Commit Graph

1053748 Commits

Author SHA1 Message Date
Haibo Chen
caae64d3e9 gpio: pca953x: use the correct register address when regcache sync during init
[ Upstream commit b8c768ccdd ]

For regcache_sync_region, we need to use pca953x_recalc_addr() to get
the real register address.

Fixes: ec82d1eba3 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:20 +02:00
Haibo Chen
dfb4b67ff4 gpio: pca953x: use the correct range when do regmap sync
[ Upstream commit 2abc17a938 ]

regmap will sync a range of registers, here use the correct range
to make sure the sync do not touch other unexpected registers.

Find on pca9557pw on imx8qxp/dxl evk board, this device support
8 pin, so only need one register(8 bits) to cover all the 8 pins's
property setting. But when sync the output, we find it actually
update two registers, output register and the following register.

Fixes: b765743005 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Fixes: ec82d1eba3 ("gpio: pca953x: Zap ad-hoc reg_output cache")
Fixes: 0f25fda840 ("gpio: pca953x: Zap ad-hoc reg_direction cache")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:20 +02:00
Haibo Chen
9726ed46b9 gpio: pca953x: only use single read/write for No AI mode
[ Upstream commit db8edaa09d ]

For the device use NO AI mode(not support auto address increment),
only use the single read/write when config the regmap.

We meet issue on PCA9557PW on i.MX8QXP/DXL evk board, this device
do not support AI mode, but when do the regmap sync, regmap will
sync 3 byte data to register 1, logically this means write first
data to register 1, write second data to register 2, write third data
to register 3. But this device do not support AI mode, finally, these
three data write only into register 1 one by one. the reault is the
value of register 1 alway equal to the latest data, here is the third
data, no operation happened on register 2 and register 3. This is
not what we expect.

Fixes: 4942723276 ("gpio: pca953x: Perform basic regmap conversion")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:20 +02:00
Wong Vee Khee
e6fc5472b8 net: stmmac: remove redunctant disable xPCS EEE call
[ Upstream commit da791bac10 ]

Disable is done in stmmac_init_eee() on the event of MAC link down.
Since setting enable/disable EEE via ethtool will eventually trigger
a MAC down, removing this redunctant call in stmmac_ethtool.c to avoid
calling xpcs_config_eee() twice.

Fixes: d4aeaed80b ("net: stmmac: trigger PCS EEE to turn off on link down")
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Link: https://lore.kernel.org/r/20220715122402.1017470-1-vee.khee.wong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:20 +02:00
Piotr Skajewski
16f929a5e7 ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero
[ Upstream commit 1e53834ce5 ]

It is possible to disable VFs while the PF driver is processing requests
from the VF driver.  This can result in a panic.

BUG: unable to handle kernel paging request at 000000000000106c
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I      --------- -
Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe]
Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff
01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c
00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a
RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002
RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b
RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006
RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780
R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020
R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80
FS:  0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <IRQ>
 ? ttwu_do_wakeup+0x19/0x140
 ? try_to_wake_up+0x1cd/0x550
 ? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf]
 ixgbe_msix_other+0x17e/0x310 [ixgbe]
 __handle_irq_event_percpu+0x40/0x180
 handle_irq_event_percpu+0x30/0x80
 handle_irq_event+0x36/0x53
 handle_edge_irq+0x82/0x190
 handle_irq+0x1c/0x30
 do_IRQ+0x49/0xd0
 common_interrupt+0xf/0xf

This can be eventually be reproduced with the following script:

while :
do
    echo 63 > /sys/class/net/<devname>/device/sriov_numvfs
    sleep 1
    echo 0 > /sys/class/net/<devname>/device/sriov_numvfs
    sleep 1
done

Add lock when disabling SR-IOV to prevent process VF mailbox communication.

Fixes: d773d13106 ("ixgbe: Fix memory leak when SR-IOV VFs are direct assigned")
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220715214456.2968711-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:20 +02:00
Dawid Lukwinski
893ea2b35b i40e: Fix erroneous adapter reinitialization during recovery process
[ Upstream commit f838a63369 ]

Fix an issue when driver incorrectly detects state
of recovery process and erroneously reinitializes interrupts,
which results in a kernel error and call trace message.

The issue was caused by a combination of two factors:
1. Assuming the EMP reset issued after completing
firmware recovery means the whole recovery process is complete.
2. Erroneous reinitialization of interrupt vector after detecting
the above mentioned EMP reset.

Fixes (1) by changing how recovery state change is detected
and (2) by adjusting the conditional expression to ensure using proper
interrupt reinitialization method, depending on the situation.

Fixes: 4ff0ee1af0 ("i40e: Introduce recovery mode support")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220715214542.2968762-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:20 +02:00
Vladimir Oltean
fad55088ad pinctrl: armada-37xx: use raw spinlocks for regmap to avoid invalid wait context
[ Upstream commit 4546760619 ]

The irqchip->irq_set_type method is called by __irq_set_trigger() under
the desc->lock raw spinlock.

The armada-37xx implementation, armada_37xx_irq_set_type(), uses an MMIO
regmap created by of_syscon_register(), which uses plain spinlocks
(the kind that are sleepable on RT).

Therefore, this is an invalid locking scheme for which we get a kernel
splat stating just that ("[ BUG: Invalid wait context ]"), because the
context in which the plain spinlock may sleep is atomic due to the raw
spinlock. We need to go raw spinlocks all the way.

Make this driver create its own MMIO regmap, with use_raw_spinlock=true,
and stop relying on syscon to provide it.

This patch depends on commit 67021f25d9 ("regmap: teach regmap to use
raw spinlocks if requested in the config").

Cc: <stable@vger.kernel.org> # 5.15+
Fixes: 2f22760539 ("pinctrl: armada-37xx: Add irqchip support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220716233745.1704677-3-vladimir.oltean@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:20 +02:00
Andy Shevchenko
9d674108fe pinctrl: armada-37xx: Convert to use dev_err_probe()
[ Upstream commit 06cb10ea0c ]

It's fine to call dev_err_probe() in ->probe() when error code is known.
Convert the driver to use dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:19 +02:00
Andy Shevchenko
47c9f6bfc2 pinctrl: armada-37xx: Make use of the devm_platform_ioremap_resource()
[ Upstream commit 49bdef5017 ]

Use the devm_platform_ioremap_resource() helper instead of
calling of_address_to_resource() and devm_ioremap_resource()
separately.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:19 +02:00
Andy Shevchenko
2cbb165131 pinctrl: armada-37xx: Use temporary variable for struct device
[ Upstream commit 50cf2ed284 ]

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:19 +02:00
Przemyslaw Patynowski
2918419c06 iavf: Fix handling of dummy receive descriptors
[ Upstream commit a9f49e0060 ]

Fix memory leak caused by not handling dummy receive descriptor properly.
iavf_get_rx_buffer now sets the rx_buffer return value for dummy receive
descriptors. Without this patch, when the hardware writes a dummy
descriptor, iavf would not free the page allocated for the previous receive
buffer. This is an unlikely event but can still happen.

[Jesse: massaged commit message]

Fixes: efa14c3985 ("iavf: allow null RX descriptors")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:19 +02:00
Kuniyuki Iwashima
a77a75a0e7 tcp: Fix data-races around sysctl_tcp_fastopen_blackhole_timeout.
[ Upstream commit 021266ec64 ]

While reading sysctl_tcp_fastopen_blackhole_timeout, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: cf1ef3f071 ("net/tcp_fastopen: Disable active side TFO in certain scenarios")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:19 +02:00
Kuniyuki Iwashima
539d9ab79e tcp: Fix data-races around sysctl_tcp_fastopen.
[ Upstream commit 5a54213318 ]

While reading sysctl_tcp_fastopen, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 2100c8d2d9 ("net-tcp: Fast Open base")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:19 +02:00
Kuniyuki Iwashima
3ae85dc62a tcp: Fix data-races around sysctl_max_syn_backlog.
[ Upstream commit 79539f3474 ]

While reading sysctl_max_syn_backlog, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:19 +02:00
Kuniyuki Iwashima
58d5ea71aa tcp: Fix a data-race around sysctl_tcp_tw_reuse.
[ Upstream commit cbfc649558 ]

While reading sysctl_tcp_tw_reuse, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:18 +02:00
Kuniyuki Iwashima
80d4d0c461 tcp: Fix a data-race around sysctl_tcp_notsent_lowat.
[ Upstream commit 55be873695 ]

While reading sysctl_tcp_notsent_lowat, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: c9bee3b7fd ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:18 +02:00
Kuniyuki Iwashima
e816f80246 tcp: Fix data-races around some timeout sysctl knobs.
[ Upstream commit 39e24435a7 ]

While reading these sysctl knobs, they can be changed concurrently.
Thus, we need to add READ_ONCE() to their readers.

  - tcp_retries1
  - tcp_retries2
  - tcp_orphan_retries
  - tcp_fin_timeout

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:18 +02:00
Kuniyuki Iwashima
f6ce655695 tcp: Fix data-races around sysctl_tcp_reordering.
[ Upstream commit 46778cd16e ]

While reading sysctl_tcp_reordering, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:18 +02:00
Kuniyuki Iwashima
fcf6c6d8ae tcp: Fix data-races around sysctl_tcp_migrate_req.
[ Upstream commit 4177f54589 ]

While reading sysctl_tcp_migrate_req, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: f9ac779f88 ("net: Introduce net.ipv4.tcp_migrate_req.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:18 +02:00
Kuniyuki Iwashima
10a9ba97a4 tcp: Fix data-races around sysctl_tcp_syncookies.
[ Upstream commit f2e383b5bb ]

While reading sysctl_tcp_syncookies, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:18 +02:00
Kuniyuki Iwashima
78522951d7 tcp: Fix data-races around sysctl_tcp_syn(ack)?_retries.
[ Upstream commit 20a3b1c0f6 ]

While reading sysctl_tcp_syn(ack)?_retries, they can be changed
concurrently.  Thus, we need to add READ_ONCE() to their readers.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:18 +02:00
Kuniyuki Iwashima
906beda70c tcp: Fix data-races around keepalive sysctl knobs.
[ Upstream commit f2f316e287 ]

While reading sysctl_tcp_keepalive_(time|probes|intvl), they can be changed
concurrently.  Thus, we need to add READ_ONCE() to their readers.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:17 +02:00
Kuniyuki Iwashima
849450279d igmp: Fix data-races around sysctl_igmp_max_msf.
[ Upstream commit 6ae0f2e553 ]

While reading sysctl_igmp_max_msf, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:17 +02:00
Kuniyuki Iwashima
2a408a4f42 igmp: Fix a data-race around sysctl_igmp_max_memberships.
[ Upstream commit 6305d821e3 ]

While reading sysctl_igmp_max_memberships, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:17 +02:00
Kuniyuki Iwashima
260446eb8e igmp: Fix data-races around sysctl_igmp_llm_reports.
[ Upstream commit f6da2267e7 ]

While reading sysctl_igmp_llm_reports, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

This test can be packed into a helper, so such changes will be in the
follow-up series after net is merged into net-next.

  if (ipv4_is_local_multicast(pmc->multiaddr) &&
      !READ_ONCE(net->ipv4.sysctl_igmp_llm_reports))

Fixes: df2cf4a78e ("IGMP: Inhibit reports for local multicast groups")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:17 +02:00
Tariq Toukan
2e8c830932 net/tls: Fix race in TLS device down flow
[ Upstream commit f08d8c1bb9 ]

Socket destruction flow and tls_device_down function sync against each
other using tls_device_lock and the context refcount, to guarantee the
device resources are freed via tls_dev_del() by the end of
tls_device_down.

In the following unfortunate flow, this won't happen:
- refcount is decreased to zero in tls_device_sk_destruct.
- tls_device_down starts, skips the context as refcount is zero, going
  all the way until it flushes the gc work, and returns without freeing
  the device resources.
- only then, tls_device_queue_ctx_destruction is called, queues the gc
  work and frees the context's device resources.

Solve it by decreasing the refcount in the socket's destruction flow
under the tls_device_lock, for perfect synchronization.  This does not
slow down the common likely destructor flow, in which both the refcount
is decreased and the spinlock is acquired, anyway.

Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:17 +02:00
Junxiao Chang
7c687a893f net: stmmac: fix dma queue left shift overflow issue
[ Upstream commit 613b065ca3 ]

When queue number is > 4, left shift overflows due to 32 bits
integer variable. Mask calculation is wrong for MTL_RXQ_DMA_MAP1.

If CONFIG_UBSAN is enabled, kernel dumps below warning:
[   10.363842] ==================================================================
[   10.363882] UBSAN: shift-out-of-bounds in /build/linux-intel-iotg-5.15-8e6Tf4/
linux-intel-iotg-5.15-5.15.0/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:224:12
[   10.363929] shift exponent 40 is too large for 32-bit type 'unsigned int'
[   10.363953] CPU: 1 PID: 599 Comm: NetworkManager Not tainted 5.15.0-1003-intel-iotg
[   10.363956] Hardware name: ADLINK Technology Inc. LEC-EL/LEC-EL, BIOS 0.15.11 12/22/2021
[   10.363958] Call Trace:
[   10.363960]  <TASK>
[   10.363963]  dump_stack_lvl+0x4a/0x5f
[   10.363971]  dump_stack+0x10/0x12
[   10.363974]  ubsan_epilogue+0x9/0x45
[   10.363976]  __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
[   10.363979]  ? wake_up_klogd+0x4a/0x50
[   10.363983]  ? vprintk_emit+0x8f/0x240
[   10.363986]  dwmac4_map_mtl_dma.cold+0x42/0x91 [stmmac]
[   10.364001]  stmmac_mtl_configuration+0x1ce/0x7a0 [stmmac]
[   10.364009]  ? dwmac410_dma_init_channel+0x70/0x70 [stmmac]
[   10.364020]  stmmac_hw_setup.cold+0xf/0xb14 [stmmac]
[   10.364030]  ? page_pool_alloc_pages+0x4d/0x70
[   10.364034]  ? stmmac_clear_tx_descriptors+0x6e/0xe0 [stmmac]
[   10.364042]  stmmac_open+0x39e/0x920 [stmmac]
[   10.364050]  __dev_open+0xf0/0x1a0
[   10.364054]  __dev_change_flags+0x188/0x1f0
[   10.364057]  dev_change_flags+0x26/0x60
[   10.364059]  do_setlink+0x908/0xc40
[   10.364062]  ? do_setlink+0xb10/0xc40
[   10.364064]  ? __nla_validate_parse+0x4c/0x1a0
[   10.364068]  __rtnl_newlink+0x597/0xa10
[   10.364072]  ? __nla_reserve+0x41/0x50
[   10.364074]  ? __kmalloc_node_track_caller+0x1d0/0x4d0
[   10.364079]  ? pskb_expand_head+0x75/0x310
[   10.364082]  ? nla_reserve_64bit+0x21/0x40
[   10.364086]  ? skb_free_head+0x65/0x80
[   10.364089]  ? security_sock_rcv_skb+0x2c/0x50
[   10.364094]  ? __cond_resched+0x19/0x30
[   10.364097]  ? kmem_cache_alloc_trace+0x15a/0x420
[   10.364100]  rtnl_newlink+0x49/0x70

This change fixes MTL_RXQ_DMA_MAP1 mask issue and channel/queue
mapping warning.

Fixes: d43042f4da ("net: stmmac: mapping mtl rx to dma channel")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216195
Reported-by: Cedric Wassenaar <cedric@bytespeed.nl>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:17 +02:00
Adrian Hunter
34e98fce9a perf tests: Fix Convert perf time to TSC test for hybrid
[ Upstream commit deb44a6249 ]

The test does not always correctly determine the number of events for
hybrids, nor allow for more than 1 evsel when parsing.

Fix by iterating the events actually created and getting the correct
evsel for the events processed.

Fixes: d9da6f70eb ("perf tests: Support 'Convert perf time to TSC' test for hybrid")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20220713123459.24145-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:17 +02:00
Robert Hancock
196c21deb0 i2c: cadence: Change large transfer count reset logic to be unconditional
[ Upstream commit 4ca8ca873d ]

Problems were observed on the Xilinx ZynqMP platform with large I2C reads.
When a read of 277 bytes was performed, the controller NAKed the transfer
after only 252 bytes were transferred and returned an ENXIO error on the
transfer.

There is some code in cdns_i2c_master_isr to handle this case by resetting
the transfer count in the controller before it reaches 0, to allow larger
transfers to work, but it was conditional on the CDNS_I2C_BROKEN_HOLD_BIT
quirk being set on the controller, and ZynqMP uses the r1p14 version of
the core where this quirk is not being set. The requirement to do this to
support larger reads seems like an inherently required workaround due to
the core only having an 8-bit transfer size register, so it does not
appear that this should be conditional on the broken HOLD bit quirk which
is used elsewhere in the driver.

Remove the dependency on the CDNS_I2C_BROKEN_HOLD_BIT for this transfer
size reset logic to fix this problem.

Fixes: 63cab195bf ("i2c: removed work arounds in i2c driver for Zynq Ultrascale+ MPSoC")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:17 +02:00
Vadim Pasternak
66b73ef38d i2c: mlxcpld: Fix register setting for 400KHz frequency
[ Upstream commit e1f77ecc75 ]

Fix setting of 'Half Cycle' register for 400KHz frequency.

Fixes: fa1049135c ("i2c: mlxcpld: Modify register setting for 400KHz frequency")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:16 +02:00
Menglong Dong
b8e68fce6f net: ipv4: use kfree_skb_reason() in ip_rcv_finish_core()
[ Upstream commit c1f166d1f7 ]

Replace kfree_skb() with kfree_skb_reason() in ip_rcv_finish_core(),
following drop reasons are introduced:

SKB_DROP_REASON_IP_RPFILTER
SKB_DROP_REASON_UNICAST_IN_L2_MULTICAST

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:16 +02:00
Menglong Dong
ad5a78ed13 net: ipv4: use kfree_skb_reason() in ip_rcv_core()
[ Upstream commit 33cba42985 ]

Replace kfree_skb() with kfree_skb_reason() in ip_rcv_core(). Three new
drop reasons are introduced:

SKB_DROP_REASON_OTHERHOST
SKB_DROP_REASON_IP_CSUM
SKB_DROP_REASON_IP_INHDR

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:16 +02:00
Menglong Dong
82cda99184 net: netfilter: use kfree_drop_reason() for NF_DROP
[ Upstream commit 2df3041ba3 ]

Replace kfree_skb() with kfree_skb_reason() in nf_hook_slow() when
skb is dropped by reason of NF_DROP. Following new drop reasons
are introduced:

SKB_DROP_REASON_NETFILTER_DROP

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:16 +02:00
Menglong Dong
f3ed670ef8 net: skb_drop_reason: add document for drop reasons
[ Upstream commit 88590b3693 ]

Add document for following existing drop reasons:

SKB_DROP_REASON_NOT_SPECIFIED
SKB_DROP_REASON_NO_SOCKET
SKB_DROP_REASON_PKT_TOO_SMALL
SKB_DROP_REASON_TCP_CSUM
SKB_DROP_REASON_SOCKET_FILTER
SKB_DROP_REASON_UDP_CSUM

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:16 +02:00
Menglong Dong
8ac90de3d1 net: socket: rename SKB_DROP_REASON_SOCKET_FILTER
[ Upstream commit 364df53c08 ]

Rename SKB_DROP_REASON_SOCKET_FILTER, which is used
as the reason of skb drop out of socket filter before
it's part of a released kernel. It will be used for
more protocols than just TCP in future series.

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/all/20220127091308.91401-2-imagedong@tencent.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:16 +02:00
Menglong Dong
b7adefdae2 net: skb: use kfree_skb_reason() in __udp4_lib_rcv()
[ Upstream commit 1c7fab70df ]

Replace kfree_skb() with kfree_skb_reason() in __udp4_lib_rcv.
New drop reason 'SKB_DROP_REASON_UDP_CSUM' is added for udp csum
error.

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:15 +02:00
Menglong Dong
1629144da3 net: skb: use kfree_skb_reason() in tcp_v4_rcv()
[ Upstream commit 8512559741 ]

Replace kfree_skb() with kfree_skb_reason() in tcp_v4_rcv(). Following
drop reasons are added:

SKB_DROP_REASON_NO_SOCKET
SKB_DROP_REASON_PKT_TOO_SMALL
SKB_DROP_REASON_TCP_CSUM
SKB_DROP_REASON_TCP_FILTER

After this patch, 'kfree_skb' event will print message like this:

$           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
$              | |         |   |||||     |         |
          <idle>-0       [000] ..s1.    36.113438: kfree_skb: skbaddr=(____ptrval____) protocol=2048 location=(____ptrval____) reason: NO_SOCKET

The reason of skb drop is printed too.

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:15 +02:00
Menglong Dong
5158e18225 net: skb: introduce kfree_skb_reason()
[ Upstream commit c504e5c2f9 ]

Introduce the interface kfree_skb_reason(), which is able to pass
the reason why the skb is dropped to 'kfree_skb' tracepoint.

Add the 'reason' field to 'trace_kfree_skb', therefor user can get
more detail information about abnormal skb with 'drop_monitor' or
eBPF.

All drop reasons are defined in the enum 'skb_drop_reason', and
they will be print as string in 'kfree_skb' tracepoint in format
of 'reason: XXX'.

( Maybe the reasons should be defined in a uapi header file, so that
user space can use them? )

Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:15 +02:00
Liang He
88ec2ff42d net: dsa: microchip: ksz_common: Fix refcount leak bug
[ Upstream commit a14bd74754 ]

In ksz_switch_register(), we should call of_node_put() for the
reference returned by of_get_child_by_name() which has increased
the refcount.

Fixes: 912aae27c6 ("net: dsa: microchip: really look for phy-mode in port nodes")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220714153138.375919-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:15 +02:00
Sascha Hauer
212a5360ef mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times
[ Upstream commit 0fddf9ad06 ]

06781a5026 Fixes the calculation of the DEVICE_BUSY_TIMEOUT register
value from busy_timeout_cycles. busy_timeout_cycles is calculated wrong
though: It is calculated based on the maximum page read time, but the
timeout is also used for page write and block erase operations which
require orders of magnitude bigger timeouts.

Fix this by calculating busy_timeout_cycles from the maximum of
tBERS_max and tPROG_max.

This is for now the easiest and most obvious way to fix the driver.
There's room for improvements though: The NAND_OP_WAITRDY_INSTR tells us
the desired timeout for the current operation, so we could program the
timeout dynamically for each operation instead of setting a fixed
timeout. Also we could wire up the interrupt handler to actually detect
and forward timeouts occurred when waiting for the chip being ready.

As a sidenote I verified that the change in 06781a5026 is really
correct. I wired up the interrupt handler in my tree and measured the
time between starting the operation and the timeout interrupt handler
coming in. The time increases 41us with each step in the timeout
register which corresponds to 4096 clock cycles with the 99MHz clock
that I have.

Fixes: 06781a5026 ("mtd: rawnand: gpmi: Fix setting busy timeout setting")
Fixes: b120612206 ("mtd: rawniand: gpmi: use core timings instead of an empirical derivation")
Cc: stable@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Han Xu <han.xu@nxp.com>
Tested-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:15 +02:00
Dario Binacchi
0156b402a5 mtd: rawnand: gpmi: validate controller clock rate
[ Upstream commit 15e27d197a ]

What to do when the real rate of the gpmi clock is not equal to the
required one? The solutions proposed in [1] did not lead to a conclusion
on how to validate the clock rate, so, inspired by the document [2], I
consider the rate correct only if not lower or equal to the rate of the
previous edo mode. In fact, in chapter 4.16.2 (NV-DDR) of the document [2],
it is written that "If the host selects timing mode n, then its clock
period shall be faster than the clock period of timing mode n-1 and
slower than or equal to the clock period of timing mode n.". I thought
that it could therefore also be used in this case, without therefore
having to define the valid rate ranges empirically.

For example, suppose that gpmi_nfc_compute_timings() is called to set
edo mode 5 (100MHz) but the rate returned by clk_round_rate() is 80MHz
(edo mode 4). In this case gpmi_nfc_compute_timings() will return error,
and will be called again to set edo mode 4, which this time will be
successful.

[1] https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org
[2] http://www.onfi.org/-/media/client/onfi/specs/onfi_3_0_gold.pdf?la=en

Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220118095434.35081-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:15 +02:00
Biao Huang
f53c6ee5e7 net: stmmac: fix unbalanced ptp clock issue in suspend/resume flow
[ Upstream commit f4c7d8948e ]

Current stmmac driver will prepare/enable ptp_ref clock in
stmmac_init_tstamp_counter().

The stmmac_pltfr_noirq_suspend will disable it once in suspend flow.

But in resume flow,
	stmmac_pltfr_noirq_resume --> stmmac_init_tstamp_counter
	stmmac_resume --> stmmac_hw_setup --> stmmac_init_ptp --> stmmac_init_tstamp_counter
ptp_ref clock reference counter increases twice, which leads to unbalance
ptp clock when resume back.

Move ptp_ref clock prepare/enable out of stmmac_init_tstamp_counter to fix it.

Fixes: 0735e639f1 ("net: stmmac: skip only stmmac_ptp_register when resume from suspend")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:14 +02:00
Biao Huang
f784d23256 net: stmmac: fix pm runtime issue in stmmac_dvr_remove()
[ Upstream commit 0d9a15913b ]

If netif is running when stmmac_dvr_remove is invoked,
the unregister_netdev will call ndo_stop(stmmac_release) and
vlan_kill_rx_filter(stmmac_vlan_rx_kill_vid).

Currently, stmmac_dvr_remove() will disable pm runtime before
unregister_netdev. When stmmac_vlan_rx_kill_vid is invoked,
pm_runtime_resume_and_get in it returns EACCESS error number,
and reports:

	dwmac-mediatek 11021000.ethernet eth0: stmmac_dvr_remove: removing driver
	dwmac-mediatek 11021000.ethernet eth0: FPE workqueue stop
	dwmac-mediatek 11021000.ethernet eth0: failed to kill vid 0081/0

Move the pm_runtime_disable to the end of stmmac_dvr_remove
to fix this issue.

Fixes: 6449520391 ("net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:14 +02:00
Kuniyuki Iwashima
e6b6f027e2 tcp: Fix a data-race around sysctl_tcp_probe_interval.
[ Upstream commit 2a85388f1d ]

While reading sysctl_tcp_probe_interval, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 05cbc0db03 ("ipv4: Create probe timer for tcp PMTU as per RFC4821")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:14 +02:00
Kuniyuki Iwashima
f524c3e7f6 tcp: Fix a data-race around sysctl_tcp_probe_threshold.
[ Upstream commit 92c0aa4175 ]

While reading sysctl_tcp_probe_threshold, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 6b58e0a5f3 ("ipv4: Use binary search to choose tcp PMTU probe_size")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:14 +02:00
Kuniyuki Iwashima
cc36c37f5f tcp: Fix a data-race around sysctl_tcp_mtu_probe_floor.
[ Upstream commit 8e92d44236 ]

While reading sysctl_tcp_mtu_probe_floor, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: c04b79b6cf ("tcp: add new tcp_mtu_probe_floor sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:14 +02:00
Kuniyuki Iwashima
0fc9357282 tcp: Fix data-races around sysctl_tcp_min_snd_mss.
[ Upstream commit 78eb166cde ]

While reading sysctl_tcp_min_snd_mss, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 5f3e2bf008 ("tcp: add tcp_min_snd_mss sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:14 +02:00
Kuniyuki Iwashima
4d7dea651b tcp: Fix data-races around sysctl_tcp_base_mss.
[ Upstream commit 88d78bc097 ]

While reading sysctl_tcp_base_mss, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 5d424d5a67 ("[TCP]: MTU probing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:14 +02:00
Kuniyuki Iwashima
aabe9438fd tcp: Fix data-races around sysctl_tcp_mtu_probing.
[ Upstream commit f47d00e077 ]

While reading sysctl_tcp_mtu_probing, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 5d424d5a67 ("[TCP]: MTU probing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:14 +02:00
Kuniyuki Iwashima
9ba9cd43b5 tcp: Fix data-races around sysctl_tcp_l3mdev_accept.
[ Upstream commit 08a75f1067 ]

While reading sysctl_tcp_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 6dd9a14e92 ("net: Allow accepted sockets to be bound to l3mdev domain")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-29 17:25:14 +02:00