[ Upstream commit 1ff673333d ]
When removing the module we will get the following warning:
[ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered
[ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI
[ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130
[ 31.921825] Call Trace:
[ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw]
[ 31.923139] i2c_device_remove+0x181/0x1f0
The two bridges (stdp2690, stdp4028) do not probe at the same time, so
the driver does not call ge_b850v3_resgiter() when probing, causing the
driver to try to remove the object that has not been initialized.
Fix this by checking whether both the bridges are probed.
Fixes: 11632d4aa2 ("drm/bridge: megachips: Ensure both bridges are probed before registration")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220830073450.1897020-1-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb7de49645 ]
drm_mipi_dbi needs lots of DRM_KMS_HELPER support, so select
that Kconfig symbol like it is done is most other uses, and
the way that it was before MIPS_DBI was moved from tinydrm
to its core location.
Fixes these build errors:
ld: drivers/gpu/drm/drm_mipi_dbi.o: in function `mipi_dbi_buf_copy':
drivers/gpu/drm/drm_mipi_dbi.c:205: undefined reference to `drm_gem_fb_get_obj'
ld: drivers/gpu/drm/drm_mipi_dbi.c:211: undefined reference to `drm_gem_fb_begin_cpu_access'
ld: drivers/gpu/drm/drm_mipi_dbi.c:215: undefined reference to `drm_gem_fb_vmap'
ld: drivers/gpu/drm/drm_mipi_dbi.c:222: undefined reference to `drm_fb_swab'
ld: drivers/gpu/drm/drm_mipi_dbi.c:224: undefined reference to `drm_fb_memcpy'
ld: drivers/gpu/drm/drm_mipi_dbi.c:227: undefined reference to `drm_fb_xrgb8888_to_rgb565'
ld: drivers/gpu/drm/drm_mipi_dbi.c:235: undefined reference to `drm_gem_fb_vunmap'
ld: drivers/gpu/drm/drm_mipi_dbi.c:237: undefined reference to `drm_gem_fb_end_cpu_access'
ld: drivers/gpu/drm/drm_mipi_dbi.o: in function `mipi_dbi_dev_init_with_formats':
ld: drivers/gpu/drm/drm_mipi_dbi.o:/X64/../drivers/gpu/drm/drm_mipi_dbi.c:469: undefined reference to `drm_gem_fb_create_with_dirty'
Fixes: 174102f4de ("drm/tinydrm: Move mipi-dbi")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Dillon Min <dillon.minfei@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823004243.11596-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83ac7a1c2e ]
Commit 2cc6c71779 ("msi-laptop: Port to new backlight interface
selection API") replaced this check:
if (!quirks->old_ec_model || acpi_video_backlight_support())
pr_info("Brightness ignored, ...");
else
do_register();
With:
if (quirks->old_ec_model ||
acpi_video_get_backlight_type() == acpi_backlight_vendor)
do_register();
But since the do_register() part was part of the else branch, the entire
condition should be inverted. So not only the 2 statements on either
side of the || should be inverted, but the || itself should be replaced
with a &&.
In practice this has likely not been an issue because the new-ec models
(old_ec_model==false) likely all support ACPI video backlight control,
making acpi_video_get_backlight_type() return acpi_backlight_video
turning the second part of the || also false when old_ec_model == false.
Fixes: 2cc6c71779 ("msi-laptop: Port to new backlight interface selection API")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5ad67f136 ]
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one permanently mutes an
ongoing stream by toggling the associated speaker pin control.
(This mirrors commit 1e5907bcb3 ("ASoC: tas2770: Fix handling of
mute/unmute") which was a fix to the tas2770 driver.)
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09273f3883 ]
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
(This mirrors commit c8a6ae3fe1c8 ("ASoC: tas2770: Drop conflicting
set_bias_level power setting") which was a fix to the tas2770 driver.)
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220825140241.53963-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ad4194d6a ]
If chromeos_laptop_prepare_i2c_peripherals() fails after allocating memory
for 'cros_laptop->i2c_peripherals', this memory is freed at 'err_out' label
and nonzero value is returned. Then chromeos_laptop_destroy() is called,
resulting in double-free error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 5020cd29d8 ("platform/chrome: chromeos_laptop - supply properties for ACPI devices")
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220813220843.2373004-1-subkhankulov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 668a8f17b5 ]
Whenever the MIPI-DSI host is unregistered, the code of
mipi_dsi_host_unregister() loops over every device currently found on that
bus and will unregister it.
However, it doesn't detach it from the bus first, which leads to all kind
of resource leaks if the host wants to perform some clean up whenever a
device is detached.
Fixes: 068a002339 ("drm: Add MIPI DSI bus support")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220711173939.1132294-2-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0152dfee23 ]
When mvpp2 is unloaded, the driver specific debugfs directory is not
removed, which technically leads to a memory leak. However, this
directory is only created when the first device is probed, so the
hardware is present. Removing the module is only something a developer
would to when e.g. testing out changes, so the module would be
reloaded. So this memory leak is minor.
The original attempt in commit fe2c9c61f6 ("net: mvpp2: debugfs: fix
memory leak when using debugfs_lookup()") that was labelled as a memory
leak fix was not, it fixed a refcount leak, but in doing so created a
problem when the module is reloaded - the directory already exists, but
mvpp2_root is NULL, so we lose all debugfs entries. This fix has been
reverted.
This is the alternative fix, where we remove the offending directory
whenever the driver is unloaded.
Fixes: 21da57a231 ("net: mvpp2: add a debugfs interface for the Header Parser")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Link: https://lore.kernel.org/r/E1ofOAB-00CzkG-UO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62c07983be ]
Christophe Leroy reported a ~80ms latency spike
happening at first TCP connect() time.
This is because __inet_hash_connect() uses get_random_once()
to populate a perturbation table which became quite big
after commit 4c2c8f03a5 ("tcp: increase source port perturb table to 2^16")
get_random_once() uses DO_ONCE(), which block hard irqs for the duration
of the operation.
This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock
for operations where we prefer to stay in process context.
Then __inet_hash_connect() can use get_random_slow_once()
to populate its perturbation table.
Fixes: 4c2c8f03a5 ("tcp: increase source port perturb table to 2^16")
Fixes: 190cc82489 ("tcp: change source port randomizarion at connect() time")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/netdev/CANn89iLAEYBaoYajy0Y9UmGFff5GPxDUoG-ErVB2jDdRNQ5Tug@mail.gmail.com/T/#t
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b43f9acbb8 ]
bnx2x_tpa_stop() allocates a memory chunk from new_data with
bnx2x_frag_alloc(). The new_data should be freed when gets some error.
But when "pad + len > fp->rx_buf_size" is true, bnx2x_tpa_stop() returns
without releasing the new_data, which will lead to a memory leak.
We should free the new_data with bnx2x_frag_free() when "pad + len >
fp->rx_buf_size" is true.
Fixes: 07b0f00964 ("bnx2x: fix possible panic under memory stress")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a91b750fd6 ]
syzbot is reporting lockdep warning at rds_tcp_reset_callbacks() [1], for
commit ac3615e7f3 ("RDS: TCP: Reduce code duplication in
rds_tcp_reset_callbacks()") added cancel_delayed_work_sync() into a section
protected by lock_sock() without realizing that rds_send_xmit() might call
lock_sock().
We don't need to protect cancel_delayed_work_sync() using lock_sock(), for
even if rds_{send,recv}_worker() re-queued this work while __flush_work()
from cancel_delayed_work_sync() was waiting for this work to complete,
retried rds_{send,recv}_worker() is no-op due to the absence of RDS_CONN_UP
bit.
Link: https://syzkaller.appspot.com/bug?extid=78c55c7bc6f66e53dce2 [1]
Reported-by: syzbot <syzbot+78c55c7bc6f66e53dce2@syzkaller.appspotmail.com>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+78c55c7bc6f66e53dce2@syzkaller.appspotmail.com>
Fixes: ac3615e7f3 ("RDS: TCP: Reduce code duplication in rds_tcp_reset_callbacks()")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4ce91ce12 ]
This commit fixes a bug in the tracking of max_packets_out and
is_cwnd_limited. This bug can cause the connection to fail to remember
that is_cwnd_limited is true, causing the connection to fail to grow
cwnd when it should, causing throughput to be lower than it should be.
The following event sequence is an example that triggers the bug:
(a) The connection is cwnd_limited, but packets_out is not at its
peak due to TSO deferral deciding not to send another skb yet.
In such cases the connection can advance max_packets_seq and set
tp->is_cwnd_limited to true and max_packets_out to a small
number.
(b) Then later in the round trip the connection is pacing-limited (not
cwnd-limited), and packets_out is larger. In such cases the
connection would raise max_packets_out to a bigger number but
(unexpectedly) flip tp->is_cwnd_limited from true to false.
This commit fixes that bug.
One straightforward fix would be to separately track (a) the next
window after max_packets_out reaches a maximum, and (b) the next
window after tp->is_cwnd_limited is set to true. But this would
require consuming an extra u32 sequence number.
Instead, to save space we track only the most important
information. Specifically, we track the strongest available signal of
the degree to which the cwnd is fully utilized:
(1) If the connection is cwnd-limited then we remember that fact for
the current window.
(2) If the connection not cwnd-limited then we track the maximum
number of outstanding packets in the current window.
In particular, note that the new logic cannot trigger the buggy
(a)/(b) sequence above because with the new logic a condition where
tp->packets_out > tp->max_packets_out can only trigger an update of
tp->is_cwnd_limited if tp->is_cwnd_limited is false.
This first showed up in a testing of a BBRv2 dev branch, but this
buggy behavior highlighted a general issue with the
tcp_cwnd_validate() logic that can cause cwnd to fail to increase at
the proper rate for any TCP congestion control, including Reno or
CUBIC.
Fixes: ca8a226343 ("tcp: make cwnd-limited checks measurement-based, and gentler")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 022152aaeb ]
When it returns an error from sctp_auth_asoc_init_active_key(), the
active_key is actually not updated. The old sh_key will be freeed
while it's still used as active key in asoc. Then an use-after-free
will be triggered when sending patckets, as found by syzbot:
sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
sctp_set_owner_w net/sctp/socket.c:132 [inline]
sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863
sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025
inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
This patch is to fix it by not replacing the sh_key when it returns
errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key().
For sctp_auth_set_active_key(), old active_key_id will be set back
to asoc->active_key_id when the same thing happens.
Fixes: 58acd10092 ("sctp: update active_key for asoc when old key is being replaced")
Reported-by: syzbot+a236dd8e9622ed8954a3@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2568a7e083 ]
The l1oip_cleanup() traverses the l1oip_ilist and calls
release_card() to cleanup module and stack. However,
release_card() calls del_timer() to delete the timers
such as keep_tl and timeout_tl. If the timer handler is
running, the del_timer() will not stop it and result in
UAF bugs. One of the processes is shown below:
(cleanup routine) | (timer handler)
release_card() | l1oip_timeout()
... |
del_timer() | ...
... |
kfree(hc) //FREE |
| hc->timeout_on = 0 //USE
Fix by calling del_timer_sync() in release_card(), which
makes sure the timer handlers have finished before the
resources, such as l1oip and so on, have been deallocated.
What's more, the hc->workq and hc->socket_thread can kick
those timers right back in. We add a bool flag to show
if card is released. Then, check this flag in hc->workq
and hc->socket_thread.
Fixes: 3712b42d4b ("Add layer1 over IP support")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5574d32904 ]
ieee80211_tx_queue_params.aifs is not supposed to be written directly
to the REG_EDCA_*_PARAM registers. Instead process it like the vendor
drivers do. It's kinda hacky but it works.
This change boosts the download speed and makes it more stable.
Tested with RTL8188FU but all the other supported chips should also
benefit.
Fixes: 26f1fad29a ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/038cc03f-3567-77ba-a7bd-c4930e3b2fad@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 116523c8fa ]
Change that introduced the use of __check_timeout did not account for
link types properly, it always assumes ACL_LINK is used thus causing
hdev->acl_last_tx to be used even in case of LE_LINK and then again
uses ACL_LINK with hci_link_tx_to.
To fix this __check_timeout now takes the link type as parameter and
then procedure to use the right last_tx based on the link type and pass
it to hci_link_tx_to.
Fixes: 1b1d29e514 ("Bluetooth: Make use of __check_timeout on hci_sched_le")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: David Beinder <david@beinder.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86067ccfa1 ]
Linux is not the only entity using the BlueField I2C busses so
support a lock mechanism provided by hardware to avoid issues
when multiple entities are trying to access the same bus.
The lock is acquired whenever written explicitely or the lock
register is read. So make sure it is always released at the end
of a successful or failed transaction.
Fixes: b5b5b32081 (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30ea703a38 ]
Include the header containing the prototype of init_ia32_feat_ctl(),
solving the following warning:
$ make W=1 arch/x86/kernel/cpu/feat_ctl.o
arch/x86/kernel/cpu/feat_ctl.c:112:6: warning: no previous prototype for ‘init_ia32_feat_ctl’ [-Wmissing-prototypes]
112 | void init_ia32_feat_ctl(struct cpuinfo_x86 *c)
This warning appeared after commit
5d5103595e ("x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup")
had moved the function init_ia32_feat_ctl()'s prototype from
arch/x86/kernel/cpu/cpu.h to arch/x86/include/asm/cpu.h.
Note that, before the commit mentioned above, the header include "cpu.h"
(arch/x86/kernel/cpu/cpu.h) was added by commit
0e79ad863d ("x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()")
solely to fix init_ia32_feat_ctl()'s missing prototype. So, the header
include "cpu.h" is no longer necessary.
[ bp: Massage commit message. ]
Fixes: 5d5103595e ("x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup")
Signed-off-by: Luciano Leão <lucianorsleao@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nícolas F. R. A. Prado <n@nfraprado.net>
Link: https://lore.kernel.org/r/20220922200053.1357470-1-lucianorsleao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 712f210a45 ]
In preparation for reducing the use of ksize(), record the actual
allocation size for later memcpy(). This avoids copying extra
(uninitialized!) bytes into the patch buffer when the requested
allocation size isn't exactly the size of a kmalloc bucket.
Additionally, fix potential future issues where runtime bounds checking
will notice that the buffer was allocated to a smaller value than
returned by ksize().
Fixes: 757885e94a ("x86, microcode, amd: Early microcode patch loading support for AMD")
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/lkml/CA+DvKQ+bp7Y7gmaVhacjv9uF6Ar-o4tet872h4Q8RPYPJjcJQA@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55b5ee3357 ]
The number of spatial streams used when acting as a beamformee in VHT
mode are reported by the firmware as 7 (8 sts - 1) both in IPQ6018 and
IPQ8074 which respectively have 2 and 4 sts each. So the firmware should
report 1 (2 - 1) and 3 (4 - 1).
Fix this by checking that the number of VHT beamformee sts reported by
the firmware is not greater than the number of receiving antennas - 1.
The fix is based on the same approach used in this same function for
sanitizing the number of sounding dimensions reported by the firmware.
Without this change, acting as a beamformee in VHT mode is not working
properly.
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220616173947.21901-1-jesus.manzano@galgus.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3124d320c2 ]
syzbot is reporting NULL pointer dereference at hci_uart_tty_close() [1],
for rcu_sync_enter() is called without rcu_sync_init() due to
hci_uart_tty_open() ignoring percpu_init_rwsem() failure.
While we are at it, fix that hci_uart_register_device() ignores
percpu_init_rwsem() failure and hci_uart_unregister_device() does not
call percpu_free_rwsem().
Link: https://syzkaller.appspot.com/bug?extid=576dfca25381fb6fbc5f [1]
Reported-by: syzbot <syzbot+576dfca25381fb6fbc5f@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 67d2f8781b ("Bluetooth: hci_ldisc: Allow sleeping while proto locks are held.")
Fixes: d73e172816 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83c10cc362 ]
The documentation for find_vpid() clearly states:
"Must be called with the tasklist_lock or rcu_read_lock() held."
Presently we do neither for find_vpid() instance in bpf_task_fd_query().
Add proper rcu_read_lock/unlock() to fix the issue.
Fixes: 41bdc4b40e ("bpf: introduce bpf subcommand BPF_TASK_FD_QUERY")
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220912133855.1218900-1-lee@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e963a19c64 ]
Found by comparing with the vendor driver. Currently this affects
only the RTL8192EU, which is the only gen2 chip with 2 TX paths
supported by this driver. It's unclear what kind of effect the
mistake had in practice, since I don't have any RTL8192EU devices
to test it.
Fixes: e1547c535e ("rtl8xxxu: First stab at adding IQK calibration for 8723bu parts")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/30a59f3a-cfa9-8379-7af0-78a8f4c77cfd@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a37a32583e ]
When trying to finish resolving a struct member, btf_struct_resolve
saves the member type id in a u16 temporary variable. This truncates
the 32 bit type id value if it exceeds UINT16_MAX.
As a result, structs that have members with type ids > UINT16_MAX and
which need resolution will fail with a message like this:
[67414] STRUCT ff_device size=120 vlen=12
effect_owners type_id=67434 bits_offset=960 Member exceeds struct_size
Fix this by changing the type of last_member_type_id to u32.
Fixes: a0791f0df7 ("bpf: fix BTF limits")
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Lorenz Bauer <oss@lmb.io>
Link: https://lore.kernel.org/r/20220910110120.339242-1-oss@lmb.io
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36acf80fc0 ]
Since [1], controller's busy flag isn't set anymore when the
__spi_transfer_message_noqueue() is used instead of the
__spi_pump_transfer_message() logic for spi_sync transfers.
Since the pow2 clock ops were limited to only be available when a
transfer is ongoing (between prepare_transfer_hardware and
unprepare_transfer_hardware callbacks), the only way to track this
down is to check for the controller cur_msg.
[1] ae7d2346dc ("spi: Don't use the message queue if possible in spi_sync")
Fixes: 09992025da ("spi: meson-spicc: add local pow2 clock ops to preserve rate between messages")
Fixes: ae7d2346dc ("spi: Don't use the message queue if possible in spi_sync")
Reported-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20220908121803.919943-1-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd3f106677 ]
WMT cmd/event doesn't follow up the generic HCI cmd/event handling, it
needs constantly polling control pipe until the host received the WMT
event, thus, we should require to specifically acquire PM counter on the
USB to prevent the interface from entering auto suspended while WMT
cmd/event in progress.
Fixes: a1c49c434e ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices")
Co-developed-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
