[ Upstream commit 6fabca2fc94d33cdf7ec102058983b086293395f ]
Syzkaller found a kernel warning on the following sock_addr program:
0: r0 = 0
1: r2 = *(u32 *)(r1 +60)
2: exit
which triggers:
verifier bug: error during ctx access conversion (0)
This is happening because offset 60 in bpf_sock_addr corresponds to an
implicit padding of 4 bytes, right after msg_src_ip4. Access to this
padding isn't rejected in sock_addr_is_valid_access and it thus later
fails to convert the access.
This patch fixes it by explicitly checking the various fields of
bpf_sock_addr in sock_addr_is_valid_access.
I checked the other ctx structures and is_valid_access functions and
didn't find any other similar cases. Other cases of (properly handled)
padding are covered in new tests in a subsequent patch.
Fixes: 1cedee13d2 ("bpf: Hooks for sys_sendmsg")
Reported-by: syzbot+136ca59d411f92e821b7@syzkaller.appspotmail.com
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=136ca59d411f92e821b7
Link: https://lore.kernel.org/bpf/b58609d9490649e76e584b0361da0abd3c2c1779.1758094761.git.paul.chaignon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8cfc524eaf3c0ed88106177edb6961e202e6716 ]
Check if watchdog device supports WDIOF_KEEPALIVEPING option before
entering keep_alive() ping test loop. Fix watchdog-test silently looping
if ioctl based ping is not supported by the device. Exit from test in
such case instead of getting stuck in loop executing failing keep_alive()
watchdog_info:
identity: m41t93 rtc Watchdog
firmware_version: 0
Support/Status: Set timeout (in seconds)
Support/Status: Watchdog triggers a management or other external alarm not a reboot
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
WDIOC_KEEPALIVE not supported by this device
without this change
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
Watchdog Ticking Away!
(Where test stuck here forver silently)
Updated change log at commit time:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250914152840.GA3047348@bhairav-test.ee.iitb.ac.in
Fixes: d89d08ffd2 ("selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3448a934ba6f803911ac084d05a2ffce507ea6c6 ]
In svc_i3c_master_handle_ibi(), an IBI slot is fetched from the pool
to store the IBI payload. However, when an error condition is encountered,
the function returns without recycling the IBI slot, resulting in an IBI
slot leak.
Fixes: c85e209b799f ("i3c: master: svc: fix ibi may not return mandatory data byte")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250829012309.3562585-3-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7869b0a2540fd122eccec00ae7d4243166b0a60 ]
Driver wants to nack the IBI request when the target is not in the
known address list. In below code, svc_i3c_master_nack_ibi() will
cause undefined behavior when using AUTOIBI with auto response rule,
because hw always auto ack the IBI request.
switch (ibitype) {
case SVC_I3C_MSTATUS_IBITYPE_IBI:
dev = svc_i3c_master_dev_from_addr(master, ibiaddr);
if (!dev || !is_events_enabled(master, SVC_I3C_EVENT_IBI))
svc_i3c_master_nack_ibi(master);
...
break;
AutoIBI has another issue that the controller doesn't quit AutoIBI state
after IBIWON polling timeout when there is a SDA glitch(high->low->high).
1. SDA high->low: raising an interrupt to execute IBI ISR
2. SDA low->high
3. Driver writes an AutoIBI request
4. AutoIBI process does not start because SDA is not low
5. IBIWON polling times out
6. Controller reamins in AutoIBI state and doesn't accept EmitStop request
Emitting broadcast address with IBIRESP_MANUAL avoids both issues.
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250829012309.3562585-2-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db5a5406fb7e5337a074385c7a3e53c77f2c1bd3 ]
It’s possible for more than one async command to be in flight from
__nvmet_fc_send_ls_req. For each command, a tgtport reference is taken.
In the current code, only one put work item is queued at a time, which
results in a leaked reference.
To fix this, move the work item to the nvmet_fc_ls_req_op struct, which
already tracks all resources related to the command.
Fixes: 710c69dbaccd ("nvmet-fc: avoid deadlock on delete association path")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ca944fea4d6d9019e01f2d6f6e766f315a9d73f ]
ACPI_RESOURCE_NAME_LARGE_MAX should be equal to the last actually
used resource descriptor index (ACPI_RESOURCE_NAME_CLOCK_INPUT).
Otherwise 'resource_index' in 'acpi_ut_validate_resource()' may be
clamped incorrectly and resulting value may issue an out-of-bounds
access for 'acpi_gbl_resource_types' array. Compile tested only.
Fixes: 520d4a0ee5 ("ACPICA: add support for ClockInput resource (v6.5)")
Link: https://github.com/acpica/acpica/commit/cf00116c
Link: https://marc.info/?l=linux-acpi&m=175449676131260&w=2
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00f83f0e07e44e2f1fb94b223e77ab7b18ee2d7d ]
The function set_prescale_div() is responsible for calculating the clock
divisor settings such that the input clock rate is divided down such that
the required period length is at most 0x10000 clock ticks. If period_cycles
is an integer multiple of 0x10000, the divisor period_cycles / 0x10000 is
good enough. So round up in the calculation of the required divisor and
compare it using >= instead of >.
Fixes: 19891b20e7 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/85488616d7bfcd9c32717651d0be7e330e761b9c.1754927682.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdc06f912670c8c199d5fa9e78b64b7ed8e871d0 ]
Make sure to drop the reference to the saw device taken by
of_find_device_by_node() after retrieving its driver data during
probe().
Also drop the reference to the CPU node sooner to avoid leaking it in
case there is no saw node or device.
Fixes: 60f3692b5f ("cpuidle: qcom_spm: Detach state machine from main SPM handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3374b5fb26b300809ecd6aed9f414987dd17c313 ]
When test suspend resume with 6.8 based kernel, system can't resume
and I got below error which can be also reproduced with 6.16 rc6+
kernel.
mtk-pcie-gen3 112f0000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0)
mtk-pcie-gen3 112f0000.pcie: PM: dpm_run_callback(): genpd_resume_noirq returns -110
mtk-pcie-gen3 112f0000.pcie: PM: failed to resume noirq: error -110
After investigation, looks pcie0 has the same problem as pcie1 as
decribed in commit 3d7fdd8e38aa ("arm64: dts: mediatek: mt8195:
Remove suspend-breaking reset from pcie1").
Fixes: ecc0af6a3f ("arm64: dts: mt8195: Add pcie and pcie phy nodes")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250721095959.57703-1-guoqing.jiang@canonical.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7942b226e6b84df13b46b76c01d3b6e07a1b349e ]
When executing modinfo null_blk, there is an error in the description
of module parameter mbps, and the output information of cache_size is
incomplete.The output of modinfo before and after applying this patch
is as follows:
Before:
[...]
parm: cache_size:ulong
[...]
parm: mbps:Cache size in MiB for memory-backed device.
Default: 0 (none) (uint)
[...]
After:
[...]
parm: cache_size:Cache size in MiB for memory-backed device.
Default: 0 (none) (ulong)
[...]
parm: mbps:Limit maximum bandwidth (in MiB/s).
Default: 0 (no limit) (uint)
[...]
Fixes: 058efe000b ("null_blk: add module parameters for 4 options")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit def5612170a8c6c4c6a3ea5bd6c3cfc8de6ba4b1 ]
Fix the checkpatch warning:
CHECK: Alignment should match open parenthesis
Fixes: 0cb172a491 ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27322753c8b913fba05250e7b5abb1da31e6ed23 ]
The dtbs_check validation for am335x-cm-t335.dtb flags an error
for an unevaluated 'num-serializer' property in the mcasp0 node.
This property is obsolete; it is not defined in the davinci-mcasp-audio
schema and is not used by the corresponding (or any) driver.
Remove this unused property to fix the schema validation warning.
Fixes: 48ab364478 ("ARM: dts: cm-t335: add audio support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250830215957.285694-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af5b85505bc859adb338fe5d6e4842e72cdf932 ]
The ti,keep-vref-on property, defined as a boolean flag in the Device
Tree schema, was incorrectly assigned a value (<1>) in the DTS file,
causing a validation error: "size (4) error for type flag". Remove
the value to match the schema and ensure compatibility with the driver
using device_property_read_bool(). This fixes the dtbs_check error.
Fixes: ed05637c30 ("ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250822225052.136919-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be82483d1b60baf6747884bd74cb7de484deaf76 ]
If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them. Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.
If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).
Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.
Fixes: 0d4b54c6fe ("PM / core: Add LEAVE_SUSPENDED driver flag")
Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d35d068fb138160709e04e3ee97fe29a6f8615b ]
Change the 'ret' variable from u32 to int to store negative error codes or
zero returned by of_property_read_u32().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: 0fbeae70ee ("regulator: add SCMI driver")
Link: https://patch.msgid.link/20250829101411.625214-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e08cdd604edcec2c277af17c7d36caf827057ff ]
PCIe `port01` of t8103-j457 (iMac, M1, 2 USB-C ports, 2021) is unused
and disabled. Linux' PCI subsystem assigns the ethernet nic from
`port02` to bus 02. This results into assigning `pcie0_dart_1` from the
disabled port as iommu. The `pcie0_dart_1` instance is disabled and
probably fused off (it is on the M2 Pro Mac mini which has a disabled
PCIe port as well).
Without iommu the ethernet nic is not expected work.
Adjusts the "bus-range" and the PCIe devices "reg" property to PCI
subsystem's bus number.
Fixes: 7c77ab91b3 ("arm64: dts: apple: Add missing M1 (t8103) devices")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250823-apple-dt-sync-6-17-v2-1-6dc0daeb4786@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 296302d3d81360e09fa956e9be9edc8223b69a12 ]
The at91_mckx_ps_restore() assembly function is responsible for setting
back MCKx system bus clocks after exiting low power modes.
Fix a typo and use tmp3 variable instead of tmp2 to correctly set MCKx
to previously saved state.
Tmp2 was used without the needed changes in CSS and DIV. Moreover the
required bit 7, telling that MCR register's content is to be changed
(CMD/write), was not set.
Fix function comment to match tmp variables actually used.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 28eb1d40fe ("ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes")
Link: https://lore.kernel.org/r/20250827145427.46819-3-nicolas.ferre@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[claudiu.beznea: s/sate/state in commit description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c7ef92f6d4d08a27d676e4c348f4e2922cab3ed ]
In __blk_mq_update_nr_hw_queues() the return value of
blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx
fails, later changing the number of hw_queues or removing disk will
trigger the following warning:
kernfs: can not remove 'nr_tags', no directory
WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160
Call Trace:
remove_files.isra.1+0x38/0xb0
sysfs_remove_group+0x4d/0x100
sysfs_remove_groups+0x31/0x60
__kobject_del+0x23/0xf0
kobject_del+0x17/0x40
blk_mq_unregister_hctx+0x5d/0x80
blk_mq_sysfs_unregister_hctxs+0x94/0xd0
blk_mq_update_nr_hw_queues+0x124/0x760
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_submit_queues_store+0x92/0x120 [null_blk]
kobjct_del() was called unconditionally even if sysfs creation failed.
Fix it by checkig the kobject creation statusbefore deleting it.
Fixes: 477e19dedc ("blk-mq: adjust debugfs and sysfs register when updating nr_hw_queues")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250826084854.1030545-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f87412d18edb5b8393eb8cb1c2d4a54f90185a21 ]
Unconditionally clear the TCS_AMC_MODE_TRIGGER bit when a
transaction completes. Previously this bit was only cleared when
a wake TCS was borrowed as an AMC TCS but not for dedicated
AMC TCS. Leaving this bit set for AMC TCS and entering deeper low
power modes can generate a false completion IRQ.
Prevent this scenario by always clearing the TCS_AMC_MODE_TRIGGER
bit upon receiving a completion IRQ.
Fixes: 15b3bf61b8 ("soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-rpmh_rsc_change-v1-1-138202c31bf6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11b3de1c03fa9f3b5d17e6d48050bc98b3704420 ]
The cpuidle device's memory is leaked when cpuidle device registration
fails in acpi_processor_power_init(). Free it as appropriate.
Fixes: 3d339dcbb5 ("cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20250728070612.1260859-2-lihuisong@huawei.com
[ rjw: Changed the order of the new statements, added empty line after if () ]
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd5d4621ba846dad9b2e6b0c2d1518d083fcfa13 ]
Broadcom STB platforms were early adopters (2017) of the SCMI framework and as
a result, not all deployed systems have a Device Tree entry where SCMI
protocol 0x13 (PERFORMANCE) is declared as a clock provider, nor are the
CPU Device Tree node(s) referencing protocol 0x13 as their clock
provider. This was clarified in commit e11c480b6df1 ("dt-bindings:
firmware: arm,scmi: Extend bindings for protocol@13") in 2023.
For those platforms, we allow the checks done by scmi_dev_used_by_cpus()
to continue, and in the event of not having done an early return, we key
off the documented compatible string and give them a pass to continue to
use scmi-cpufreq.
Fixes: 6c9bb8692272 ("cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c6b4146deb12d20f42490d5013f2043df942161 ]
Previously, re-using pinned DEVMAP maps would always fail, because
get_map_info on a DEVMAP always returns flags with BPF_F_RDONLY_PROG set,
but BPF_F_RDONLY_PROG being set on a map during creation is invalid.
Thus, ignore the BPF_F_RDONLY_PROG flag in the flags returned from
get_map_info when checking for compatibility with an existing DEVMAP.
The same problem is handled in a third-party ebpf library:
- https://github.com/cilium/ebpf/issues/925
- https://github.com/cilium/ebpf/pull/930
Fixes: 0cdbb4b09a ("devmap: Allow map lookups from eBPF")
Signed-off-by: Yureka Lilian <yuka@yuka.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814180113.1245565-3-yuka@yuka.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abdaf49be5424db74e19d167c10d7dad79a0efc2 ]
Graph tracer framework ensures we won't migrate, kprobe_multi_link_prog_run
called all the way from graph tracer, which disables preemption in
function_graph_enter_regs, as Jiri and Yonghong suggested, there is no
need to use migrate_disable. As a result, some overhead may will be reduced.
And add cant_sleep check for __this_cpu_inc_return.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814121430.2347454-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c80d79720647ed77ebc0198abd5a0807efdaff0b ]
Based on a bisect, it appears that commit 7ee988770326 ("timers:
Implement the hierarchical pull model") has somehow inadvertently
broken BPF selftest test_tcpnotify_user. The error that is being
generated by this test is as follows:
FAILED: Wrong stats Expected 10 calls, got 8
It looks like the change allows timer functions to be run on CPUs
different from the one they are armed on. The test had pinned itself
to CPU 0, and in the past the retransmit attempts also occurred on CPU
0. The test had set the max_entries attribute for
BPF_MAP_TYPE_PERF_EVENT_ARRAY to 2 and was calling
bpf_perf_event_output() with BPF_F_CURRENT_CPU, so the entry was
likely to be in range. With the change to allow timers to run on other
CPUs, the current CPU tasked with performing the retransmit might be
bumped and in turn fall out of range, as the event will be filtered
out via __bpf_perf_event_output() using:
if (unlikely(index >= array->map.max_entries))
return -E2BIG;
A possible change would be to explicitly set the max_entries attribute
for perf_event_map in test_tcpnotify_kern.c to a value that's at least
as large as the number of CPUs. As it turns out however, if the field
is left unset, then the libbpf will determine the number of CPUs available
on the underlying system and update the max_entries attribute accordingly
in map_set_def_max_entries().
A further problem with the test is that it has a thread that continues
running up until the program exits. The main thread cleans up some
LIBBPF data structures, while the other thread continues to use them,
which inevitably will trigger a SIGSEGV. This can be dealt with by
telling the thread to run for as long as necessary and doing a
pthread_join on it before exiting the program.
Finally, I don't think binding the process to CPU 0 is meaningful for
this test any more, so get rid of that.
Fixes: 435f90a338 ("selftests/bpf: add a test case for sock_ops perf-event notification")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/aJ8kHhwgATmA3rLf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae014fbc99c7f986ee785233e7a5336834e39af4 ]
On RZ/G2LC SMARC EVK, CAN-FD channel0 is not populated, and currently we
are deleting a wrong and nonexistent node. Fixing the wrong node would
invoke a dtb warning message, as channel0 is a required property.
Disable CAN-FD channel0 instead of deleting the node.
Fixes: 46da632734 ("arm64: dts: renesas: rzg2lc-smarc: Enable CANFD channel 1")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250801121959.267424-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac9c408ed19d535289ca59200dd6a44a6a2d6036 ]
RDPID instruction outputs to a word-sized register (64-bit on x86_64 and
32-bit on x86_32). Use an unsigned long variable to store the correct size.
LSL outputs to 32-bit register, use %k operand prefix to always print the
32-bit name of the register.
Use RDPID insn mnemonic while at it as the minimum binutils version of
2.30 supports it.
[ bp: Merge two patches touching the same function into a single one. ]
Fixes: ffebbaedc8 ("x86/vdso: Introduce helper functions for CPU and node number")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250616095315.230620-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e6fe1bbefd9c059c3787d1c620fe67343a94dff ]
When loading the i10nm_edac driver on some Intel Granite Rapids servers,
a call trace may appear as follows:
UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16
shift exponent -66 is negative
...
__ubsan_handle_shift_out_of_bounds+0x1e3/0x390
skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common]
i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac]
skx_register_mci+0x159/0x220 [skx_edac_common]
i10nm_init+0xcb0/0x1ff0 [i10nm_edac]
...
This occurs because some BIOS may disable a memory controller if there
aren't any memory DIMMs populated on this memory controller. The DIMMMTR
register of this disabled memory controller contains the invalid value
~0, resulting in the call trace above.
Fix this call trace by skipping DIMM enumeration on a disabled memory
controller.
Fixes: ba987eaaab ("EDAC/i10nm: Add Intel Granite Rapids server support")
Reported-by: Jose Jesus Ambriz Meza <jose.jesus.ambriz.meza@intel.com>
Reported-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Closes: https://lore.kernel.org/all/20250730063155.2612379-1-acelan.kao@canonical.com/
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Link: https://lore.kernel.org/r/20250806065707.3533345-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fad988a2158d743da7971884b93482a73735b25e ]
Already do real negotiation in smb_direct_handle_connect_request()
where we see the requested initiator_depth and responder_resources
from the client.
We should detect legacy iwarp clients using MPA v1
with the custom IRD/ORD negotiation.
We need to send the custom IRD/ORD in big endian,
but we need to try to let clients with broken requests
using little endian (older cifs.ko) to work.
Note the reason why this uses u8 for
initiator_depth and responder_resources is
that the rdma layer also uses it.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: linux-rdma@vger.kernel.org
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a29fea30dd93da16652930162b177941abd8c75e ]
Cast nr_pages to unsigned long to avoid overflow when handling large
AUX buffer sizes (>= 2 GiB).
Fixes: d5d9696b03 ("drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 105f56877f2d5f82d71e20b45eb7be7c24c3d908 ]
Cast nr_pages to unsigned long to avoid overflow when handling large
AUX buffer sizes (>= 2 GiB).
Fixes: 3fbf7f011f ("coresight: sink: Add TRBE driver")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061df28b82af6b22fb5fa529a8f2ef00474ee004 ]
Commit 865cc3e9cc ("gfs2: fix a deadlock on withdraw-during-mount")
added a statement to do_xmote() to clear the GLF_INVALIDATE_IN_PROGRESS
flag a second time after it has already been cleared. Fix that.
Fixes: 865cc3e9cc ("gfs2: fix a deadlock on withdraw-during-mount")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a679e5683d3eef22ca12514ff8784b2b914ebedc ]
Fix -Wunused-result warning generated when compiled with gcc 13.3.0,
by checking fread's return value and handling errors, preventing
potential failures when reading from stdin.
Fixes compiler warning:
warning: ignoring return value of 'fread' declared with attribute
'warn_unused_result' [-Wunused-result]
Fixes: 806a15b254 ("kselftests/arm64: add PAuth test for whether exec() changes keys")
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cce436aafc2abad691fdd37de63ec8a4490b42ce ]
Normally the tracee starts in SECCOMP_NOTIFY_INIT, sends an
event to the tracer, and starts to wait interruptibly. With
SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV, if the tracer receives the
message (SECCOMP_NOTIFY_SENT is reached) while the tracee was waiting
and is subsequently interrupted, the tracee begins to wait again
uninterruptibly (but killable).
This fails if SECCOMP_NOTIFY_REPLIED is reached before the tracee
is interrupted, as the check only considered SECCOMP_NOTIFY_SENT as a
condition to begin waiting again. In this case the tracee is interrupted
even though the tracer already acted on its behalf. This breaks the
assumption SECCOMP_FILTER_FLAG_WAIT_KILLABLE_RECV wanted to ensure,
namely that the tracer can be sure the syscall is not interrupted or
restarted on the tracee after it is received on the tracer. Fix this
by also considering SECCOMP_NOTIFY_REPLIED when evaluating whether to
switch to uninterruptible waiting.
With the condition changed the loop in seccomp_do_user_notification()
would exit immediately after deciding that noninterruptible waiting
is required if the operation already reached SECCOMP_NOTIFY_REPLIED,
skipping the code that processes pending addfd commands first. Prevent
this by executing the remaining loop body one last time in this case.
Fixes: c2aa2dfef2 ("seccomp: Add wait_killable semantic to seccomp user notifier")
Reported-by: Ali Polatel <alip@chesswob.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220291
Signed-off-by: Johannes Nixdorf <johannes@nixdorf.dev>
Link: https://lore.kernel.org/r/20250725-seccomp-races-v2-1-cf8b9d139596@nixdorf.dev
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74792608606a525a0e0df7e8d48acd8000561389 ]
INITRAMFS_PRESERVE_MTIME is only used in init/initramfs.c and
init/initramfs_test.c. Hence add a dependency on BLK_DEV_INITRD, to
prevent asking the user about this feature when configuring a kernel
without initramfs support.
Fixes: 1274aea127 ("initramfs: add INITRAMFS_PRESERVE_MTIME Kconfig option")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
