Changes in 4.19.47
x86: Hide the int3_emulate_call/jmp functions from UML
ext4: do not delete unlinked inode from orphan list on failed truncate
ext4: wait for outstanding dio during truncate in nojournal mode
f2fs: Fix use of number of devices
KVM: x86: fix return value for reserved EFER
bio: fix improper use of smp_mb__before_atomic()
sbitmap: fix improper use of smp_mb__before_atomic()
Revert "scsi: sd: Keep disk read-only when re-reading partition"
crypto: vmx - CTR: always increment IV as quadword
mmc: sdhci-iproc: cygnus: Set NO_HISPD bit to fix HS50 data hold time problem
mmc: sdhci-iproc: Set NO_HISPD bit to fix HS50 data hold time problem
kvm: svm/avic: fix off-by-one in checking host APIC ID
libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead
arm64/kernel: kaslr: reduce module randomization range to 2 GB
arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable
gfs2: Fix sign extension bug in gfs2_update_stats
btrfs: don't double unlock on error in btrfs_punch_hole
Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path
Btrfs: avoid fallback to transaction commit during fsync of files with holes
Btrfs: fix race between ranged fsync and writeback of adjacent ranges
btrfs: sysfs: Fix error path kobject memory leak
btrfs: sysfs: don't leak memory when failing add fsid
udlfb: fix some inconsistent NULL checking
fbdev: fix divide error in fb_var_to_videomode
NFSv4.2 fix unnecessary retry in nfs4_copy_file_range
NFSv4.1 fix incorrect return value in copy_file_range
bpf: add bpf_jit_limit knob to restrict unpriv allocations
brcmfmac: assure SSID length from firmware is limited
brcmfmac: add subtype check for event handling in data path
arm64: errata: Add workaround for Cortex-A76 erratum #1463225
btrfs: honor path->skip_locking in backref code
ovl: relax WARN_ON() for overlapping layers use case
fbdev: fix WARNING in __alloc_pages_nodemask bug
media: cpia2: Fix use-after-free in cpia2_exit
media: serial_ir: Fix use-after-free in serial_ir_init_module
media: vb2: add waiting_in_dqbuf flag
media: vivid: use vfree() instead of kfree() for dev->bitmap_cap
ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit
bpf: devmap: fix use-after-free Read in __dev_map_entry_free
batman-adv: mcast: fix multicast tt/tvlv worker locking
at76c50x-usb: Don't register led_trigger if usb_register_driver failed
acct_on(): don't mess with freeze protection
Revert "btrfs: Honour FITRIM range constraints during free space trim"
gfs2: Fix lru_count going negative
cxgb4: Fix error path in cxgb4_init_module
NFS: make nfs_match_client killable
IB/hfi1: Fix WQ_MEM_RECLAIM warning
gfs2: Fix occasional glock use-after-free
mmc: core: Verify SD bus width
tools/bpf: fix perf build error with uClibc (seen on ARC)
selftests/bpf: set RLIMIT_MEMLOCK properly for test_libbpf_open.c
bpftool: exclude bash-completion/bpftool from .gitignore pattern
dmaengine: tegra210-dma: free dma controller in remove()
net: ena: gcc 8: fix compilation warning
hv_netvsc: fix race that may miss tx queue wakeup
Bluetooth: Ignore CC events not matching the last HCI command
pinctrl: zte: fix leaked of_node references
ASoC: Intel: kbl_da7219_max98357a: Map BTN_0 to KEY_PLAYPAUSE
usb: dwc2: gadget: Increase descriptors count for ISOC's
usb: dwc3: move synchronize_irq() out of the spinlock protected block
ASoC: hdmi-codec: unlock the device on startup errors
powerpc/perf: Return accordingly on invalid chip-id in
powerpc/boot: Fix missing check of lseek() return value
powerpc/perf: Fix loop exit condition in nest_imc_event_init
ASoC: imx: fix fiq dependencies
spi: pxa2xx: fix SCR (divisor) calculation
brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()
ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()
drm/nouveau/bar/nv50: ensure BAR is mapped
media: stm32-dcmi: return appropriate error codes during probe
ARM: vdso: Remove dependency with the arch_timer driver internals
arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable
powerpc/watchdog: Use hrtimers for per-CPU heartbeat
sched/cpufreq: Fix kobject memleak
scsi: qla2xxx: Fix a qla24xx_enable_msix() error path
scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()
scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session()
scsi: qla2xxx: Fix hardirq-unsafe locking
x86/modules: Avoid breaking W^X while loading modules
Btrfs: fix data bytes_may_use underflow with fallocate due to failed quota reserve
btrfs: fix panic during relocation after ENOSPC before writeback happens
btrfs: Don't panic when we can't find a root key
iwlwifi: pcie: don't crash on invalid RX interrupt
rtc: 88pm860x: prevent use-after-free on device remove
rtc: stm32: manage the get_irq probe defer case
scsi: qedi: Abort ep termination if offload not scheduled
s390/kexec_file: Fix detection of text segment in ELF loader
sched/nohz: Run NOHZ idle load balancer on HK_FLAG_MISC CPUs
w1: fix the resume command API
s390: qeth: address type mismatch warning
dmaengine: pl330: _stop: clear interrupt status
mac80211/cfg80211: update bss channel on channel switch
libbpf: fix samples/bpf build failure due to undefined UINT32_MAX
slimbus: fix a potential NULL pointer dereference in of_qcom_slim_ngd_register
ASoC: fsl_sai: Update is_slave_mode with correct value
mwifiex: prevent an array overflow
rsi: Fix NULL pointer dereference in kmalloc
net: cw1200: fix a NULL pointer dereference
nvme: set 0 capacity if namespace block size exceeds PAGE_SIZE
nvme-rdma: fix a NULL deref when an admin connect times out
crypto: sun4i-ss - Fix invalid calculation of hash end
bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set
bcache: return error immediately in bch_journal_replay()
bcache: fix failure in journal relplay
bcache: add failure check to run_cache_set() for journal replay
bcache: avoid clang -Wunintialized warning
RDMA/cma: Consider scope_id while binding to ipv6 ll address
vfio-ccw: Do not call flush_workqueue while holding the spinlock
vfio-ccw: Release any channel program when releasing/removing vfio-ccw mdev
x86/build: Move _etext to actual end of .text
smpboot: Place the __percpu annotation correctly
x86/mm: Remove in_nmi() warning from 64-bit implementation of vmalloc_fault()
mm/uaccess: Use 'unsigned long' to placate UBSAN warnings on older GCC versions
Bluetooth: hci_qca: Give enough time to ROME controller to bootup.
HID: logitech-hidpp: use RAP instead of FAP to get the protocol version
pinctrl: pistachio: fix leaked of_node references
pinctrl: samsung: fix leaked of_node references
clk: rockchip: undo several noc and special clocks as critical on rk3288
perf/arm-cci: Remove broken race mitigation
dmaengine: at_xdmac: remove BUG_ON macro in tasklet
media: coda: clear error return value before picture run
media: ov6650: Move v4l2_clk_get() to ov6650_video_probe() helper
media: au0828: stop video streaming only when last user stops
media: ov2659: make S_FMT succeed even if requested format doesn't match
audit: fix a memory leak bug
media: stm32-dcmi: fix crash when subdev do not expose any formats
media: au0828: Fix NULL pointer dereference in au0828_analog_stream_enable()
media: pvrusb2: Prevent a buffer overflow
iio: adc: stm32-dfsdm: fix unmet direct dependencies detected
block: fix use-after-free on gendisk
powerpc/numa: improve control of topology updates
powerpc/64: Fix booting large kernels with STRICT_KERNEL_RWX
random: fix CRNG initialization when random.trust_cpu=1
random: add a spinlock_t to struct batched_entropy
cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock
sched/core: Check quota and period overflow at usec to nsec conversion
sched/rt: Check integer overflow at usec to nsec conversion
sched/core: Handle overflow in cpu_shares_write_u64
staging: vc04_services: handle kzalloc failure
drm/msm: a5xx: fix possible object reference leak
irq_work: Do not raise an IPI when queueing work on the local CPU
thunderbolt: Take domain lock in switch sysfs attribute callbacks
s390/qeth: handle error from qeth_update_from_chp_desc()
USB: core: Don't unbind interfaces following device reset failure
x86/irq/64: Limit IST stack overflow check to #DB stack
drm: etnaviv: avoid DMA API warning when importing buffers
phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode
phy: mapphone-mdm6600: add gpiolib dependency
i40e: Able to add up to 16 MAC filters on an untrusted VF
i40e: don't allow changes to HW VLAN stripping on active port VLANs
ACPI/IORT: Reject platform device creation on NUMA node mapping failure
arm64: vdso: Fix clock_getres() for CLOCK_REALTIME
RDMA/cxgb4: Fix null pointer dereference on alloc_skb failure
perf/x86/msr: Add Icelake support
perf/x86/intel/rapl: Add Icelake support
perf/x86/intel/cstate: Add Icelake support
hwmon: (vt1211) Use request_muxed_region for Super-IO accesses
hwmon: (smsc47m1) Use request_muxed_region for Super-IO accesses
hwmon: (smsc47b397) Use request_muxed_region for Super-IO accesses
hwmon: (pc87427) Use request_muxed_region for Super-IO accesses
hwmon: (f71805f) Use request_muxed_region for Super-IO accesses
scsi: libsas: Do discovery on empty PHY to update PHY info
mmc: core: make pwrseq_emmc (partially) support sleepy GPIO controllers
mmc_spi: add a status check for spi_sync_locked
mmc: sdhci-of-esdhc: add erratum eSDHC5 support
mmc: sdhci-of-esdhc: add erratum A-009204 support
mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support
drm/amdgpu: fix old fence check in amdgpu_fence_emit
PM / core: Propagate dev->power.wakeup_path when no callbacks
clk: rockchip: Fix video codec clocks on rk3288
extcon: arizona: Disable mic detect if running when driver is removed
clk: rockchip: Make rkpwm a critical clock on rk3288
s390: zcrypt: initialize variables before_use
x86/microcode: Fix the ancient deprecated microcode loading method
s390/mm: silence compiler warning when compiling without CONFIG_PGSTE
s390: cio: fix cio_irb declaration
selftests: cgroup: fix cleanup path in test_memcg_subtree_control()
qmi_wwan: Add quirk for Quectel dynamic config
cpufreq: ppc_cbe: fix possible object reference leak
cpufreq/pasemi: fix possible object reference leak
cpufreq: pmac32: fix possible object reference leak
cpufreq: kirkwood: fix possible object reference leak
block: sed-opal: fix IOC_OPAL_ENABLE_DISABLE_MBR
x86/build: Keep local relocations with ld.lld
drm/pl111: fix possible object reference leak
iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
iio: hmc5843: fix potential NULL pointer dereferences
iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data
iio: adc: ti-ads7950: Fix improper use of mlock
selftests/bpf: ksym_search won't check symbols exists
rtlwifi: fix a potential NULL pointer dereference
mwifiex: Fix mem leak in mwifiex_tm_cmd
brcmfmac: fix missing checks for kmemdup
b43: shut up clang -Wuninitialized variable warning
brcmfmac: convert dev_init_lock mutex to completion
brcmfmac: fix WARNING during USB disconnect in case of unempty psq
brcmfmac: fix race during disconnect when USB completion is in progress
brcmfmac: fix Oops when bringing up interface during USB disconnect
rtc: xgene: fix possible race condition
rtlwifi: fix potential NULL pointer dereference
scsi: ufs: Fix regulator load and icc-level configuration
scsi: ufs: Avoid configuring regulator with undefined voltage range
drm/panel: otm8009a: Add delay at the end of initialization
arm64: cpu_ops: fix a leaked reference by adding missing of_node_put
wil6210: fix return code of wmi_mgmt_tx and wmi_mgmt_tx_ext
x86/uaccess, ftrace: Fix ftrace_likely_update() vs. SMAP
x86/uaccess, signal: Fix AC=1 bloat
x86/ia32: Fix ia32_restore_sigcontext() AC leak
x86/uaccess: Fix up the fixup
chardev: add additional check for minor range overlap
RDMA/hns: Fix bad endianess of port_pd variable
sh: sh7786: Add explicit I/O cast to sh7786_mm_sel()
HID: core: move Usage Page concatenation to Main item
ASoC: eukrea-tlv320: fix a leaked reference by adding missing of_node_put
ASoC: fsl_utils: fix a leaked reference by adding missing of_node_put
cxgb3/l2t: Fix undefined behaviour
HID: logitech-hidpp: change low battery level threshold from 31 to 30 percent
spi: tegra114: reset controller on probe
kobject: Don't trigger kobject_uevent(KOBJ_REMOVE) twice.
media: video-mux: fix null pointer dereferences
media: wl128x: prevent two potential buffer overflows
media: gspca: Kill URBs on USB device disconnect
efifb: Omit memory map check on legacy boot
thunderbolt: property: Fix a missing check of kzalloc
thunderbolt: Fix to check the return value of kmemdup
timekeeping: Force upper bound for setting CLOCK_REALTIME
scsi: qedf: Add missing return in qedf_post_io_req() in the fcport offload check
virtio_console: initialize vtermno value for ports
tty: ipwireless: fix missing checks for ioremap
overflow: Fix -Wtype-limits compilation warnings
x86/mce: Fix machine_check_poll() tests for error types
rcutorture: Fix cleanup path for invalid torture_type strings
x86/mce: Handle varying MCA bank counts
rcuperf: Fix cleanup path for invalid perf_type strings
usb: core: Add PM runtime calls to usb_hcd_platform_shutdown
scsi: qla4xxx: avoid freeing unallocated dma memory
scsi: lpfc: avoid uninitialized variable warning
selinux: avoid uninitialized variable warning
batman-adv: allow updating DAT entry timeouts on incoming ARP Replies
dmaengine: tegra210-adma: use devm_clk_*() helpers
hwrng: omap - Set default quality
thunderbolt: Fix to check return value of ida_simple_get
thunderbolt: Fix to check for kmemdup failure
drm/amd/display: fix releasing planes when exiting odm
thunderbolt: property: Fix a NULL pointer dereference
e1000e: Disable runtime PM on CNP+
tinydrm/mipi-dbi: Use dma-safe buffers for all SPI transfers
igb: Exclude device from suspend direct complete optimization
media: si2165: fix a missing check of return value
media: dvbsky: Avoid leaking dvb frontend
media: m88ds3103: serialize reset messages in m88ds3103_set_frontend
media: staging: davinci_vpfe: disallow building with COMPILE_TEST
drm/amd/display: Fix Divide by 0 in memory calculations
drm/amd/display: Set stream->mode_changed when connectors change
scsi: ufs: fix a missing check of devm_reset_control_get
media: vimc: stream: fix thread state before sleep
media: gspca: do not resubmit URBs when streaming has stopped
media: go7007: avoid clang frame overflow warning with KASAN
media: vimc: zero the media_device on probe
scsi: lpfc: Fix FDMI manufacturer attribute value
scsi: lpfc: Fix fc4type information for FDMI
media: saa7146: avoid high stack usage with clang
scsi: lpfc: Fix SLI3 commands being issued on SLI4 devices
spi : spi-topcliff-pch: Fix to handle empty DMA buffers
drm/omap: dsi: Fix PM for display blank with paired dss_pll calls
spi: rspi: Fix sequencer reset during initialization
spi: imx: stop buffer overflow in RX FIFO flush
spi: Fix zero length xfer bug
ASoC: davinci-mcasp: Fix clang warning without CONFIG_PM
drm/v3d: Handle errors from IRQ setup.
drm/drv: Hold ref on parent device during drm_device lifetime
drm: Wake up next in drm_read() chain if we are forced to putback the event
drm/sun4i: dsi: Change the start delay calculation
vfio-ccw: Prevent quiesce function going into an infinite loop
drm/sun4i: dsi: Enforce boundaries on the start delay
NFS: Fix a double unlock from nfs_match,get_client
Linux 4.19.47
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit d1ffa760d2 ]
The quiesce function calls cio_cancel_halt_clear() and if we
get an -EBUSY we go into a loop where we:
- wait for any interrupts
- flush all I/O in the workqueue
- retry cio_cancel_halt_clear
During the period where we are waiting for interrupts or
flushing all I/O, the channel subsystem could have completed
a halt/clear action and turned off the corresponding activity
control bits in the subchannel status word. This means the next
time we call cio_cancel_halt_clear(), we will again start by
calling cancel subchannel and so we can be stuck between calling
cancel and halt forever.
Rather than calling cio_cancel_halt_clear() immediately after
waiting, let's try to disable the subchannel. If we succeed in
disabling the subchannel then we know nothing else can happen
with the device.
Suggested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <4d5a4b98ab1b41ac6131b5c36de18b76c5d66898.1555449329.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da676c6aa6 ]
The current calculation for the video start delay in the current DSI driver
is that it is the total vertical size, minus the front porch and sync length,
plus 1. This equals to the active vertical size plus the back porch plus 1.
That 1 is coming in the Allwinner BSP from an variable that is set to 1.
However, if we look at the Allwinner BSP more closely, and especially in
the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can
see that this variable is actually computed from the porches and the sync
minus 10, clamped between 8 and 100.
This fixes the start delay symptom we've seen on some panels (vblank
timeouts with vertical white stripes at the bottom of the panel).
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ca5104715 ]
Building with clang shows a variable that is only used by the
suspend/resume functions but defined outside of their #ifdef block:
sound/soc/ti/davinci-mcasp.c:48:12: error: variable 'context_regs' is not needed and will not be emitted
We commonly fix these by marking the PM functions as __maybe_unused,
but here that would grow the davinci_mcasp structure, so instead
add another #ifdef here.
Fixes: 1cc0c054f3 ("ASoC: davinci-mcasp: Convert the context save/restore to use array")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5442dcaa0d ]
This fixes a bug for messages containing both zero length and
unidirectional xfers.
The function spi_map_msg will allocate dummy tx and/or rx buffers
for use with unidirectional transfers when the hardware can only do
a bidirectional transfer. That dummy buffer will be used in place
of a NULL buffer even when the xfer length is 0.
Then in the function __spi_map_msg, if he hardware can dma,
the zero length xfer will have spi_map_buf called on the dummy
buffer.
Eventually, __sg_alloc_table is called and returns -EINVAL
because nents == 0.
This fix prevents the error by not using the dummy buffer when
the xfer length is zero.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c842749ea1 ]
Commit 71abd29057 ("spi: imx: Add support for SPI Slave mode") added
an RX FIFO flush before start of a transfer. In slave mode, the master
may have sent more data than expected and this data will still be in the
RX FIFO at the start of the next transfer, and so needs to be flushed.
However, the code to do the flush was accidentally saving this data into
the previous transfer's RX buffer, clobbering the contents of whatever
followed that buffer.
Change it to empty the FIFO and throw away the data. Every one of the
RX functions for the different eCSPI versions and modes reads the RX
FIFO data using the same readl() call, so just use that, rather than
using the spi_imx->rx function pointer and making sure all the different
rx functions have a working "throw away" mode.
There is another issue, which affects master mode when switching from
DMA to PIO. There can be extra data in the RX FIFO which triggers this
flush code, causing memory corruption in the same manner. I don't know
why this data is unexpectedly in the FIFO. It's likely there is a
different bug or erratum responsible for that. But regardless of that,
I think this is proper fix the for bug at hand here.
Fixes: 71abd29057 ("spi: imx: Add support for SPI Slave mode")
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26843bb128 ]
While the sequencer is reset after each SPI message since commit
880c6d114f ("spi: rspi: Add support for Quad and Dual SPI
Transfers on QSPI"), it was never reset for the first message, thus
relying on reset state or bootloader settings.
Fix this by initializing it explicitly during configuration.
Fixes: 0b2182ddac ("spi: add support for Renesas RSPI")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe4ed1b457 ]
Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not
paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves
the DSS clocks enabled when the display is blanked wasting about extra
5mW of power while idle.
The clock that is left on by not calling dss_pll_disable() is
DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for
DSI PLL.
We can fix this issue by by making the current dsi_pll_uninit() into
dsi_pll_disable(). This way we can just call dss_pll_disable() from
dsi_display_uninit_dsi() and the code becomes a bit easier to follow.
However, we need to also consider that DSI PLL can be muxed for DVI too
as pointed out by Tomi Valkeinen <tomi.valkeinen@ti.com>. In the DVI
case, we want to unconditionally disable the clocks. To get around this
issue, we separate out the DSI lane handling from dsi_pll_enable() and
dsi_pll_disable() as suggested by Tomi in an earlier experimental patch.
So we must only toggle the DSI regulator based on the vdds_dsi_enabled
flag from dsi_display_init_dsi() and dsi_display_uninit_dsi().
We need to make these two changes together to avoid breaking things
for DVI when fixing the DSI clock handling. And this all causes a
slight renumbering of the error path for dsi_display_init_dsi().
Suggested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f37d8e67f3 ]
pch_alloc_dma_buf allocated tx, rx DMA buffers which can fail. Further,
these buffers are used without a check. The patch checks for these
failures and sends the error upstream.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c95a3b4b0f ]
During debug, it was seen that the driver is issuing commands specific to
SLI3 on SLI4 devices. Although the adapter correctly rejected the command,
this should not be done.
Revise the code to stop sending these commands on a SLI4 adapter.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03aa4f191a ]
Two saa7146/hexium files contain a construct that causes a warning
when built with clang:
drivers/media/pci/saa7146/hexium_orion.c:210:12: error: stack frame size of 2272 bytes in function 'hexium_probe'
[-Werror,-Wframe-larger-than=]
static int hexium_probe(struct saa7146_dev *dev)
^
drivers/media/pci/saa7146/hexium_gemini.c:257:12: error: stack frame size of 2304 bytes in function 'hexium_attach'
[-Werror,-Wframe-larger-than=]
static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
^
This one happens regardless of KASAN, and the problem is that a
constructor to initialize a dynamically allocated structure leads
to a copy of that structure on the stack, whereas gcc initializes
it in place.
Link: https://bugs.llvm.org/show_bug.cgi?id=40776
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch warnings]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32a80c093b ]
The driver is reporting support for NVME even when not configured for NVME
operation.
Fix (and make more readable) when NVME protocol support is indicated.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f74267b51c ]
The media_device is part of a static global vimc_device struct.
The media framework expects this to be zeroed before it is
used, however, since this is a global this is not the case if
vimc is unbound and then bound again.
So call memset to ensure any left-over values are cleared.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed713a4a13 ]
clang-8 warns about one function here when KASAN is enabled, even
without the 'asan-stack' option:
drivers/media/usb/go7007/go7007-fw.c:1551:5: warning: stack frame size of 2656 bytes in function
I have reported this issue in the llvm bugzilla, but to make
it work with the clang-8 release, a small annotation is still
needed.
Link: https://bugs.llvm.org/show_bug.cgi?id=38809
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6f8bd59c2 ]
When streaming is stopped all URBs are killed, but in fill_frame and in
bulk_irq this results in an attempt to resubmit the killed URB. That is
not what you want and causes spurious kernel messages.
So check if streaming has stopped before resubmitting.
Also check against gspca_dev->streaming rather than vb2_start_streaming_called()
since vb2_start_streaming_called() will return true when in stop_streaming,
but gspca_dev->streaming is set to false when stop_streaming is called.
Fixes: 6992effe53 ("gspca: Kill all URBs before releasing any of them")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2978a505aa ]
The state TASK_UNINTERRUPTIBLE should be set just before
schedule_timeout() call, so it knows the sleep mode it should enter.
There is no point in setting TASK_UNINTERRUPTIBLE at the initialization
of the thread as schedule_timeout() will set the state back to
TASK_RUNNING.
This fixes a warning in __might_sleep() call, as it's expecting the
task to be in TASK_RUNNING state just before changing the state to
a sleeping state.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63a06181d7 ]
devm_reset_control_get could fail, so the fix checks its return value and
passes the error code upstream in case it fails.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9952f93cd ]
[Why]
The kms_plane@plane-position-covered-pipe-*-planes subtests can produce
a sequence of atomic commits such that neither active_changed nor
mode_changed but connectors_changed.
When this happens we remove the old stream from the context and add
a new stream but the new stream doesn't have mode_changed=true set.
This incorrect programming sequence causes CRC mismatches to occur in
the test.
The stream->mode_changed value should be set whenever a new stream
is created.
[How]
A new stream is created whenever drm_atomic_crtc_needs_modeset is true.
We previously covered the active_changed and mode_changed conditions
for the CRTC but connectors_changed is also checked within
drm_atomic_crtc_needs_modeset.
So just use drm_atomic_crtc_needs_modeset directly to determine the
mode_changed flag.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49dc762cff ]
The driver should really call dm365_isif_setup_pinmux() through a callback,
but uses a hack to include a davinci specific machine header file when
compile testing instead. This works almost everywhere, but not on the
ARM omap1 platform, which has another header named mach/mux.h. This
causes a build failure:
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: implicit declaration of function 'davinci_cfg_reg' [-Werror,-Wimplicit-function-declaration]
davinci_cfg_reg(DM365_VIN_CAM_WEN);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:18: error: use of undeclared identifier 'DM365_VIN_CAM_WEN'
davinci_cfg_reg(DM365_VIN_CAM_WEN);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2029:18: error: use of undeclared identifier 'DM365_VIN_CAM_VD'
davinci_cfg_reg(DM365_VIN_CAM_VD);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2030:18: error: use of undeclared identifier 'DM365_VIN_CAM_HD'
davinci_cfg_reg(DM365_VIN_CAM_HD);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2031:18: error: use of undeclared identifier 'DM365_VIN_YIN4_7_EN'
davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2032:18: error: use of undeclared identifier 'DM365_VIN_YIN0_3_EN'
davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
^
7 errors generated.
Exclude omap1 from compile-testing, under the assumption that all others
still work.
Fixes: 4907c73dee ("media: staging: davinci_vpfe: allow building with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 981fbe3da2 ]
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323
Users are experiencing problems with the DVBSky S960/S960C USB devices
since the following commit:
9d659ae: ("locking/mutex: Add lock handoff to avoid starvation")
The device malfunctions after running for an indeterminable period of
time, and the problem can only be cleared by rebooting the machine.
It is possible to encourage the problem to surface by blocking the
signal to the LNB.
Further debugging revealed the cause of the problem.
In the following capture:
- thread #1325 is running m88ds3103_set_frontend
- thread #42 is running ts2020_stat_work
a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
[1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
Two i2c messages are sent to perform a reset in m88ds3103_set_frontend:
a. 0x07, 0x80
b. 0x07, 0x00
However, as shown in the capture, the regmap mutex is being handed over
to another thread (ts2020_stat_work) in between these two messages.
>From here, the device responds to every i2c message with an 07 message,
and will only return to normal operation following a power cycle.
Use regmap_multi_reg_write to group the two reset messages, ensuring
both are processed before the regmap mutex is unlocked.
Signed-off-by: James Hutchinson <jahutchinson99@googlemail.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdfa59cd63 ]
Commit 14f4eaedda ("media: dvbsky: fix driver unregister logic") fixed
a use-after-free by removing the reference to the frontend after deleting
the backing i2c device.
This has the unfortunate side effect the frontend device is never freed
in the dvb core leaving a dangling device, leading to errors when the
dvb core tries to register the frontend after e.g. a replug as reported
here: https://www.spinics.net/lists/linux-media/msg138181.html
media: dvbsky: issues with DVBSky T680CI
===
[ 561.119145] sp2 8-0040: CIMaX SP2 successfully attached
[ 561.119161] usb 2-3: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[ 561.119174] sysfs: cannot create duplicate filename '/class/dvb/
dvb0.frontend0'
===
The use after free happened as dvb_usbv2_disconnect calls in this order:
- dvb_usb_device::props->exit(...)
- dvb_usbv2_adapter_frontend_exit(...)
+ if (fe) dvb_unregister_frontend(fe)
+ dvb_usb_device::props->frontend_detach(...)
Moving the release of the i2c device from exit() to frontend_detach()
avoids the dangling pointer access and allows the core to unregister
the frontend.
This was originally reported for a DVBSky T680CI, but it also affects
the MyGica T230C. As all supported devices structure the registration/
unregistration identically, apply the change for all device types.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ab34a0881 ]
si2165_readreg8() may fail. Looking into si2165_readreg8(), we will find
that "val_tmp" will be an uninitialized value when regmap_read() fails.
"val_tmp" is then assigned to "val". So if si2165_readreg8() fails,
"val" will be a random value. Further use will lead to undefined
behaviors. The fix checks if si2165_readreg8() fails, and if so, returns
its error code upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Matthias Schwarzott <zzam@gentoo.org>
Tested-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b6e13216b ]
igb sets different WoL settings in system suspend callback and runtime
suspend callback.
The suspend direct complete optimization leaves igb in runtime suspended
state with wrong WoL setting during system suspend.
To fix this, we need to disable suspend direct complete optimization to
let igb always use suspend callback to set correct WoL during system
suspend.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 459d69c407 ]
There are some new e1000e devices can only be woken up from D3 one time,
by plugging Ethernet cable. Subsequent cable plugging does set PME bit
correctly, but it still doesn't get woken up.
Since e1000e connects to the root complex directly, we rely on ACPI to
wake it up. In this case, the GPE from _PRW only works once and stops
working after that. Though it appears to be a platform bug, e1000e
maintainers confirmed that I219 does not support D3.
So disable runtime PM on CNP+ chips. We may need to disable earlier
generations if this bug also hit older platforms.
Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=280819
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 106204b56f ]
In case kzalloc fails, the fix releases resources and returns
-ENOMEM to avoid the NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cc12751cf ]
Memory allocated via kmemdup might fail and return a NULL pointer.
This patch adds a check on the return value of kmemdup and passes the
error upstream.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9aabb68568 ]
In enumerate_services, ida_simple_get on failure can return an error and
leaks memory. The patch ensures that the dev_set_name is set on non
failure cases, and releases memory during failure.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62f95ae805 ]
Newer combinations of the glibc, kernel and openssh can result in long initial
startup times on OMAP devices:
[ 6.671425] systemd-rc-once[102]: Creating ED25519 key; this may take some time ...
[ 142.652491] systemd-rc-once[102]: Creating ED25519 key; done.
due to the blocking getrandom(2) system call:
[ 142.610335] random: crng init done
Set the quality level for the omap hwrng driver allowing the kernel to use the
hwrng as an entropy source at boot.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6ed6491d5 ]
adma driver is using pm_clk_*() interface for managing clock resources.
With this it is observed that clocks remain ON always. This happens on
Tegra devices which use BPMP co-processor to manage clock resources,
where clocks are enabled during prepare phase. This is necessary because
clocks to BPMP are always blocking. When pm_clk_*() interface is used on
such Tegra devices, clock prepare count is not balanced till remove call
happens for the driver and hence clocks are seen ON always. Thus this
patch replaces pm_clk_*() with devm_clk_*() framework.
Suggested-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 099e6cc158 ]
Currently incoming ARP Replies, for example via a DHT-PUT message, do
not update the timeout for an already existing DAT entry. These ARP
Replies are dropped instead.
This however defeats the purpose of the DHCPACK snooping, for instance.
Right now, a DAT entry in the DHT will be purged every five minutes,
likely leading to a mesh-wide ARP Request broadcast after this timeout.
Which then recreates the entry. The idea of the DHCPACK snooping is to
be able to update an entry before a timeout happens, to avoid ARP Request
flooding.
This patch fixes this issue by updating a DAT entry on incoming
ARP Replies even if a matching DAT entry already exists. While still
filtering the ARP Reply towards the soft-interface, to avoid duplicate
messages on the client device side.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98bbbb76f2 ]
clang correctly points out a code path that would lead
to an uninitialized variable use:
security/selinux/netlabel.c:310:6: error: variable 'addr' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
if (ip_hdr(skb)->version == 4) {
^~~~~~~~~~~~~~~~~~~~~~~~~
security/selinux/netlabel.c:322:40: note: uninitialized use occurs here
rc = netlbl_conn_setattr(ep->base.sk, addr, &secattr);
^~~~
security/selinux/netlabel.c:310:2: note: remove the 'if' if its condition is always true
if (ip_hdr(skb)->version == 4) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
security/selinux/netlabel.c:291:23: note: initialize the variable 'addr' to silence this warning
struct sockaddr *addr;
^
= NULL
This is probably harmless since we should not see ipv6 packets
of CONFIG_IPV6 is disabled, but it's better to rearrange the code
so this cannot happen.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[PM: removed old patchwork link, fixed checkpatch.pl style errors]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faf5a744f4 ]
clang -Wuninitialized incorrectly sees a variable being used without
initialization:
drivers/scsi/lpfc/lpfc_nvme.c:2102:37: error: variable 'localport' is uninitialized when used here
[-Werror,-Wuninitialized]
lport = (struct lpfc_nvme_lport *)localport->private;
^~~~~~~~~
drivers/scsi/lpfc/lpfc_nvme.c:2059:38: note: initialize the variable 'localport' to silence this warning
struct nvme_fc_local_port *localport;
^
= NULL
1 error generated.
This is clearly in dead code, as the condition leading up to it is always
false when CONFIG_NVME_FC is disabled, and the variable is always
initialized when nvme_fc_register_localport() got called successfully.
Change the preprocessor conditional to the equivalent C construct, which
makes the code more readable and gets rid of the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 608f729c31 ]
Clang -Wuninitialized notices that on is_qla40XX we never allocate any DMA
memory in get_fw_boot_info() but attempt to free it anyway:
drivers/scsi/qla4xxx/ql4_os.c:5915:7: error: variable 'buf_dma' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
if (!(val & 0x07)) {
^~~~~~~~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5985:47: note: uninitialized use occurs here
dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma);
^~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5915:3: note: remove the 'if' if its condition is always true
if (!(val & 0x07)) {
^~~~~~~~~~~~~~~~~~~
drivers/scsi/qla4xxx/ql4_os.c:5885:20: note: initialize the variable 'buf_dma' to silence this warning
dma_addr_t buf_dma;
^
= 0
Skip the call to dma_free_coherent() here.
Fixes: 2a991c2159 ("[SCSI] qla4xxx: Boot from SAN support for open-iscsi")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ead7e8172 ]
If ohci-platform is runtime suspended, we can currently get an "imprecise
external abort" on reboot with ohci-platform loaded when PM runtime
is implemented for the SoC.
Let's fix this by adding PM runtime support to usb_hcd_platform_shutdown.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad092c0277 ]
If the specified rcuperf.perf_type is not in the rcu_perf_init()
function's perf_ops[] array, rcuperf prints some console messages and
then invokes rcu_perf_cleanup() to set state so that a future torture
test can run. However, rcu_perf_cleanup() also attempts to end the
test that didn't actually start, and in doing so relies on the value
of cur_ops, a value that is not particularly relevant in this case.
This can result in confusing output or even follow-on failures due to
attempts to use facilities that have not been properly initialized.
This commit therefore sets the value of cur_ops to NULL in this case and
inserts a check near the beginning of rcu_perf_cleanup(), thus avoiding
relying on an irrelevant cur_ops value.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 006c077041 ]
Linux reads MCG_CAP[Count] to find the number of MCA banks visible to a
CPU. Currently, this number is the same for all CPUs and a warning is
shown if there is a difference. The number of banks is overwritten with
the MCG_CAP[Count] value of each following CPU that boots.
According to the Intel SDM and AMD APM, the MCG_CAP[Count] value gives
the number of banks that are available to a "processor implementation".
The AMD BKDGs/PPRs further clarify that this value is per core. This
value has historically been the same for every core in the system, but
that is not an architectural requirement.
Future AMD systems may have different MCG_CAP[Count] values per core,
so the assumption that all CPUs will have the same MCG_CAP[Count] value
will no longer be valid.
Also, the first CPU to boot will allocate the struct mce_banks[] array
using the number of banks based on its MCG_CAP[Count] value. The machine
check handler and other functions use the global number of banks to
iterate and index into the mce_banks[] array. So it's possible to use an
out-of-bounds index on an asymmetric system where a following CPU sees a
MCG_CAP[Count] value greater than its predecessors.
Thus, allocate the mce_banks[] array to the maximum number of banks.
This will avoid the potential out-of-bounds index since the value of
mca_cfg.banks is capped to MAX_NR_BANKS.
Set the value of mca_cfg.banks equal to the max of the previous value
and the value for the current CPU. This way mca_cfg.banks will always
represent the max number of banks detected on any CPU in the system.
This will ensure that all CPUs will access all the banks that are
visible to them. A CPU that can access fewer than the max number of
banks will find the registers of the extra banks to be read-as-zero.
Furthermore, print the resulting number of MCA banks in use. Do this in
mcheck_late_init() so that the final value is printed after all CPUs
have been initialized.
Finally, get bank count from target CPU when doing injection with mce-inject
module.
[ bp: Remove out-of-bounds example, passify and cleanup commit message. ]
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20180727214009.78289-1-Yazen.Ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b813afae7a ]
If the specified rcutorture.torture_type is not in the rcu_torture_init()
function's torture_ops[] array, rcutorture prints some console messages
and then invokes rcu_torture_cleanup() to set state so that a future
torture test can run. However, rcu_torture_cleanup() also attempts to
end the test that didn't actually start, and in doing so relies on the
value of cur_ops, a value that is not particularly relevant in this case.
This can result in confusing output or even follow-on failures due to
attempts to use facilities that have not been properly initialized.
This commit therefore sets the value of cur_ops to NULL in this case
and inserts a check near the beginning of rcu_torture_cleanup(),
thus avoiding relying on an irrelevant cur_ops value.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f19501aa07 ]
There has been a lurking "TBD" in the machine check poll routine ever
since it was first split out from the machine check handler. The
potential issue is that the poll routine may have just begun a read from
the STATUS register in a machine check bank when the hardware logs an
error in that bank and signals a machine check.
That race used to be pretty small back when machine checks were
broadcast, but the addition of local machine check means that the poll
code could continue running and clear the error from the bank before the
local machine check handler on another CPU gets around to reading it.
Fix the code to be sure to only process errors that need to be processed
in the poll code, leaving other logged errors alone for the machine
check handler to find and process.
[ bp: Massage a bit and flip the "== 0" check to the usual !(..) test. ]
Fixes: b79109c3bb ("x86, mce: separate correct machine check poller and fatal exception handler")
Fixes: ed7290d0ee ("x86, mce: implement new status bits")
Reported-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Link: https://lkml.kernel.org/r/20190312170938.GA23035@agluck-desk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bbb1c318c ]
ipw->attr_memory and ipw->common_memory are assigned with the
return value of ioremap. ioremap may fail, but no checks
are enforced. The fix inserts the checks to avoid potential
NULL pointer dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
