When I test the uvc gadget function, I find that the uvc
gadget can only transfer the first frame image and then
stop unexpectedly.
Without this patch, the isochronous endpoints doesn't wait
for a XferNotReady event to start the next frame image, and
fail to transfer data. In this case, we will get an endpoint
event DWC3_DEPEVT_XFERINPROGRESS and the event status is
DEPEVT_STATUS_MISSED_ISOC, and the original code try to
issue an EndTransfer command if the started_list is empty.
However, the started_list is never empty, so it doesn't issue
an EndTransfer command and not XferNotReady event happens.
To fix this problem, this patch firstly checks if the event
status is DEPEVT_STATUS_MISSED_ISOC and then unmap the isoc
request and move the request to the pending list. Then it
issue an EndTransfer command if the started_list is empty.
After the EndTransfer is completed, we will get a XferNotReady
event and it can start the isoc requests again.
Change-Id: Ieac3ca9a177bc7599b29ae30bee243e47b3ba7c9
Signed-off-by: William Wu <william.wu@rock-chips.com>
use fast standby mode && mipi clk non-continue mode
to fix take photo stresstest issue
Signed-off-by: Wang Panzhenzhuan <randy.wang@rock-chips.com>
Change-Id: Idf9ff7e509d77cb78764ba5f97f14ff402172363
We had a 100us delay to synchronize the END_TRANSFER command completion
before giving back requests to the function drivers. Now, the controller
driver can handle cancelled TRBs with the requests' cancelled_list and
it can also wait until the END_TRANSFER completion before starting new
transfers. Synchronization can simply base on the controller's command
completion interrupt. The 100us delay is no longer needed. Remove this
arbitrary delay.
Change-Id: Ie6d1a46e8975b7d8b80c4523d71c58a5bffd9413
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit cf2f8b63f7)
If the END_TRANSFER command hasn't completed yet, then don't send the
START_TRANSFER command. The controller may not be able to start if
that's the case. Some controller revisions depend on this. See
commit 76a638f8ac ("usb: dwc3: gadget: wait for End Transfer to
complete"). Let's only send START_TRANSFER command after the
END_TRANSFER command had completed.
Change-Id: Id6d0be76c48ab556bc3e5a9a75014de0ae671ed4
Fixes: 3aec99154d ("usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit da10bcdd6f)
While the END_TRANSFER command is sent but not completed, any request
dequeue during this time will cause the driver to issue the END_TRANSFER
command. The driver needs to submit the command only once to stop the
controller from processing further. The controller may take more time to
process the same command multiple times unnecessarily. Let's add a flag
DWC3_EP_END_TRANSFER_PENDING to check for this condition.
Change-Id: Ibd378cfb4320dfa962b76fa50b5f002d7eac1d8b
Fixes: 3aec99154d ("usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit c58d8bfc77)
Normally the END_TRANSFER command completion handler will clear the
DWC3_EP_TRANSFER_STARTED flag. However, if the command was sent without
interrupt on completion, then the flag will not be cleared. Make sure to
clear the flag in this case.
Change-Id: I34ece5ee5e01f0cf9b1061e99f902cfc19a5dfed
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: William Wu <william.wu@rock-chips.com>
(cherry picked from commit d3abda5a98)
Only support panels which all parameters from device tree.
Save boot time about 2ms on rk3126-bnd-d708 board.
Change-Id: Ie075ff5c84c1807029873555f58bd13d41350abf
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
When CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y, it is no need to create
kthread cryptomgr_test, which almost do nothing but crypto_alg_tested().
Just call crypto_alg_tested() in cryptomgr_schedule_test() directly.
Save boot time about 7ms on rk3126-bnd-d708 board.
Change-Id: If465f8419dba4ea955df157b3405f3267a96c7d6
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
This is extremely useful in diagnosing remote crashes, and is based heavily
on original work by <md@google.com>.
Signed-off-by: San Mehat <san@google.com>
Cc: Michael Davidson <md@google.com>
[ARM] process: Use uber-safe probe_kernel_address() to read mem when dumping.
This prevents the dump from taking pagefaults / external aborts.
Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Change-Id: I7586677c4ea0e064b5a38c7972102db3b5771500
Probe devices asynchronously instead of the driver. This results in us
seeing the same behavior if the device is registered before the driver or
after. This way we can avoid serializing the initialization should the
driver not be loaded until after the devices have already been added.
The motivation behind this is that if we have a set of devices that
take a significant amount of time to load we can greatly reduce the time to
load by processing them in parallel instead of one at a time. In addition,
each device can exist on a different node so placing a single thread on one
CPU to initialize all of the devices for a given driver can result in poor
performance on a system with multiple nodes.
This approach can reduce the time needed to scan SCSI LUNs significantly.
The only way to realize that speedup is by enabling more concurrency which
is what is achieved with this patch.
To achieve this it was necessary to add a new member "async_driver" to the
device_private structure to store the driver pointer while we wait on the
deferred probe call.
Change-Id: I08edadd321d483facd62ed913d17bd79813e66d9
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
(cherry picked from commit ef0ff68351)
Try to consolidate all of the locking and unlocking of both the parent and
device when attaching or removing a driver from a given device.
To do that I first consolidated the lock pattern into two functions
__device_driver_lock and __device_driver_unlock. After doing that I then
created functions specific to attaching and detaching the driver while
acquiring these locks. By doing this I was able to reduce the number of
spots where we touch need_parent_lock from 12 down to 4.
This patch should produce no functional changes, it is meant to be a code
clean-up/consolidation only.
Change-Id: Ifbaf68e43b10a84ba90fce65f6cbe8fb79acbc62
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
(cherry picked from commit ed88747c6c)
Asynchronous driver probing can help much on kernel fastboot, and
this option can provide a flexible way to optimize and quickly verify
async driver probe.
Also it will help in below cases:
* Some driver actually covers several families of HWs, some of which
could use async probing while others don't. So we can't simply
turn on the PROBE_PREFER_ASYNCHRONOUS flag in driver, but use this
cmdline option, like igb driver async patch discussed at
https://www.spinics.net/lists/netdev/msg545986.html
* For SOC (System on Chip) with multiple spi or i2c controllers, most
of the slave spi/i2c devices will be assigned with fixed controller
number, while async probing may make those controllers get different
index for each boot, which prevents those controller drivers to be
async probed. For platforms not using these spi/i2c slave devices,
they can use this cmdline option to benefit from the async probing.
Change-Id: I98d4d57ead7e40b075f1d43ebea559c5497cf341
Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
(cherry picked from commit 1ea61b68d0)
This reverts commit 32948d8b86.
See commit a8b1fa6c47 ("Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"")
Conflicts:
drivers/devfreq/devfreq.c
Change-Id: If4fec73bb1cf38afffd4699dfe25b8c32ea7472f
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
V4L2 is disabled by default, enable common features.
23 Added functions:
void vb2_buffer_done(vb2_buffer*, vb2_buffer_state)
int vb2_dqbuf(vb2_queue*, v4l2_buffer*, bool)
int vb2_fop_mmap(file*, vm_area_struct*)
__poll_t vb2_fop_poll(file*, poll_table*)
ssize_t vb2_fop_read(file*, char*, size_t, loff_t*)
int vb2_fop_release(file*)
int vb2_ioctl_create_bufs(file*, void*, v4l2_create_buffers*)
int vb2_ioctl_dqbuf(file*, void*, v4l2_buffer*)
int vb2_ioctl_expbuf(file*, void*, v4l2_exportbuffer*)
int vb2_ioctl_qbuf(file*, void*, v4l2_buffer*)
int vb2_ioctl_querybuf(file*, void*, v4l2_buffer*)
int vb2_ioctl_reqbufs(file*, void*, v4l2_requestbuffers*)
int vb2_ioctl_streamoff(file*, void*, v4l2_buf_type)
int vb2_ioctl_streamon(file*, void*, v4l2_buf_type)
void vb2_ops_wait_finish(vb2_queue*)
void vb2_ops_wait_prepare(vb2_queue*)
void* vb2_plane_vaddr(vb2_buffer*, unsigned int)
int vb2_qbuf(vb2_queue*, v4l2_buffer*)
int vb2_queue_init(vb2_queue*)
void vb2_queue_release(vb2_queue*)
int vb2_reqbufs(vb2_queue*, v4l2_requestbuffers*)
int vb2_streamoff(vb2_queue*, v4l2_buf_type)
int vb2_streamon(vb2_queue*, v4l2_buf_type)
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
Bug: 151246806
Test: abi check, confirm the various vb2_* functions are now available
Change-Id: I6e20c12c645fd45801b24f922c66508b667ea371
Some special applications of video may require:
rockchip_pmu_pd_on(dev)---> force power on pd
rockchip_pmu_pd_off(dev)---> force power down pd
rockchip_pmu_pd_is_on(dev)---> pd status
Change-Id: I264d76559aef0b0540130bf29a4635a3f5380a7c
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
The initialization frequency of cci was adjusted from 300M to 600M.
Change-Id: I36ea20ec84c97f893894687ce4eb7bd021d372a0
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Provide a securable way to open a file for filling
Test: incfs_test passes
Bug: 138149732
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Change-Id: Ib4b6fd839ad30ce08e31121d19e2c0d7066d302f
Filling blocks is not equivalent to writing a file, since they are
constrained by the root hash. selinux policy may wish to treat them
differently, for instance.
Test: incfs_test passes
Bug: 138149732
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Change-Id: Ic369b84b92547b1cfefe422bd881c4e466090aed
They provide no value and simply duplicate a check in copy_from/to_user
Test: incfs_test passes
Bug: 138149732
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Change-Id: Icc6054a2d6a495c9a03cd1507dda1ab8ca0b0dc4
Innosilicon LVDS/TTL PHY implements LVDS TIA/EIA protocol.
Normally, Innosilicon LVDS/TTL PHY contains four 7-bit
parallel-load serial-out shift registers, a 7X clock PLL,
and five Low-Voltage Differential Signaling (LVDS) line drivers
in a single integrated circuit. These functions allow 28 bits
of single-ended LVTTL data to be synchronously transmitted over
five balanced-pair conductors for receipt by a compatible receiver.
In addition, Innosilicon LVDS/TTL PHY could extend from 4 lanes
to N lanes (N is required by the customer). Therefore, the TTL
lines extend respectively.
Change-Id: Ib48537c49dec919e2ed5bc6347217fe83be07371
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
modify vop-dclk-mode to 1 for rk3368-808-evb to fix
screen display glitter.
Signed-off-by: Zhihuan He <huan.he@rock-chips.com>
Change-Id: Ib13304b5e97626e76dafad91ba296f37b9b3159a
Changes in 4.19.111
phy: Revert toggling reset changes.
net: phy: Avoid multiple suspends
cgroup, netclassid: periodically release file_lock on classid updating
gre: fix uninit-value in __iptunnel_pull_header
inet_diag: return classid for all socket types
ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interface
ipvlan: add cond_resched_rcu() while processing muticast backlog
ipvlan: do not add hardware address of master to its unicast filter list
ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast()
ipvlan: don't deref eth hdr before checking it's set
net/ipv6: use configured metric when add peer route
netlink: Use netlink header as base to calculate bad attribute offset
net: macsec: update SCI upon MAC address change.
net: nfc: fix bounds checking bugs on "pipe"
net/packet: tpacket_rcv: do not increment ring index on drop
net: stmmac: dwmac1000: Disable ACS if enhanced descs are not used
net: systemport: fix index check to avoid an array out of bounds access
r8152: check disconnect status after long sleep
sfc: detach from cb_page in efx_copy_channel()
bnxt_en: reinitialize IRQs when MTU is modified
cgroup: memcg: net: do not associate sock with unrelated cgroup
net: memcg: late association of sock to memcg
net: memcg: fix lockdep splat in inet_csk_accept()
devlink: validate length of param values
fib: add missing attribute validation for tun_id
nl802154: add missing attribute validation
nl802154: add missing attribute validation for dev_type
can: add missing attribute validation for termination
macsec: add missing attribute validation for port
net: fq: add missing attribute validation for orphan mask
team: add missing attribute validation for port ifindex
team: add missing attribute validation for array index
nfc: add missing attribute validation for SE API
nfc: add missing attribute validation for deactivate target
nfc: add missing attribute validation for vendor subcommand
net: phy: fix MDIO bus PM PHY resuming
selftests/net/fib_tests: update addr_metric_test for peer route testing
net/ipv6: need update peer route when modify metric
net/ipv6: remove the old peer route if change it to a new one
tipc: add missing attribute validation for MTU property
devlink: validate length of region addr/len
bonding/alb: make sure arp header is pulled before accessing it
slip: make slhc_compress() more robust against malicious packets
net: fec: validate the new settings in fec_enet_set_coalesce()
macvlan: add cond_resched() during multicast processing
cgroup: cgroup_procs_next should increase position index
cgroup: Iterate tasks that did not finish do_exit()
iwlwifi: mvm: Do not require PHY_SKU NVM section for 3168 devices
virtio-blk: fix hw_queue stopped on arbitrary error
iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint
netfilter: nf_conntrack: ct_cpu_seq_next should increase position index
netfilter: synproxy: synproxy_cpu_seq_next should increase position index
netfilter: xt_recent: recent_seq_next should increase position index
netfilter: x_tables: xt_mttg_seq_next should increase position index
workqueue: don't use wq_select_unbound_cpu() for bound works
drm/amd/display: remove duplicated assignment to grph_obj_type
ktest: Add timeout for ssh sync testing
cifs_atomic_open(): fix double-put on late allocation failure
gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache
KVM: x86: clear stale x86_emulate_ctxt->intercept value
ARC: define __ALIGN_STR and __ALIGN symbols for ARC
macintosh: windfarm: fix MODINFO regression
efi: Fix a race and a buffer overflow while reading efivars via sysfs
efi: Make efi_rts_work accessible to efi page fault handler
mt76: fix array overflow on receiving too many fragments for a packet
x86/mce: Fix logic and comments around MSR_PPIN_CTL
iommu/dma: Fix MSI reservation allocation
iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint
iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page
batman-adv: Don't schedule OGM for disabled interface
pinctrl: meson-gxl: fix GPIOX sdio pins
pinctrl: core: Remove extra kref_get which blocks hogs being freed
drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exits
i2c: gpio: suppress error on probe defer
nl80211: add missing attribute validation for critical protocol indication
nl80211: add missing attribute validation for beacon report scanning
nl80211: add missing attribute validation for channel switch
perf bench futex-wake: Restore thread count default to online CPU count
netfilter: cthelper: add missing attribute validation for cthelper
netfilter: nft_payload: add missing attribute validation for payload csum flags
netfilter: nft_tunnel: add missing attribute validation for tunnels
iommu/vt-d: Fix the wrong printing in RHSA parsing
iommu/vt-d: Ignore devices with out-of-spec domain number
i2c: acpi: put device when verifying client fails
ipv6: restrict IPV6_ADDRFORM operation
net/smc: check for valid ib_client_data
net/smc: cancel event worker during device removal
efi: Add a sanity check to efivar_store_raw()
batman-adv: Avoid free/alloc race when handling OGM2 buffer
Linux 4.19.111
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ide220f0b6a12d291bda4a83f17cde25bbe64e2ff
debug_port_init() may called when earlycon is used, which may block
kernel init. Use console_lock()/console_unlock() to avoid the race.
Change-Id: I711c038f31141cb5225624e2a9d746bd4de232e4
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
commit a8d23cbbf6 upstream.
A B.A.T.M.A.N. V virtual interface has an OGM2 packet buffer which is
initialized using data from the netdevice notifier and other rtnetlink
related hooks. It is sent regularly via various slave interfaces of the
batadv virtual interface and in this process also modified (realloced) to
integrate additional state information via TVLV containers.
It must be avoided that the worker item is executed without a common lock
with the netdevice notifier/rtnetlink helpers. Otherwise it can either
happen that half modified data is sent out or the functions modifying the
OGM2 buffer try to access already freed memory regions.
Fixes: 0da0035942 ("batman-adv: OGMv2 - add basic infrastructure")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da72a379b2 upstream.
VMD subdevices are created with a PCI domain ID of 0x10000 or
higher.
These subdevices are also handled like all other PCI devices by
dmar_pci_bus_notifier().
However, when dmar_alloc_pci_notify_info() take records of such devices,
it will truncate the domain ID to a u16 value (in info->seg).
The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if
it is 0000:00:02.0.
In the unlucky event that a real device also exists at 0000:00:02.0 and
also has a device-specific entry in the DMAR table,
dmar_insert_dev_scope() will crash on:
BUG_ON(i >= devices_cnt);
That's basically a sanity check that only one PCI device matches a
single DMAR entry; in this case we seem to have two matching devices.
Fix this by ignoring devices that have a domain number higher than
what can be looked up in the DMAR table.
This problem was carefully diagnosed by Jian-Hong Pan.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Fixes: 59ce0515cd ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0bb0c22c4 upstream.
When base address in RHSA structure doesn't match base address in
each DRHD structure, the base address in last DRHD is printed out.
This doesn't make sense when there are multiple DRHD units, fix it
by printing the buggy RHSA's base address.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Fixes: fd0c889489 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f649bd9dd5 upstream.
Since commit 3b2323c2c1 ("perf bench futex: Use cpumaps") the default
number of threads the benchmark uses got changed from number of online
CPUs to zero:
$ perf bench futex wake
# Running 'futex/wake' benchmark:
Run summary [PID 15930]: blocking on 0 threads (at [private] futex 0x558b8ee4bfac), waking up 1 at a time.
[Run 1]: Wokeup 0 of 0 threads in 0.0000 ms
[...]
[Run 10]: Wokeup 0 of 0 threads in 0.0000 ms
Wokeup 0 of 0 threads in 0.0004 ms (+-40.82%)
Restore the old behavior by grabbing the number of online CPUs via
cpu->nr:
$ perf bench futex wake
# Running 'futex/wake' benchmark:
Run summary [PID 18356]: blocking on 8 threads (at [private] futex 0xb3e62c), waking up 1 at a time.
[Run 1]: Wokeup 8 of 8 threads in 0.0260 ms
[...]
[Run 10]: Wokeup 8 of 8 threads in 0.0270 ms
Wokeup 8 of 8 threads in 0.0419 ms (+-24.35%)
Fixes: 3b2323c2c1 ("perf bench futex: Use cpumaps")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200305083714.9381-3-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3747cd2efe upstream.
If a GPIO we are trying to use is not available and we are deferring
the probe, don't output an error message.
This seems to have been the intent of commit 05c7477885
("i2c: gpio: Add support for named gpios in DT") but the error was
still output due to not checking the updated 'retdesc'.
Fixes: 05c7477885 ("i2c: gpio: Add support for named gpios in DT")
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
