ptrace_stop() does preempt_enable_no_resched() to avoid the preemption,
but after that cgroup_enter_frozen() does spin_lock/unlock and this adds
another preemption point.
Reported-and-tested-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Fixes: 76f969e894 ("cgroup: cgroup v2 freezer")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Change-Id: Ic53e0f2d6624b0bb90817b0c57060fb7db971348
(cherry picked from commit 937c6b27c7)
Bug: 154548692
Signed-off-by: Marco Ballesio <balejs@google.com>
If a new child cgroup is created in the frozen cgroup hierarchy
(one or more of ancestor cgroups is frozen), the CGRP_FREEZE cgroup
flag should be set. Otherwise if a process will be attached to the
child cgroup, it won't become frozen.
The problem can be reproduced with the test_cgfreezer_mkdir test.
This is the output before this patch:
~/test_freezer
ok 1 test_cgfreezer_simple
ok 2 test_cgfreezer_tree
ok 3 test_cgfreezer_forkbomb
Cgroup /sys/fs/cgroup/cg_test_mkdir_A/cg_test_mkdir_B isn't frozen
not ok 4 test_cgfreezer_mkdir
ok 5 test_cgfreezer_rmdir
ok 6 test_cgfreezer_migrate
ok 7 test_cgfreezer_ptrace
ok 8 test_cgfreezer_stopped
ok 9 test_cgfreezer_ptraced
ok 10 test_cgfreezer_vfork
And with this patch:
~/test_freezer
ok 1 test_cgfreezer_simple
ok 2 test_cgfreezer_tree
ok 3 test_cgfreezer_forkbomb
ok 4 test_cgfreezer_mkdir
ok 5 test_cgfreezer_rmdir
ok 6 test_cgfreezer_migrate
ok 7 test_cgfreezer_ptrace
ok 8 test_cgfreezer_stopped
ok 9 test_cgfreezer_ptraced
ok 10 test_cgfreezer_vfork
Reported-by: Mark Crossen <mcrossen@fb.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Fixes: 76f969e894 ("cgroup: cgroup v2 freezer")
Cc: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Tejun Heo <tj@kernel.org>
Change-Id: I6ba7b8dec5600e78bb7448f03fd97a9b43838fa0
(cherry picked from commit 97a6136983)
Bug: 154548692
Signed-off-by: Marco Ballesio <balejs@google.com>
Alex Xu reported a regression in strace, caused by the introduction of
the cgroup v2 freezer. The regression can be reproduced by stracing
the following simple program:
#include <unistd.h>
int main() {
write(1, "a", 1);
return 0;
}
An attempt to run strace ./a.out leads to the infinite loop:
[ pre-main omitted ]
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
[ repeats forever ]
The problem occurs because the traced task leaves ptrace_stop()
(and the signal handling loop) with the frozen bit set. So let's
call cgroup_leave_frozen(true) unconditionally after sleeping
in ptrace_stop().
With this patch applied, strace works as expected:
[ pre-main omitted ]
write(1, "a", 1) = 1
exit_group(0) = ?
+++ exited with 0 +++
Reported-by: Alex Xu <alex_y_xu@yahoo.ca>
Fixes: 76f969e894 ("cgroup: cgroup v2 freezer")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Change-Id: If644b15ead36ce13f0c2c3dd57eebe3658e3edf7
(cherry picked from commit 05b2892637)
Bug: 154548692
Signed-off-by: Marco Ballesio <balejs@google.com>
Cgroup v1 implements the freezer controller, which provides an ability
to stop the workload in a cgroup and temporarily free up some
resources (cpu, io, network bandwidth and, potentially, memory)
for some other tasks. Cgroup v2 lacks this functionality.
This patch implements freezer for cgroup v2.
Cgroup v2 freezer tries to put tasks into a state similar to jobctl
stop. This means that tasks can be killed, ptraced (using
PTRACE_SEIZE*), and interrupted. It is possible to attach to
a frozen task, get some information (e.g. read registers) and detach.
It's also possible to migrate a frozen tasks to another cgroup.
This differs cgroup v2 freezer from cgroup v1 freezer, which mostly
tried to imitate the system-wide freezer. However uninterruptible
sleep is fine when all tasks are going to be frozen (hibernation case),
it's not the acceptable state for some subset of the system.
Cgroup v2 freezer is not supporting freezing kthreads.
If a non-root cgroup contains kthread, the cgroup still can be frozen,
but the kthread will remain running, the cgroup will be shown
as non-frozen, and the notification will not be delivered.
* PTRACE_ATTACH is not working because non-fatal signal delivery
is blocked in frozen state.
There are some interface differences between cgroup v1 and cgroup v2
freezer too, which are required to conform the cgroup v2 interface
design principles:
1) There is no separate controller, which has to be turned on:
the functionality is always available and is represented by
cgroup.freeze and cgroup.events cgroup control files.
2) The desired state is defined by the cgroup.freeze control file.
Any hierarchical configuration is allowed.
3) The interface is asynchronous. The actual state is available
using cgroup.events control file ("frozen" field). There are no
dedicated transitional states.
4) It's allowed to make any changes with the cgroup hierarchy
(create new cgroups, remove old cgroups, move tasks between cgroups)
no matter if some cgroups are frozen.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com>
Cc: kernel-team@fb.com
Change-Id: I3404119678cbcd7410aa56e9334055cee79d02fa
(cherry picked from commit 76f969e894)
cgroup-defs.h: use the struct cgroup_freezer_state and the
freezer field from definitions in I6221a975c04f06249a4f8d693852776ae08a8d8e
sched.h: use the frozen field defined in
I6221a975c04f06249a4f8d693852776ae08a8d8e
Bug: 154548692
Signed-off-by: Marco Ballesio <balejs@google.com>
The helper is identical to the existing cgroup_task_count()
except it doesn't take the css_set_lock by itself, assuming
that the caller does.
Also, move cgroup_task_count() implementation into
kernel/cgroup/cgroup.c, as there is nothing specific to cgroup v1.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Change-Id: Iaa9085d2375d395a051543d2555389213c2892d6
(cherry picked from commit aade7f9efb)
Bug: 154548692
Signed-off-by: Marco Ballesio <balejs@google.com>
Freezer.c will contain an implementation of cgroup v2 freezer,
so let's rename the v1 freezer to avoid naming conflicts.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
(cherry picked from commit 50943f3e13)
Bug: 154548692
Signed-off-by: Marco Ballesio <balejs@google.com>
Change-Id: I7fa1223c841ee70a0c93fa9cc1ca51a63f53d457
The callers of cgroup_migrate_prepare_dst() correctly call
cgroup_migrate_finish() for success and failure cases both. No need to
call it in cgroup_migrate_prepare_dst() in failure case.
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Change-Id: I785d7ab70a42b1b79aea9852bb14ba5abefcaa9b
(cherry picked from commit d6e486ee0e)
Bug: 154548692
Signed-off-by: Marco Ballesio <balejs@google.com>
* make the reference from superblock to cgroup_root counting -
do cgroup_put() in cgroup_kill_sb() whether we'd done
percpu_ref_kill() or not; matching grab is done when we allocate
a new root. That gives the same refcounting rules for all callers
of cgroup_do_mount() - a reference to cgroup_root has been grabbed
by caller and it either is transferred to new superblock or dropped.
* have cgroup_kill_sb() treat an already killed refcount as "just
don't bother killing it, then".
* after successful cgroup_do_mount() have cgroup1_mount() recheck
if we'd raced with mount/umount from somebody else and cgroup_root
got killed. In that case we drop the superblock and bugger off
with -ERESTARTSYS, same as if we'd found it in the list already
dying.
* don't bother with delayed initialization of refcount - it's
unreliable and not needed. No need to prevent attempts to bump
the refcount if we find cgroup_root of another mount in progress -
sget will reuse an existing superblock just fine and if the
other sb manages to die before we get there, we'll catch
that immediately after cgroup_do_mount().
* don't bother with kernfs_pin_sb() - no need for doing that
either.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Change-Id: I8e088dfc516b76c42d9d4b34db7f49f0cebc5414
(cherry picked from commit 35ac118424)
Bug: 154548692
Signed-off-by: Marco Ballesio <balejs@google.com>
It can be useful to inhibit all cgroup1 hierarchies especially during
transition and for debugging. cgroup_no_v1 can block hierarchies with
controllers which leaves out the named hierarchies. Expand it to
cover the named hierarchies so that "cgroup_no_v1=all,named" disables
all cgroup1 hierarchies.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Marcin Pawlowski <mpawlowski@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Change-Id: Ibd093dd9b70d15402a21db3c1ef56005ebc7f99e
(cherry picked from commit 3fc9c12d27)
Bug: 154548692
Signed-off-by: Marco Ballesio <balejs@google.com>
WARN_ON() already contains an unlikely(), so it's not necessary to use
unlikely.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Change-Id: I092c0aae2a06b13d3fc9ecfbb24ab3e8d10235f6
(cherry picked from commit 4d9ebbe2b0)
Bug: 154548692
Signed-off-by: Marco Ballesio <balejs@google.com>
Changes in 4.19.142
drm/vgem: Replace opencoded version of drm_gem_dumb_map_offset()
perf probe: Fix memory leakage when the probe point is not found
khugepaged: khugepaged_test_exit() check mmget_still_valid()
khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
btrfs: export helpers for subvolume name/id resolution
btrfs: don't show full path of bind mounts in subvol=
btrfs: Move free_pages_out label in inline extent handling branch in compress_file_range
btrfs: inode: fix NULL pointer dereference if inode doesn't need compression
btrfs: sysfs: use NOFS for device creation
romfs: fix uninitialized memory leak in romfs_dev_read()
kernel/relay.c: fix memleak on destroy relay channel
mm: include CMA pages in lowmem_reserve at boot
mm, page_alloc: fix core hung in free_pcppages_bulk()
ext4: fix checking of directory entry validity for inline directories
jbd2: add the missing unlock_buffer() in the error path of jbd2_write_superblock()
scsi: zfcp: Fix use-after-free in request timeout handlers
drm/amd/display: fix pow() crashing when given base 0
kthread: Do not preempt current task if it is going to call schedule()
spi: Prevent adding devices below an unregistering controller
scsi: ufs: Add DELAY_BEFORE_LPM quirk for Micron devices
scsi: target: tcmu: Fix crash in tcmu_flush_dcache_range on ARM
media: budget-core: Improve exception handling in budget_register()
rtc: goldfish: Enable interrupt in set_alarm() when necessary
media: vpss: clean up resources in init
Input: psmouse - add a newline when printing 'proto' by sysfs
m68knommu: fix overwriting of bits in ColdFire V3 cache control
svcrdma: Fix another Receive buffer leak
xfs: fix inode quota reservation checks
jffs2: fix UAF problem
ceph: fix use-after-free for fsc->mdsc
cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0
scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases
virtio_ring: Avoid loop when vq is broken in virtqueue_poll
tools/testing/selftests/cgroup/cgroup_util.c: cg_read_strcmp: fix null pointer dereference
xfs: Fix UBSAN null-ptr-deref in xfs_sysfs_init
alpha: fix annotation of io{read,write}{16,32}be()
fs/signalfd.c: fix inconsistent return codes for signalfd4
ext4: fix potential negative array index in do_split()
ext4: don't allow overlapping system zones
ASoC: q6routing: add dummy register read/write function
i40e: Set RX_ONLY mode for unicast promiscuous on VLAN
i40e: Fix crash during removing i40e driver
net: fec: correct the error path for regulator disable in probe
bonding: show saner speed for broadcast mode
bonding: fix a potential double-unregister
s390/runtime_instrumentation: fix storage key handling
s390/ptrace: fix storage key handling
ASoC: msm8916-wcd-analog: fix register Interrupt offset
ASoC: intel: Fix memleak in sst_media_open
vfio/type1: Add proper error unwind for vfio_iommu_replay()
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kconfig: qconf: do not limit the pop-up menu to the first row
kconfig: qconf: fix signal connection to invalid slots
efi: avoid error message when booting under Xen
Fix build error when CONFIG_ACPI is not set/enabled:
RDMA/bnxt_re: Do not add user qps to flushlist
afs: Fix NULL deref in afs_dynroot_depopulate()
bonding: fix active-backup failover for current ARP slave
net: ena: Prevent reset after device destruction
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
net: dsa: b53: check for timeout
powerpc/pseries: Do not initiate shutdown when system is running on UPS
efi: add missed destroy_workqueue when efisubsys_init fails
epoll: Keep a reference on files added to the check list
do_epoll_ctl(): clean the failure exits up a bit
mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible
xen: don't reschedule in preemption off sections
clk: Evict unregistered clks from parent caches
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
Linux 4.19.142
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ibfe4a0a4249f76ab35076f4b003e32cd6f9788a5
commit b5331379bc upstream.
When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():
| BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394
| in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper
| INFO: lockdep is turned off.
| CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1
| Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
| Call trace:
| dump_backtrace+0x0/0x284
| show_stack+0x1c/0x28
| dump_stack+0xf0/0x1a4
| ___might_sleep+0x2bc/0x2cc
| unmap_stage2_range+0x160/0x1ac
| kvm_unmap_hva_range+0x1a0/0x1c8
| kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8
| __mmu_notifier_invalidate_range_start+0x218/0x31c
| mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0
| __oom_reap_task_mm+0x128/0x268
| oom_reap_task+0xac/0x298
| oom_reaper+0x178/0x17c
| kthread+0x1e4/0x1fc
| ret_from_fork+0x10/0x30
Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we
only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier
flags.
Cc: <stable@vger.kernel.org>
Fixes: 8b3405e345 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-3-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[will: Backport to 4.19; use 'blockable' instead of non-existent MMU_NOTIFIER_RANGE_BLOCKABLE flag]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdfe7cbd58 upstream.
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[will: Backport to 4.19; use 'blockable' instead of non-existent range flags]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdcf1dc253 upstream.
We leave a dangling pointer in each clk_core::parents array that has an
unregistered clk as a potential parent when that clk_core pointer is
freed by clk{_hw}_unregister(). It is impossible for the true parent of
a clk to be set with clk_set_parent() once the dangling pointer is left
in the cache because we compare parent pointers in
clk_fetch_parent_index() instead of checking for a matching clk name or
clk_hw pointer.
Before commit ede7785847 ("clk: Remove global clk traversal on fetch
parent index"), we would check clk_hw pointers, which has a higher
chance of being the same between registration and unregistration, but it
can still be allocated and freed by the clk provider. In fact, this has
been a long standing problem since commit da0f0b2c3a ("clk: Correct
lookup logic in clk_fetch_parent_index()") where we stopped trying to
compare clk names and skipped over entries in the cache that weren't
NULL.
There are good (performance) reasons to not do the global tree lookup in
cases where the cache holds dangling pointers to parents that have been
unregistered. Let's take the performance hit on the uncommon
registration path instead. Loop through all the clk_core::parents arrays
when a clk is unregistered and set the entry to NULL when the parent
cache entry and clk being unregistered are the same pointer. This will
fix this problem and avoid the overhead for the "normal" case.
Based on a patch by Bjorn Andersson.
Fixes: da0f0b2c3a ("clk: Correct lookup logic in clk_fetch_parent_index()")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190828181959.204401-1-sboyd@kernel.org
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For support of long running hypercalls xen_maybe_preempt_hcall() is
calling cond_resched() in case a hypercall marked as preemptible has
been interrupted.
Normally this is no problem, as only hypercalls done via some ioctl()s
are marked to be preemptible. In rare cases when during such a
preemptible hypercall an interrupt occurs and any softirq action is
started from irq_exit(), a further hypercall issued by the softirq
handler will be regarded to be preemptible, too. This might lead to
rescheduling in spite of the softirq handler potentially having set
preempt_disable(), leading to splats like:
BUG: sleeping function called from invalid context at drivers/xen/preempt.c:37
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 20775, name: xl
INFO: lockdep is turned off.
CPU: 1 PID: 20775 Comm: xl Tainted: G D W 5.4.46-1_prgmr_debug.el7.x86_64 #1
Call Trace:
<IRQ>
dump_stack+0x8f/0xd0
___might_sleep.cold.76+0xb2/0x103
xen_maybe_preempt_hcall+0x48/0x70
xen_do_hypervisor_callback+0x37/0x40
RIP: e030:xen_hypercall_xen_version+0xa/0x20
Code: ...
RSP: e02b:ffffc900400dcc30 EFLAGS: 00000246
RAX: 000000000004000d RBX: 0000000000000200 RCX: ffffffff8100122a
RDX: ffff88812e788000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffffff83ee3ad0 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffff8881824aa0b0
R13: 0000000865496000 R14: 0000000865496000 R15: ffff88815d040000
? xen_hypercall_xen_version+0xa/0x20
? xen_force_evtchn_callback+0x9/0x10
? check_events+0x12/0x20
? xen_restore_fl_direct+0x1f/0x20
? _raw_spin_unlock_irqrestore+0x53/0x60
? debug_dma_sync_single_for_cpu+0x91/0xc0
? _raw_spin_unlock_irqrestore+0x53/0x60
? xen_swiotlb_sync_single_for_cpu+0x3d/0x140
? mlx4_en_process_rx_cq+0x6b6/0x1110 [mlx4_en]
? mlx4_en_poll_rx_cq+0x64/0x100 [mlx4_en]
? net_rx_action+0x151/0x4a0
? __do_softirq+0xed/0x55b
? irq_exit+0xea/0x100
? xen_evtchn_do_upcall+0x2c/0x40
? xen_do_hypervisor_callback+0x29/0x40
</IRQ>
? xen_hypercall_domctl+0xa/0x20
? xen_hypercall_domctl+0x8/0x20
? privcmd_ioctl+0x221/0x990 [xen_privcmd]
? do_vfs_ioctl+0xa5/0x6f0
? ksys_ioctl+0x60/0x90
? trace_hardirqs_off_thunk+0x1a/0x20
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x62/0x250
? entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix that by testing preempt_count() before calling cond_resched().
In kernel 5.8 this can't happen any more due to the entry code rework
(more than 100 patches, so not a candidate for backporting).
The issue was introduced in kernel 4.3, so this patch should go into
all stable kernels in [4.3 ... 5.7].
Reported-by: Sarah Newman <srn@prgmr.com>
Fixes: 0fa2f5cb2b ("sched/preempt, xen: Use need_resched() instead of should_resched()")
Cc: Sarah Newman <srn@prgmr.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Chris Brannon <cmb@prgmr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75802ca663 upstream.
This is found by code observation only.
Firstly, the worst case scenario should assume the whole range was covered
by pmd sharing. The old algorithm might not work as expected for ranges
like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the
expected range should be (0, 2g).
Since at it, remove the loop since it should not be required. With that,
the new code should be faster too when the invalidating range is huge.
Mike said:
: With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only
: adjust to (0, 1g+2m) which is incorrect.
:
: We should cc stable. The original reason for adjusting the range was to
: prevent data corruption (getting wrong page). Since the range is not
: always adjusted correctly, the potential for corruption still exists.
:
: However, I am fairly confident that adjust_range_if_pmd_sharing_possible
: is only gong to be called in two cases:
:
: 1) for a single page
: 2) for range == entire vma
:
: In those cases, the current code should produce the correct results.
:
: To be safe, let's just cc stable.
Fixes: 017b1660df ("mm: migration: fix migration of huge PMD shared pages")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9ed4a6560 upstream.
When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.
However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90a9b102ed upstream.
As per PAPR we have to look for both EPOW sensor value and event
modifier to identify the type of event and take appropriate action.
In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes":
SYSTEM_SHUTDOWN 3
The system must be shut down. An EPOW-aware OS logs the EPOW error
log information, then schedules the system to be shut down to begin
after an OS defined delay internal (default is 10 minutes.)
Then in section 10.3.2.2.8 there is table 146 "Platform Event Log
Format, Version 6, EPOW Section", which includes the "EPOW Event
Modifier":
For EPOW sensor value = 3
0x01 = Normal system shutdown with no additional delay
0x02 = Loss of utility power, system is running on UPS/Battery
0x03 = Loss of system critical functions, system should be shutdown
0x04 = Ambient temperature too high
All other values = reserved
We have a user space tool (rtas_errd) on LPAR to monitor for
EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown
after predefined time. It also starts monitoring for any new EPOW
events. If it receives "Power restored" event before predefined time
it will cancel the shutdown. Otherwise after predefined time it will
shutdown the system.
Commit 79872e3546 ("powerpc/pseries: All events of
EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of
the "on UPS/Battery" case, to immediately shutdown the system. This
breaks existing setups that rely on the userspace tool to delay
shutdown and let the system run on the UPS.
Fixes: 79872e3546 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Massage change log and add PAPR references]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 774d977abf ]
clang static analysis reports this problem
b53_common.c:1583:13: warning: The left expression of the compound
assignment is an uninitialized value. The computed value will
also be garbage
ent.port &= ~BIT(port);
~~~~~~~~ ^
ent is set by a successful call to b53_arl_read(). Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.
So add -ETIMEDOUT to the switch statement. Because
b53_arl_op_wait() already prints out a message, do not add another
one.
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3d897e01a ]
netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue
or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the
queue number, so the “skb->queue_mapping - 1” will be used. This may
cause the last queue of VF not been used.
Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called
later will get the correct queue number, and VF will be able to use
all queues.
Fixes: b3bf5666a5 ("hv_netvsc: defer queue selection to VF")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf96d97738 ]
Replace alloc_etherdev_mq with devm_alloc_etherdev_mqs. In this way,
when probe fails, netdev can be freed automatically.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63d4a4c145 ]
The reset work is scheduled by the timer routine whenever it
detects that a device reset is required (e.g. when a keep_alive signal
is missing).
When releasing device resources in ena_destroy_device() the driver
cancels the scheduling of the timer routine without destroying the reset
work explicitly.
This creates the following bug:
The driver is suspended and the ena_suspend() function is called
-> This function calls ena_destroy_device() to free the net device
resources
-> The driver waits for the timer routine to finish
its execution and then cancels it, thus preventing from it
to be called again.
If, in its final execution, the timer routine schedules a reset,
the reset routine might be called afterwards,and a redundant call to
ena_restore_device() would be made.
By changing the reset routine we allow it to read the device's state
accurately.
This is achieved by checking whether ENA_FLAG_TRIGGER_RESET flag is set
before resetting the device and making both the destruction function and
the flag check are under rtnl lock.
The ENA_FLAG_TRIGGER_RESET is cleared at the end of the destruction
routine. Also surround the flag check with 'likely' because
we expect that the reset routine would be called only when
ENA_FLAG_TRIGGER_RESET flag is set.
The destruction of the timer and reset services in __ena_shutoff() have to
stay, even though the timer routine is destroyed in ena_destroy_device().
This is to avoid a case in which the reset routine is scheduled after
free_netdev() in __ena_shutoff(), which would create an access to freed
memory in adapter->flags.
Fixes: 8c5c7abdeb ("net: ena: add power management ops to the ENA driver")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0410d07190 ]
When the ARP monitor is used for link detection, ARP replies are
validated for all slaves (arp_validate=3) and fail_over_mac is set to
active, two slaves of an active-backup bond may get stuck in a state
where both of them are active and pass packets that they receive to
the bond. This state makes IPv6 duplicate address detection fail. The
state is reached thus:
1. The current active slave goes down because the ARP target
is not reachable.
2. The current ARP slave is chosen and made active.
3. A new slave is enslaved. This new slave becomes the current active
slave and can reach the ARP target.
As a result, the current ARP slave stays active after the enslave
action has finished and the log is littered with "PROBE BAD" messages:
> bond0: PROBE: c_arp ens10 && cas ens11 BAD
The workaround is to remove the slave with "going back" status from
the bond and re-enslave it. This issue was encountered when DPDK PMD
interfaces were being enslaved to an active-backup bond.
I would be possible to fix the issue in bond_enslave() or
bond_change_active_slave() but the ARP monitor was fixed instead to
keep most of the actions changing the current ARP slave in the ARP
monitor code. The current ARP slave is set as inactive and backup
during the commit phase. A new state, BOND_LINK_FAIL, has been
introduced for slaves in the context of the ARP monitor. This allows
administrators to see how slaves are rotated for sending ARP requests
and attempts are made to find a new active slave.
Fixes: b2220cad58 ("bonding: refactor ARP active-backup monitor")
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e0b17b026 ]
If an error occurs during the construction of an afs superblock, it's
possible that an error occurs after a superblock is created, but before
we've created the root dentry. If the superblock has a dynamic root
(ie. what's normally mounted on /afs), the afs_kill_super() will call
afs_dynroot_depopulate() to unpin any created dentries - but this will
oops if the root hasn't been created yet.
Fix this by skipping that bit of code if there is no root dentry.
This leads to an oops looking like:
general protection fault, ...
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
...
RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385
...
Call Trace:
afs_kill_super+0x13b/0x180 fs/afs/super.c:535
deactivate_locked_super+0x94/0x160 fs/super.c:335
afs_get_tree+0x1124/0x1460 fs/afs/super.c:598
vfs_get_tree+0x89/0x2f0 fs/super.c:1547
do_new_mount fs/namespace.c:2875 [inline]
path_mount+0x1387/0x2070 fs/namespace.c:3192
do_mount fs/namespace.c:3205 [inline]
__do_sys_mount fs/namespace.c:3413 [inline]
__se_sys_mount fs/namespace.c:3390 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
which is oopsing on this line:
inode_lock(root->d_inode);
presumably because sb->s_root was NULL.
Fixes: 0da0b7fd73 ("afs: Display manually added cells in dynamic root mount")
Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6163a985e5 ]
efifb_probe() will issue an error message in case the kernel is booted
as Xen dom0 from UEFI as EFI_MEMMAP won't be set in this case. Avoid
that message by calling efi_mem_desc_lookup() only if EFI_MEMMAP is set.
Fixes: 38ac0287b7 ("fbdev/efifb: Honour UEFI memory map attributes when mapping the FB")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d85de3399f ]
If you right-click in the ConfigList window, you will see the following
messages in the console:
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897
QObject::connect: (sender name: 'config')
QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906
QObject::connect: (sender name: 'config')
Right, there is no such slot in QAction. I think this is a typo of
setChecked.
Due to this bug, when you toggled the menu "Option->Show Name/Range/Data"
the state of the context menu was not previously updated. Fix this.
Fixes: d5d973c3f8 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa8de0a3bf ]
If you right-click the first row in the option tree, the pop-up menu
shows up, but if you right-click the second row or below, the event
is ignored due to the following check:
if (e->y() <= header()->geometry().bottom()) {
Perhaps, the intention was to show the pop-menu only when the tree
header was right-clicked, but this handler is not called in that case.
Since the origin of e->y() starts from the bottom of the header,
this check is odd.
Going forward, you can right-click anywhere in the tree to get the
pop-up menu.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb957adb4e ]
See the SDM, volume 3, section 4.4.1:
If PAE paging would be in use following an execution of MOV to CR0 or
MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of
CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then
the PDPTEs are loaded from the address in CR3.
Fixes: b9baba8614 ("KVM, pkeys: expose CPUID/CR4 to guest")
Cc: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20200817181655.3716509-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aae7a75a82 ]
The vfio_iommu_replay() function does not currently unwind on error,
yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma
structure to indicate IOMMU mapping. The IOMMU mappings are torn down
when the domain is destroyed, but the other actions go on to cause
trouble later. For example, the iommu->domain_list can be empty if we
only have a non-IOMMU backed mdev attached. We don't currently check
if the list is empty before getting the first entry in the list, which
leads to a bogus domain pointer. If a vfio_dma entry is erroneously
marked as iommu_mapped, we'll attempt to use that bogus pointer to
retrieve the existing physical page addresses.
This is the scenario that uncovered this issue, attempting to hot-add
a vfio-pci device to a container with an existing mdev device and DMA
mappings, one of which could not be pinned, causing a failure adding
the new group to the existing container and setting the conditions
for a subsequent attempt to explode.
To resolve this, we can first check if the domain_list is empty so
that we can reject replay of a bogus domain, should we ever encounter
this inconsistent state again in the future. The real fix though is
to add the necessary unwind support, which means cleaning up the
current pinning if an IOMMU mapping fails, then walking back through
the r-b tree of DMA entries, reading from the IOMMU which ranges are
mapped, and unmapping and unpinning those ranges. To be able to do
this, we also defer marking the DMA entry as IOMMU mapped until all
entries are processed, in order to allow the unwind to know the
disposition of each entry.
Fixes: a54eb55045 ("vfio iommu type1: Add support for mediated devices")
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd78c59446 ]
The key member of the runtime instrumentation control block contains
only the access key, not the complete storage key. Therefore the value
must be shifted by four bits. Since existing user space does not
necessarily query and set the access key correctly, just ignore the
user space provided key and use the correct one.
Note: this is only relevant for debugging purposes in case somebody
compiles a kernel with a default storage access key set to a value not
equal to zero.
Fixes: 262832bc5a ("s390/ptrace: add runtime instrumention register get/set")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9eaba29c79 ]
The key member of the runtime instrumentation control block contains
only the access key, not the complete storage key. Therefore the value
must be shifted by four bits.
Note: this is only relevant for debugging purposes in case somebody
compiles a kernel with a default storage access key set to a value not
equal to zero.
Fixes: e4b8b3f33f ("s390: add support for runtime instrumentation")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8327070216 ]
When we tear down a network namespace, we unregister all
the netdevices within it. So we may queue a slave device
and a bonding device together in the same unregister queue.
If the only slave device is non-ethernet, it would
automatically unregister the bonding device as well. Thus,
we may end up unregistering the bonding device twice.
Workaround this special case by checking reg_state.
Fixes: 9b5e383c11 ("net: Introduce unregister_netdevice_many()")
Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ca0d9ac3f ]
Broadcast mode bonds transmit a copy of all traffic simultaneously out of
all interfaces, so the "speed" of the bond isn't really the aggregate of
all interfaces, but rather, the speed of the slowest active interface.
Also, the type of the speed field is u32, not unsigned long, so adjust
that accordingly, as required to make min() function here without
complaining about mismatching types.
Fixes: bb5b052f75 ("bond: add support to read speed and duplex via ethtool")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bd5e02a2e ]
Trusted VF with unicast promiscuous mode set, could listen to TX
traffic of other VFs.
Set unicast promiscuous mode to RX traffic, if VSI has port VLAN
configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to
I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with
VLAN to the one without VLAN.
Fixes: 6c41a76069 ("i40e: Add promiscuous on VLAN support")
Fixes: 3b1200891b ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 796a58fe2b ]
Most of the DAPM widgets for DSP ASoC components reuse reg field
of the widgets for its internal calculations, however these are not
real registers. So read/writes to these numbers are not really
valid. However ASoC core will read these registers to get default
state during startup.
With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.
To fix this add dummy read/write function to return default value.
Fixes: e3a33673e8 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200811120205.21805-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf9a379d09 ]
Currently, add_system_zone() just silently merges two added system zones
that overlap. However the overlap should not happen and it generally
suggests that some unrelated metadata overlap which indicates the fs is
corrupted. We should have caught such problems earlier (e.g. in
ext4_check_descriptors()) but add this check as another line of defense.
In later patch we also use this for stricter checking of journal inode
extent tree.
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200728130437.7804-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5872331b3d ]
If for any reason a directory passed to do_split() does not have enough
active entries to exceed half the size of the block, we can end up
iterating over all "count" entries without finding a split point.
In this case, count == move, and split will be zero, and we will
attempt a negative index into map[].
Guard against this by detecting this case, and falling back to
split-to-half-of-count instead; in this case we will still have
plenty of space (> half blocksize) in each split block.
Fixes: ef2b02d3e6 ("ext34: ensure do_split leaves enough free space in both blocks")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/f53e246b-647c-64bb-16ec-135383c70ad7@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
