commit 054aa8d439 upstream.
Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit cbcf01128d ("af_unix: fix garbage collect vs MSG_PEEK").
See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.
The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.
This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design. Getting that reference count out of order isn't a problem per
se.
But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.
In commit cbcf01128d ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.
That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: I876f1ab7997e9546b9e13f5f5b681755acd229d6
Provide a vendor hook to allow page_referenced to be skipped
during shrink_active_list to avoid heavy cpuloading caused by
it.
Bug: 220878851
Signed-off-by: Liujie Xie <xieliujie@oppo.com>
Change-Id: Ie0e369f8f8739fea59a95470af20ab0e976869d1
When page allocation in direct reclaim path fails, the system will make
one attempt to shrink per-cpu page lists and free pages from high alloc
reserves. Draining per-cpu pages into buddy allocator can be a very slow
operation because it's done using workqueues and the task in direct
reclaim waits for all of them to finish before proceeding. Currently this
time is not accounted as psi memory stall.
While testing mobile devices under extreme memory pressure, when
allocations are failing during direct reclaim, we notices that psi events
which would be expected in such conditions were not triggered. After
profiling these cases it was determined that the reason for missing psi
events was that a big chunk of time spent in direct reclaim is not
accounted as memory stall, therefore psi would not reach the levels at
which an event is generated. Further investigation revealed that the bulk
of that unaccounted time was spent inside drain_all_pages call.
A typical captured case when drain_all_pages path gets activated:
__alloc_pages_slowpath took 44.644.613ns
__perform_reclaim took 751.668ns (1.7%)
drain_all_pages took 43.887.167ns (98.3%)
PSI in this case records the time spent in __perform_reclaim but ignores
drain_all_pages, IOW it misses 98.3% of the time spent in
__alloc_pages_slowpath.
Annotate __alloc_pages_direct_reclaim in its entirety so that delays from
handling page allocation failure in the direct reclaim path are accounted
as memory stall.
Link: https://lkml.kernel.org/r/20220223194812.1299646-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: Tim Murray <timmurray@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
(cherry picked from commit d4f448732857375eb3dc422225a61e64f8257cb1
https://github.com/hnaz/linux-mm.git master)
Bug: 205182133
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Ia3a4138f8d5e8ce612bd5c371cfcc0f21e1ebc42
The reverts in commits 07630c8073 (Revert "ANDROID: incremental-fs:
fix mount_fs issue") and 5db3e72c57 (Revert "ANDROID: incremental-fs:
remove index and incomplete dir on umount") were applied out of order,
resulting in a spurious call to kfree() being left over. Remove it.
Bug: 218732047
Signed-off-by: Steve Muckle <smuckle@google.com>
Change-Id: I6ae8d8a9775981a88d28e462b64b259bca905ffb
trace_android_vh_binder_proc_transaction_entry:
We need change binder thread so that this work can be added in
proc->todo, if we found the binder thread, skip native logic.
trace_android_vh_binder_select_worklist_ilocked:
we need this because we can't change list point in ”trace_android_vh_binder_thread_read“,
otherwise, If a work has beed added in our own defined list before,
current may goto retry and loop again and again.
Bug: 219898723
Change-Id: Ifdb3429c9ddac521bc75c1d21740ee7cc4b8f143
Signed-off-by: Liujie Xie <xieliujie@oppo.com>
This reverts commit 6f915dd2af.
This is follow up cleanup after revert of:
"Revert "ANDROID: incremental-fs: fix mount_fs issue"
Bug: 220805927
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Change-Id: I2ff42145dd586ae6ae4c76c3136e1fad14c08952
This reverts commit 93717b608d.
Test: Can now install the same apk twice, and repeated installs are
stable
Bug: 217661925
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Change-Id: I86871c364c17a0d1107b3891a574b72edcf04ea2
(cherry picked from commit d107cd06f2)
Signed-off-by: Steve Muckle <smuckle@google.com>
This reverts commit cb7e10d31b.
The hook android_vh_binder_proc_transaction_finish is not used by any
vendor, so remove it to help with merge issues with future LTS releases.
If this is needed by any real user, it can easily be reverted to add it
back and then the symbol should be added to the abi list at the same
time to prevent it from being removed again later.
Bug: 203756332
Bug: 208910215
Cc: Liujie Xie <xieliujie@oppo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I19c6660c138dc88e554e62d309484d75ec24dc6c
if2fs_fill_super
-> f2fs_build_segment_manager
-> create_discard_cmd_control
-> f2fs_start_discard_thread
It invokes kthread_run to create a thread and run issue_discard_thread.
However, if f2fs_build_node_manager fails, the control flow goes to
free_nm and calls f2fs_destroy_node_manager. This function will free
sbi->nm_info. However, if issue_discard_thread accesses sbi->nm_info
after the deallocation, but before the f2fs_stop_discard_thread, it will
cause UAF(Use-after-free).
-> f2fs_destroy_segment_manager
-> destroy_discard_cmd_control
-> f2fs_stop_discard_thread
Fix this by stopping discard thread before f2fs_destroy_node_manager.
Note that, the commit d6d2b491a8 introduces the call of
f2fs_available_free_memory into issue_discard_thread.
Cc: stable@vger.kernel.org
Fixes: d6d2b491a8 ("f2fs: allow to change discard policy based on cached discard cmds")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
(cherry picked from commit 5429c9dbc9)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change-Id: If121b453455b11b2aded8ba8a3899faad431dbd3
With the existing logic where clear_ack is true (HW doesn.t support
auto clear for ICR), interrupt clear register reset is not handled
properly. Due to this only the first interrupts get processed properly
and further interrupts are blocked due to not resetting interrupt
clear register.
Example for issue case where Invert_ack is false and clear_ack is true:
Say Default ISR=0x00 & ICR=0x00 and ISR is triggered with 2
interrupts making ISR = 0x11.
Step 1: Say ISR is set 0x11 (store status_buff = ISR). ISR needs to
be cleared with the help of ICR once the Interrupt is processed.
Step 2: Write ICR = 0x11 (status_buff), this will clear the ISR to 0x00.
Step 3: Issue - In the existing code, ICR is written with ICR =
~(status_buff) i.e ICR = 0xEE -> This will block all the interrupts
from raising except for interrupts 0 and 4. So expectation here is to
reset ICR, which will unblock all the interrupts.
if (chip->clear_ack) {
if (chip->ack_invert && !ret)
........
else if (!ret)
ret = regmap_write(map, reg,
~data->status_buf[i]);
So writing 0 and 0xff (when ack_invert is true) should have no effect, other
than clearing the ACKs just set.
Bug: 216238044
Fixes: 3a6f0fb7b8 ("regmap: irq: Add support to clear ack registers")
Change-Id: I42a884f214b3eacd9d9828078ff1a34a5f21a82f
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220217085007.30218-1-quic_pkumpatl@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit d04ad245d6
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git for-5.17)
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Syzbot found a GPF in reweight_entity. This has been bisected to
commit 4ef0c5c6b5 ("kernel/sched: Fix sched_fork() access an invalid
sched_task_group")
There is a race between sched_post_fork() and setpriority(PRIO_PGRP)
within a thread group that causes a null-ptr-deref in
reweight_entity() in CFS. The scenario is that the main process spawns
number of new threads, which then call setpriority(PRIO_PGRP, 0, -20),
wait, and exit. For each of the new threads the copy_process() gets
invoked, which adds the new task_struct and calls sched_post_fork()
for it.
In the above scenario there is a possibility that
setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread
in the group that is just being created by copy_process(), and for
which the sched_post_fork() has not been executed yet. This will
trigger a null pointer dereference in reweight_entity(), as it will
try to access the run queue pointer, which hasn't been set.
Before the mentioned change the cfs_rq pointer for the task has been
set in sched_fork(), which is called much earlier in copy_process(),
before the new task is added to the thread_group. Now it is done in
the sched_post_fork(), which is called after that. To fix the issue
the remove the update_load param from the update_load param() function
and call reweight_task() only if the task flag doesn't have the
TASK_NEW flag set.
Change-Id: I5324ce174190919cec268c281fb92dfeee830b00
Fixes: 4ef0c5c6b5 ("kernel/sched: Fix sched_fork() access an invalid sched_task_group")
Reported-by: syzbot+af7a719bc92395ee41b3@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220203161846.1160750-1-tadeusz.struk@linaro.org
Bug: 219676849
(cherry picked from commit 13765de814)
[quic_ashayj: Resolved minor compilation failure, replaced __state to state ]
Signed-off-by: Ashay Jaiswal <quic_ashayj@quicinc.com>
Expedited RCU grace periods invoke sync_rcu_exp_select_node_cpus(), which
takes two passes over the leaf rcu_node structure's CPUs. The first
pass gathers up the current CPU and CPUs that are in dynticks idle mode.
The workqueue will report a quiescent state on their behalf later.
The second pass sends IPIs to the rest of the CPUs, but excludes the
current CPU, incorrectly assuming it has been included in the first
pass's list of CPUs.
Unfortunately the current CPU may have changed between the first and
second pass, due to the fact that the various rcu_node structures'
->lock fields have been dropped, thus momentarily enabling preemption.
This means that if the second pass's CPU was not on the first pass's
list, it will be ignored completely. There will be no IPI sent to
it, and there will be no reporting of quiescent states on its behalf.
Unfortunately, the expedited grace period will nevertheless be waiting
for that CPU to report a quiescent state, but with that CPU having no
reason to believe that such a report is needed.
The result will be an expedited grace period stall.
Fix this by no longer excluding the current CPU from consideration during
the second pass.
Bug: 216238044
Fixes: b9ad4d6ed1 ("rcu: Avoid self-IPI in sync_rcu_exp_select_node_cpus()")
Change-Id: I6b7bab7d72ddc41ca7cbb6bdc0dbe1ad5ecb4f44
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
(cherry picked from commit 81f6d49cce)
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
We need pointers to proc and t, the current hooks in binder_proc_transaction
are unable to use.
Bug: 208910215
Change-Id: I730964f965a015e5f5a3e237d9b3bd084b5bd0d0
Signed-off-by: Liujie Xie <xieliujie@oppo.com>
Stall the control endpoint in case provided index exceeds array size of
MAX_CONFIG_INTERFACES or when the retrieved function pointer is null.
Bug: 213172319
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 75e5b4849b)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I78f46b6f2140394a6bc6cff9f829c0742d7ad2fc
Cleanup incremental-fs left overs on umount, otherwise incr-fs will
complain as below:
BUG: Dentry {i=47a,n=.incomplete} still in use [unmount of incremental-fs]
This requires vfs_rmdir() of the special index and incomplete dirs.
Also free options.sysfs_name in incfs_mount_fs() instead of in
incfs_free_mount_info() to make it consistent with incfs_remount_fs().
Since set_anon_super() was used in incfs_mount_fs() the incfs_kill_sb()
should use kill_anon_super() instead of generic_shutdown_super()
otherwise it will leak the pseudo dev_t that set_anon_super() allocates.
Bug: 211066171
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Change-Id: I7ea54db63513fc130e1997cbf79121015ee12405
Currently, mte_set_mem_tag_range() and mte_zero_clear_page_tags() use
DC {GVA,GZVA} unconditionally. But, they should make sure that
DCZID_EL0.DZP, which indicates whether or not use of those instructions
is prohibited, is zero when using those instructions.
Use ST{G,ZG,Z2G} instead when DCZID_EL0.DZP == 1.
Fixes: 013bb59dbb ("arm64: mte: handle tags zeroing at page allocation time")
Fixes: 3d0cca0b02 ("kasan: speed up mte_set_mem_tag_range")
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20211206004736.1520989-3-reijiw@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit 685e2564da)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: I1e7615a060d86aa743426334ec79d69b4299c7e8
For previous version, it uses 'sg_table.nent's to traverse sg_table in pages
free flow.
However, 'sg_table.nents' is reassigned in 'dma_map_sg', it means the number of
created entries in the DMA adderess space.
So, use 'sg_table.nents' in pages free flow will case some pages can't be freed.
Here we should use sg_table.orig_nents to free pages memory, but use the
sgtable helper 'for each_sgtable_sg'(, instead of the previous rather common
helper 'for_each_sg' which maybe cause memory leak) is much better.
Fixes: d963ab0f15 ("dma-buf: system_heap: Allocate higher order pages if available")
Signed-off-by: Guangming <Guangming.Cao@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org> # 5.11.*
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211126074904.88388-1-guangming.cao@mediatek.com
(cherry picked from commit 679d94cd7d)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: I90e1b7e9ea5d1fbabc86a0c1eddbdd2d8887e086
As Vincent reports in:
https://lore.kernel.org/r/20211118163417.21617-1-vincent.whitchurch@axis.com
The put_user() in schedule_tail() can get stuck in a livelock, similar
to a problem recently fixed on riscv in commit:
285a76bb2c ("riscv: evaluate put_user() arg before enabling user access")
In __raw_put_user() we have a critical section between
uaccess_ttbr0_enable() and uaccess_ttbr0_disable() where we cannot
safely call into the scheduler without having taken an exception, as
schedule() and other scheduling functions will not save/restore the
TTBR0 state. If either of the `x` or `ptr` arguments to __raw_put_user()
contain a blocking call, we may call into the scheduler within the
critical section. This can result in two problems:
1) The access within the critical section will occur without the
required TTBR0 tables installed. This will fault, and where the
required tables permit access, the access will be retried without the
required tables, resulting in a livelock.
2) When TTBR0 SW PAN is in use, check_and_switch_context() does not
modify TTBR0, leaving a stale value installed. The mappings of the
blocked task will erroneously be accessible to regular accesses in
the context of the new task. Additionally, if the tables are
subsequently freed, local TLB maintenance required to reuse the ASID
may be lost, potentially resulting in TLB corruption (e.g. in the
presence of CnP).
The same issue exists for __raw_get_user() in the critical section
between uaccess_ttbr0_enable() and uaccess_ttbr0_disable().
A similar issue exists for __get_kernel_nofault() and
__put_kernel_nofault() for the critical section between
__uaccess_enable_tco_async() and __uaccess_disable_tco_async(), as the
TCO state is not context-switched by direct calls into the scheduler.
Here the TCO state may be lost from the context of the current task,
resulting in unexpected asynchronous tag check faults. It may also be
leaked to another task, suppressing expected tag check faults.
To fix all of these cases, we must ensure that we do not directly call
into the scheduler in their respective critical sections. This patch
reworks __raw_put_user(), __raw_get_user(), __get_kernel_nofault(), and
__put_kernel_nofault(), ensuring that parameters are evaluated outside
of the critical sections. To make this requirement clear, comments are
added describing the problem, and line spaces added to separate the
critical sections from other portions of the macros.
For __raw_get_user() and __raw_put_user() the `err` parameter is
conditionally assigned to, and we must currently evaluate this in the
critical section. This behaviour is relied upon by the signal code,
which uses chains of put_user_error() and get_user_error(), checking the
return value at the end. In all cases, the `err` parameter is a plain
int rather than a more complex expression with a blocking call, so this
is safe.
In future we should try to clean up the `err` usage to remove the
potential for this to be a problem.
Aside from the changes to time of evaluation, there should be no
functional change as a result of this patch.
Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20211118163417.21617-1-vincent.whitchurch@axis.com
Fixes: f253d827f3 ("arm64: uaccess: refactor __{get,put}_user")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20211122125820.55286-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
(cherry picked from commit 94902d849e)
[connoro: adjust __raw_{get,put}_user comments to reflect 5.10 code]
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: I1c7f95b34b3bc53179ddaa7cb1fb38cfd9cc2e77
The id argument of ARM64_FTR_REG_OVERRIDE() is used for two purposes:
one as the system register encoding (used for the sys_id field of
__ftr_reg_entry), and the other as the register name (stringified
and used for the name field of arm64_ftr_reg), which is debug
information. The id argument is supposed to be a macro that
indicates an encoding of the register (eg. SYS_ID_AA64PFR0_EL1, etc).
ARM64_FTR_REG(), which also has the same id argument,
uses ARM64_FTR_REG_OVERRIDE() and passes the id to the macro.
Since the id argument is completely macro-expanded before it is
substituted into a macro body of ARM64_FTR_REG_OVERRIDE(),
the stringified id in the body of ARM64_FTR_REG_OVERRIDE is not
a human-readable register name, but a string of numeric bitwise
operations.
Fix this so that human-readable register names are available as
debug information.
Fixes: 8f266a5d87 ("arm64: cpufeature: Add global feature override facility")
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211101045421.2215822-1-reijiw@google.com
Signed-off-by: Will Deacon <will@kernel.org>
(cherry picked from commit 9dc232a8ab)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: I53c28eabd5a7e5499cf62a17e4d4d826130c2562
While commit 097b9146c0 ("net: fix up truesize of cloned
skb in skb_prepare_for_shift()") fixed immediate issues found
when KFENCE was enabled/tested, there are still similar issues,
when tcp_trim_head() hits KFENCE while the master skb
is cloned.
This happens under heavy networking TX workloads,
when the TX completion might be delayed after incoming ACK.
This patch fixes the WARNING in sk_stream_kill_queues
when sk->sk_mem_queued/sk->sk_forward_alloc are not zero.
Fixes: d3fb45f370 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20211102004555.1359210-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(cherry picked from commit c4777efa75)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: I5e456705bd01396c05c79009aeba36e00829e037
In RHEL's gating selftests we've encountered memory corruption in the
uffd event test even with upstream kernel:
# ./userfaultfd anon 128 4
nr_pages: 32768, nr_pages_per_cpu: 32768
bounces: 3, mode: rnd racing read, userfaults: 6240 missing (6240) 14729 wp (14729)
bounces: 2, mode: racing read, userfaults: 1444 missing (1444) 28877 wp (28877)
bounces: 1, mode: rnd read, userfaults: 6055 missing (6055) 14699 wp (14699)
bounces: 0, mode: read, userfaults: 82 missing (82) 25196 wp (25196)
testing uffd-wp with pagemap (pgsize=4096): done
testing uffd-wp with pagemap (pgsize=2097152): done
testing events (fork, remap, remove): ERROR: nr 32427 memory corruption 0 1 (errno=0, line=963)
ERROR: faulting process failed (errno=0, line=1117)
It can be easily reproduced when global thp enabled, which is the
default for RHEL.
It's also known as a side effect of commit 0db282ba2c ("selftest: use
mmap instead of posix_memalign to allocate memory", 2021-07-23), which
is imho right itself on using mmap() to make sure the addresses will be
untagged even on arm.
The problem is, for each test we allocate buffers using two
allocate_area() calls. We assumed these two buffers won't affect each
other, however they could, because mmap() could have found that the two
buffers are near each other and having the same VMA flags, so they got
merged into one VMA.
It won't be a big problem if thp is not enabled, but when thp is
agressively enabled it means when initializing the src buffer it could
accidentally setup part of the dest buffer too when there's a shared THP
that overlaps the two regions. Then some of the dest buffer won't be
able to be trapped by userfaultfd missing mode, then it'll cause memory
corruption as described.
To fix it, do release_pages() after initializing the src buffer.
Since the previous two release_pages() calls are after
uffd_test_ctx_clear() which will unmap all the buffers anyway (which is
stronger than release pages; as unmap() also tear town pgtables), drop
them as they shouldn't really be anything useful.
We can mark the Fixes tag upon 0db282ba2c as it's reported to only
happen there, however the real "Fixes" IMHO should be 8ba6e86408, as
before that commit we'll always do explicit release_pages() before
registration of uffd, and 8ba6e86408 changed that logic by adding
extra unmap/map and we didn't release the pages at the right place.
Meanwhile I don't have a solid glue anyway on whether posix_memalign()
could always avoid triggering this bug, hence it's safer to attach this
fix to commit 8ba6e86408.
Link: https://lkml.kernel.org/r/20210923232512.210092-1-peterx@redhat.com
Fixes: 8ba6e86408 ("userfaultfd/selftests: reinitialize test context in each test")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1994931
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Li Wang <liwan@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 8913970c19)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: I5f5c06c9e3be4a6e521415edb785ddcc0be81b21
The KVM page-table library refcounts the pages of concatenated stage-2
PGDs individually. However, when running KVM in protected mode, the
host's stage-2 PGD is currently managed by EL2 as a single high-order
compound page, which can cause the refcount of the tail pages to reach 0
when they shouldn't, hence corrupting the page-table.
Fix this by introducing a new hyp_split_page() helper in the EL2 page
allocator (matching the kernel's split_page() function), and make use of
it from host_s2_zalloc_pages_exact().
Fixes: 1025c8c0c6 ("KVM: arm64: Wrap the host with a stage 2")
Acked-by: Will Deacon <will@kernel.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005090155.734578-5-qperret@google.com
(cherry picked from commit 1d58a17ef5)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: Idf0d8328710517aee822f77a2097295734c78e7a
tx-fifo-resize is now added by default by the dwc3-qcom driver
to the SNPS DWC3 child node.
So, lets drop the tx-fifo-resize property from dwc3-qcom nodes
as having it there will cause the dwc3-qcom driver to error and
abort probe with:
[ 1.362938] dwc3-qcom 8af8800.usb: unable to add property
[ 1.368405] dwc3-qcom 8af8800.usb: failed to register DWC3 Core, err=-17
Fixes: cefdd52fa0 ("usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20210902220325.1783567-1-robimarko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit da546d6b74)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: I0ffb00d40b43772af3c226141183ca47325e748f
This reverts commit cefdd52fa0.
On sc7180-trogdor class devices with 'fw_devlink=permissive' and KASAN
enabled, you'll see a Use-After-Free reported at bootup.
The root of the problem is that dwc3_qcom_of_register_core() is adding
a devm-allocated "tx-fifo-resize" property to its device tree node
using of_add_property().
The issue is that of_add_property() makes a _permanent_ addition to
the device tree that lasts until reboot. That means allocating memory
for the property using "devm" managed memory is a terrible idea since
that memory will be freed upon probe deferral or device unbinding.
Let's revert the patch since the system is still functional without
it. The fact that of_add_property() makes a permanent change is extra
fodder for those folks who were aruging that the device tree isn't
really the right way to pass information between parts of the
driver. It is an exercise left to the reader to submit a patch
re-adding the new feature in a way that makes everyone happier.
Fixes: cefdd52fa0 ("usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20211207094327.1.Ie3cde3443039342e2963262a4c3ac36dc2c08b30@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 6a97cee39d)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: I69a18d3518e8cc9c43e93225f7427642b42a931b
USB TCPCI Spec, 4.4.3 Mask Registers:
"A masked register will still indicate in the ALERT register, but shall
not set the Alert# pin low."
Thus, the Extended Status will still indicate in ALERT register if vSafe0V
is detected by TCPC even though being masked. In current code, howerer,
this event will not be handled in detection time. Rather it will be
handled when next ALERT event coming(CC evnet, PD event, etc).
Tcpm might transition to a wrong state in this situation. Thus, the vSafe0V
event should not be handled when it's masked.
Fixes: 766c485b86 ("usb: typec: tcpci: Add support to report vSafe0V")
cc: <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20210926101415.3775058-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 05300871c0)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: Iad4f5330bf080f5f00b8599064c23e6d59e0ad51
When we have a dependency of the form:
Device-A -> Device-C
Device-B
Device-C -> Device-B
Where,
* Indentation denotes "child of" parent in previous line.
* X -> Y denotes X is consumer of Y based on firmware (Eg: DT).
We have cyclic dependency: device-A -> device-C -> device-B -> device-A
fw_devlink current treats device-C -> device-B dependency as an invalid
dependency and doesn't enforce it but leaves the rest of the
dependencies as is.
While the current behavior is necessary, it is not sufficient if the
false dependency in this example is actually device-A -> device-C. When
this is the case, device-C will correctly probe defer waiting for
device-B to be added, but device-A will be incorrectly probe deferred by
fw_devlink waiting on device-C to probe successfully. Due to this, none
of the devices in the cycle will end up probing.
To fix this, we need to go relax all the dependencies in the cycle like
we already do in the other instances where fw_devlink detects cycles.
A real world example of this was reported[1] and analyzed[2].
[1] - https://lore.kernel.org/lkml/0a2c4106-7f48-2bb5-048e-8c001a7c3fda@samsung.com/
[2] - https://lore.kernel.org/lkml/CAGETcx8peaew90SWiux=TyvuGgvTQOmO4BFALz7aj0Za5QdNFQ@mail.gmail.com/
Fixes: f9aa460672 ("driver core: Refactor fw_devlink feature")
Cc: stable <stable@vger.kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210915170940.617415-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 2de9d8e0d2)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: Ib8453b5aa3320bb0da9f775702e65021623ca4d8
Since the commit e5efaeb8a8 ("bootconfig: Support mixing
a value and subkeys under a key") allows to co-exist a value
node and key nodes under a node, xbc_node_for_each_child()
is not only returning key node but also a value node.
In the boot-time tracing using xbc_node_for_each_child() to
iterate the events, groups and instances, but those must be
key nodes. Thus it must use xbc_node_for_each_subkey().
Link: https://lkml.kernel.org/r/163112988361.74896.2267026262061819145.stgit@devnote2
Fixes: e5efaeb8a8 ("bootconfig: Support mixing a value and subkeys under a key")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
(cherry picked from commit cfd799837d)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: I9c6a525f2a6a09f95298d3cf8b31495d13fec91f
Some UDCs may return an error during pullup disable as part of the
unbind path for a USB configuration. This will lead to a scenario
where the disable() callback is skipped, whereas the unbind() still
occurs. If this happens, the u_serial driver will continue to fail
subsequent binds, due to an already existing entry in the ports array.
Ensure that gserial_disconnect() is called during the f_serial unbind,
so the ports entry is properly cleared.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220111064850.24311-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bug: 215650635
(cherry picked from commit d6dd18efd0)
Change-Id: I6d345345f5a86d73def1634d9860c598542e42a1
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
The following deadlock has been observed on a test setup:
- All tags allocated
- The SCSI error handler calls ufshcd_eh_host_reset_handler()
- ufshcd_eh_host_reset_handler() queues work that calls
ufshcd_err_handler()
- ufshcd_err_handler() locks up as follows:
Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt
Call trace:
__switch_to+0x298/0x5d8
__schedule+0x6cc/0xa94
schedule+0x12c/0x298
blk_mq_get_tag+0x210/0x480
__blk_mq_alloc_request+0x1c8/0x284
blk_get_request+0x74/0x134
ufshcd_exec_dev_cmd+0x68/0x640
ufshcd_verify_dev_init+0x68/0x35c
ufshcd_probe_hba+0x12c/0x1cb8
ufshcd_host_reset_and_restore+0x88/0x254
ufshcd_reset_and_restore+0xd0/0x354
ufshcd_err_handler+0x408/0xc58
process_one_work+0x24c/0x66c
worker_thread+0x3e8/0xa4c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved
request.
Link: https://lore.kernel.org/r/20211203231950.193369-10-bvanassche@acm.org
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
(cherry picked from commit 945c3cca05 git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git for-next)
Bug: 204438323
Bug: 218587336
Change-Id: Ib8027a51cc4b7bec7ddd69719f0f7f4a6e8dfb3a
Signed-off-by: Bart Van Assche <bvanassche@google.com>
8250_core registers 4 ISA uart ports by default, which can cause
problems on some devices which don't have them. This change doesn't
break earlycon=uart8250, but it will cause the 8250_of and 8250_pci sub
drivers to be unable to register ports. Boards that really need the full
8250 driver to take over from earlycon can use the "8250.nr_uarts=X"
kernel command line option to restore the ports allocation.
Bug: 216312411
Signed-off-by: Alistair Delva <adelva@google.com>
Change-Id: I04715394b32bd98544657101de4537df34554ea9
[Lee: Fixed merge conflict]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
