[ Upstream commit eea53c5816 ]
When the first level page table is used for IOVA translation, it only
supports Read-Only and Read-Write permissions. The Write-Only permission
is not supported as the PRESENT bit (implying Read permission) should
always set. When using second level, we still give separate permissions
that allows WriteOnly which seems inconsistent and awkward. We want to
have consistent behavior. After moving to 1st level, we don't want things
to work sometimes, and break if we use 2nd level for the same mappings.
Hence remove this configuration.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320025415.641201-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8ce9ebbec ]
The Access/Dirty bits in the first level page table entry will be set
whenever a page table entry was used for address translation or write
permission was successfully translated. This is always true when using
the first-level page table for kernel IOVA. Instead of wasting hardware
cycles to update the certain bits, it's better to set them up at the
beginning.
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210115004202.953965-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c00612d0c ]
The Intel VT-d driver checks wrong register to report snoop capablility
when using first level page table for GPA to HPA translation. This might
lead the IOMMU driver to say that it supports snooping control, but in
reality, it does not. Fix this by always setting PASID-table-entry.PGSNP
whenever a pasid entry is setting up for GPA to HPA translation so that
the IOMMU driver could report snoop capability as long as it runs in the
scalable mode.
Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Suggested-by: Rajesh Sankaran <rajesh.sankaran@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210330021145.13824-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3431c3f660 ]
After the change of patch ("iommu: Switch gather->end to the
inclusive end"), the performace drops from 1600+K IOPS to 1200K in our
kunpeng ARM64 platform.
We find that the range [start1, end1) actually is joint from the range
[end1, end2), but it is considered as disjoint after the change,
so it needs more times of TLB sync, and spends more time on it.
So fix the boundary issue to avoid performance drop.
Fixes: 862c3715de ("iommu: Switch gather->end to the inclusive end")
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1616643504-120688-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d421058c8 ]
The VT-d specification (section 7.6) requires that the value in the
Private Data field of a Page Group Response Descriptor must match
the value in the Private Data field of the respective Page Request
Descriptor.
The private data field of a page group response descriptor is set then
immediately cleared in prq_event_thread(). This breaks the rule defined
by the VT-d specification. Fix it by moving clearing code up.
Fixes: 5b438f4ba3 ("iommu/vt-d: Support page request in scalable mode")
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210320024156.640798-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d392ecd1bc ]
Limiting the scope of the variable vector_ring_chain to the block where it
is used.
Fixes: 424eb834a9 ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca4d4c34ae ]
If the "type_a->nfcid_len" is too large then it would lead to memory
corruption in pn533_target_found_type_a() when we do:
memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len);
Fixes: c3b1e1e8a7 ("NFC: Export NFCID1 from pn533")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 194f64a3ca ]
On RoCE systems, a CM REQ contains a Primary Hop Limit > 1 and Primary
Subnet Local is zero.
In cm_req_handler(), the cm_process_routed_req() function is called. Since
the Primary Subnet Local value is zero in the request, and since this is
RoCE (Primary Local LID is permissive), the following statement will be
executed:
IBA_SET(CM_REQ_PRIMARY_SL, req_msg, wc->sl);
This corrupts SL in req_msg if it was different from zero. In other words,
a request to setup a connection using an SL != zero, will not be honored,
and a connection using SL zero will be created instead.
Fixed by not calling cm_process_routed_req() on RoCE systems, the
cm_process_route_req() is only for IB anyhow.
Fixes: 3971c9f6db ("IB/cm: Add interim support for routed paths")
Link: https://lore.kernel.org/r/1616420132-31005-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac1db7acea ]
Add the missing destroy_workqueue() before return from
tipc_crypto_start() in the error handling case.
Fixes: 1ef6f7c939 ("tipc: add automatic session key exchange")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11d92156f7 ]
The vio bus is a fake bus, which we use on pseries LPARs (guests) to
discover devices provided by the hypervisor. There's no need or sense
in creating the vio bus on bare metal systems.
Which is why commit 4336b93378 ("powerpc/pseries: Make vio and
ibmebus initcalls pseries specific") made the initialisation of the
vio bus only happen in LPARs.
However as a result of that commit we now see errors at boot on bare
metal systems:
Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized.
Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized.
This happens because those drivers are built-in, and are calling
vio_register_driver(). It in turn calls driver_register() with a
reference to vio_bus_type, but we haven't registered vio_bus_type with
the driver core.
Fix it by also guarding vio_register_driver() with a check to see if
we are on pseries.
Fixes: 4336b93378 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78352f73dc ]
Currently the UDP protocol delivers GSO_FRAGLIST packets to
the sockets without the expected segmentation.
This change addresses the issue introducing and maintaining
a couple of new fields to explicitly accept SKB_GSO_UDP_L4
or GSO_FRAGLIST packets. Additionally updates udp_unexpected_gso()
accordingly.
UDP sockets enabling UDP_GRO stil keep accept_udp_fraglist
zeroed.
v1 -> v2:
- use 2 bits instead of a whole GSO bitmask (Willem)
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdb5cc6ab3 ]
The function lan87xx_config_aneg_ext was introduced to configure
LAN95xxA but as well writes to undocumented register of LAN87xx.
This fix prevents that access.
The function lan87xx_config_aneg_ext gets more suitable for the new
behavior name.
Reported-by: Måns Rullgård <mans@mansr.com>
Fixes: 05b35e7eb9 ("smsc95xx: add phylib support")
Signed-off-by: Andre Edich <andre.edich@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66633abd06 ]
After commit 0ebeea8ca8 ("bpf: Restrict bpf_probe_read{, str}() only to
archs where they work"), bpf_probe_read{, str}() functions were no longer
available on MIPS, so there exist some errors when running bpf program:
root@linux:/home/loongson/bcc# python examples/tracing/task_switch.py
bpf: Failed to load program: Invalid argument
[...]
11: (85) call bpf_probe_read#4
unknown func bpf_probe_read#4
[...]
Exception: Failed to load BPF program count_sched: Invalid argument
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE should be restricted to archs
with non-overlapping address ranges, but they can overlap in EVA mode
on MIPS, so select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA in
arch/mips/Kconfig, otherwise the bpf old helper bpf_probe_read() will
not be available.
This is similar with the commit d195b1d1d1 ("powerpc/bpf: Enable
bpf_probe_read{, str}() on powerpc again").
Fixes: 0ebeea8ca8 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fe529449d ]
When compiling the powerpc with the SMP disabled, it shows the issue:
arch/powerpc/kernel/watchdog.c: In function ‘watchdog_smp_panic’:
arch/powerpc/kernel/watchdog.c:177:4: error: implicit declaration of function ‘smp_send_nmi_ipi’; did you mean ‘smp_send_stop’? [-Werror=implicit-function-declaration]
177 | smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000);
| ^~~~~~~~~~~~~~~~
| smp_send_stop
cc1: all warnings being treated as errors
make[2]: *** [scripts/Makefile.build:273: arch/powerpc/kernel/watchdog.o] Error 1
make[1]: *** [scripts/Makefile.build:534: arch/powerpc/kernel] Error 2
make: *** [Makefile:1980: arch/powerpc] Error 2
make: *** Waiting for unfinished jobs....
We found that powerpc used ipi to implement hardlockup watchdog, so the
HAVE_HARDLOCKUP_DETECTOR_ARCH should depend on the SMP.
Fixes: 2104180a53 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210327094900.938555-1-chenhuang5@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adb76a520d ]
The device is got by isert_device_get() with refcount is 1, and is
assigned to isert_conn by
isert_conn->device = device.
When isert_create_qp() failed, device will be freed with
isert_device_put().
Later, the device is used in isert_free_login_buf(isert_conn) by the
isert_conn->device->ib_device statement.
Free the device in the correct order.
Fixes: ae9ea9ed38 ("iser-target: Split some logic in isert_connect_request to routines")
Link: https://lore.kernel.org/r/20210322161325.7491-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c73700806d ]
Initial drop action support missed that drop action can be added to egress
flow tables as well. Add the missing support.
This requires making sure that dest_type isn't set to PORT which in turn
exposes a possibility of passing dst while indicating number of dsts as
zero. Explicitly check for number of dsts and pass the appropriate
pointer.
Fixes: f29de9eee7 ("RDMA/mlx5: Add support for drop action in DV steering")
Link: https://lore.kernel.org/r/20210318135123.680759-1-leon@kernel.org
Reviewed-by: Mark Bloch <markb@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99067c07e8 ]
The call sequence in wm8960_configure_clocking is
ret = wm8960_configure_sysclk();
if (ret >= 0)
goto configure_clock;
....
ret = wm8960_configure_pll();
configure_clock:
...
wm8960_configure_sysclk is called before wm8960_configure_pll, as
there is bitclk relax on both functions, so wm8960_configure_sysclk
always return success, then wm8960_configure_pll() never be called.
With this case:
aplay -Dhw:0,0 -d 5 -r 48000 -f S24_LE -c 2 audio48k24b2c.wav
the required bitclk is 48000 * 24 * 2 = 2304000, bitclk got from
wm8960_configure_sysclk is 3072000, but if go to wm8960_configure_pll.
it can get correct bitclk 2304000.
So bitclk relax condition should be removed in wm8960_configure_sysclk,
then wm8960_configure_pll can be called, and there is also bitclk relax
function in wm8960_configure_pll.
Fixes: 3c01b9ee2a ("ASoC: codec: wm8960: Relax bit clock computation")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1614740862-30196-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 509d36a941 ]
When page size larger than 16KB, arguments "vaddr + size(16KB)" in
"ioremap_page_range(vaddr, vaddr + size,...)" called by
"add_legacy_isa_io" is not page-aligned.
As loongson64 needs at least page size 16KB to get rid of cache alias,
and "vaddr" is 64KB-aligned, and 64KB is largest page size supported,
rounding "size" up to PAGE_SIZE is enough for all page size supported.
Fixes: 6d0068ad15 ("MIPS: Loongson64: Process ISA Node in DeviceTree")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd85125ea8 ]
A System Error (SError, followed by kernel panic) was detected when
trying to print the supported pins in a pinctrl device which supports
multiple pins per register. This change fixes the pcs_pin_dbg_show() in
pinctrl-single driver when bits_per_mux is not zero. In addition move
offset calculation and pin offset in register to common function.
Fixes: 4e7e8017a8 ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20210319152133.28705-4-hhhawa@amazon.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa6dd211e4 ]
In commit 73f156a6e8 ("inetpeer: get rid of ip_id_count")
I used a very small hash table that could be abused
by patient attackers to reveal sensitive information.
Switch to a dynamic sizing, depending on RAM size.
Typical big hosts will now use 128x more storage (2 MB)
to get a similar increase in security and reduction
of hash collisions.
As a bonus, use of alloc_large_system_hash() spreads
allocated memory among all NUMA nodes.
Fixes: 73f156a6e8 ("inetpeer: get rid of ip_id_count")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7990ccafaa ]
In ima_restore_measurement_list(), hdr[HDR_PCR].data is pointing to a
buffer of type u8, which contains the dumped 32-bit pcr value.
Currently, only the least significant byte is used to restore the pcr
value. We should convert hdr[HDR_PCR].data to a pointer of type u32
before fetching the value to restore the correct pcr value.
Fixes: 47fdee60b4 ("ima: use ima_parse_buf() to parse measurements headers")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05c4e2721d ]
commit ba9196d2e0 ("MIPS: Make DIEI support as a config option")
use CPU_HAS_DIEI to indicate whether di/ei is implemented correctly,
without this patch, "local_irq_disable" from entry.S in 3A1000
(with buggy di/ei) lose protection of commit e97c5b6098 ("MIPS:
Make irqflags.h functions preempt-safe for non-mipsr2 cpus")
Fixes: ba9196d2e0 ("MIPS: Make DIEI support as a config option")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ef1dd9c7e ]
If identical_pvr_fixup() is not inlined, there are two modpost warnings:
WARNING: modpost: vmlinux.o(.text+0x54e8): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:of_get_flat_dt_prop()
The function identical_pvr_fixup() references
the function __init of_get_flat_dt_prop().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of of_get_flat_dt_prop is wrong.
WARNING: modpost: vmlinux.o(.text+0x551c): Section mismatch in reference
from the function identical_pvr_fixup() to the function
.init.text:identify_cpu()
The function identical_pvr_fixup() references
the function __init identify_cpu().
This is often because identical_pvr_fixup lacks a __init
annotation or the annotation of identify_cpu is wrong.
identical_pvr_fixup() calls two functions marked as __init and is only
called by a function marked as __init so it should be marked as __init
as well. At the same time, remove the inline keywork as it is not
necessary to inline this function. The compiler is still free to do so
if it feels it is worthwhile since commit 889b3c1245 ("compiler:
remove CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 14b3d926a2 ("[POWERPC] 4xx: update 440EP(x)/440GR(x) identical PVR issue workaround")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1316
Link: https://lore.kernel.org/r/20210302200829.2680663-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbced1546e ]
If fadump_calculate_reserve_size() is not inlined, there is a modpost
warning:
WARNING: modpost: vmlinux.o(.text+0x5196c): Section mismatch in
reference from the function fadump_calculate_reserve_size() to the
function .init.text:parse_crashkernel()
The function fadump_calculate_reserve_size() references
the function __init parse_crashkernel().
This is often because fadump_calculate_reserve_size lacks a __init
annotation or the annotation of parse_crashkernel is wrong.
fadump_calculate_reserve_size() calls parse_crashkernel(), which is
marked as __init and fadump_calculate_reserve_size() is called from
within fadump_reserve_mem(), which is also marked as __init.
Mark fadump_calculate_reserve_size() as __init to fix the section
mismatch. Additionally, remove the inline keyword as it is not necessary
to inline this function; the compiler is still free to do so if it feels
it is worthwhile since commit 889b3c1245 ("compiler: remove
CONFIG_OPTIMIZE_INLINING entirely").
Fixes: 11550dc0a0 ("powerpc/fadump: reuse crashkernel parameter for fadump memory reservation")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1300
Link: https://lore.kernel.org/r/20210302195013.2626335-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dde7b3f5f2 ]
Adding such anonymous padding fixes the issue with uninitialized portions of
bpf_xdp_set_link_opts when using LIBBPF_DECLARE_OPTS macro with inline field
initialization:
DECLARE_LIBBPF_OPTS(bpf_xdp_set_link_opts, opts, .old_fd = -1);
When such code is compiled in debug mode, compiler is generating code that
leaves padding bytes uninitialized, which triggers error inside libbpf APIs
that do strict zero initialization checks for OPTS structs.
Adding anonymous padding field fixes the issue.
Fixes: bd5ca3ef93 ("libbpf: Add function to set link XDP fd while specifying old program")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210313210920.1959628-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5acd0cfbfb ]
There are two "netif_running" checks in this driver. One is in
"lapbeth_xmit" and the other is in "lapbeth_rcv". They serve to make
sure that the LAPB APIs called in these functions are called before
"lapb_unregister" is called by the "ndo_stop" function.
However, these "netif_running" checks are unreliable, because it's
possible that immediately after "netif_running" returns true, "ndo_stop"
is called (which causes "lapb_unregister" to be called).
This patch adds locking to make sure "lapbeth_xmit" and "lapbeth_rcv" can
reliably check and ensure the netif is running while doing their work.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0c378684b ]
Retry page faults (re-enter the guest) that hit an invalid memslot
instead of treating the memslot as not existing, i.e. handling the
page fault as an MMIO access. When deleting a memslot, SPTEs aren't
zapped and the TLBs aren't flushed until after the memslot has been
marked invalid.
Handling the invalid slot as MMIO means there's a small window where a
page fault could replace a valid SPTE with an MMIO SPTE. The legacy
MMU handles such a scenario cleanly, but the TDP MMU assumes such
behavior is impossible (see the BUG() in __handle_changed_spte()).
There's really no good reason why the legacy MMU should allow such a
scenario, and closing this hole allows for additional cleanups.
Fixes: 2f2fad0897 ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs")
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210225204749.1512652-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f567d6ef86 ]
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
Fixes: 81bb773fae ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3914d88f76 ]
xsk_generic_xmit() allocates a new skb and then queues it for
xmitting. The size of new skb's headroom is desc->len, so it comes
to the driver/device with no reserved headroom and/or tailroom.
Lots of drivers need some headroom (and sometimes tailroom) to
prepend (and/or append) some headers or data, e.g. CPU tags,
device-specific headers/descriptors (LSO, TLS etc.), and if case
of no available space skb_cow_head() will reallocate the skb.
Reallocations are unwanted on fast-path, especially when it comes
to XDP, so generic XSK xmit should reserve the spaces declared in
dev->needed_headroom and dev->needed tailroom to avoid them.
Note on max(NET_SKB_PAD, L1_CACHE_ALIGN(dev->needed_headroom)):
Usually, output functions reserve LL_RESERVED_SPACE(dev), which
consists of dev->hard_header_len + dev->needed_headroom, aligned
by 16.
However, on XSK xmit hard header is already here in the chunk, so
hard_header_len is not needed. But it'd still be better to align
data up to cacheline, while reserving no less than driver requests
for headroom. NET_SKB_PAD here is to double-insure there will be
no reallocations even when the driver advertises no needed_headroom,
but in fact need it (not so rare case).
Fixes: 35fcde7f8d ("xsk: support for Tx")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210218204908.5455-5-alobakin@pm.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72ce11ddfa ]
In null_init, null_add_dev(dev) is called.
In null_add_dev, it calls null_free_zoned_dev(dev) to free dev->zones
via kvfree(dev->zones) in out_cleanup_zone branch and returns err.
Then null_init accept the err code and then calls null_free_dev(dev).
But in null_free_dev(dev), dev->zones is freed again by
null_free_zoned_dev().
My patch set dev->zones to NULL in null_free_zoned_dev() after
kvfree(dev->zones) is called, to avoid the double free.
Fixes: 2984c8684f ("nullb: factor disk parameters")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210426143229.7374-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad789f84c9 ]
The handling of sysrq key can be activated by echoing the key to
/proc/sysrq-trigger or via the magic key sequence typed into a terminal
that is connected to the system in some way (serial, USB or other mean).
In the former case, the handling is done in a user context. In the
latter case, it is likely to be in an interrupt context.
Currently in print_cpu() of kernel/sched/debug.c, sched_debug_lock is
taken with interrupt disabled for the whole duration of the calls to
print_*_stats() and print_rq() which could last for the quite some time
if the information dump happens on the serial console.
If the system has many cpus and the sched_debug_lock is somehow busy
(e.g. parallel sysrq-t), the system may hit a hard lockup panic
depending on the actually serial console implementation of the
system.
The purpose of sched_debug_lock is to serialize the use of the global
cgroup_path[] buffer in print_cpu(). The rests of the printk calls don't
need serialization from sched_debug_lock.
Calling printk() with interrupt disabled can still be problematic if
multiple instances are running. Allocating a stack buffer of PATH_MAX
bytes is not feasible because of the limited size of the kernel stack.
The solution implemented in this patch is to allow only one caller at a
time to use the full size group_path[], while other simultaneous callers
will have to use shorter stack buffers with the possibility of path
name truncation. A "..." suffix will be printed if truncation may have
happened. The cgroup path name is provided for informational purpose
only, so occasional path name truncation should not be a big problem.
Fixes: efe25c2c7b ("sched: Reinstate group names in /proc/sched_debug")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415195426.6677-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
