commit 63f4970a1219b5256e8ea952096c86dab666d312 upstream.
The number of external channels is assumed to be a multiple of 10,
but this is not the case for IQS7222D. As a result, some CRx pins
are wrongly prevented from being assigned to some channels.
Address this problem by explicitly defining the number of external
channels for cases in which the number of external channels is not
equal to the total number of available channels.
Fixes: dd24e202ac ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aGHVf6HkyFZrzTPy@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbc889ab0122366f6cdbe3c28d477c683ebcebc2 upstream.
During the High-Speed Isochronous Audio transfers, xHCI
controller on certain AMD platforms experiences momentary data
loss. This results in Missed Service Errors (MSE) being
generated by the xHCI.
The root cause of the MSE is attributed to the ISOC OUT endpoint
being omitted from scheduling. This can happen when an IN
endpoint with a 64ms service interval either is pre-scheduled
prior to the ISOC OUT endpoint or the interval of the ISOC OUT
endpoint is shorter than that of the IN endpoint. Consequently,
the OUT service is neglected when an IN endpoint with a service
interval exceeding 32ms is scheduled concurrently (every 64ms in
this scenario).
This issue is particularly seen on certain older AMD platforms.
To mitigate this problem, it is recommended to adjust the service
interval of the IN endpoint to not exceed 32ms (interval 8). This
adjustment ensures that the OUT endpoint will not be bypassed,
even if a smaller interval value is utilized.
Cc: stable <stable@kernel.org>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250627144127.3889714-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 38074de35b015df5623f524d6f2b49a0cd395c40 ]
Allow the flexfiles error handling to recognise NFS level errors (as
opposed to RPC level errors) and handle them separately. The main
motivator is the NFSERR_PERM errors that get returned if the NFS client
connects to the data server through a port number that is lower than
1024. In that case, the client should disconnect and retry a READ on a
different data server, or it should retry a WRITE after reconnecting.
Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbe4134ea4bc493239786220bd69cb8a13493190 ]
Export anon_inode_make_secure_inode() to allow KVM guest_memfd to create
anonymous inodes with proper security context. This replaces the current
pattern of calling alloc_anon_inode() followed by
inode_init_security_anon() for creating security context manually.
This change also fixes a security regression in secretmem where the
S_PRIVATE flag was not cleared after alloc_anon_inode(), causing
LSM/SELinux checks to be bypassed for secretmem file descriptors.
As guest_memfd currently resides in the KVM module, we need to export this
symbol for use outside the core kernel. In the future, guest_memfd might be
moved to core-mm, at which point the symbols no longer would have to be
exported. When/if that happens is still unclear.
Fixes: 2bfe15c526 ("mm: create security context for memfd_secret inodes")
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Shivank Garg <shivankg@amd.com>
Link: https://lore.kernel.org/20250620070328.803704-3-shivankg@amd.com
Acked-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 707f853d7fa3ce323a6875487890c213e34d81a0 ]
Helper macro to more easily limit the export of a symbol to a given
list of modules.
Eg:
EXPORT_SYMBOL_GPL_FOR_MODULES(preempt_notifier_inc, "kvm");
will limit the use of said function to kvm.ko, any other module trying
to use this symbol will refure to load (and get modpost build
failures).
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Requested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: cbe4134ea4bc ("fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33b6a1f155d627f5bd80c7485c598ce45428f74f ]
Currently the call_rcu() API does not check whether a callback
pointer is NULL. If NULL is passed, rcu_core() will try to invoke
it, resulting in NULL pointer dereference and a kernel crash.
To prevent this and improve debuggability, this patch adds a check
for NULL and emits a kernel stack trace to help identify a faulty
caller.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fcab2791543924d438e7fa49276d0998b0a069f ]
As reported in [1], a platform firmware update that increased the number
of method parameters and forgot to update a least one of its callers,
caused ACPICA to crash due to use-after-free.
Since this a result of a clear AML issue that arguably cannot be fixed
up by the interpreter (it cannot produce missing data out of thin air),
address it by making ACPICA refuse to evaluate a method if the caller
attempts to pass fewer arguments than expected to it.
Closes: https://github.com/acpica/acpica/issues/1027 [1]
Reported-by: Peter Williams <peter@newton.cx>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Tested-by: Hans de Goede <hansg@kernel.org> # Dell XPS 9640 with BIOS 1.12.0
Link: https://patch.msgid.link/5909446.DvuYhMxLoT@rjwysocki.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8ab68bdb294b09a761e967dad374f2965e1913f ]
The function core_scsi3_decode_spec_i_port(), in its error code path,
unconditionally calls core_scsi3_lunacl_undepend_item() passing the
dest_se_deve pointer, which may be NULL.
This can lead to a NULL pointer dereference if dest_se_deve remains
unset.
SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg
Unable to handle kernel paging request at virtual address dfff800000000012
Call trace:
core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P)
core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod]
core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod]
target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod]
Fix this by adding a NULL check before calling
core_scsi3_lunacl_undepend_item()
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20250612101556.24829-1-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8acfb165a492251a08a22a4fa6497a131e8c2609 ]
The datasheets for all the fan53555 variants (and clones using the same
interface) define so called soft start times, from enabling the regulator
until at least some percentage of the output (i.e. 92% for the rk860x
types) are available.
The regulator framework supports this with the enable_time property
but currently the fan53555 driver does not define enable_times for any
variant.
I ran into a problem with this while testing the new driver for the
Rockchip NPUs (rocket), which does runtime-pm including disabling and
enabling a rk8602 as needed. When reenabling the regulator while running
a load, fatal hangs could be observed while enabling the associated
power-domain, which the regulator supplies.
Experimentally setting the regulator to always-on, made the issue
disappear, leading to the missing delay to let power stabilize.
And as expected, setting the enable-time to a non-zero value
according to the datasheet also resolved the regulator-issue.
The datasheets in nearly all cases only specify "typical" values,
except for the fan53555 type 08. There both a typical and maximum
value are listed - 40uS apart.
For all typical values I've added 100uS to be on the safe side.
Individual details for the relevant regulators below:
- fan53526:
The datasheet for all variants lists a typical value of 150uS, so
make that 250uS with safety margin.
- fan53555:
types 08 and 18 (unsupported) are given a typical enable time of 135uS
but also a maximum of 175uS so use that value. All the other types only
have a typical time in the datasheet of 300uS, so give a bit margin by
setting it to 400uS.
- rk8600 + rk8602:
Datasheet reports a typical value of 260us, so use 360uS to be safe.
- syr82x + syr83x:
All datasheets report typical soft-start values of 300uS for these
regulators, so use 400uS.
- tcs452x:
Datasheet sadly does not report a soft-start time, so I've not set
an enable-time
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250606190418.478633-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab107276607af90b13a5994997e19b7b9731e251 ]
Since termio interface is now obsolete, include/uapi/asm/ioctls.h
has some constant macros referring to "struct termio", this caused
build failure at userspace.
In file included from /usr/include/asm/ioctl.h:12,
from /usr/include/asm/ioctls.h:5,
from tst-ioctls.c:3:
tst-ioctls.c: In function 'get_TCGETA':
tst-ioctls.c:12:10: error: invalid application of 'sizeof' to incomplete type 'struct termio'
12 | return TCGETA;
| ^~~~~~
Even though termios.h provides "struct termio", trying to juggle definitions around to
make it compile could introduce regressions. So better to open code it.
Reported-by: Tulio Magno <tuliom@ascii.art.br>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Closes: https://lore.kernel.org/linuxppc-dev/8734dji5wl.fsf@ascii.art.br/
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250517142237.156665-1-maddy@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33877220b8641b4cde474a4229ea92c0e3637883 ]
On at least an ASRock 990FX Extreme 4 with a VIA VT6330, the devices
have not yet been enabled by the first time ata_acpi_cbl_80wire() is
called. This means that the ata_for_each_dev loop is never entered,
and a 40 wire cable is assumed.
The VIA controller on this board does not report the cable in the PCI
config space, thus having to fall back to ACPI even though no SATA
bridge is present.
The _GTM values are correctly reported by the firmware through ACPI,
which has already set up faster transfer modes, but due to the above
the controller is forced down to a maximum of UDMA/33.
Resolve this by modifying ata_acpi_cbl_80wire() to directly return the
cable type. First, an unknown cable is assumed which preserves the mode
set by the firmware, and then on subsequent calls when the devices have
been enabled, an 80 wire cable is correctly detected.
Since the function now directly returns the cable type, it is renamed
to ata_acpi_cbl_pata_type().
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250519085945.1399466-1-tasos@tasossah.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c267ae2ef349639b4d9ebf00dd28586a82fdbe6 ]
When the DMA mode is changed on the (still real!) SB AWE32 after
playing a stream and closing, the previous DMA setup was still
silently kept, and it can confuse the hardware, resulting in the
unexpected noises. As a workaround, enforce the disablement of DMA
setups when the DMA setup is changed by the kcontrol.
https://bugzilla.kernel.org/show_bug.cgi?id=218185
Link: https://patch.msgid.link/20250610064322.26787-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d319f75ccf7f0927425a7545aa1a22b3eedc189 ]
In error paths, we could unref the submit without calling
drm_sched_entity_push_job(), so msm_job_free() will never get
called. Since drm_sched_job_cleanup() will NULL out the
s_fence, we can use that to detect this case.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/653584/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d231cde7c84359fb18fb268cf6cff03b5bce48ff ]
The res pointer passed to simpledrm_device_release_clocks() and
simpledrm_device_release_regulators() points to an instance of
struct simpledrm_device. No need to upcast from struct drm_device.
The upcast is harmless, as DRM device is the first field in struct
simpledrm_device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 11e8f5fd22 ("drm: Add simpledrm driver")
Cc: <stable@vger.kernel.org> # v5.14+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250407134753.985925-2-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 930bd77ebe3dc23b18aa49e55e6a515d5663d67a ]
UFS core is only scaling the clocks during devfreq scaling and
initialization. But for an optimum power saving, regulators should also be
scaled along with the clocks.
So let's use the OPP framework which supports scaling clocks, regulators,
and performance state using OPP table defined in devicetree. For
accomodating the OPP support, the existing APIs (ufshcd_scale_clks,
ufshcd_is_devfreq_scaling_required and ufshcd_devfreq_scale) are modified
to accept "freq" as an argument which in turn used by the OPP helpers.
The OPP support is added along with the old freq-table based clock scaling
so that the existing platforms work as expected.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 2e083cd80229 ("scsi: ufs: core: Fix clk scaling to be conditional in reset and restore")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fd53da45bbc834b9cfdf707d2f7ebe666667943 ]
When ufshcd_clk_scaling_suspend_work (thread A) running and new command
coming, ufshcd_clk_scaling_start_busy (thread B) may get host_lock after
thread A first time release host_lock. Then thread A second time get
host_lock will set clk_scaling.window_start_t = 0 which scale up clock
abnormal next polling_ms time. Also inlines another
__ufshcd_suspend_clkscaling calls.
Below is racing step:
1 hba->clk_scaling.suspend_work (Thread A)
ufshcd_clk_scaling_suspend_work
2 spin_lock_irqsave(hba->host->host_lock, irq_flags);
3 hba->clk_scaling.is_suspended = true;
4 spin_unlock_irqrestore(hba->host->host_lock, irq_flags);
__ufshcd_suspend_clkscaling
7 spin_lock_irqsave(hba->host->host_lock, flags);
8 hba->clk_scaling.window_start_t = 0;
9 spin_unlock_irqrestore(hba->host->host_lock, flags);
ufshcd_send_command (Thread B)
ufshcd_clk_scaling_start_busy
5 spin_lock_irqsave(hba->host->host_lock, flags);
....
6 spin_unlock_irqrestore(hba->host->host_lock, flags);
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20230831130826.5592-3-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 2e083cd80229 ("scsi: ufs: core: Fix clk scaling to be conditional in reset and restore")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba8dac350faf16afc129ce6303ca4feaf083ccb1 ]
fstest reports a f2fs bug:
#generic/363 42s ... [failed, exit status 1]- output mismatch (see /share/git/fstests/results//generic/363.out.bad)
# --- tests/generic/363.out 2025-01-12 21:57:40.271440542 +0800
# +++ /share/git/fstests/results//generic/363.out.bad 2025-05-19 19:55:58.000000000 +0800
# @@ -1,2 +1,78 @@
# QA output created by 363
# fsx -q -S 0 -e 1 -N 100000
# +READ BAD DATA: offset = 0xd6fb, size = 0xf044, fname = /mnt/f2fs/junk
# +OFFSET GOOD BAD RANGE
# +0x1540d 0x0000 0x2a25 0x0
# +operation# (mod 256) for the bad data may be 37
# +0x1540e 0x0000 0x2527 0x1
# ...
# (Run 'diff -u /share/git/fstests/tests/generic/363.out /share/git/fstests/results//generic/363.out.bad' to see the entire diff)
Ran: generic/363
Failures: generic/363
Failed 1 of 1 tests
The root cause is user can update post-eof page via mmap [1], however, f2fs
missed to zero post-eof page in below operations, so, once it expands i_size,
then it will include dummy data locates previous post-eof page, so during
below operations, we need to zero post-eof page.
Operations which can include dummy data after previous i_size after expanding
i_size:
- write
- mapwrite [1]
- truncate
- fallocate
* preallocate
* zero_range
* insert_range
* collapse_range
- clone_range (doesn’t support in f2fs)
- copy_range (doesn’t support in f2fs)
[1] https://man7.org/linux/man-pages/man2/mmap.2.html 'BUG section'
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fdd89b452c2ea5e2195d6e315bef122769584c9 ]
In a case writing without fallocate(), we can't guarantee it's allocated
in the conventional area for zoned stroage. To make it consistent across
storage devices, we disallow it regardless of storage device types.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: ba8dac350faf ("f2fs: fix to zero post-eof page")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87f3afd366f7c668be0269efda8a89741a3ea6b3 ]
This patch adds to support tracepoint for f2fs_vm_page_mkwrite(),
meanwhile it prints more details for trace_f2fs_filemap_fault().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: ba8dac350faf ("f2fs: fix to zero post-eof page")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f465c148c61e876b6d6eacd8e8e365f2d47758f ]
Initialize DR6 by writing its architectural reset value to avoid
incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads
to a false bus lock detected warning.
The Intel SDM says:
1) Certain debug exceptions may clear bits 0-3 of DR6.
2) BLD induced #DB clears DR6.BLD and any other debug exception
doesn't modify DR6.BLD.
3) RTM induced #DB clears DR6.RTM and any other debug exception
sets DR6.RTM.
To avoid confusion in identifying debug exceptions, debug handlers
should set DR6.BLD and DR6.RTM, and clear other DR6 bits before
returning.
The DR6 architectural reset value 0xFFFF0FF0, already defined as
macro DR6_RESERVED, satisfies these requirements, so just use it to
reinitialize DR6 whenever needed.
Since clear_all_debug_regs() no longer zeros all debug registers,
rename it to initialize_debug_regs() to better reflect its current
behavior.
Since debug_read_clear_dr6() no longer clears DR6, rename it to
debug_read_reset_dr6() to better reflect its current behavior.
Fixes: ebb1064e7c ("x86/traps: Handle #DB for bus lock")
Reported-by: Sohil Mehta <sohil.mehta@intel.com>
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f61c7b3d442bef91dd432d468d08f72eadcc3209 ]
Currently before iterating through valid links we are utilizing
open-coding when checking if vif valid_links is a non-zero value.
Add new macro, for_each_link_data(), which iterates through link_id
and checks if it is set on vif valid_links. If it is a valid link then
access link data for that link id.
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Link: https://patch.msgid.link/20250325213125.1509362-2-muna.sinada@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: d87c3ca0f8f1 ("wifi: mac80211: finish link init before RCU publish")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d6123102e9fbedc8d25bf4731da6d513173e49e ]
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/namei.c:4046
do_filp_open+0x1fa/0x410 fs/namei.c:4073
do_sys_openat2+0x121/0x1c0 fs/open.c:1437
do_sys_open fs/open.c:1452 [inline]
__do_sys_openat fs/open.c:1468 [inline]
__se_sys_openat fs/open.c:1463 [inline]
__x64_sys_openat+0x138/0x170 fs/open.c:1463
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
vhci_release+0xbc/0xd0 drivers/bluetooth/hci_vhci.c:671
__fput+0x44c/0xa70 fs/file_table.c:465
task_work_run+0x1d1/0x260 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x6ad/0x22e0 kernel/exit.c:955
do_group_exit+0x21c/0x2d0 kernel/exit.c:1104
__do_sys_exit_group kernel/exit.c:1115 [inline]
__se_sys_exit_group kernel/exit.c:1113 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1113
x64_sys_call+0x21ba/0x21c0 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88807cb8d800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 88 bytes inside of
freed 1024-byte region [ffff88807cb8d800, ffff88807cb8dc00)
Fixes: bf18c7118c ("Bluetooth: vhci: Free driver_data on file release")
Reported-by: syzbot+2faa4825e556199361f9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f62d64848fc4c7c30cd6
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f2889f5594a2bc4c6a52634c4a51b93e785def5 ]
If we fail to allocate an ordered extent for a COW write we end up leaking
a qgroup data reservation since we called btrfs_qgroup_release_data() but
we didn't call btrfs_qgroup_free_refroot() (which would happen when
running the respective data delayed ref created by ordered extent
completion or when finishing the ordered extent in case an error happened).
So make sure we call btrfs_qgroup_free_refroot() if we fail to allocate an
ordered extent for a COW write.
Fixes: 7dbeaad0af ("btrfs: change timing for qgroup reserved space for ordered extents to fix reserved space leak")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 266b5d02e14f3a0e07414e11f239397de0577a1d ]
When the SMB server reboots and the client immediately accesses the mount
point, a race condition can occur that causes operations to fail with
"Host is down" error.
Reproduction steps:
# Mount SMB share
mount -t cifs //192.168.245.109/TEST /mnt/ -o xxxx
ls /mnt
# Reboot server
ssh root@192.168.245.109 reboot
ssh root@192.168.245.109 /path/to/cifs_server_setup.sh
ssh root@192.168.245.109 systemctl stop firewalld
# Immediate access fails
ls /mnt
ls: cannot access '/mnt': Host is down
# But works if there is a delay
The issue is caused by a race condition between negotiate and reconnect.
The 20-second negotiate timeout mechanism can interfere with the normal
recovery process when both are triggered simultaneously.
ls cifsd
---------------------------------------------------
cifs_getattr
cifs_revalidate_dentry
cifs_get_inode_info
cifs_get_fattr
smb2_query_path_info
smb2_compound_op
SMB2_open_init
smb2_reconnect
cifs_negotiate_protocol
smb2_negotiate
cifs_send_recv
smb_send_rqst
wait_for_response
cifs_demultiplex_thread
cifs_read_from_socket
cifs_readv_from_socket
server_unresponsive
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->mid_state = MID_RETRY_NEEDED
cifs_wake_up_task
cifs_sync_mid_result
// case MID_RETRY_NEEDED
rc = -EAGAIN;
// In smb2_negotiate()
rc = -EHOSTDOWN;
The server_unresponsive() timeout triggers cifs_reconnect(), which aborts
ongoing mid requests and causes the ls command to receive -EAGAIN, leading
to -EHOSTDOWN.
Fix this by introducing a dedicated `neg_start` field to
precisely tracks when the negotiate process begins. The timeout check
now uses this accurate timestamp instead of `lstrp`, ensuring that:
1. Timeout is only triggered after negotiate has actually run for 20s
2. The mechanism doesn't interfere with concurrent recovery processes
3. Uninitialized timestamps (value 0) don't trigger false timeouts
Fixes: 7ccc1465465d ("smb: client: fix hang in wait_for_response() for negproto")
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16ceda2ef683a50cd0783006c0504e1931cd8879 ]
The link status is latched low so that momentary link drops
can be detected. Always double-reading the status defeats this
design feature. Only double read if link was already down
This prevents unnecessary duplicate readings of the link status.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701065016.4140707-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
