commit 29eefa6d0d upstream.
Pausing and canceling balance can race to interrupt balance lead to BUG_ON
panic in btrfs_cancel_balance. The BUG_ON condition in btrfs_cancel_balance
does not take this race scenario into account.
However, the race condition has no other side effects. We can fix that.
Reproducing it with panic trace like this:
kernel BUG at fs/btrfs/volumes.c:4618!
RIP: 0010:btrfs_cancel_balance+0x5cf/0x6a0
Call Trace:
<TASK>
? do_nanosleep+0x60/0x120
? hrtimer_nanosleep+0xb7/0x1a0
? sched_core_clone_cookie+0x70/0x70
btrfs_ioctl_balance_ctl+0x55/0x70
btrfs_ioctl+0xa46/0xd20
__x64_sys_ioctl+0x7d/0xa0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Race scenario as follows:
> mutex_unlock(&fs_info->balance_mutex);
> --------------------
> .......issue pause and cancel req in another thread
> --------------------
> ret = __btrfs_balance(fs_info);
>
> mutex_lock(&fs_info->balance_mutex);
> if (ret == -ECANCELED && atomic_read(&fs_info->balance_pause_req)) {
> btrfs_info(fs_info, "balance: paused");
> btrfs_exclop_balance(fs_info, BTRFS_EXCLOP_BALANCE_PAUSED);
> }
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: xiaoshoukui <xiaoshoukui@ruijie.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c962098ca4 upstream.
In production we were seeing a variety of WARN_ON()'s in the extent_map
code, specifically in btrfs_drop_extent_map_range() when we have to call
add_extent_mapping() for our second split.
Consider the following extent map layout
PINNED
[0 16K) [32K, 48K)
and then we call btrfs_drop_extent_map_range for [0, 36K), with
skip_pinned == true. The initial loop will have
start = 0
end = 36K
len = 36K
we will find the [0, 16k) extent, but since we are pinned we will skip
it, which has this code
start = em_end;
if (end != (u64)-1)
len = start + len - em_end;
em_end here is 16K, so now the values are
start = 16K
len = 16K + 36K - 16K = 36K
len should instead be 20K. This is a problem when we find the next
extent at [32K, 48K), we need to split this extent to leave [36K, 48k),
however the code for the split looks like this
split->start = start + len;
split->len = em_end - (start + len);
In this case we have
em_end = 48K
split->start = 16K + 36K // this should be 16K + 20K
split->len = 48K - (16K + 36K) // this overflows as 16K + 36K is 52K
and now we have an invalid extent_map in the tree that potentially
overlaps other entries in the extent map. Even in the non-overlapping
case we will have split->start set improperly, which will cause problems
with any block related calculations.
We don't actually need len in this loop, we can simply use end as our
end point, and only adjust start up when we find a pinned extent we need
to skip.
Adjust the logic to do this, which keeps us from inserting an invalid
extent map.
We only skip_pinned in the relocation case, so this is relatively rare,
except in the case where you are running relocation a lot, which can
happen with auto relocation on.
Fixes: 55ef689900 ("Btrfs: Fix btrfs_drop_extent_cache for skip pinned case")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 282069845a upstream.
Do not read the data register to clear the error flags for lpuart32
platforms, the additional read may cause the receive FIFO underflow
since the DMA has already read the data register.
Actually all lpuart32 platforms support write 1 to clear those error
bits, let's use this method to better clear the error flags.
Fixes: 42b68768e5 ("serial: fsl_lpuart: DMA support for 32-bit variant")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20230801022304.24251-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c4f8333b5 upstream.
In commit 9b9c8195f3 ("tty: n_gsm: fix UAF in gsm_cleanup_mux"), the UAF
problem is not completely fixed. There is a race condition in
gsm_cleanup_mux(), which caused this UAF.
The UAF problem is triggered by the following race:
task[5046] task[5054]
----------------------- -----------------------
gsm_cleanup_mux();
dlci = gsm->dlci[0];
mutex_lock(&gsm->mutex);
gsm_cleanup_mux();
dlci = gsm->dlci[0]; //Didn't take the lock
gsm_dlci_release(gsm->dlci[i]);
gsm->dlci[i] = NULL;
mutex_unlock(&gsm->mutex);
mutex_lock(&gsm->mutex);
dlci->dead = true; //UAF
Fix it by assigning values after mutex_lock().
Link: https://syzkaller.appspot.com/text?tag=CrashReport&x=176188b5a80000
Cc: stable <stable@kernel.org>
Fixes: 9b9c8195f3 ("tty: n_gsm: fix UAF in gsm_cleanup_mux")
Fixes: aa371e96f0 ("tty: n_gsm: fix restart handling via CLD command")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Signed-off-by: Qiumiao Zhang <zhangqiumiao1@huawei.com>
Link: https://lore.kernel.org/r/20230811031121.153237-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d6ba607d6 upstream.
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa max vqp attr to avoid
such bugs.
Fixes: ad69dd0bf2 ("vdpa: Introduce query of device config layout")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: stable@vger.kernel.org
Message-Id: <20230727175757.73988-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3003e1b54 upstream.
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa queue index attr to avoid
such bugs.
Fixes: 13b00b1356 ("vdpa: Add support for querying vendor statistics")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: stable@vger.kernelorg
Message-Id: <20230727175757.73988-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79c8651587 upstream.
The vdpa_nl_policy structure is used to validate the nlattr when parsing
the incoming nlmsg. It will ensure the attribute being described produces
a valid nlattr pointer in info->attrs before entering into each handler
in vdpa_nl_ops.
That is to say, the missing part in vdpa_nl_policy may lead to illegal
nlattr after parsing, which could lead to OOB read just like CVE-2023-3773.
This patch adds the missing nla_policy for vdpa features attr to avoid
such bugs.
Fixes: 90fea5a800 ("vdpa: device feature provisioning")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: stable@vger.kernel.org
Message-Id: <20230727175757.73988-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f3175979e upstream.
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the
/proc/powerpc/rtas/firmware_update interface to prepare a system
firmware update yields a BUG():
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000
REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c
CFAR: c0000000001fbd34 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP usercopy_abort+0xa0/0xb0
LR usercopy_abort+0x9c/0xb0
Call Trace:
usercopy_abort+0x9c/0xb0 (unreliable)
__check_heap_object+0x1b4/0x1d0
__check_object_size+0x2d0/0x380
rtas_flash_write+0xe4/0x250
proc_reg_write+0xfc/0x160
vfs_write+0xfc/0x4e0
ksys_write+0x90/0x160
system_call_exception+0x178/0x320
system_call_common+0x160/0x2c4
The blocks of the firmware image are copied directly from user memory
to objects allocated from flash_block_cache, so flash_block_cache must
be created using kmem_cache_create_usercopy() to mark it safe for user
access.
Fixes: 6d07d1cd30 ("usercopy: Restrict non-usercopy caches to size 0")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[mpe: Trim and indent oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0872b2c0ab upstream.
in mmphw_probe(), check the return value of clk_prepare_enable()
and return the error code if clk_prepare_enable() returns an
unexpected value.
Fixes: d63028c389 ("video: mmp display controller support")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27ec43c77b upstream.
Tegra processors prior to Tegra186 used APB DMA for I2C requiring
CONFIG_TEGRA20_APB_DMA=y while Tegra186 and later use GPC DMA requiring
CONFIG_TEGRA186_GPC_DMA=y.
The check for if the processor uses APB DMA is inverted and so the wrong
DMA config options are checked.
This means if CONFIG_TEGRA20_APB_DMA=y but CONFIG_TEGRA186_GPC_DMA=n
with a Tegra186 or later processor the driver will incorrectly think DMA is
enabled and attempt to request DMA channels that will never be availible,
leaving the driver in a perpetual EPROBE_DEFER state.
Fixes: 48cb6356fa ("i2c: tegra: Add GPCDMA support")
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://lore.kernel.org/r/fcfcf9b3-c8c4-9b34-2ff8-cd60a3d490bd@connecttech.com
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4caf4cb1ea upstream.
iproc_i2c_rd_reg() and iproc_i2c_wr_reg() are called from both
interrupt context (e.g. bcm_iproc_i2c_isr) and process context
(e.g. bcm_iproc_i2c_suspend). Therefore, interrupts should be
disabled to avoid potential deadlock. To prevent this scenario,
use spin_lock_irqsave().
Fixes: 9a10387280 ("i2c: iproc: add NIC I2C support")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e8f5f849ff ]
With deferred close we can have closes that race with lease breaks,
and so with the current checks for whether to send the lease response,
oplock_response(), this can mean that an unmount (kill_sb) can occur
just before we were checking if the tcon->ses is valid. See below:
[Fri Aug 4 04:12:50 2023] RIP: 0010:cifs_oplock_break+0x1f7/0x5b0 [cifs]
[Fri Aug 4 04:12:50 2023] Code: 7d a8 48 8b 7d c0 c0 e9 02 48 89 45 b8 41 89 cf e8 3e f5 ff ff 4c 89 f7 41 83 e7 01 e8 82 b3 03 f2 49 8b 45 50 48 85 c0 74 5e <48> 83 78 60 00 74 57 45 84 ff 75 52 48 8b 43 98 48 83 eb 68 48 39
[Fri Aug 4 04:12:50 2023] RSP: 0018:ffffb30607ddbdf8 EFLAGS: 00010206
[Fri Aug 4 04:12:50 2023] RAX: 632d223d32612022 RBX: ffff97136944b1e0 RCX: 0000000080100009
[Fri Aug 4 04:12:50 2023] RDX: 0000000000000001 RSI: 0000000080100009 RDI: ffff97136944b188
[Fri Aug 4 04:12:50 2023] RBP: ffffb30607ddbe58 R08: 0000000000000001 R09: ffffffffc08e0900
[Fri Aug 4 04:12:50 2023] R10: 0000000000000001 R11: 000000000000000f R12: ffff97136944b138
[Fri Aug 4 04:12:50 2023] R13: ffff97149147c000 R14: ffff97136944b188 R15: 0000000000000000
[Fri Aug 4 04:12:50 2023] FS: 0000000000000000(0000) GS:ffff9714f7c00000(0000) knlGS:0000000000000000
[Fri Aug 4 04:12:50 2023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Fri Aug 4 04:12:50 2023] CR2: 00007fd8de9c7590 CR3: 000000011228e000 CR4: 0000000000350ef0
[Fri Aug 4 04:12:50 2023] Call Trace:
[Fri Aug 4 04:12:50 2023] <TASK>
[Fri Aug 4 04:12:50 2023] process_one_work+0x225/0x3d0
[Fri Aug 4 04:12:50 2023] worker_thread+0x4d/0x3e0
[Fri Aug 4 04:12:50 2023] ? process_one_work+0x3d0/0x3d0
[Fri Aug 4 04:12:50 2023] kthread+0x12a/0x150
[Fri Aug 4 04:12:50 2023] ? set_kthread_struct+0x50/0x50
[Fri Aug 4 04:12:50 2023] ret_from_fork+0x22/0x30
[Fri Aug 4 04:12:50 2023] </TASK>
To fix this change the ordering of the checks before sending the oplock_response
to first check if the openFileList is empty.
Fixes: da787d5b74 ("SMB3: Do not send lease break acknowledgment if all file handles have been closed")
Suggested-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad03a0f44c ]
mlx5_vdpa_destroy_mr can be called from .set_map with data ASID after
the control virtqueue ASID iotlb has been populated. The control vq
iotlb must not be cleared, since it will not be populated again.
So call the ASID aware destroy function which makes sure that the
right vq resource is destroyed.
Fixes: 8fcd20c307 ("vdpa/mlx5: Support different address spaces for control and data")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Message-Id: <20230802171231.11001-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ee811009a ]
The mr->initialized flag is shared between the control vq and data vq
part of the mr init/uninit. But if the control vq and data vq get placed
in different ASIDs, it can happen that initializing the control vq will
prevent the data vq mr from being initialized.
This patch consolidates the control and data vq init parts into their
own init functions. The mr->initialized will now be used for the data vq
only. The control vq currently doesn't need a flag.
The uninitializing part is also taken care of: mlx5_vdpa_destroy_mr got
split into data and control vq functions which are now also ASID aware.
Fixes: 8fcd20c307 ("vdpa/mlx5: Support different address spaces for control and data")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Message-Id: <20230802171231.11001-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55c91fedd0 ]
vm_dev has a separate lifecycle because it has a 'struct device'
embedded. Thus, having a release callback for it is correct.
Allocating the vm_dev struct with devres totally breaks this protection,
though. Instead of waiting for the vm_dev release callback, the memory
is freed when the platform_device is removed. Resulting in a
use-after-free when finally the callback is to be called.
To easily see the problem, compile the kernel with
CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs.
The fix is easy, don't use devres in this case.
Found during my research about object lifetime problems.
Fixes: 7eb781b1bb ("virtio_mmio: add cleanup for virtio_mmio_probe")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-Id: <20230629120526.7184-1-wsa+renesas@sang-engineering.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0657b20c5a ]
If a task creates a new block group and that block group becomes unused
before we finish its creation, at btrfs_create_pending_block_groups(),
then when btrfs_mark_bg_unused() is called against the block group, we
assume that the block group is currently in the list of block groups to
reclaim, and we move it out of the list of new block groups and into the
list of unused block groups. This has two consequences:
1) We move it out of the list of new block groups associated to the
current transaction. So the block group creation is not finished and
if we attempt to delete the bg because it's unused, we will not find
the block group item in the extent tree (or the new block group tree),
its device extent items in the device tree etc, resulting in the
deletion to fail due to the missing items;
2) We don't increment the reference count on the block group when we
move it to the list of unused block groups, because we assumed the
block group was on the list of block groups to reclaim, and in that
case it already has the correct reference count. However the block
group was on the list of new block groups, in which case no extra
reference was taken because it's local to the current task. This
later results in doing an extra reference count decrement when
removing the block group from the unused list, eventually leading the
reference count to 0.
This second case was caught when running generic/297 from fstests, which
produced the following assertion failure and stack trace:
[589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299
[589.559] ------------[ cut here ]------------
[589.559] kernel BUG at fs/btrfs/block-group.c:4299!
[589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.561] Code: 68 62 da c0 (...)
[589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246
[589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000
[589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff
[589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50
[589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00
[589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100
[589.563] FS: 00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000
[589.563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0
[589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[589.564] Call Trace:
[589.564] <TASK>
[589.565] ? __die_body+0x1b/0x60
[589.565] ? die+0x39/0x60
[589.565] ? do_trap+0xeb/0x110
[589.565] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.566] ? do_error_trap+0x6a/0x90
[589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.566] ? exc_invalid_op+0x4e/0x70
[589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.567] ? asm_exc_invalid_op+0x16/0x20
[589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.567] close_ctree+0x35d/0x560 [btrfs]
[589.568] ? fsnotify_sb_delete+0x13e/0x1d0
[589.568] ? dispose_list+0x3a/0x50
[589.568] ? evict_inodes+0x151/0x1a0
[589.568] generic_shutdown_super+0x73/0x1a0
[589.569] kill_anon_super+0x14/0x30
[589.569] btrfs_kill_super+0x12/0x20 [btrfs]
[589.569] deactivate_locked_super+0x2e/0x70
[589.569] cleanup_mnt+0x104/0x160
[589.570] task_work_run+0x56/0x90
[589.570] exit_to_user_mode_prepare+0x160/0x170
[589.570] syscall_exit_to_user_mode+0x22/0x50
[589.570] ? __x64_sys_umount+0x12/0x20
[589.571] do_syscall_64+0x48/0x90
[589.571] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[589.571] RIP: 0033:0x7f497ff0a567
[589.571] Code: af 98 0e (...)
[589.572] RSP: 002b:00007ffc98347358 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[589.572] RAX: 0000000000000000 RBX: 00007f49800b8264 RCX: 00007f497ff0a567
[589.572] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000557f558abfa0
[589.573] RBP: 0000557f558a6ba0 R08: 0000000000000000 R09: 00007ffc98346100
[589.573] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[589.573] R13: 0000557f558abfa0 R14: 0000557f558a6cb0 R15: 0000557f558a6dd0
[589.573] </TASK>
[589.574] Modules linked in: dm_snapshot dm_thin_pool (...)
[589.576] ---[ end trace 0000000000000000 ]---
Fix this by adding a runtime flag to the block group to tell that the
block group is still in the list of new block groups, and therefore it
should not be moved to the list of unused block groups, at
btrfs_mark_bg_unused(), until the flag is cleared, when we finish the
creation of the block group at btrfs_create_pending_block_groups().
Fixes: a9f189716c ("btrfs: move out now unused BG from the reclaim list")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 961f5b8bf4 ]
In zoned mode the sequential status of zone can be also tracked in the
runtime flags of block group.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 0657b20c5a ("btrfs: fix use-after-free of new block group that became unused")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d7764ff58 ]
We already have flags in block group to track various status bits,
convert needs_free_space as well and reduce size of btrfs_block_group.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 0657b20c5a ("btrfs: fix use-after-free of new block group that became unused")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9f189716c ]
An unused block group is easy to remove to free up space and should be
reclaimed fast. Such block group can often already be a target of the
reclaim process. As we check list_empty(&bg->bg_list), we keep it in the
reclaim list. That block group is never reclaimed until the file system
is filled e.g. up to 75%.
Instead, we can move unused block group to the unused list and delete it
fast.
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ae3716cfd ]
Instead of calling aperture_remove_conflicting_devices() to remove the
conflicting devices, just call to aperture_detach_devices() to detach
the device that matches the same PCI BAR / aperture range. Since the
former is just a wrapper of the latter plus a sysfb_disable() call,
and now that's done in this function but only for the primary devices.
This fixes a regression introduced by commit ee7a69aa38 ("fbdev:
Disable sysfb device registration when removing conflicting FBs"),
where we remove the sysfb when loading a driver for an unrelated pci
device, resulting in the user losing their efifb console or similar.
Note that in practice this only is a problem with the nvidia blob,
because that's the only gpu driver people might install which does not
come with an fbdev driver of it's own. For everyone else the real gpu
driver will restore a working console.
Also note that in the referenced bug there's confusion that this same
bug also happens on amdgpu. But that was just another amdgpu specific
regression, which just happened to happen at roughly the same time and
with the same user-observable symptoms. That bug is fixed now, see
https://bugzilla.kernel.org/show_bug.cgi?id=216331#c15
Note that we should not have any such issues on non-pci multi-gpu
issues, because I could only find two such cases:
- SoC with some external panel over spi or similar. These panel
drivers do not use drm_aperture_remove_conflicting_framebuffers(),
so no problem.
- vga+mga, which is a direct console driver and entirely bypasses all
this.
For the above reasons the cc: stable is just notionally, this patch
will need a backport and that's up to nvidia if they care enough.
v2:
- Explain a bit better why other multi-gpu that aren't pci shouldn't
have any issues with making all this fully pci specific.
v3
- polish commit message (Javier)
v4:
- Fix commit message style (i.e., commit 1234 ("..."))
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Fixes: ee7a69aa38 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Tested-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216303#c28
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Aaron Plattner <aplattner@nvidia.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # v5.19+ (if someone else does the backport)
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-8-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b321c31c9b ]
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when
running a preemptible kernel, as it is possible that a vCPU is blocked
without requesting a doorbell interrupt.
The issue is that any preemption that occurs between vgic_v4_put() and
schedule() on the block path will mark the vPE as nonresident and *not*
request a doorbell irq. This occurs because when the vcpu thread is
resumed on its way to block, vcpu_load() will make the vPE resident
again. Once the vcpu actually blocks, we don't request a doorbell
anymore, and the vcpu won't be woken up on interrupt delivery.
Fix it by tracking that we're entering WFI, and key the doorbell
request on that flag. This allows us not to make the vPE resident
when going through a preempt/schedule cycle, meaning we don't lose
any state.
Cc: stable@vger.kernel.org
Fixes: 8e01d9a396 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Suggested-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdff36a021 ]
[Why] hdcp are enabled for asics from raven. for old asics
which hdcp are not enabled, hdcp_workqueue are null. some
access to hdcp work queue are not guarded with pointer check.
[How] add hdcp_workqueue pointer check before access workqueue.
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8fd3eeb5e ]
[Why]
multiple display hdcp are enabled within event_property_validate,
event_property_update by looping all displays on mst hub. when
one of display on mst hub in unplugged or disabled, hdcp are
disabled for all displays on mst hub within hdcp_reset_display
by looping all displays of mst link. for displays still active,
their encryption status are off. kernel driver will not run hdcp
authentication again. therefore, hdcp are not enabled automatically.
[How]
within is_content_protection_different, check drm_crtc_state changes
of all displays on mst hub, if need, triger hdcp_update_display to
re-run hdcp authentication.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cdff36a021 ("drm/amd/display: fix access hdcp_workqueue assert")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82986fd631 ]
[Why]
connector hdcp properties are lost after display is
unplgged from mst hub. connector is destroyed with
dm_dp_mst_connector_destroy. when display is plugged
back, hdcp is not desired and it wouldnt be enabled.
[How]
save hdcp properties into hdcp_work within
amdgpu_dm_atomic_commit_tail. If the same display is
plugged back with same display index, its hdcp
properties will be retrieved from hdcp_work within
dm_dp_mst_get_modes.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cdff36a021 ("drm/amd/display: fix access hdcp_workqueue assert")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ce29c17dc ]
igc_configure_rx_ring() function will be called as part of XDP program
setup. If Rx hardware timestamp is enabled prio to XDP program setup,
this timestamp enablement will be overwritten when buffer size is
written into SRRCTL register.
Thus, this commit read the register value before write to SRRCTL
register. This commit is tested by using xdp_hw_metadata bpf selftest
tool. The tool enables Rx hardware timestamp and then attach XDP program
to igc driver. It will display hardware timestamp of UDP packet with
port number 9092. Below are detail of test steps and results.
Command on DUT:
sudo ./xdp_hw_metadata <interface name>
Command on Link Partner:
echo -n skb | nc -u -q1 <destination IPv4 addr> 9092
Result before this patch:
skb hwtstamp is not found!
Result after this patch:
found skb hwtstamp = 1677800973.642836757
Optionally, read PHC to confirm the values obtained are almost the same:
Command:
sudo ./testptp -d /dev/ptp0 -g
Result:
clock time: 1677800973.913598978 or Fri Mar 3 07:49:33 2023
Fixes: fc9df2a0b5 ("igc: Enable RX via AF_XDP zero-copy")
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1f0a9816f ]
In function ‘fortify_memcpy_chk’,
inlined from ‘get_conn_info_complete’ at net/bluetooth/mgmt.c:7281:2:
include/linux/fortify-string.h:592:25: error: call to
‘__read_overflow2_field’ declared with attribute warning: detected read
beyond size of field (2nd parameter); maybe use struct_group()?
[-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This is due to the wrong member is used for memcpy(). Use correct one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5251605f4d ]
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GZ301V series which uses an SPI connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230706223323.30871-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9abc77fb14 ]
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GA402X series which uses an I2C connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cc87c055d ]
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GV601V series which uses an I2C connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f4a08fed4 ]
The variable codec->regmap is often protected by the lock
codec->regmap_lock when is accessed. However, it is accessed without
holding the lock when is accessed in snd_hdac_regmap_sync():
if (codec->regmap)
In my opinion, this may be a harmful race, because if codec->regmap is
set to NULL right after the condition is checked, a null-pointer
dereference can occur in the called function regcache_sync():
map->lock(map->lock_arg); --> Line 360 in drivers/base/regmap/regcache.c
To fix this possible null-pointer dereference caused by data race, the
mutex_lock coverage is extended to protect the if statement as well as the
function call to regcache_sync().
[ Note: the lack of the regmap_lock itself is harmless for the current
codec driver implementations, as snd_hdac_regmap_sync() is only for
PM runtime resume that is prohibited during the codec probe.
But the change makes the whole code more consistent, so it's merged
as is -- tiwai ]
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/20230703031016.1184711-1-islituo@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97498cd610 ]
In a previous commit 2681631c29 ("fs/ntfs3: Add null pointer check to
attr_load_runs_vcn"), ni can be NULL in attr_load_runs_vcn(), and thus it
should be checked before being used.
However, in the call stack of this commit, mft_ni in mi_read() is
aliased with ni in attr_load_runs_vcn(), and it is also used in
mi_read() at two places:
mi_read()
rw_lock = &mft_ni->file.run_lock -> No check
attr_load_runs_vcn(mft_ni, ...)
ni (namely mft_ni) is checked in the previous commit
attr_load_runs_vcn(..., &mft_ni->file.run) -> No check
Thus, to avoid possible null-pointer dereferences, the related checks
should be added.
These bugs are reported by a static analysis tool implemented by myself,
and they are found by extending a known bug fixed in the previous commit.
Thus, they could be theoretical bugs.
Signed-off-by: Jia-Ju Bai <baijiaju@buaa.edu.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b0da5c549 ]
When the msgs are corrupted we need to dump them and then it will
be easier to dig what has happened and where the issue is.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2bfa94408 ]
Intel Barlow Ridge discrete USB4 host router has the same limitation as
the previous generations so make sure the USB3 bandwidth limitation
quirk is applied to Barlow Ridge too.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f14a21066 ]
Intel Barlow Ridge is the first USB4 v2 controller from Intel. The
controller exposes standard USB4 PCI class ID in typical configurations,
however there is a way to configure it so that it uses a special class
ID to allow using s different driver than the Windows inbox one. For
this reason add the Barlow Ridge PCI ID to the Linux driver too so that
the driver can attach regardless of the class ID.
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
