[ Upstream commit d7b67dd6f9db7bd2c49b415e901849b182ff0735 ]
Calls to perf_env__insert_bpf_prog_info may fail as a sideband thread
may already have inserted the bpf_prog_info. Such failures may yield
info_linear being freed which then causes use-after-free issues with
the internal bpf_prog_info info struct. Make it so that
perf_env__insert_bpf_prog_info trigger early non-error paths and fix
the use-after-free in perf_event__synthesize_one_bpf_prog. Add proper
return error handling to perf_env__add_bpf_info (that calls
perf_env__insert_bpf_prog_info) and propagate the return value in its
callers.
Closes: https://lore.kernel.org/lkml/CAP-5=fWJQcmUOP7MuCA2ihKnDAHUCOBLkQFEkQES-1ZZTrgf8Q@mail.gmail.com/
Fixes: 03edb7020bb9 ("perf bpf: Fix two memory leakages when calling perf_env__insert_bpf_prog_info()")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250902181713.309797-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdd5a14e660062114bdebaef9ad52adf04970a89 ]
The bridge has three bootstrap pins which are sampled to determine the
frequency of the external reference clock. The driver will also
(over)write that setting. But it seems this is racy after the bridge is
enabled. It was observed that although the driver write the correct
value (by sniffing on the I2C bus), the register has the wrong value.
The datasheet states that the GPIO lines have to be stable for at least
5us after asserting the EN signal. Thus, there seems to be some logic
which samples the GPIO lines and this logic appears to overwrite the
register value which was set by the driver. Waiting 20us after
asserting the EN line resolves this issue.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250821122341.1257286-1-mwalle@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dedf9c93dece441e9a0a4836458bc93677008ddd ]
Clear the error flags after disabling the module to avoid the case when
a flag is set again between flag clear and module disable. And use
SR_CLEAR_MASK to replace hardcoded value for improved readability.
Although fsl_lpspi_reset() was only introduced in commit a15dc3d657
("spi: lpspi: Fix CLK pin becomes low before one transfer"), the
original driver only reset SR in the interrupt handler, making it
vulnerable to the same issue. Therefore the fixes commit is set at the
introduction of the driver.
Fixes: 5314987de5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-4-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 782a7c73078e1301c0c427f21c06377d77dfa541 ]
Commit 6a13044849 ("spi: lpspi: Fix wrong transmission when don't use
CONT") breaks transmissions when CONT is used. The TDIE interrupt should
not be disabled in all cases. If CONT is used and the TX transfer is not
yet completed yet, but the interrupt handler is called because there are
characters to be received, TDIE is replaced with FCIE. When the transfer
is finally completed, SR_TDF is set but the interrupt handler isn't
called again.
Fixes: 6a13044849 ("spi: lpspi: Fix wrong transmission when don't use CONT")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250828-james-nxp-lpspi-v2-1-6262b9aa9be4@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1180c79fbf36e4c02e76ae4658509523437e52a4 ]
The fans controlled by the driver can get stuck at 0 RPM if they are
configured below a 20% duty cycle. The driver tries to avoid this by
enforcing a minimum duty cycle of 20%, but this is done after the fans
are registered with the thermal subsystem. This is too late as the
thermal subsystem can set their current state before the driver is able
to enforce the minimum duty cycle.
Fix by setting the minimum duty cycle before registering the fans with
the thermal subsystem.
Fixes: d7efb2ebc7 ("hwmon: (mlxreg-fan) Extend driver to support multiply cooling devices")
Reported-by: Nikolay Aleksandrov <razor@blackwall.org>
Tested-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250730201715.1111133-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a81f78caa53e0633cf311ca1526377d9bff7479 ]
In the do_validate_mem(), the call to add_interval() does not
handle errors. If kmalloc() fails in add_interval(), it could
result in a null pointer being inserted into the linked list,
leading to illegal memory access when sub_interval() is called
next.
This patch adds an error handling for the add_interval(). If
add_interval() returns an error, the function will return early
with the error code.
Fixes: 7b4884ca88 ("pcmcia: validate late-added resources")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit a3201e3b7c which is
commit 1f02f2044bda1db1fd995bc35961ab075fa7b5a2 upstream.
This commit introduced a regression, however the fix for the regression:
aa5fc4362fac ("drm/amdgpu: fix task hang from failed job submission
during process kill") depends on things not yet present in 6.12.y and
older kernels. Since this commit is more of an optimization, just
revert it for 6.12.y and older stable kernels.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x - 6.12.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f403699c40f0806a707a9a6eed3b8904224021a ]
Using device_find_child() and of_find_device_by_node() to locate
devices could cause an imbalance in the device's reference count.
device_find_child() and of_find_device_by_node() both call
get_device() to increment the reference count of the found device
before returning the pointer. In mtk_drm_get_all_drm_priv(), these
references are never released through put_device(), resulting in
permanent reference count increments. Additionally, the
for_each_child_of_node() iterator fails to release node references in
all code paths. This leaks device node references when loop
termination occurs before reaching MAX_CRTC. These reference count
leaks may prevent device/node resources from being properly released
during driver unbind operations.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Cc: stable@vger.kernel.org
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250812071932.471730-1-make24@iscas.ac.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ebba0960993045787ca00bb0932d83dad98c2e26 ]
According to mtk_drm_kms_init(), the all_drm_private array in each
drm private data stores all drm private data in display path order.
In mtk_drm_get_all_drm_priv(), each element in all_drm_priv should have one
display path private data, such as:
all_drm_priv[CRTC_MAIN] should only have main_path data
all_drm_priv[CRTC_EXT] should only have ext_path data
all_drm_priv[CRTC_THIRD] should only have third_path data
So we need to add the length checking for each display path before
assigning their drm private data into all_drm_priv array.
Then the all_drm_private array in each drm private data needs to be
assigned in their display path order.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: Fei Shao <fshao@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20231004024013.18956-4-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Stable-dep-of: 1f403699c40f ("drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 43f0999af011fba646e015f0bb08b6c3002a0170 ]
Currently, when device mtu is updated, vmxnet3 updates netdev mtu, quiesces
the device and then reactivates it for the ESXi to know about the new mtu.
So, technically the OS stack can start using the new mtu before ESXi knows
about the new mtu.
This can lead to issues for TSO packets which use mss as per the new mtu
configured. This patch fixes this issue by moving the mtu write after
device quiesce.
Cc: stable@vger.kernel.org
Fixes: d1a890fa37 ("net: VMware virtual Ethernet NIC driver: vmxnet3")
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Changes v1-> v2:
Moved MTU write after destroy of rx rings
Link: https://patch.msgid.link/20250515190457.8597-1-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ no WRITE_ONCE() in older trees ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 157ae5ffd76a2857ccb4b7ce40bc5a344ca00395 ]
Fix a potential deadlock bug. Observe that in the mtk-cqdma.c
file, functions like mtk_cqdma_issue_pending() and
mtk_cqdma_free_active_desc() properly acquire the pc lock before the vc
lock when handling pc and vc fields. However, mtk_cqdma_tx_status()
violates this order by first acquiring the vc lock before invoking
mtk_cqdma_find_active_desc(), which subsequently takes the pc lock. This
reversed locking sequence (vc → pc) contradicts the established
pc → vc order and creates deadlock risks.
Fix the issue by moving the vc lock acquisition code from
mtk_cqdma_find_active_desc() to mtk_cqdma_tx_status(). Ensure the pc lock
is acquired before the vc lock in the calling function to maintain correct
locking hierarchy. Note that since mtk_cqdma_find_active_desc() is a
static function with only one caller (mtk_cqdma_tx_status()), this
modification safely eliminates the deadlock possibility without affecting
other components.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency bugs
including deadlocks, data races and atomicity violations.
Fixes: b1f01e48df ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250508073634.3719-1-chenqiuji666@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f063a28002e3350088b4577c5640882bf4ea17ea ]
The threaded IRQ function in this driver is reading the flag twice: once to
lock a mutex and once to unlock it. Even though the code setting the flag
is designed to prevent it, there are subtle cases where the flag could be
true at the mutex_lock stage and false at the mutex_unlock stage. This
results in the mutex not being unlocked, resulting in a deadlock.
Fix it by making the opt3001_irq() code generally more robust, reading the
flag into a variable and using the variable value at both stages.
Fixes: 94a9b7b180 ("iio: light: add support for TI's opt3001 light sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250321-opt3001-irq-fix-v1-1-6c520d851562@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e08e49d986f82c30f42ad0ed43ebbede1e1e3739 ]
When running machines with 64k page size and a 16k nodesize we started
seeing tree log corruption in production. This turned out to be because
we were not writing out dirty blocks sometimes, so this in fact affects
all metadata writes.
When writing out a subpage EB we scan the subpage bitmap for a dirty
range. If the range isn't dirty we do
bit_start++;
to move onto the next bit. The problem is the bitmap is based on the
number of sectors that an EB has. So in this case, we have a 64k
pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4
bits for every node. With a 64k page size we end up with 4 nodes per
page.
To make this easier this is how everything looks
[0 16k 32k 48k ] logical address
[0 4 8 12 ] radix tree offset
[ 64k page ] folio
[ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers
[ | | | | | | | | | | | | | | | | ] bitmap
Now we use all of our addressing based on fs_info->sectorsize_bits, so
as you can see the above our 16k eb->start turns into radix entry 4.
When we find a dirty range for our eb, we correctly do bit_start +=
sectors_per_node, because if we start at bit 0, the next bit for the
next eb is 4, to correspond to eb->start 16k.
However if our range is clean, we will do bit_start++, which will now
put us offset from our radix tree entries.
In our case, assume that the first time we check the bitmap the block is
not dirty, we increment bit_start so now it == 1, and then we loop
around and check again. This time it is dirty, and we go to find that
start using the following equation
start = folio_start + bit_start * fs_info->sectorsize;
so in the case above, eb->start 0 is now dirty, and we calculate start
as
0 + 1 * fs_info->sectorsize = 4096
4096 >> 12 = 1
Now we're looking up the radix tree for 1, and we won't find an eb.
What's worse is now we're using bit_start == 1, so we do bit_start +=
sectors_per_node, which is now 5. If that eb is dirty we will run into
the same thing, we will look at an offset that is not populated in the
radix tree, and now we're skipping the writeout of dirty extent buffers.
The best fix for this is to not use sectorsize_bits to address nodes,
but that's a larger change. Since this is a fs corruption problem fix
it simply by always using sectors_per_node to increment the start bit.
Fixes: c4aec299fa ("btrfs: introduce submit_eb_subpage() to submit a subpage metadata page")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cf761e3dacc6ad5f65a4886d00da1f9681e6805a ]
Commit 7d5ec3d361 ("PCI/MSI: Mask all unused MSI-X entries") introduced a
readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA.
This is correct, however some hardware, like the Sun Neptune chips, the NIU
module, will cause an error and/or fatal trap if any MSIX table entry is
read before the corresponding ENTRY_DATA field is written to.
Add an optional early writel() in msix_prepare_msi_desc().
Fixes: 7d5ec3d361 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fa17ff8e325a657c84be1083f06e54ee7eea82e4 ]
In order to get working interrupts, a low offset value needs to be
configured. The minimum value for it is 20 Celsius, which is what is
configured when there's no lower thermal trip (ie the thermal core
passes -INT_MAX as low trip temperature). However, when the temperature
gets that low and fluctuates around that value it causes an interrupt
storm.
Prevent that interrupt storm by not enabling the low offset interrupt if
the low threshold is the minimum one.
Cc: stable@vger.kernel.org
Fixes: 77354eaef8 ("thermal/drivers/mediatek/lvts_thermal: Don't leave threshold zeroed")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250113-mt8192-lvts-filtered-suspend-fix-v2-3-07a25200c7c6@collabora.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ Adapted interrupt mask definitions ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 40369bfe717e96e26650eeecfa5a6363563df6e4 ]
Driver use devm APIs to manage clk/irq/resources and register the spi
controller, but the legacy remove function will be called first during
device detach and trigger kernel panic. Drop the remove function and use
devm_add_action_or_reset() for driver cleanup to ensure the release
sequence.
Trigger kernel panic on i.MX8MQ by
echo 30bb0000.spi >/sys/bus/platform/drivers/fsl-quadspi/unbind
Cc: stable@vger.kernel.org
Fixes: 8fcb830a00 ("spi: spi-fsl-qspi: use devm_spi_register_controller")
Reported-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Han Xu <han.xu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250326224152.2147099-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b4efccec8d06ceb10a7d34d7b1c449c569d53770 ]
object_err() reports details of an object for further debugging, such as
the freelist pointer, redzone, etc. However, if the pointer is invalid,
attempting to access object metadata can lead to a crash since it does
not point to a valid object.
One known path to the crash is when alloc_consistency_checks()
determines the pointer to the allocated object is invalid because of a
freelist corruption, and calls object_err() to report it. The debug code
should report and handle the corruption gracefully and not crash in the
process.
In case the pointer is NULL or check_valid_pointer() returns false for
the pointer, only print the pointer value and skip accessing metadata.
Fixes: 81819f0fc8 ("SLUB core")
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ef5c4e4dbbfcebaa9b2eca18097b43016727dfe ]
Nouveau has code that when it gets an IRQ with no allowed handler
it disables it to avoid storms.
However with nonstall interrupts, we often disable them from
the drm driver, but still request their emission via the push submission.
Just don't disable nonstall irqs ever in normal operation, the
event handling code will filter them out, and the driver will
just enable/disable them at load time.
This fixes timeouts we've been seeing on/off for a long time,
but they became a lot more noticeable on Blackwell.
This doesn't fix all of them, there is a subsequent fence emission
fix to fix the last few.
Fixes: 3ebd64aa3c ("drm/nouveau/intr: support multiple trees, and explicit interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250829021633.1674524-1-airlied@gmail.com
[ Fix a typo and a minor checkpatch.pl warning; remove "v2" from commit
subject. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
[ File renames + drop r535 changes ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ac4e04d9e378f5aa826c2406ad7871ae1b6a6fb9 ]
When turbo mode is unavailable on a Skylake-X system, executing the
command:
# echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
results in an unchecked MSR access error:
WRMSR to 0x199 (attempted to write 0x0000000100001300).
This issue was reproduced on an OEM (Original Equipment Manufacturer)
system and is not a common problem across all Skylake-X systems.
This error occurs because the MSR 0x199 Turbo Engage Bit (bit 32) is set
when turbo mode is disabled. The issue arises when intel_pstate fails to
detect that turbo mode is disabled. Here intel_pstate relies on
MSR_IA32_MISC_ENABLE bit 38 to determine the status of turbo mode.
However, on this system, bit 38 is not set even when turbo mode is
disabled.
According to the Intel Software Developer's Manual (SDM), the BIOS sets
this bit during platform initialization to enable or disable
opportunistic processor performance operations. Logically, this bit
should be set in such cases. However, the SDM also specifies that "OS
and applications must use CPUID leaf 06H to detect processors with
opportunistic processor performance operations enabled."
Therefore, in addition to checking MSR_IA32_MISC_ENABLE bit 38, verify
that CPUID.06H:EAX[1] is 0 to accurately determine if turbo mode is
disabled.
Fixes: 4521e1a0ce ("cpufreq: intel_pstate: Reflect current no_turbo state correctly")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0940f1a8011fd69be5082015068e0dc31c800c20 ]
The global.turbo_disabled is updated quite often, especially in the
passive mode in which case it is updated every time the scheduler calls
into the driver. However, this is generally not necessary and it adds
MSR read overhead to scheduler code paths (and that particular MSR is
slow to read).
For this reason, make the driver read MSR_IA32_MISC_ENABLE_TURBO_DISABLE
just once at the cpufreq driver registration time and remove all of the
in-flight updates of global.turbo_disabled.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Stable-dep-of: ac4e04d9e378 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 37b6ddba967c601479bea418a7ac6ff16b6232b7 ]
Setting global turbo flag based on CPU 0 P-state limits is problematic
as it limits max P-state request on every CPU on the system just based
on its P-state limits.
There are two cases in which global.turbo_disabled flag is set:
- When the MSR_IA32_MISC_ENABLE_TURBO_DISABLE bit is set to 1
in the MSR MSR_IA32_MISC_ENABLE. This bit can be only changed by
the system BIOS before power up.
- When the max non turbo P-state is same as max turbo P-state for CPU 0.
The second check is not a valid to decide global turbo state based on
the CPU 0. CPU 0 max turbo P-state can be same as max non turbo P-state,
but for other CPUs this may not be true.
There is no guarantee that max P-state limits are same for every CPU. This
is possible that during fusing max P-state for a CPU is constrained. Also
with the Intel Speed Select performance profile, CPU 0 may not be present
in all profiles. In this case the max non turbo and turbo P-state can be
set to the lowest possible P-state by the hardware when switched to
such profile. Since max non turbo and turbo P-state is same,
global.turbo_disabled flag will be set.
Once global.turbo_disabled is set, any scaling max and min frequency
update for any CPU will result in its max P-state constrained to the max
non turbo P-state.
Hence remove the check of max non turbo P-state equal to max turbo P-state
of CPU 0 to set global turbo disabled flag.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: ac4e04d9e378 ("cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit cdfb20e4b3 which is
commit b07f349d1864abe29436f45e3047da2bdd476462 upstream.
There is cadence-qspi ff8d2000.spi: Unbalanced pm_runtime_enable! error
without this revert.
After reverting commit cdfb20e4b3 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 1af6d1696c ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths"),
Unbalanced pm_runtime_enable! error does not appear.
These two commits are backported from upstream commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths").
The commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths")
fix commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance").
The commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance") fix
commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings").
The commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings") fix
commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support").
6.6.y only backport commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths"),
but does not backport commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support")
and commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings").
And the backport of commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
differs with the original patch. So there is Unbalanced pm_runtime_enable error.
If revert the backport for commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths"), there is no error.
If backport commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support") and
commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings"), there
is hang during booting. I didn't find the cause of the hang.
Since commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support") and
commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings") are
not backported, commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths") are not needed.
So revert commits commit cdfb20e4b3 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance") and
commit 1af6d1696c ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths").
Signed-off-by: Jinfeng Wang <jinfeng.wang.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1af6d1696c which is
commit 04a8ff1bc3514808481ddebd454342ad902a3f60 upstream.
There is cadence-qspi ff8d2000.spi: Unbalanced pm_runtime_enable! error
without this revert.
After reverting commit cdfb20e4b3 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 1af6d1696c ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths"),
Unbalanced pm_runtime_enable! error does not appear.
These two commits are backported from upstream commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths").
The commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths")
fix commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance").
The commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance") fix
commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings").
The commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings") fix
commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support").
6.6.y only backport commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths"),
but does not backport commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support")
and commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings").
And the backport of commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
differs with the original patch. So there is Unbalanced pm_runtime_enable error.
If revert the backport for commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths"), there is no error.
If backport commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support") and
commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings"), there
is hang during booting. I didn't find the cause of the hang.
Since commit 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support") and
commit 86401132d7bb ("spi: spi-cadence-quadspi: Fix missing unwind goto warnings") are
not backported, commit b07f349d1864 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance")
and commit 04a8ff1bc351 ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths") are not needed.
So revert commits commit cdfb20e4b3 ("spi: spi-cadence-quadspi: Fix pm runtime unbalance") and
commit 1af6d1696c ("spi: cadence-quadspi: fix cleanup of rx_chan on failure paths").
Signed-off-by: Jinfeng Wang <jinfeng.wang.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90fb7db49c6dbac961c6b8ebfd741141ffbc8545 upstream.
Fix a possible heap overflow in e1000_set_eeprom function by adding
input validation for the requested length of the change in the EEPROM.
In addition, change the variable type from int to size_t for better
code practices and rearrange declarations to RCT.
Cc: stable@vger.kernel.org
Fixes: bc7f75fa97 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Co-developed-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Mikael Wessel <post@mikaelkw.online>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70bccd9855dae56942f2b18a08ba137bb54093a0 upstream.
There can be a NULL pointer dereference bug here. NULL is passed to
__cifs_sfu_make_node without checks, which passes it unchecked to
cifs_strndup_to_utf16, which in turn passes it to
cifs_local_to_utf16_bytes where '*from' is dereferenced, causing a crash.
This patch adds a check for NULL 'src' in cifs_strndup_to_utf16 and
returns NULL early to prevent dereferencing NULL pointer.
Found by Linux Verification Center (linuxtesting.org) with SVACE
Signed-off-by: Makar Semyonov <m.semenov@tssltd.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d77b6ff0ce35a6d0b0b7b9581bc3f76d041d4087 upstream.
batadv_nc_skb_decode_packet() trusts coded_len and checks only against
skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing
payload headroom, and the source skb length is not verified, allowing an
out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination
and source sk_buffs before XORing.
Fixes: 2df5278b02 ("batman-adv: network coding - receive coded packets and decode them")
Cc: stable@vger.kernel.org
Reported-by: Stanislav Fort <disclosure@aisle.com>
Signed-off-by: Stanislav Fort <stanislav.fort@aisle.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9dba9a45c348e8460da97c450cddf70b2056deb3 upstream.
Fix a use-after-free window by correcting the buffer release sequence in
the deferred receive path. The code freed the RQ buffer first and only
then cleared the context pointer under the lock. Concurrent paths (e.g.,
ABTS and the repost path) also inspect and release the same pointer under
the lock, so the old order could lead to double-free/UAF.
Note that the repost path already uses the correct pattern: detach the
pointer under the lock, then free it after dropping the lock. The
deferred path should do the same.
Fixes: 472e146d1c ("scsi: lpfc: Correct upcalling nvmet_fc transport during io done downcall")
Cc: stable@vger.kernel.org
Signed-off-by: John Evans <evans1210144@gmail.com>
Link: https://lore.kernel.org/r/20250828044008.743-1-evans1210144@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87b07a1fbc6b5c23d3b3584ab4288bc9106d3274 upstream.
A new warning in clang [1] points out a couple of places where a hdr
variable is not initialized then passed along to skb_put_data().
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:1894:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
1894 | skb_put_data(skb, &hdr, sizeof(hdr));
| ^~~
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:3386:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
3386 | skb_put_data(skb, &hdr, sizeof(hdr));
| ^~~
Zero initialize these headers as done in other places in the driver when
there is nothing stored in the header.
Cc: stable@vger.kernel.org
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: 00dacf8c22 [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2104
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250715-mt7996-fix-uninit-const-pointer-v1-1-b5d8d11d7b78@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e20450829ca3c1dbc2db536391537c57a40fe0b upstream.
The adapter->chan_stats[] array is initialized in
mwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero out
memory. The array is filled in mwifiex_update_chan_statistics()
and then the user can query the data in mwifiex_cfg80211_dump_survey().
There are two potential issues here. What if the user calls
mwifiex_cfg80211_dump_survey() before the data has been filled in.
Also the mwifiex_update_chan_statistics() function doesn't necessarily
initialize the whole array. Since the array was not initialized at
the start that could result in an information leak.
Also this array is pretty small. It's a maximum of 900 bytes so it's
more appropriate to use kcalloc() instead vmalloc().
Cc: stable@vger.kernel.org
Fixes: bf35443314 ("mwifiex: channel statistics support for mwifiex")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20250815023055.477719-1-rongqianfeng@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
