x/log.txt?x=12e7025f980000
Reported-by: syzbot+4b87489410b4efd181bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4b87489410b4efd181bf
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20241220222325.2487767-1-yanjun.zhu@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[Shivani: - exported ib_device_get_netdev() function.
- added ib_device_get_netdev() to ib_verbs.h.]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dad6b97702639fba27a2bd3e986982ad6f0db3a7 upstream.
Backlog NAPI is a per-CPU NAPI struct only (with no device behind it)
used by drivers which don't do NAPI them self, RPS and parts of the
stack which need to avoid recursive deadlocks while processing a packet.
The non-NAPI driver use the CPU local backlog NAPI. If RPS is enabled
then a flow for the skb is computed and based on the flow the skb can be
enqueued on a remote CPU. Scheduling/ raising the softirq (for backlog's
NAPI) on the remote CPU isn't trivial because the softirq is only
scheduled on the local CPU and performed after the hardirq is done.
In order to schedule a softirq on the remote CPU, an IPI is sent to the
remote CPU which schedules the backlog-NAPI on the then local CPU.
On PREEMPT_RT interrupts are force-threaded. The soft interrupts are
raised within the interrupt thread and processed after the interrupt
handler completed still within the context of the interrupt thread. The
softirq is handled in the context where it originated.
With force-threaded interrupts enabled, ksoftirqd is woken up if a
softirq is raised from hardirq context. This is the case if it is raised
from an IPI. Additionally there is a warning on PREEMPT_RT if the
softirq is raised from the idle thread.
This was done for two reasons:
- With threaded interrupts the processing should happen in thread
context (where it originated) and ksoftirqd is the only thread for
this context if raised from hardirq. Using the currently running task
instead would "punish" a random task.
- Once ksoftirqd is active it consumes all further softirqs until it
stops running. This changed recently and is no longer the case.
Instead of keeping the backlog NAPI in ksoftirqd (in force-threaded/
PREEMPT_RT setups) I am proposing NAPI-threads for backlog.
The "proper" setup with threaded-NAPI is not doable because the threads
are not pinned to an individual CPU and can be modified by the user.
Additionally a dummy network device would have to be assigned. Also
CPU-hotplug has to be considered if additional CPUs show up.
All this can be probably done/ solved but the smpboot-threads already
provide this infrastructure.
Sending UDP packets over loopback expects that the packet is processed
within the call. Delaying it by handing it over to the thread hurts
performance. It is not beneficial to the outcome if the context switch
happens immediately after enqueue or after a while to process a few
packets in a batch.
There is no need to always use the thread if the backlog NAPI is
requested on the local CPU. This restores the loopback throuput. The
performance drops mostly to the same value after enabling RPS on the
loopback comparing the IPI and the tread result.
Create NAPI-threads for backlog if request during boot. The thread runs
the inner loop from napi_threaded_poll(), the wait part is different. It
checks for NAPI_STATE_SCHED (the backlog NAPI can not be disabled).
The NAPI threads for backlog are optional, it has to be enabled via the boot
argument "thread_backlog_napi". It is mandatory for PREEMPT_RT to avoid the
wakeup of ksoftirqd from the IPI.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56364c910691f6d10ba88c964c9041b9ab777bd6 upstream.
A NAPI thread is scheduled by first setting NAPI_STATE_SCHED bit. If
successful (the bit was not yet set) then the NAPI_STATE_SCHED_THREADED
is set but only if thread's state is not TASK_INTERRUPTIBLE (is
TASK_RUNNING) followed by task wakeup.
If the task is idle (TASK_INTERRUPTIBLE) then the
NAPI_STATE_SCHED_THREADED bit is not set. The thread is no relying on
the bit but always leaving the wait-loop after returning from schedule()
because there must have been a wakeup.
The smpboot-threads implementation for per-CPU threads requires an
explicit condition and does not support "if we get out of schedule()
then there must be something to do".
Removing this optimisation simplifies the following integration.
Set NAPI_STATE_SCHED_THREADED unconditionally on wakeup and rely on it
in the wait path by removing the `woken' condition.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Wen Yang <wen.yang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0706bfd3ee40923c001c6827b786a309e2a8713 upstream.
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
strlen+0x93/0xa0 lib/string.c:420
__fortify_strlen include/linux/fortify-string.h:268 [inline]
get_kobj_path_length lib/kobject.c:118 [inline]
kobject_get_path+0x3f/0x2a0 lib/kobject.c:158
kobject_uevent_env+0x289/0x1870 lib/kobject_uevent.c:545
ib_register_device drivers/infiniband/core/device.c:1472 [inline]
ib_register_device+0x8cf/0xe00 drivers/infiniband/core/device.c:1393
rxe_register_device+0x275/0x320 drivers/infiniband/sw/rxe/rxe_verbs.c:1552
rxe_net_add+0x8e/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:550
rxe_newlink+0x70/0x190 drivers/infiniband/sw/rxe/rxe.c:225
nldev_newlink+0x3a3/0x680 drivers/infiniband/core/nldev.c:1796
rdma_nl_rcv_msg+0x387/0x6e0 drivers/infiniband/core/netlink.c:195
rdma_nl_rcv_skb.constprop.0.isra.0+0x2e5/0x450
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620
__sys_sendmsg+0x16d/0x220 net/socket.c:2652
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This problem is similar to the problem that the
commit 1d6a9e7449e2 ("RDMA/core: Fix use-after-free when rename device name")
fixes.
The root cause is: the function ib_device_rename() renames the name with
lock. But in the function kobject_uevent(), this name is accessed without
lock protection at the same time.
The solution is to add the lock protection when this name is accessed in
the function kobject_uevent().
Fixes: 779e0bf476 ("RDMA/core: Do not indicate device ready when device enablement fails")
Link: https://patch.msgid.link/r/20250506151008.75701-1-yanjun.zhu@linux.dev
Reported-by: syzbot+e2ce9e275ecc70a30b72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e2ce9e275ecc70a30b72
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Ajay: Modified to apply on v5.10.y-v6.6.y
ib_device_notify_register() not present in v5.10.y-v6.6.y,
so directly added lock for kobject_uevent() ]
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fa05f96fc08dff5e846c2cc283a249c1bf029a1 upstream.
Don't update the LBR MSR intercept bitmaps if they're already up-to-date,
as unconditionally updating the intercepts forces KVM to recalculate the
MSR bitmaps for vmcb02 on every nested VMRUN. The redundant updates are
functionally okay; however, they neuter an optimization in Hyper-V
nested virtualization enlightenments and this manifests as a self-test
failure.
In particular, Hyper-V lets L1 mark "nested enlightenments" as clean, i.e.
tell KVM that no changes were made to the MSR bitmap since the last VMRUN.
The hyperv_svm_test KVM selftest intentionally changes the MSR bitmap
"without telling KVM about it" to verify that KVM honors the clean hint,
correctly fails because KVM notices the changed bitmap anyway:
==== Test Assertion Failure ====
x86/hyperv_svm_test.c:120: vmcb->control.exit_code == 0x081
pid=193558 tid=193558 errno=4 - Interrupted system call
1 0x0000000000411361: assert_on_unhandled_exception at processor.c:659
2 0x0000000000406186: _vcpu_run at kvm_util.c:1699
3 (inlined by) vcpu_run at kvm_util.c:1710
4 0x0000000000401f2a: main at hyperv_svm_test.c:175
5 0x000000000041d0d3: __libc_start_call_main at libc-start.o:?
6 0x000000000041f27c: __libc_start_main_impl at ??:?
7 0x00000000004021a0: _start at ??:?
vmcb->control.exit_code == SVM_EXIT_VMMCALL
Do *not* fix this by skipping svm_hv_vmcb_dirty_nested_enlightenments()
when svm_set_intercept_for_msr() performs a no-op change. changes to
the L0 MSR interception bitmap are only triggered by full CPUID updates
and MSR filter updates, both of which should be rare. Changing
svm_set_intercept_for_msr() risks hiding unintended pessimizations
like this one, and is actually more complex than this change.
Fixes: fbe5e5f030c2 ("KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv()")
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251112013017.1836863-1-yosry.ahmed@linux.dev
[Rewritten commit message based on mailing list discussion. - Paolo]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a4821412cf2c1429fffa07c012dd150f2edf78c upstream.
The current scheme for handling LBRV when nested is used is very
complicated, especially when L1 does not enable LBRV (i.e. does not set
LBR_CTL_ENABLE_MASK).
To avoid copying LBRs between VMCB01 and VMCB02 on every nested
transition, the current implementation switches between using VMCB01 or
VMCB02 as the source of truth for the LBRs while L2 is running. If L2
enables LBR, VMCB02 is used as the source of truth. When L2 disables
LBR, the LBRs are copied to VMCB01 and VMCB01 is used as the source of
truth. This introduces significant complexity, and incorrect behavior in
some cases.
For example, on a nested #VMEXIT, the LBRs are only copied from VMCB02
to VMCB01 if LBRV is enabled in VMCB01. This is because L2's writes to
MSR_IA32_DEBUGCTLMSR to enable LBR are intercepted and propagated to
VMCB01 instead of VMCB02. However, LBRV is only enabled in VMCB02 when
L2 is running.
This means that if L2 enables LBR and exits to L1, the LBRs will not be
propagated from VMCB02 to VMCB01, because LBRV is disabled in VMCB01.
There is no meaningful difference in CPUID rate in L2 when copying LBRs
on every nested transition vs. the current approach, so do the simple
and correct thing and always copy LBRs between VMCB01 and VMCB02 on
nested transitions (when LBRV is disabled by L1). Drop the conditional
LBRs copying in __svm_{enable/disable}_lbrv() as it is now unnecessary.
VMCB02 becomes the only source of truth for LBRs when L2 is running,
regardless of LBRV being enabled by L1, drop svm_get_lbr_vmcb() and use
svm->vmcb directly in its place.
Fixes: 1d5a1b5860 ("KVM: x86: nSVM: correctly virtualize LBR msrs when L2 is running")
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251108004524.1600006-4-yosry.ahmed@linux.dev
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbe5e5f030c22ae717ee422aaab0e00ea84fab5e upstream.
svm_update_lbrv() is called when MSR_IA32_DEBUGCTLMSR is updated, and on
nested transitions where LBRV is used. It checks whether LBRV enablement
needs to be changed in the current VMCB, and if it does, it also
recalculate intercepts to LBR MSRs.
However, there are cases where intercepts need to be updated even when
LBRV enablement doesn't. Example scenario:
- L1 has MSR_IA32_DEBUGCTLMSR cleared.
- L1 runs L2 without LBR_CTL_ENABLE (no LBRV).
- L2 sets DEBUGCTLMSR_LBR in MSR_IA32_DEBUGCTLMSR, svm_update_lbrv()
sets LBR_CTL_ENABLE in VMCB02 and disables intercepts to LBR MSRs.
- L2 exits to L1, svm_update_lbrv() is not called on this transition.
- L1 clears MSR_IA32_DEBUGCTLMSR, svm_update_lbrv() finds that
LBR_CTL_ENABLE is already cleared in VMCB01 and does nothing.
- Intercepts remain disabled, L1 reads to LBR MSRs read the host MSRs.
Fix it by always recalculating intercepts in svm_update_lbrv().
Fixes: 1d5a1b5860 ("KVM: x86: nSVM: correctly virtualize LBR msrs when L2 is running")
Cc: stable@vger.kernel.org
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://patch.msgid.link/20251108004524.1600006-3-yosry.ahmed@linux.dev
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper updating the intercepts for LBR MSRs, similar to the
one introduced upstream by commit 160f143cc131 ("KVM: SVM: Manually
recalc all MSR intercepts on userspace MSR filter change"). The main
difference is that this version uses set_msr_interception(), which has
inverted polarity compared to svm_set_intercept_for_msr().
This is intended to simplify incoming backports. No functional changes
intended.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a5844227e0f030d2af2d85d4aed10c5eca6ca176 ]
Previously a mutex was added to protect the encoder and decoder context
lists from unexpected changes originating from the SCP IP block, causing
the context pointer to go invalid, resulting in a NULL pointer
dereference in the IPI handler.
Turns out on the MT8173, the VPU IPI handler is called from hard IRQ
context. This causes a big warning from the scheduler. This was first
reported downstream on the ChromeOS kernels, but is also reproducible
on mainline using Fluster with the FFmpeg v4l2m2m decoders. Even though
the actual capture format is not supported, the affected code paths
are triggered.
Since this lock just protects the context list and operations on it are
very fast, it should be OK to switch to a spinlock.
Fixes: 6467cda18c9f ("media: mediatek: vcodec: adding lock to protect decoder context list")
Fixes: afaaf3a0f647 ("media: mediatek: vcodec: adding lock to protect encoder context list")
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ adapted file_to_dec_ctx() and file_to_enc_ctx() helper calls to equivalent fh_to_dec_ctx(file->private_data) and fh_to_enc_ctx(file->private_data) pattern ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5d1e54bb4dc6741284a3ed587e994308ddee2f16 ]
Some functions defined in vpu_v4l2.c are never used outside of that
compilation unit. Make them static.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Stable-dep-of: 634c2cd17bd0 ("media: amphion: Remove vpu_vb_is_codecconfig")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9ea16ba6eaf93f25f61855751f71e2e701709ddf ]
By default the amphion decoder will pre-parse 3 frames before starting
to decode the first frame. Alternatively, a block of flush padding data
can be appended to the frame, which will ensure that the decoder can
start decoding immediately after parsing the flush padding data, thus
potentially reducing decoding latency.
This mode was previously only enabled, when the display delay was set to
0. Allow the user to manually toggle the use of that mode via a module
parameter called low_latency, which enables the mode without
changing the display order.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stable-dep-of: 634c2cd17bd0 ("media: amphion: Remove vpu_vb_is_codecconfig")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 29763138830916f46daaa50e83e7f4f907a3236b ]
If an APICv status updated was pended while L2 was active, immediately
refresh vmcs01's controls instead of pending KVM_REQ_APICV_UPDATE as
kvm_vcpu_update_apicv() only calls into vendor code if a change is
necessary.
E.g. if APICv is inhibited, and then activated while L2 is running:
kvm_vcpu_update_apicv()
|
-> __kvm_vcpu_update_apicv()
|
-> apic->apicv_active = true
|
-> vmx_refresh_apicv_exec_ctrl()
|
-> vmx->nested.update_vmcs01_apicv_status = true
|
-> return
Then L2 exits to L1:
__nested_vmx_vmexit()
|
-> kvm_make_request(KVM_REQ_APICV_UPDATE)
vcpu_enter_guest(): KVM_REQ_APICV_UPDATE
-> kvm_vcpu_update_apicv()
|
-> __kvm_vcpu_update_apicv()
|
-> return // because if (apic->apicv_active == activate)
Reported-by: Chao Gao <chao.gao@intel.com>
Closes: https://lore.kernel.org/all/aQ2jmnN8wUYVEawF@intel.com
Fixes: 7c69661e22 ("KVM: nVMX: Defer APICv updates while L2 is active until L1 is active")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
[sean: write changelog]
Link: https://patch.msgid.link/20251205231913.441872-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[ exported vmx_refresh_apicv_exec_ctrl() and added declaration in vmx.h ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 19c286b755072a22a063052f530a6b1fac8a1f63 ]
In some seek stress tests, we are getting IRQ from the G2 decoder where
the dec_bus_int and the dec_e bits are high, meaning the decoder is
still running despite the error.
Fix this by reworking the IRQ handler to only finish the job once we
have reached completion and move the software reset to when our software
watchdog triggers.
This way, we let the hardware continue on errors when it did not self
reset and in worse case scenario the hardware timeout will
automatically stop it. The actual error will be fixed in a follow up
patch.
Fixes: 3385c514ec ("media: hantro: Convert imx8m_vpu_g2_irq to helper")
Cc: stable@vger.kernel.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3eeaee737dcee3c32e256870dbc2687a2a6fe970 ]
HEVC and VP9 are running on the same hardware and share the same
chroma and motion vectors offset constraint.
Create common helpers functions for these computation.
Source and destination buffer height may not be the same because
alignment constraint are different so use destination height to
compute chroma offset because we target this buffer as hardware
output.
To be able to use the helpers in both VP9 HEVC code remove dec_params
and use context->bit_depth instead.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 19c286b75507 ("media: verisilicon: Fix CPU stalls on G2 bus error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 68d05693f8c031257a0822464366e1c2a239a512 ]
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync # avoid CP_UMOUNT_FLAG in last f2fs_checkpoint.ckpt_flags
touch /mnt/f2fs/bar
f2fs_io fsync /mnt/f2fs/bar
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
blockdev --setro /dev/vdd
mount /dev/vdd /mnt/f2fs
mount: /mnt/f2fs: WARNING: source write-protected, mounted read-only.
For the case if we create and fsync a new inode before sudden power-cut,
without norecovery or disable_roll_forward mount option, the following
mount will succeed w/o recovering last fsynced inode.
The problem here is that we only check inode_list list after
find_fsync_dnodes() in f2fs_recover_fsync_data() to find out whether
there is recoverable data in the iamge, but there is a missed case, if
last fsynced inode is not existing in last checkpoint, then, we will
fail to get its inode due to nat of inode node is not existing in last
checkpoint, so the inode won't be linked in inode_list.
Let's detect such case in dyrun mode to fix this issue.
After this change, mount will fail as expected below:
mount: /mnt/f2fs: cannot mount /dev/vdd read-only.
dmesg(1) may have more information after failed mount system call.
demsg:
F2FS-fs (vdd): Need to recover fsync data, but write access unavailable, please try mount w/ disable_roll_forward or norecovery
Cc: stable@kernel.org
Fixes: 6781eabba1 ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[ folio => page ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
