[ Upstream commit 076b6289b2 ]
The last buffer from before the change must be marked
with the V4L2_BUF_FLAG_LAST flag,
similarly to the Drain sequence above.
initiate a drain of the capture queue in dynamic resolution change
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1d2ccc2cd ]
For format V4L2_PIX_FMT_VC1_ANNEX_G,
the separate codec data is required only once.
The repeated codec data may introduce some decoding error.
so drop the repeated codec data.
It's amphion vpu's limitation
Fixes: e670f5d672 ("media: amphion: only insert the first sequence startcode for vc1l format")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: xiahong.bao <xiahong.bao@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 668ee1a3a1 ]
For format V4L2_PIX_FMT_VC1_ANNEX_L,
the codec data is replaced with startcode,
and then driver drop it, otherwise it may led to decoding error.
It's amphion vpu's limitation
Driver has dropped the first codec data,
but need to drop the repeated codec data too.
Fixes: e670f5d672 ("media: amphion: only insert the first sequence startcode for vc1l format")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: xiahong.bao <xiahong.bao@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdaca63186 ]
If az6007_read() returns error, there is no sence to continue.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 3af2f4f15a ("[media] az6007: Change the az6007 read/write routine parameter")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55f223b8b4 ]
Returning an error value in a platform driver's remove callback results in
a generic error message being emitted by the driver core, but otherwise it
doesn't make a difference. The device goes away anyhow.
For each case where ret is non-zero the driver already emits an error
message, so suppress the generic error message by returning zero
unconditionally. (Side note: The return value handling was unreliable
anyhow as the value returned by dwc2_exit_hibernation() was overwritten
anyhow if hsotg->in_ppd was non-zero.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/20221017195914.1426297-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: ada050c691 ("usb: dwc2: Fix some error handling paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cd2e5f75b ]
If a file has FI_COMPRESS_RELEASED, all writes for it should not be
allowed.
Fixes: 5fdb322ff2 ("f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE")
Signed-off-by: Qi Han <hanqi@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83f3fcf96f ]
The __w1_remove_master_device() function calls:
list_del(&dev->w1_master_entry);
So presumably this can cause an endless loop.
Fixes: 7785925dd8 ("[PATCH] w1: cleanups.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dca5480ab7 ]
The commit 67b392f7b8 ("w1_therm: optimizing temperature read timings")
accidentially inverted the logic for lock handling of the bus mutex.
Before:
pullup -> release lock before sleep
no pullup -> release lock after sleep
After:
pullup -> release lock after sleep
no pullup -> release lock before sleep
This cause spurious measurements of 85 degree (powerup value) on the
Tarragon board with connected 1-w temperature sensor
(w1_therm.w1_strong_pull=0).
In the meantime a new feature for polling the conversion
completion has been integrated in these branches with
commit 021da53e65 ("w1: w1_therm: Add sysfs entries to control
conversion time and driver features"). But this feature isn't
available for parasite power mode, so handle this separately.
Link: https://lore.kernel.org/regressions/2023042645-attentive-amends-7b0b@gregkh/T/
Fixes: 67b392f7b8 ("w1_therm: optimizing temperature read timings")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230427112152.12313-1-stefan.wahren@i2se.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fc80fc2d4e upstream.
After the listener svc_sock is freed, and before invoking svc_tcp_accept()
for the established child sock, there is a window that the newsock
retaining a freed listener svc_sock in sk_user_data which cloning from
parent. In the race window, if data is received on the newsock, we will
observe use-after-free report in svc_tcp_listen_data_ready().
Reproduce by two tasks:
1. while :; do rpc.nfsd 0 ; rpc.nfsd; done
2. while :; do echo "" | ncat -4 127.0.0.1 2049 ; done
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
Read of size 8 at addr ffff888139d96228 by task nc/102553
CPU: 7 PID: 102553 Comm: nc Not tainted 6.3.0+ #18
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<IRQ>
dump_stack_lvl+0x33/0x50
print_address_description.constprop.0+0x27/0x310
print_report+0x3e/0x70
kasan_report+0xae/0xe0
svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
tcp_data_queue+0x9f4/0x20e0
tcp_rcv_established+0x666/0x1f60
tcp_v4_do_rcv+0x51c/0x850
tcp_v4_rcv+0x23fc/0x2e80
ip_protocol_deliver_rcu+0x62/0x300
ip_local_deliver_finish+0x267/0x350
ip_local_deliver+0x18b/0x2d0
ip_rcv+0x2fb/0x370
__netif_receive_skb_one_core+0x166/0x1b0
process_backlog+0x24c/0x5e0
__napi_poll+0xa2/0x500
net_rx_action+0x854/0xc90
__do_softirq+0x1bb/0x5de
do_softirq+0xcb/0x100
</IRQ>
<TASK>
...
</TASK>
Allocated by task 102371:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7b/0x90
svc_setup_socket+0x52/0x4f0 [sunrpc]
svc_addsock+0x20d/0x400 [sunrpc]
__write_ports_addfd+0x209/0x390 [nfsd]
write_ports+0x239/0x2c0 [nfsd]
nfsctl_transaction_write+0xac/0x110 [nfsd]
vfs_write+0x1c3/0xae0
ksys_write+0xed/0x1c0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 102551:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x106/0x190
__kmem_cache_free+0x133/0x270
svc_xprt_free+0x1e2/0x350 [sunrpc]
svc_xprt_destroy_all+0x25a/0x440 [sunrpc]
nfsd_put+0x125/0x240 [nfsd]
nfsd_svc+0x2cb/0x3c0 [nfsd]
write_threads+0x1ac/0x2a0 [nfsd]
nfsctl_transaction_write+0xac/0x110 [nfsd]
vfs_write+0x1c3/0xae0
ksys_write+0xed/0x1c0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fix the UAF by simply doing nothing in svc_tcp_listen_data_ready()
if state != TCP_LISTEN, that will avoid dereferencing svsk for all
child socket.
Link: https://lore.kernel.org/lkml/20230507091131.23540-1-dinghui@sangfor.com.cn/
Fixes: fa9251afc3 ("SUNRPC: Call the default socket callbacks instead of open coding")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b90ecc0379 upstream.
Currently, associating a loop device with a different file descriptor
does not increment its diskseq. This allows the following race
condition:
1. Program X opens a loop device
2. Program X gets the diskseq of the loop device.
3. Program X associates a file with the loop device.
4. Program X passes the loop device major, minor, and diskseq to
something.
5. Program X exits.
6. Program Y detaches the file from the loop device.
7. Program Y attaches a different file to the loop device.
8. The opener finally gets around to opening the loop device and checks
that the diskseq is what it expects it to be. Even though the
diskseq is the expected value, the result is that the opener is
accessing the wrong file.
From discussions with Christoph Hellwig, it appears that
disk_force_media_change() was supposed to call inc_diskseq(), but in
fact it does not. Adding a Fixes: tag to indicate this. Christoph's
Reported-by is because he stated that disk_force_media_change()
calls inc_diskseq(), which is what led me to discover that it should but
does not.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Fixes: e6138dc12d ("block: add a helper to raise a media changed event")
Cc: stable@vger.kernel.org # 5.15+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230607170837.1559-1-demi@invisiblethingslab.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95a55437dc upstream.
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 of this series).
Patch 3 (this series) adds additional error checking and warning
messages. One of the error checks now makes use of the previously
unused rdb_CylBlocks field, which causes a 'sparse' warning
(cast to restricted __be32).
Annotate all 32 bit fields in affs_hardblocks.h as __be32, as the
on-disk format of RDB and partition blocks is always big endian.
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230620201725.7020-3-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6f3f28f60 upstream.
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.
Bail out if sector addresses overflow 32 bits on kernels without LBD
support.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 in this series).
This patch adds additional error checking and warning messages.
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/r/20230620201725.7020-4-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd55842ed9 upstream.
The PCM memory allocation helpers have a sanity check against too many
buffer allocations. However, the check is performed without a proper
lock and the allocation isn't serialized; this allows user to allocate
more memories than predefined max size.
Practically seen, this isn't really a big problem, as it's more or
less some "soft limit" as a sanity check, and it's not possible to
allocate unlimitedly. But it's still better to address this for more
consistent behavior.
The patch covers the size check in do_alloc_pages() with the
card->memory_mutex, and increases the allocated size there for
preventing the further overflow. When the actual allocation fails,
the size is decreased accordingly.
Reported-by: BassCheck <bass@buaa.edu.cn>
Reported-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/CADm8Tek6t0WedK+3Y6rbE5YEt19tML8BUL45N2ji4ZAz1KcN_A@mail.gmail.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230703112430.30634-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89dbb335cb upstream.
snd_jack_report() is supposed to be callable from an IRQ context, too,
and it's indeed used in that way from virtsnd driver. The fix for
input_dev race in commit 1b6a6fc528 ("ALSA: jack: Access input_dev
under mutex"), however, introduced a mutex lock in snd_jack_report(),
and this resulted in a potential sleep-in-atomic.
For addressing that problem, this patch changes the relevant code to
use the object get/put and removes the mutex usage. That is,
snd_jack_report(), it takes input_get_device() and leaves with
input_put_device() for assuring the input_dev being assigned.
Although the whole mutex could be reduced, we keep it because it can
be still a protection for potential races between creation and
deletion.
Fixes: 1b6a6fc528 ("ALSA: jack: Access input_dev under mutex")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/cf95f7fe-a748-4990-8378-000491b40329@moroto.mountain
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230706155357.3470-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0aabed9ca upstream.
In scenarios where pullup relies on resume (get sync) to initialize
the controller and set the run stop bit, then core_init is followed by
gadget_resume which will eventually set run stop bit.
But in cases where the core_init fails, the return value is not sent
back to udc appropriately. So according to UDC the controller has
started but in reality we never set the run stop bit.
On systems like Android, there are uevents sent to HAL depending on
whether the configfs_bind / configfs_disconnect were invoked. In the
above mentioned scnenario, if the core init fails, the run stop won't
be set and the cable plug-out won't result in generation of any
disconnect event and userspace would never get any uevent regarding
cable plug out and we never call pullup(0) again. Furthermore none of
the next Plug-In/Plug-Out's would be known to configfs.
Return back the appropriate result to UDC to let the userspace/
configfs know that the pullup failed so they can take appropriate
action.
Fixes: 77adb8bdf4 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded")
Cc: stable <stable@kernel.org>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Message-ID: <20230618120949.14868-1-quic_kriskura@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffa5f7a3bf upstream.
The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 USB configurations (default, RmNet,
CDC-ECM) are the same.
In default mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
In RmNet mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: RMNET interface
In CDC-ECM mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20230622092921.12651-1-davide.tronchin.94@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0303c9729a ]
Niklāvs reported a boot regression on an Alderlake machine and bisected it
to commit 9df9d2f047 ("init: Invoke arch_cpu_finalize_init() earlier").
By moving the invocation of arch_cpu_finalize_init() further down he
identified that efi_enter_virtual_mode() is the function which causes the
boot hang.
The main difference of the earlier invocation is that the boot CPU is
already fully initialized and mitigations and alternatives are applied.
But the only really interesting change turned out to be IBT, which is now
enabled before efi_enter_virtual_mode(). "ibt=off" on the kernel command
line cured the problem.
Inspection of the involved calls in efi_enter_virtual_mode() unearthed that
efi_set_virtual_address_map() is the only place in the kernel which invokes
an EFI call without the IBT safe wrapper. This went obviously unnoticed so
far as IBT was enabled later.
Use arch_efi_call_virt() instead of efi_call() to cure that.
Fixes: fe379fa4d1 ("x86/ibt: Disable IBT around firmware")
Fixes: 9df9d2f047 ("init: Invoke arch_cpu_finalize_init() earlier")
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217602
Link: https://lore.kernel.org/r/87jzvm12q0.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 893b24181b ]
The FFR is a predicate register which can vary between 16 and 256 bits
in size depending upon the configured vector length. When saving the
SVE state in streaming SVE mode, the FFR register is inaccessible and
so commit 9f58486657 ("arm64/sve: Make access to FFR optional") simply
clears the FFR field of the in-memory context structure. Unfortunately,
it achieves this using an unconditional 8-byte store and so if the SME
vector length is anything other than 64 bytes in size we will either
fail to clear the entire field or, worse, we will corrupt memory
immediately following the structure. This has led to intermittent kfence
splats in CI [1] and can trigger kmalloc Redzone corruption messages
when running the 'fp-stress' kselftest:
| =============================================================================
| BUG kmalloc-1k (Not tainted): kmalloc Redzone overwritten
| -----------------------------------------------------------------------------
|
| 0xffff000809bf1e22-0xffff000809bf1e27 @offset=7714. First byte 0x0 instead of 0xcc
| Allocated in do_sme_acc+0x9c/0x220 age=2613 cpu=1 pid=531
| __kmalloc+0x8c/0xcc
| do_sme_acc+0x9c/0x220
| ...
Replace the 8-byte store with a store of a predicate register which has
been zero-initialised with PFALSE, ensuring that the entire field is
cleared in memory.
[1] https://lore.kernel.org/r/CA+G9fYtU7HsV0R0dp4XEH5xXHSJFw8KyDf5VQrLLfMxWfxQkag@mail.gmail.com
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 9f58486657 ("arm64/sve: Make access to FFR optional")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20230628155605.22296-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cedc58bdb ]
clang warns about a possible field overflow in a memcpy:
In file included from fs/smb/server/smb_common.c:7:
include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__write_overflow_field(p_size_field, size);
It appears to interpret the "&out[baselen + 4]" as referring to a single
byte of the character array, while the equivalen "out + baselen + 4" is
seen as an offset into the array.
I don't see that kind of warning elsewhere, so just go with the simple
rework.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 326a8d04f1 ]
All the server credits and in-flight info is protected by req_lock.
Once the req_lock is held, and we've determined that we have enough
credits to continue, this lock cannot be dropped till we've made the
changes to credits and in-flight count.
However, we used to drop the lock in order to avoid deadlock with
the recent srv_lock. This could cause the checks already made to be
invalidated.
Fixed it by moving the server status check to before locking req_lock.
Fixes: d7d7a66aac ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33f736187d ]
In smb2_compound_op we have a possible use-after-free
which can cause hard to debug problems later on.
This was revealed during stress testing with KASAN enabled
kernel. Fixing it by moving the cfile free call to
a few lines below, after the usage.
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e28a798c3 ]
Currently, the EFI stub will disable PCI DMA as the very last thing it
does before calling ExitBootServices(), to avoid interfering with the
firmware's normal operation as much as possible.
However, the stub will invoke DisconnectController() on all endpoints
downstream of the PCI bridges it disables, and this may affect the
layout of the EFI memory map, making it substantially more likely that
ExitBootServices() will fail the first time around, and that the EFI
memory map needs to be reloaded.
This, in turn, increases the likelihood that the slack space we
allocated is insufficient (and we can no longer allocate memory via boot
services after having called ExitBootServices() once), causing the
second call to GetMemoryMap (and therefore the boot) to fail. This makes
the PCI DMA disable feature a bit more fragile than it already is, so
let's make it more robust, by allocating the space for the EFI memory
map after disabling PCI DMA.
Fixes: 4444f8541d ("efi: Allow disabling PCI busmastering on bridges during boot")
Reported-by: Glenn Washburn <development@efficientek.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25a21fbb93 ]
With GCOV_PROFILE_ALL, Clang injects __llvm_gcov_* functions to each
object file, including the *.mod.o. As we filter out CC_FLAGS_CFI
for *.mod.o, the compiler won't generate type hashes for the
injected functions, and therefore indirectly calling them during
module loading trips indirect call checking.
Enabling CFI for *.mod.o isn't sufficient to fix this issue after
commit 0c3e806ec0 ("x86/cfi: Add boot time hash randomization"),
as *.mod.o aren't processed by objtool, which means any hashes
emitted there won't be randomized. Therefore, in addition to
disabling CFI for *.mod.o, also disable GCOV, as the object files
don't otherwise contain any executable code.
Fixes: cf68fffb66 ("add support for Clang CFI")
Reported-by: Joe Fradley <joefradley@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 501e197a02 ]
The st-rng driver uses devres to register itself with the hwrng core,
the driver will be unregistered from hwrng when its device goes out of
scope. This happens after the driver's remove function is called.
However, st-rng's clock is disabled in the remove function. There's a
short timeframe where st-rng is still registered with the hwrng core
although its clock is disabled. I suppose the clock must be active to
access the hardware and serve requests from the hwrng core.
Switch to devm_clk_get_enabled and let devres disable the clock and
unregister the hwrng. This avoids the race condition.
Fixes: 3e75241be8 ("hwrng: drivers - Use device-managed registration API")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46e66dab85 ]
memory_group_register_static takes maximum number of pages as the argument
while dev_dax_kmem_probe passes total_len (in bytes) as the argument.
IIUC, I don't see any crash/panic impact as such. As,
memory_group_register_static just set the max_pages limit which is used in
auto_movable_zone_for_pfn to determine the zone.
which might cause these condition to behave differently,
This will be true always so jump will happen to kernel_zone
...
if (!auto_movable_can_online_movable(NUMA_NO_NODE, group, nr_pages))
goto kernel_zone;
...
kernel_zone:
return default_kernel_zone_for_pfn(nid, pfn, nr_pages);
Here, In below, zone_intersects compare range will be larger as nr_pages
will be higher (derived from total_len passed in dev_dax_kmem_probe).
...
static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn,
unsigned long nr_pages)
{
struct pglist_data *pgdat = NODE_DATA(nid);
int zid;
for (zid = 0; zid < ZONE_NORMAL; zid++) {
struct zone *zone = &pgdat->node_zones[zid];
if (zone_intersects(zone, start_pfn, nr_pages))
return zone;
}
return &pgdat->node_zones[ZONE_NORMAL];
}
Incorrect zone will be returned here, which in later time might cause bigger
problem.
Fixes: eedf634aac ("dax/kmem: use a single static memory group for a single probed unit")
Signed-off-by: Tarun Sahu <tsahu@linux.ibm.com>
Link: https://lore.kernel.org/r/20230621155025.370672-1-tsahu@linux.ibm.com
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d24b170a9 ]
A CONFIG_DEBUG_KOBJECT_RELEASE test of removing a device-dax region
provider (like modprobe -r dax_hmem) yields:
kobject: 'mapping0' (ffff93eb460e8800): kobject_release, parent 0000000000000000 (delayed 2000)
[..]
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 23 PID: 282 at kernel/locking/lockdep.c:232 __lock_acquire+0x9fc/0x2260
[..]
RIP: 0010:__lock_acquire+0x9fc/0x2260
[..]
Call Trace:
<TASK>
[..]
lock_acquire+0xd4/0x2c0
? ida_free+0x62/0x130
_raw_spin_lock_irqsave+0x47/0x70
? ida_free+0x62/0x130
ida_free+0x62/0x130
dax_mapping_release+0x1f/0x30
device_release+0x36/0x90
kobject_delayed_cleanup+0x46/0x150
Due to attempting ida_free() on an ida object that has already been
freed. Devices typically only hold a reference on their parent while
registered. If a child needs a parent object to complete its release it
needs to hold a reference that it drops from its release callback.
Arrange for a dax_mapping to pin its parent dev_dax instance until
dax_mapping_release().
Fixes: 0b07ce872a ("device-dax: introduce 'mapping' devices")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/168577283412.1672036.16111545266174261446.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da787d5b74 ]
In case if all existing file handles are deferred handles and if all of
them gets closed due to handle lease break then we dont need to send
lease break acknowledgment to server, because last handle close will be
considered as lease break ack.
After closing deferred handels, we check for openfile list of inode,
if its empty then we skip sending lease break ack.
Fixes: 59a556aebc ("SMB3: drop reference to cfile before sending oplock break")
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c907e72f58 ]
When the client received NFS4ERR_BADSESSION, it schedules recovery
and start the state manager thread which in turn freezes the
session table and does not allow for any new requests to use the
no-longer valid session. However, it is possible that before
the state manager thread runs, a new operation would use the
released slot that received BADSESSION and was therefore not
updated its sequence number. Such re-use of the slot can lead
the application errors.
Fixes: 5c441544f0 ("NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
