[ Upstream commit ca323b2c61 ]
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 604c31039d ("crypto: omap-sham - Check for return value from pm_runtime_get_sync")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57c126661f ]
Function nitrox_register_interrupts leaves variable 'nr_vecs' unchecked, which
would be use as kcalloc parameter later.
Fixes: 5155e118dd ("crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13dfead49d ]
Rename struct sms_msg_data4 to sms_msg_data5 and increase the size of
its msg_data array from 4 to 5 elements. Notice that at some point
the 5th element of msg_data is being accessed in function
smscore_load_firmware_family2():
1006 trigger_msg->msg_data[4] = 4; /* Task ID */
Also, there is no need for the object _trigger_msg_ of type struct
sms_msg_data *, when _msg_ can be used, directly. Notice that msg_data
in struct sms_msg_data is a one-element array, which causes multiple
out-of-bounds warnings when accessing beyond its first element
in function smscore_load_firmware_family2():
992 struct sms_msg_data *trigger_msg =
993 (struct sms_msg_data *) msg;
994
995 pr_debug("sending MSG_SMS_SWDOWNLOAD_TRIGGER_REQ\n");
996 SMS_INIT_MSG(&msg->x_msg_header,
997 MSG_SMS_SWDOWNLOAD_TRIGGER_REQ,
998 sizeof(struct sms_msg_hdr) +
999 sizeof(u32) * 5);
1000
1001 trigger_msg->msg_data[0] = firmware->start_address;
1002 /* Entry point */
1003 trigger_msg->msg_data[1] = 6; /* Priority */
1004 trigger_msg->msg_data[2] = 0x200; /* Stack size */
1005 trigger_msg->msg_data[3] = 0; /* Parameter */
1006 trigger_msg->msg_data[4] = 4; /* Task ID */
even when enough dynamic memory is allocated for _msg_:
929 /* PAGE_SIZE buffer shall be enough and dma aligned */
930 msg = kmalloc(PAGE_SIZE, GFP_KERNEL | coredev->gfp_buf_flags);
but as _msg_ is casted to (struct sms_msg_data *):
992 struct sms_msg_data *trigger_msg =
993 (struct sms_msg_data *) msg;
the out-of-bounds warnings are actually valid and should be addressed.
Fix this by declaring object _msg_ of type struct sms_msg_data5 *,
which contains a 5-elements array, instead of just 4. And use
_msg_ directly, instead of creating object trigger_msg.
This helps with the ongoing efforts to enable -Warray-bounds by fixing
the following warnings:
CC [M] drivers/media/common/siano/smscoreapi.o
drivers/media/common/siano/smscoreapi.c: In function ‘smscore_load_firmware_family2’:
drivers/media/common/siano/smscoreapi.c:1003:24: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1003 | trigger_msg->msg_data[1] = 6; /* Priority */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1004:24: warning: array subscript 2 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1004 | trigger_msg->msg_data[2] = 0x200; /* Stack size */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1005:24: warning: array subscript 3 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1005 | trigger_msg->msg_data[3] = 0; /* Parameter */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1006:24: warning: array subscript 4 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1006 | trigger_msg->msg_data[4] = 4; /* Task ID */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
Fixes: 018b0c6f8a ("[media] siano: make load firmware logic to work with newer firmwares")
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ed339f23d ]
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
Fix the gl860_RTx() helper so that zero-length control reads fail with
an error message instead. Note that there are no current callers that
would trigger this.
Fixes: 4f7cb8837c ("V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6b1e7093f ]
When the CSI bps per lane is not in the valid range, an appropriate error
code -EINVAL should be returned. However, we currently do not explicitly
assign this error code to 'ret'. As a result, 0 was incorrectly returned.
Fixes: 2561482468 ("[media] tc358743: support probe from device tree")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f2e452730 ]
The media_device_usb_allocate() function returns error pointers when
it's enabled and something goes wrong. It can return NULL as well, but
only if CONFIG_MEDIA_CONTROLLER is disabled so that doesn't apply here.
Fixes: 812658d88d ("media: change au0828 to use Media Device Allocator API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01fe904c9a ]
In isp_video_release, file->private_data is freed via
_vb2_fop_release()->v4l2_fh_release(). But the freed
file->private_data is still used in v4l2_fh_is_singular_file()
->v4l2_fh_is_singular(file->private_data), which is a use
after free bug.
My patch uses a variable 'is_singular_file' to avoid the uaf.
v3: https://lore.kernel.org/patchwork/patch/1419058/
Fixes: 34947b8aeb ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c87ae1a0d ]
'ret' is known to be 1 here. In fact 'i' is expected instead.
Store the return value of 'i2c_master_recv()' in 'ret' so that the error
message print the correct error code.
Fixes: acaa34bf06 ("media: rc: implement zilog transmitter")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49219d9b87 ]
EVM_SETUP_COMPLETE is defined as 0x80000000, which is larger than INT_MAX.
The "-fno-strict-overflow" compiler option properly prevents signaling
EVM that the EVM policy setup is complete. Define and read an unsigned
int.
Fixes: f00d797507 ("EVM: Allow userspace to signal an RSA key has been loaded")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfc1f378c8 ]
Iff platform_get_irq() fails (or returns IRQ0) and thus the polling mode
has to be used, ata_host_activate() hits the WARN_ON() due to 'irq_handler'
parameter being non-NULL if the polling mode is selected. Let's only set
the pointer to the driver's IRQ handler if platform_get_irq() returns a
valid IRQ # -- this should avoid the unnecessary WARN_ON()...
Fixes: 43f01da0f2 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/3a241167-f84d-1d25-5b9b-be910afbe666@omp.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8852c55240 ]
"OBJECT_FILES_NON_STANDARD_vma.o := n" has a dependency bug. When
objtool source is updated, the affected object doesn't get re-analyzed
by objtool.
Peter's new variable-sized jump label feature relies on objtool
rewriting the object file. Otherwise the system can fail to boot. That
effectively upgrades this minor dependency issue to a major bug.
The problem is that variables in prerequisites are expanded early,
during the read-in phase. The '$(objtool_dep)' variable indirectly uses
'$@', which isn't yet available when the target prerequisites are
evaluated.
Use '.SECONDEXPANSION:' which causes '$(objtool_dep)' to be expanded in
a later phase, after the target-specific '$@' variable has been defined.
Fixes: b9ab5ebb14 ("objtool: Add CONFIG_STACK_VALIDATION option")
Fixes: ab3257042c ("jump_label, x86: Allow short NOPs")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c33f12573 ]
Since the pre-git time the checker is run first, before the compiler.
But if the source file contains some syntax error, the warnings from
the compiler are more useful than those from sparse (and other
checker most probably too).
So move the 'check' command to run after the compiler.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93b7385870 ]
cpu_cgroup_css_online() calls cpu_util_update_eff() without holding the
uclamp_mutex or rcu_read_lock() like other call sites, which is
a mistake.
The uclamp_mutex is required to protect against concurrent reads and
writes that could update the cgroup hierarchy.
The rcu_read_lock() is required to traverse the cgroup data structures
in cpu_util_update_eff().
Surround the caller with the required locks and add some asserts to
better document the dependency in cpu_util_update_eff().
Fixes: 7226017ad3 ("sched/uclamp: Fix a bug in propagating uclamp value in new cgroups")
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210510145032.1934078-3-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c18f2ecfc ]
cpu.uclamp.min is a protection as described in cgroup-v2 Resource
Distribution Model
Documentation/admin-guide/cgroup-v2.rst
which means we try our best to preserve the minimum performance point of
tasks in this group. See full description of cpu.uclamp.min in the
cgroup-v2.rst.
But the current implementation makes it a limit, which is not what was
intended.
For example:
tg->cpu.uclamp.min = 20%
p0->uclamp[UCLAMP_MIN] = 0
p1->uclamp[UCLAMP_MIN] = 50%
Previous Behavior (limit):
p0->effective_uclamp = 0
p1->effective_uclamp = 20%
New Behavior (Protection):
p0->effective_uclamp = 20%
p1->effective_uclamp = 50%
Which is inline with how protections should work.
With this change the cgroup and per-task behaviors are the same, as
expected.
Additionally, we remove the confusing relationship between cgroup and
!user_defined flag.
We don't want for example RT tasks that are boosted by default to max to
change their boost value when they attach to a cgroup. If a cgroup wants
to limit the max performance point of tasks attached to it, then
cpu.uclamp.max must be set accordingly.
Or if they want to set different boost value based on cgroup, then
sysctl_sched_util_clamp_min_rt_default must be used to NOT boost to max
and set the right cpu.uclamp.min for each group to let the RT tasks
obtain the desired boost value when attached to that group.
As it stands the dependency on !user_defined flag adds an extra layer of
complexity that is not required now cpu.uclamp.min behaves properly as
a protection.
The propagation model of effective cpu.uclamp.min in child cgroups as
implemented by cpu_util_update_eff() is still correct. The parent
protection sets an upper limit of what the child cgroups will
effectively get.
Fixes: 3eac870a32 (sched/uclamp: Use TG's clamps to restrict TASK's clamps)
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210510145032.1934078-2-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8edcb5049a ]
The use of an enum named 'RST' conflicts with a #define macro
named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h.
The MIPS use of RST was there first (AFAICT), so change the
media/i2c/ uses of RST to be named 'RSET'.
'git grep -w RSET' does not report any naming conflicts with the
new name.
This fixes multiple build errors:
arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST'
356 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST'
180 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST'
238 | RST,
| ^~~
and some others that I have trimmed.
Fixes: cac47f1822 ("[media] V4L: Add S5C73M3 camera driver")
Fixes: 8b99312b72 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")
Fixes: 7d459937dc ("[media] Add driver for Samsung S5K5BAF camera sensor")
Fixes: bfa8dd3a05 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Sangwook Lee <sangwook.lee@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d3a62fbae ]
The driver overrides the error codes returned by platform_get_irq() to
-ENOENT, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...
Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/771ced55-3efb-21f5-f21c-b99920aae611@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a24efa16e ]
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...
Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/105b456d-1199-f6e9-ceb7-ffc5ba551d1a@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9395c58fdd ]
Testing ixp4xx_crypto with CONFIG_DMA_API_DEBUG lead to the following error:
DMA-API: platform ixp4xx_crypto.0: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=24 bytes]
This is due to dma_unmap using the wrong address.
Fixes: 0d44dc59b2 ("crypto: ixp4xx - Fix handling of chained sg buffers")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 747bad54a6 ]
There's a bug at s5p_cec_adap_enable(): if called to
disable the device, it should call pm_runtime_put()
instead of pm_runtime_disable(), as the goal here is to
decrement the usage_count and not to disable PM runtime.
Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 1bcbf6f4b6 ("[media] cec: s5p-cec: Add s5p-cec driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8826ee4fe7 ]
isw_nr_in_flight is used to determine whether the inode switch queue
should be flushed from the umount path. Currently it's increased after
grabbing an inode and even scheduling the switch work. It means the
umount path can walk past cleanup_offline_cgwb() with active inode
references, which can result in a "Busy inodes after unmount." message and
use-after-free issues (with inode->i_sb which gets freed).
Fix it by incrementing isw_nr_in_flight before doing anything with the
inode and decrementing in the case when switching wasn't scheduled.
The problem hasn't yet been seen in the real life and was discovered by
Jan Kara by looking into the code.
Link: https://lkml.kernel.org/r/20210608230225.2078447-4-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Jan Kara <jack@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5f320ff8a ]
gcc points out a mistake in the mca driver that goes back to before the
git history:
arch/ia64/kernel/mca_drv.c: In function 'init_record_index_pools':
arch/ia64/kernel/mca_drv.c:346:54: error: expression does not compute the number of elements in this array; element typ
e is 'int', not 'size_t' {aka 'long unsigned int'} [-Werror=sizeof-array-div]
346 | for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
| ^
This is the same as sizeof(size_t), which is two shorter than the actual
array. Use the ARRAY_SIZE() macro to get the correct calculation instead.
Link: https://lkml.kernel.org/r/20210514214123.875971-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2705dfb209 ]
ll_new_hw_segment() is reached only in case of single range discard
merge, and we don't have max discard segment size limit actually, so
it is wrong to run the following check:
if (req->nr_phys_segments + nr_phys_segs > blk_rq_get_max_segments(req))
it may be always false since req->nr_phys_segments is initialized as
one, and bio's segment count is still 1, blk_rq_get_max_segments(reg)
is 1 too.
Fix the issue by not doing the check and bypassing the calculation of
discard request's nr_phys_segments.
Based on analysis from Wang Shanker.
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Wang Shanker <shankerwangmiao@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210628023312.1903255-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0060a4f28a ]
In the other places where we update ses->status we protect the
updates via GlobalMid_Lock. So to be consistent add the same
locking around it in cifs_put_smb_ses where it was missing.
Addresses-Coverity: 1268904 ("Data race condition")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 424d823794 ]
The capacitive status of ExpressKeys is reported with usages beginning
at 0x940, not 0x950. Bring our driver into alignment with reality.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1059c1b11 ]
A custom DSDT file is mostly used during development or debugging,
and in that case it is quite likely to want to rebuild the kernel
after changing ONLY the content of the DSDT.
This patch adds the custom DSDT as a prerequisite to tables.o
to ensure a rebuild if the DSDT file is updated. Make will merge
the prerequisites from multiple rules for the same target.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db3a34e174 ]
When the clocksource watchdog marks a clock as unstable, this might be due
to that clock being unstable or it might be due to delays that happen to
occur between the reads of the two clocks. Yes, interrupts are disabled
across those two reads, but there are no shortage of things that can delay
interrupts-disabled regions of code ranging from SMI handlers to vCPU
preemption. It would be good to have some indication as to why the clock
was marked unstable.
Therefore, re-read the watchdog clock on either side of the read from the
clock under test. If the watchdog clock shows an excessive time delta
between its pair of reads, the reads are retried.
The maximum number of retries is specified by a new kernel boot parameter
clocksource.max_cswd_read_retries, which defaults to three, that is, up to
four reads, one initial and up to three retries. If more than one retry
was required, a message is printed on the console (the occasional single
retry is expected behavior, especially in guest OSes). If the maximum
number of retries is exceeded, the clock under test will be marked
unstable. However, the probability of this happening due to various sorts
of delays is quite small. In addition, the reason (clock-read delays) for
the unstable marking will be apparent.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-1-paulmck@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0a029fff4 ]
There's little to no point in loading an EDAC driver running in a guest:
1) The CPU model reported by CPUID may not represent actual h/w
2) The hypervisor likely does not pass in access to memory controller devices
3) Hypervisors generally do not pass corrected error details to guests
Add a check in each of the Intel EDAC drivers for X86_FEATURE_HYPERVISOR
and simply return -ENODEV in the init routine.
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210615174419.GA1087688@agluck-desk2.amr.corp.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a4a910aa4 ]
When parsing a request in nvmet_fc_handle_fcp_rqst() we should not
check for invalid target ports; if we do the command is aborted
from the fcp layer, causing the host to assume a transport error.
Rather we should still forward this request to the nvmet layer, which
will then correctly fail the command with an appropriate error status.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cafe29a8d ]
Yi reported several kernel panics on:
[16687.001777] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
[16687.163549] pc : __rq_qos_track+0x38/0x60
or
[ 997.690455] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[ 997.850347] pc : __rq_qos_done+0x2c/0x50
Turns out it is caused by race between adding rq qos(wbt) and normal IO
because rq_qos_add can be run when IO is being submitted, fix this issue
by freezing queue before adding/deleting rq qos to queue.
rq_qos_exit() needn't to freeze queue because it is called after queue
has been frozen.
iolatency calls rq_qos_add() during allocating queue, so freezing won't
add delay because queue usage refcount works at atomic mode at that
time.
iocost calls rq_qos_add() when writing cgroup attribute file, that is
fine to freeze queue at that time since we usually freeze queue when
storing to queue sysfs attribute, meantime iocost only exists on the
root cgroup.
wbt_init calls it in blk_register_queue() and queue sysfs attribute
store(queue_wb_lat_store() when write it 1st time in case of !BLK_WBT_MQ),
the following patch will speedup the queue freezing in wbt_init.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20210609015822.103433-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ec4e55e9f ]
The laptop keyboard doesn't work on many MEDION notebooks, but the
keyboard works well under Windows and Unix.
Through debugging, we found this log in the dmesg:
ACPI: IRQ 1 override to edge, high
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
And we checked the IRQ definition in the DSDT, it is:
IRQ (Level, ActiveLow, Exclusive, )
{1}
So the BIOS defines the keyboard IRQ to Level_Low, but the Linux
kernel override it to Edge_High. If the Linux kernel is modified
to skip the IRQ override, the keyboard will work normally.
From the existing comment in acpi_dev_get_irqresource(), the override
function only needs to be called when IRQ() or IRQNoFlags() is used
to populate the resource descriptor, and according to Section 6.4.2.1
of ACPI 6.4 [1], if IRQ() is empty or IRQNoFlags() is used, the IRQ
is High true, edge sensitive and non-shareable. ACPICA also assumes
that to be the case (see acpi_rs_set_irq[] in rsirq.c).
In accordance with the above, check 3 additional conditions
(EdgeSensitive, ActiveHigh and Exclusive) when deciding whether or
not to treat an ACPI_RESOURCE_TYPE_IRQ resource as "legacy", in which
case the IRQ override is applicable to it.
Link: https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#irq-descriptor # [1]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213031
BugLink: http://bugs.launchpad.net/bugs/1909814
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Manuel Krause <manuelkrause@netscape.net>
Tested-by: Manuel Krause <manuelkrause@netscape.net>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
[ rjw: Subject rewrite, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ac7a817f1 ]
Although the system will not be in a good condition or it will not
boot if acpi_bus_init() fails, it is still necessary to put the
kobject in the error path before returning to avoid leaking memory.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c27bac0314 ]
ACPICA commit 180cb53963aa876c782a6f52cc155d951b26051a
According to the ACPI spec, _CID returns a package containing
hardware ID's. Each element of an ASL package contains a reference
count from the parent package as well as the element itself.
Name (TEST, Package() {
"String object" // this package element has a reference count of 2
})
A memory leak was caused in the _CID repair function because it did
not decrement the reference count created by the package. Fix the
memory leak by calling acpi_ut_remove_reference on _CID package elements
that represent a hardware ID (_HID).
Link: https://github.com/acpica/acpica/commit/180cb539
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d327ea15a3 ]
sparse generates the following warning:
include/linux/prandom.h:114:45: sparse: sparse: cast truncates bits from
constant value
This is because the 64-bit seed value is manipulated and then placed in a
u32, causing an implicit cast and truncation. A forced cast to u32 doesn't
prevent this warning, which is reasonable because a typecast doesn't prove
that truncation was expected.
Logical-AND the value with 0xffffffff to make explicit that truncation to
32-bit is intended.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210525122012.6336-3-rf@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6aa00e3d2 ]
These rx tx flags arguments are for signaling close_connection() from
which worker they are called. Obviously the receive worker cannot cancel
itself and vice versa for swork. For the othercon the receive worker
should only be used, however to avoid deadlocks we should pass the same
flags as the original close_connection() was called.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12e0613715 ]
block_dump is an old debugging interface, one of it's functions is used
to print the information about who write which file on disk. If we
enable block_dump through /proc/sys/vm/block_dump and turn on debug log
level, we can gather information about write process name, target file
name and disk from kernel message. This feature is realized in
block_dump___mark_inode_dirty(), it print above information into kernel
message directly when marking inode dirty, so it is noisy and can easily
trigger log storm. At the same time, get the dentry refcount is also not
safe, we found it will lead to deadlock on ext4 file system with
data=journal mode.
After tracepoints has been introduced into the kernel, we got a
tracepoint in __mark_inode_dirty(), which is a better replacement of
block_dump___mark_inode_dirty(). The only downside is that it only trace
the inode number and not a file name, but it probably doesn't matter
because the original printed file name in block_dump is not accurate in
some cases, and we can still find it through the inode number and device
id. So this patch delete the dirting inode part of block_dump feature.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210313030146.2882027-2-yi.zhang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6306f04319 ]
More ASUS laptops have the _GPE define in the DSDT table with a
different value than the _GPE number in the ECDT.
This is causing media keys not working on ASUS X505BA/BP, X542BA/BP
Add model info to the quirks list.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 900fdc4573 ]
The existing code attempted to handle numbers by doing a strto[u]l(),
ignoring the field width, and then repeatedly dividing to extract the
field out of the full converted value. If the string contains a run of
valid digits longer than will fit in a long or long long, this would
overflow and no amount of dividing can recover the correct value.
This patch fixes vsscanf() to obey number field widths when parsing
the number.
A new _parse_integer_limit() is added that takes a limit for the number
of characters to parse. The number field conversion in vsscanf is changed
to use this new function.
If a number starts with a radix prefix, the field width must be long
enough for at last one digit after the prefix. If not, it will be handled
like this:
sscanf("0x4", "%1i", &i): i=0, scanning continues with the 'x'
sscanf("0x4", "%2i", &i): i=0, scanning continues with the '4'
This is consistent with the observed behaviour of userland sscanf.
Note that this patch does NOT fix the problem of a single field value
overflowing the target type. So for example:
sscanf("123456789abcdef", "%x", &i);
Will not produce the correct result because the value obviously overflows
INT_MAX. But sscanf will report a successful conversion.
Note that where a very large number is used to mean "unlimited", the value
INT_MAX is used for consistency with the behaviour of vsnprintf().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210514161206.30821-2-rf@opensource.cirrus.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65ea8f2c6e ]
Generally, the C-state latency is provided by the _CST method or
FADT, but some OEM platforms using AMD Picasso, Renoir, Van Gogh,
and Cezanne set the C2 latency greater than C3's which causes the
C2 state to be skipped.
That will block the core entering PC6, which prevents S0ix working
properly on Linux systems.
In other operating systems, the latency values are not validated and
this does not cause problems by skipping states.
To avoid this issue on Linux, detect when latencies are not an
arithmetic progression and sort them.
Link: 026d186e45
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1230#note_712174
Suggested-by: Prike Liang <Prike.Liang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2145f8dc5 ]
Action of unbinding driver from a device is not cancellable and should not
fail, and driver core does not pay attention to the result of "remove"
method, therefore using down_interruptible() in hid_device_remove() does
not make sense.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
