[ Upstream commit d7b13edd4c ]
If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL,
so fwnode_handle_put() is a no-op.
Release the reference taken from a previous fwnode_graph_get_port_parent()
call instead.
Also handle fwnode_graph_get_port_parent() failures.
In order to fix these issues, add an error handling path to the function
and the needed gotos.
Fixes: ca50c197bd ("[media] v4l: fwnode: Support generic fwnode for parsing standardised properties")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f126ff7e40 ]
The supported ad5820 and ad5821 VCMs both use a single 16 bit register
which is written by sending 2 bytes with the data directly after sending
the i2c-client address.
The ad5823 OTOH has a more typical i2c / smbus device setup with multiple
8 bit registers where the first byte send after the i2c-client address is
the register address and the actual data only starts from the second byte
after the i2c-client address.
The ad5823 i2c_ and of_device_id-s was added at the same time as
the ad5821 ids with as rationale:
"""
Some camera modules also refer that AD5823 is a replacement of AD5820:
https://download.kamami.com/p564094-OV8865_DS.pdf
"""
The AD5823 may be an electrical and functional replacement of the AD5820,
but from a software pov it is not compatible at all and it is going to
need its own driver, drop its id from the ad5820 driver.
Fixes: b8bf73136b ("media: ad5820: Add support for ad5821 and ad5823")
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4a123d2e8 ]
The comma at the end of the line was leftover from an earlier refactor
of the _nfs4_pnfs_v3_ds_connect() function. This is technically valid C,
so the compilers didn't catch it, but if I'm understanding how it works
correctly it assigns the return value of rpc_clnt_add_xprtr() to
xprtdata.cred.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: a12f996d34 ("NFSv4/pNFS: Use connections to a DS that are all of the same protocol family")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5690eed941 ]
If the client sent a synchronous copy and the server replied with
ERR_OFFLOAD_NO_REQ indicating that it wants an asynchronous
copy instead, the client should retry with asynchronous copy.
Fixes: 539f57b3e0 ("NFS handle COPY ERR_OFFLOAD_NO_REQS")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f67b55b658 ]
Commit 64cfca85ba asserts the only valid return values for
nfs2/3_decode_dirent should not include -ENAMETOOLONG, but for a server
that sends a filename3 which exceeds MAXNAMELEN in a READDIR response the
client's behavior will be to endlessly retry the operation.
We could map -ENAMETOOLONG into -EBADCOOKIE, but that would produce
truncated listings without any error. The client should return an error
for this case to clearly assert that the server implementation must be
corrected.
Fixes: 64cfca85ba ("NFS: Return valid errors from nfs2/3_decode_dirent()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6372e2ee62 ]
The XDR specification in RFC 8881 looks like this:
struct device_addr4 {
layouttype4 da_layout_type;
opaque da_addr_body<>;
};
struct GETDEVICEINFO4resok {
device_addr4 gdir_device_addr;
bitmap4 gdir_notification;
};
union GETDEVICEINFO4res switch (nfsstat4 gdir_status) {
case NFS4_OK:
GETDEVICEINFO4resok gdir_resok4;
case NFS4ERR_TOOSMALL:
count4 gdir_mincount;
default:
void;
};
Looking at nfsd4_encode_getdeviceinfo() ....
When the client provides a zero gd_maxcount, then the Linux NFS
server implementation encodes the da_layout_type field and then
skips the da_addr_body field completely, proceeding directly to
encode gdir_notification field.
There does not appear to be an option in the specification to skip
encoding da_addr_body. Moreover, Section 18.40.3 says:
> If the client wants to just update or turn off notifications, it
> MAY send a GETDEVICEINFO operation with gdia_maxcount set to zero.
> In that event, if the device ID is valid, the reply's da_addr_body
> field of the gdir_device_addr field will be of zero length.
Since the layout drivers are responsible for encoding the
da_addr_body field, put this fix inside the ->encode_getdeviceinfo
methods.
Fixes: 9cf514ccfa ("nfsd: implement pNFS operations")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tom Haynes <loghyr@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de8d38cf44 ]
clang's static analysis warning: fs/lockd/mon.c: line 293, column 2:
Null pointer passed as 2nd argument to memory copy function.
Assuming 'hostname' is NULL and calling 'nsm_create_handle()', this will
pass NULL as 2nd argument to memory copy function 'memcpy()'. So return
NULL if 'hostname' is invalid.
Fixes: 77a3ef33e2 ("NSM: More clean up of nsm_get_handle()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1524773425 ]
Running generic/475(filesystem consistent tests after power cut) could
easily trigger unattached inode error while doing fsck:
Unattached zero-length inode 39405. Clear? no
Unattached inode 39405
Connect to /lost+found? no
Above inconsistence is caused by following process:
P1 P2
ext4_create
inode = ext4_new_inode_start_handle // itable records nlink=1
ext4_add_nondir
err = ext4_add_entry // ENOSPC
ext4_append
ext4_bread
ext4_getblk
ext4_map_blocks // returns ENOSPC
drop_nlink(inode) // won't be updated into disk inode
ext4_orphan_add(handle, inode)
ext4_orphan_file_add
ext4_journal_stop(handle)
jbd2_journal_commit_transaction // commit success
>> power cut <<
ext4_fill_super
ext4_load_and_init_journal // itable records nlink=1
ext4_orphan_cleanup
ext4_process_orphan
if (inode->i_nlink) // true, inode won't be deleted
Then, allocated inode will be reserved on disk and corresponds to no
dentries, so e2fsck reports 'unattached inode' problem.
The problem won't happen if orphan file feature is disabled, because
ext4_orphan_add() will update disk inode in orphan list mode. There
are several places not updating disk inode while putting inode into
orphan area, such as ext4_add_nondir(), ext4_symlink() and whiteout
in ext4_rename(). Fix it by updating inode into disk in all error
branches of these places.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217605
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230628132011.650383-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c37b6908f7 ]
fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both
PCI and VIO buses. struct notifier_block is a linked list node, so this
causes any notifiers later registered to either bus type to also be
registered to the other since they share the same node.
This causes issues in (at least) the vgaarb code, which registers a
notifier for PCI buses. pci_notify() ends up being called on a vio
device, converted with to_pci_dev() even though it's not a PCI device,
and finally makes a bad access in vga_arbiter_add_pci_device() as
discovered with KASAN:
BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00
Read of size 4 at addr c000000264c26fdc by task swapper/0/1
Call Trace:
dump_stack_lvl+0x1bc/0x2b8 (unreliable)
print_report+0x3f4/0xc60
kasan_report+0x244/0x698
__asan_load4+0xe8/0x250
vga_arbiter_add_pci_device+0x60/0xe00
pci_notify+0x88/0x444
notifier_call_chain+0x104/0x320
blocking_notifier_call_chain+0xa0/0x140
device_add+0xac8/0x1d30
device_register+0x58/0x80
vio_register_device_node+0x9ac/0xce0
vio_bus_scan_register_devices+0xc4/0x13c
__machine_initcall_pseries_vio_device_init+0x94/0xf0
do_one_initcall+0x12c/0xaa8
kernel_init_freeable+0xa48/0xba8
kernel_init+0x64/0x400
ret_from_kernel_thread+0x5c/0x64
Fix this by creating separate notifier_block structs for each bus type.
Fixes: d6b9a81b2a ("powerpc: IOMMU fault injection")
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Add #ifdef to fix CONFIG_IBMVIO=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230322035322.328709-1-ruscur@russell.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b45fcb2d ]
This allocation should use the passed in GFP_ flags instead of
GFP_KERNEL. One places where this matters is in filelayout_pg_init_write()
which uses GFP_NOFS as the allocation flags.
Fixes: 5c83746a0c ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eac030b22e ]
lppaca_shared_proc() takes a pointer to the lppaca which is typically
accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads
to checking if preemption is enabled, for example:
BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693
caller is lparcfg_data+0x408/0x19a0
CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2
Call Trace:
dump_stack_lvl+0x154/0x200 (unreliable)
check_preemption_disabled+0x214/0x220
lparcfg_data+0x408/0x19a0
...
This isn't actually a problem however, as it does not matter which
lppaca is accessed, the shared proc state will be the same.
vcpudispatch_stats_procfs_init() already works around this by disabling
preemption, but the lparcfg code does not, erroring any time
/proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.
Instead of disabling preemption on the caller side, rework
lppaca_shared_proc() to not take a pointer and instead directly access
the lppaca, bypassing any potential preemption checks.
Fixes: f13c13a005 ("powerpc: Stop using non-architected shared_proc field in lppaca")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rework to avoid needing a definition in paca.h and lppaca.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1aa0006676 ]
By adding a forward declaration for struct lppaca we can untangle paca.h
and lppaca.h. Also move get_lppaca() into lppaca.h for consistency.
Add includes of lppaca.h to some files that need it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-3-mpe@ellerman.id.au
Stable-dep-of: eac030b22e ("powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a37beefbde ]
Factor out this pattern:
if (!pci->ops || !pci->ops->start_link)
return -EINVAL;
return pci->ops->start_link(pci);
into a new dw_pcie_start_link() wrapper and do the same for the stop_link()
method.
Note that dw_pcie_ep_start() previously returned -EINVAL if there was no
platform start_link() method, which didn't make much sense since that is
not an error. It will now return 0 in that case.
As a side-effect, drop the empty start_link() and dummy dw_pcie_ops
instances from the generic DW PCIe and Layerscape EP platform drivers.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143428.8334-14-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 17cf8661ee ("PCI: layerscape: Add workaround for lost link capabilities during reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7189576e8a ]
Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control. And in
the case of upstream bridge, the driver does not even own the device it's
changing the registers for.
Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 8a7cd27679 ("drm/radeon/cik: add support for pcie gen1/2/3 switching")
Fixes: b9d305dfb6 ("drm/radeon: implement pcie gen2/3 support for SI")
Link: https://lore.kernel.org/r/20230717120503.15276-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34daf445f8 ]
CC arch/powerpc/perf/core-fsl-emb.o
arch/powerpc/perf/core-fsl-emb.c:675:6: error: no previous prototype for 'hw_perf_event_setup' [-Werror=missing-prototypes]
675 | void hw_perf_event_setup(int cpu)
| ^~~~~~~~~~~~~~~~~~~
Looks like fsl_emb was completely missed by commit 3f6da39053 ("perf:
Rework and fix the arch CPU-hotplug hooks")
So, apply same changes as commit 3f6da39053 ("perf: Rework and fix
the arch CPU-hotplug hooks") then commit 57ecde42cc ("powerpc/perf:
Convert book3s notifier to state machine callbacks")
While at it, also fix following error:
arch/powerpc/perf/core-fsl-emb.c: In function 'perf_event_interrupt':
arch/powerpc/perf/core-fsl-emb.c:648:13: error: variable 'found' set but not used [-Werror=unused-but-set-variable]
648 | int found = 0;
| ^~~~~
Fixes: 3f6da39053 ("perf: Rework and fix the arch CPU-hotplug hooks")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/603e1facb32608f88f40b7d7b9094adc50e7b2dc.1692349125.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1eb75e0df ]
In case fadump_reserve_mem() fails to reserve memory, the
reserve_dump_area_size variable will retain the reserve area size. This
will lead to /sys/kernel/fadump/mem_reserved node displaying an incorrect
memory reserved by fadump.
To fix this problem, reserve dump area size variable is set to 0 if fadump
failed to reserve memory.
Fixes: 8255da95e5 ("powerpc/fadump: release all the memory above boot memory size")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230704050715.203581-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd24e2a60a ]
Fix an information leak where an uninitialized hole in struct
vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace.
The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as
shown in this pahole(1) output:
struct vfio_iommu_type1_info_cap_migration {
struct vfio_info_cap_header header; /* 0 8 */
__u32 flags; /* 8 4 */
/* XXX 4 bytes hole, try to pack */
__u64 pgsize_bitmap; /* 16 8 */
__u64 max_dirty_bitmap_size; /* 24 8 */
/* size: 32, cachelines: 1, members: 4 */
/* sum members: 28, holes: 1, sum holes: 4 */
/* last cacheline: 32 bytes */
};
The cap_mig variable is filled in without initializing the hole:
static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
struct vfio_info_cap *caps)
{
struct vfio_iommu_type1_info_cap_migration cap_mig;
cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION;
cap_mig.header.version = 1;
cap_mig.flags = 0;
/* support minimum pgsize */
cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap);
cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX;
return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
}
The structure is then copied to a temporary location on the heap. At this point
it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace
later:
int vfio_info_add_capability(struct vfio_info_cap *caps,
struct vfio_info_cap_header *cap, size_t size)
{
struct vfio_info_cap_header *header;
header = vfio_info_cap_add(caps, size, cap->id, cap->version);
if (IS_ERR(header))
return PTR_ERR(header);
memcpy(header + 1, cap + 1, size - sizeof(*header));
return 0;
}
This issue was found by code inspection.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Fixes: ad721705d0 ("vfio iommu: Add migration capability to report supported features")
Link: https://lore.kernel.org/r/20230801155352.1391945-1-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a9dd8f292 ]
With skiboot_defconfig, Clang reports:
CC arch/powerpc/mm/book3s64/radix_tlb.o
arch/powerpc/mm/book3s64/radix_tlb.c:419:20: error: unused function '_tlbie_pid_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
^
arch/powerpc/mm/book3s64/radix_tlb.c:663:20: error: unused function '_tlbie_va_range_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_va_range_lpid(unsigned long start, unsigned long end,
^
This is because those functions are only called from functions
enclosed in a #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
Move below functions inside that #ifdef
* __tlbie_pid_lpid(unsigned long pid,
* __tlbie_va_lpid(unsigned long va, unsigned long pid,
* fixup_tlbie_pid_lpid(unsigned long pid, unsigned long lpid)
* _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
* fixup_tlbie_va_range_lpid(unsigned long va,
* __tlbie_va_range_lpid(unsigned long start, unsigned long end,
* _tlbie_va_range_lpid(unsigned long start, unsigned long end,
Fixes: f0c6fbbb90 ("KVM: PPC: Book3S HV: Add support for H_RPT_INVALIDATE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307260802.Mjr99P5O-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3d72efd39f986ee939d068af69fdce28bd600766.1691568093.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dd432d985 ]
Reconfiguring the clock divider to the exact same value is observed
on an i.MX8MN to often cause a longer than usual clock pause, probably
because the divider restarts counting whenever the register is rewritten.
This issue doesn't show up normally, because the clock framework will
take care to not call set_rate when the clock rate is the same.
However, when we reconfigure an upstream clock, the common code will
call set_rate with the newly calculated rate on all children, e.g.:
- sai5 is running normally and divides Audio PLL out by 16.
- Audio PLL rate is increased by 32Hz (glitch-free kdiv change)
- rates for children are recalculated and rates are set recursively
- imx8m_clk_composite_divider_set_rate(sai5) is called with
32/16 = 2Hz more
- imx8m_clk_composite_divider_set_rate computes same divider as before
- divider register is written, so it restarts counting from zero and
MCLK is briefly paused, so instead of e.g. 40ns, MCLK is low for 120ns.
Some external clock consumers can be upset by such unexpected clock pauses,
so let's make sure we only rewrite the divider value when the value to be
written is actually different.
Fixes: d3ff972813 ("clk: imx: Add imx composite clock")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230807082201.2332746-1-a.fatoum@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e09060b3b6 ]
Don't assume that the device is fully under the control of ASPM and use RMW
capability accessors which do proper locking to avoid losing concurrent
updates to the register values.
If configuration fails in pcie_aspm_configure_common_clock(), the
function attempts to restore the old PCI_EXP_LNKCTL_CCC settings. Store
only the old PCI_EXP_LNKCTL_CCC bit for the relevant devices rather
than the content of the whole LNKCTL registers. It aligns better with
how pcie_lnkctl_clear_and_set() expects its parameter and makes the
code more obvious to understand.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 2a42d9dba7 ("PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch")
Fixes: 7d715a6c1a ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230717120503.15276-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60c672b7f2 ]
ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce53ad81ed ]
Current igen6_edac checks for pending errors before the registration
of the error handler. However, there is a possibility that the error
occurs during the registration process, leading to unhandled pending
errors and no future error events. This issue can be reproduced by
repeatedly injecting errors during the loading of the igen6_edac.
Fix this issue by moving the pending error handler after the registration
of the error handler, ensuring that no pending errors are left unhandled.
Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Reported-by: Ee Wey Lim <ee.wey.lim@intel.com>
Tested-by: Ee Wey Lim <ee.wey.lim@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230725080427.23883-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8d72e32e1 ]
The adapter scan ssif_info_find() sets info->adapter_name if the adapter
info came from SMBIOS, as it's not set in that case. However, this
function can be called more than once, and it will leak the adapter name
if it had already been set. So check for NULL before setting it.
Fixes: c4436c9149 ("ipmi_ssif: avoid registering duplicate ssif interface")
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67de40c9df ]
Before committing 79597c8bf6, *rac97 always be NULL if there is
an error. When error happens, make sure *rac97 is NULL is safer.
For examble, in snd_vortex_mixer():
err = snd_ac97_mixer(pbus, &ac97, &vortex->codec);
vortex->isquad = ((vortex->codec == NULL) ?
0 : (vortex->codec->ext_id&0x80));
If error happened but vortex->codec isn't NULL, this may cause some
problems.
Move the judgement order to be clearer and better.
Fixes: 79597c8bf6 ("ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20230823025212.1000961-1-suhui@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9515ff4fb ]
When of_overlay_fdt_apply() fails, the changeset may be partially
applied, and the caller is still expected to call of_overlay_remove() to
clean up this partial state.
However, of_overlay_apply() calls of_resolve_phandles() before
init_overlay_changeset(). Hence if the overlay fails to apply due to an
unresolved symbol, the overlay_changeset.cset.entries list is still
uninitialized, and cleanup will crash with a NULL-pointer dereference in
overlay_removal_is_ok().
Fix this by moving the call to of_changeset_init() from
init_overlay_changeset() to of_overlay_fdt_apply(), where all other
early initialization is done.
Fixes: f948d6d8b7 ("of: overlay: avoid race condition between applying multiple overlays")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4f1d6d74b61cba2599026adb6d1948ae559ce91f.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc22b5407e ]
When a bio is split by md raid0, the newly created bio will not be tracked
by md for I/O accounting. Only the portion of I/O still assigned to the
original bio which was reduced by the split will be accounted for. This
results in md iostat data sometimes showing I/O values far below the actual
amount of data being sent through md.
md_account_bio() needs to be called for all bio generated by the bio split.
A simple example of the issue was generated using a raid0 device on partitions
to the same device. Since all raid0 I/O then goes to one device, it makes it
easy to see a gap between the md device and its sd storage. Reading an lvm
device on top of the md device, the iostat output (some 0 columns and extra
devices removed to make the data more compact) was:
Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read
md2 0.00 0.00 0.00 0.00 0
sde 0.00 0.00 0.00 0.00 0
md2 1364.00 411496.00 0.00 0.00 411496
sde 1734.00 646144.00 0.00 0.00 646144
md2 1699.00 510680.00 0.00 0.00 510680
sde 2155.00 802784.00 0.00 0.00 802784
md2 803.00 241480.00 0.00 0.00 241480
sde 1016.00 377888.00 0.00 0.00 377888
md2 0.00 0.00 0.00 0.00 0
sde 0.00 0.00 0.00 0.00 0
I/O was generated doing large direct I/O reads (12M) with dd to a linear
lvm volume on top of the 4 leg raid0 device.
The md2 reads were showing as roughly 2/3 of the reads to the sde device
containing all of md2's raid partitions. The sum of reads to sde was
1826816 kB, which was the expected amount as it was the amount read by
dd. With the patch, the total reads from md will match the reads from
sde and be consistent with the amount of I/O generated.
Fixes: 10764815ff ("md: add io accounting for raid0 and raid5")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230816181433.13289-1-djeffery@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 319ff40a54 ]
Commit f00d7c85be ("md/raid0: fix up bio splitting.") among other
things changed how bio that needs to be split is submitted. Before this
commit, we have split the bio, mapped and submitted each part. After
this commit, we map only the first part of the split bio and submit the
second part unmapped. Due to bio sorting in __submit_bio_noacct() this
results in the following request ordering:
9,0 18 1181 0.525037895 15995 Q WS 1479315464 + 63392
Split off chunk-sized (1024 sectors) request:
9,0 18 1182 0.629019647 15995 X WS 1479315464 / 1479316488
Request is unaligned to the chunk so it's split in
raid0_make_request(). This is the first part mapped and punted to
bio_list:
8,0 18 7053 0.629020455 15995 A WS 739921928 + 1016 <- (9,0) 1479315464
Now raid0_make_request() returns, second part is postponed on
bio_list. __submit_bio_noacct() resorts the bio_list, mapped request
is submitted to the underlying device:
8,0 18 7054 0.629022782 15995 G WS 739921928 + 1016
Now we take another request from the bio_list which is the remainder
of the original huge request. Split off another chunk-sized bit from
it and the situation repeats:
9,0 18 1183 0.629024499 15995 X WS 1479316488 / 1479317512
8,16 18 6998 0.629025110 15995 A WS 739921928 + 1016 <- (9,0) 1479316488
8,16 18 6999 0.629026728 15995 G WS 739921928 + 1016
...
9,0 18 1184 0.629032940 15995 X WS 1479317512 / 1479318536 [libnetacq-write]
8,0 18 7059 0.629033294 15995 A WS 739922952 + 1016 <- (9,0) 1479317512
8,0 18 7060 0.629033902 15995 G WS 739922952 + 1016
...
This repeats until we consume the whole original huge request. Now we
finally get to processing the second parts of the split off requests
(in reverse order):
8,16 18 7181 0.629161384 15995 A WS 739952640 + 8 <- (9,0) 1479377920
8,0 18 7239 0.629162140 15995 A WS 739952640 + 8 <- (9,0) 1479376896
8,16 18 7186 0.629163881 15995 A WS 739951616 + 8 <- (9,0) 1479375872
8,0 18 7242 0.629164421 15995 A WS 739951616 + 8 <- (9,0) 1479374848
...
I guess it is obvious that this IO pattern is extremely inefficient way
to perform sequential IO. It also makes bio_list to grow to rather long
lengths.
Change raid0_make_request() to map both parts of the split bio. Since we
know we are provided with at most chunk-sized bios, we will always need
to split the incoming bio at most once.
Fixes: f00d7c85be ("md/raid0: fix up bio splitting.")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-2-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
