commit 92c5d1b860 upstream.
The current sanity check for nilfs2 geometry information lacks checks for
the number of segments stored in superblocks, so even for device images
that have been destructively truncated or have an unusually high number of
segments, the mount operation may succeed.
This causes out-of-bounds block I/O on file system block reads or log
writes to the segments, the latter in particular causing
"a_ops->writepages" to repeatedly fail, resulting in sync_inodes_sb() to
hang.
Fix this issue by checking the number of segments stored in the superblock
and avoiding mounting devices that can cause out-of-bounds accesses. To
eliminate the possibility of overflow when calculating the number of
blocks required for the device from the number of segments, this also adds
a helper function to calculate the upper bound on the number of segments
and inserts a check using it.
Link: https://lkml.kernel.org/r/20230526021332.3431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+7d50f1e54a12ba3aeae2@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=7d50f1e54a12ba3aeae2
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fee5eaecca upstream.
Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().
It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.
This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge. However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.
The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.
Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.
Link: https://lkml.kernel.org/r/20230524094348.3784-1-konishi.ryusuke@gmail.com
Fixes: 4e33f9eab0 ("nilfs2: implement resize ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+33494cd0df2ec2931851@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000005434c405fbbafdc5@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85041e1241 upstream.
The given value of 1518 seems to refer to the layer 2 ethernet frame
size without 802.1Q tag. Actual use of the "max-frame-size" including in
the consumer of the "altr,tse-1.0" compatible is the MTU.
Fixes: 95acd4c7b6 ("nios2: Device tree support")
Fixes: 61c610ec61 ("nios2: Add Max10 device tree")
Cc: <stable@vger.kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bdf0efa18 upstream.
Before storing a page, zswap first checks if the number of stored pages
exceeds the limit specified by memory.zswap.max, for each cgroup in the
hierarchy. If this limit is reached or exceeded, then zswap shrinking is
triggered and short-circuits the store attempt.
However, since the zswap's LRU is not memcg-aware, this can create the
following pathological behavior: the cgroup whose zswap limit is 0 will
evict pages from other cgroups continually, without lowering its own zswap
usage. This means the shrinking will continue until the need for swap
ceases or the pool becomes empty.
As a result of this, we observe a disproportionate amount of zswap
writeback and a perpetually small zswap pool in our experiments, even
though the pool limit is never hit.
More generally, a cgroup might unnecessarily evict pages from other
cgroups before we drive the memcg back below its limit.
This patch fixes the issue by rejecting zswap store attempt without
shrinking the pool when obj_cgroup_may_zswap() returns false.
[akpm@linux-foundation.org: fix return of unintialized value]
[akpm@linux-foundation.org: s/ENOSPC/ENOMEM/]
Link: https://lkml.kernel.org/r/20230530222440.2777700-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230530232435.3097106-1-nphamcs@gmail.com
Fixes: f4840ccfca ("zswap: memcg accounting")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50d927880e upstream.
It's trivial to trigger a use-after-free bug in the ocfs2 quotas code using
fstest generic/452. After a read-only remount, quotas are suspended and
ocfs2_mem_dqinfo is freed through ->ocfs2_local_free_info(). When unmounting
the filesystem, an UAF access to the oinfo will eventually cause a crash.
BUG: KASAN: slab-use-after-free in timer_delete+0x54/0xc0
Read of size 8 at addr ffff8880389a8208 by task umount/669
...
Call Trace:
<TASK>
...
timer_delete+0x54/0xc0
try_to_grab_pending+0x31/0x230
__cancel_work_timer+0x6c/0x270
ocfs2_disable_quotas.isra.0+0x3e/0xf0 [ocfs2]
ocfs2_dismount_volume+0xdd/0x450 [ocfs2]
generic_shutdown_super+0xaa/0x280
kill_block_super+0x46/0x70
deactivate_locked_super+0x4d/0xb0
cleanup_mnt+0x135/0x1f0
...
</TASK>
Allocated by task 632:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x8b/0x90
ocfs2_local_read_info+0xe3/0x9a0 [ocfs2]
dquot_load_quota_sb+0x34b/0x680
dquot_load_quota_inode+0xfe/0x1a0
ocfs2_enable_quotas+0x190/0x2f0 [ocfs2]
ocfs2_fill_super+0x14ef/0x2120 [ocfs2]
mount_bdev+0x1be/0x200
legacy_get_tree+0x6c/0xb0
vfs_get_tree+0x3e/0x110
path_mount+0xa90/0xe10
__x64_sys_mount+0x16f/0x1a0
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 650:
kasan_save_stack+0x1c/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0xf9/0x150
__kmem_cache_free+0x89/0x180
ocfs2_local_free_info+0x2ba/0x3f0 [ocfs2]
dquot_disable+0x35f/0xa70
ocfs2_susp_quotas.isra.0+0x159/0x1a0 [ocfs2]
ocfs2_remount+0x150/0x580 [ocfs2]
reconfigure_super+0x1a5/0x3a0
path_mount+0xc8a/0xe10
__x64_sys_mount+0x16f/0x1a0
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Link: https://lkml.kernel.org/r/20230522102112.9031-1-lhenriques@suse.de
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7e60032c6 upstream.
This should use wiphy_lock() now instead of requiring the
RTNL, since __cfg80211_leave() via cfg80211_leave() is now
requiring that lock to be held.
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 91539341a3 ]
When checking for OF quirks, make sure either 'compatible' or 'property'
is set, and give up otherwise.
This avoids non-OF quirks being randomly applied as they don't have any
of the OF data that need checking.
Cc: Douglas Anderson <dianders@chromium.org>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 44bd78dd2b ("irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 533ab73f5b ]
The sq thread actively releases CPU resources by calling the
cond_resched() and schedule() interfaces when it is idle. Therefore,
more resources are available for other threads to run.
There exists a problem in sq thread: it does not unlock sqd->lock before
releasing CPU resources every time. This makes other threads pending on
sqd->lock for a long time. For example, the following interfaces all
require sqd->lock: io_sq_offload_create(), io_register_iowq_max_workers()
and io_ring_exit_work().
Before the sq thread releases CPU resources, unlocking sqd->lock will
provide the user a better experience because it can respond quickly to
user requests.
Signed-off-by: Kanchan Joshi<joshi.k@samsung.com>
Signed-off-by: Wenwen Chen<wenwen.chen@samsung.com>
Link: https://lore.kernel.org/r/20230525082626.577862-1-wenwen.chen@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6ebaa8100 ]
The existing code silently converts read operations with the
REQ_FUA bit set into write-barrier operations. This results in data
loss as the backend scribbles zeroes over the data instead of returning
it.
While the REQ_FUA bit doesn't make sense on a read operation, at least
one well-known out-of-tree kernel module does set it and since it
results in data loss, let's be safe here and only look at REQ_FUA for
writes.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230426164005.2213139-1-ross.lagerwall@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4897a898a2 ]
PAGE_OFFSET is technically a virtual address so when checking the value of
initrd_start against it we should make sure that it has been sanitised from
the values passed by the bootloader. Without this change, even with a bootloader
that passes correct addresses for an initrd, we are failing to load it on MT7621
boards, for example.
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d645604f6 ]
Various fixes for the Au1200/Au1550/Au1300 DBDMA2 code:
- skip cache invalidation if chip has working coherency circuitry.
- invalidate KSEG0-portion of the (physical) data address.
- force the dma channel doorbell write out to bus immediately with
a sync.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2041708de ]
The Au1300, at least the one I have to test, uses the NetLogic vendor
ID, but commit 95b8a5e011 ("MIPS: Remove NETLOGIC support") also
dropped Au1300 detection. Restore Au1300 detection.
Tested on DB1300 with Au1380 chip.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75b18aac6f ]
Alchemy DB1200/DB1300 boards can use the pata_platform driver.
Unhide the config entry in all of MIPS.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59fa12646d ]
Add comment in arch_sync_dma_for_device() and handle the direction flag in
arch_sync_dma_for_cpu().
When receiving data from the device (DMA_FROM_DEVICE) unconditionally
purge the data cache in arch_sync_dma_for_cpu().
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e123036be3 ]
In the BE hw_params configuration, the existing code checks if any of the
existing FEs are prepared, running, paused or suspended - and skips the
configuration in those cases. This allows multiple calls of hw_params
which the ALSA state machine supports.
This check is not handled for the prepare stage, which can lead to the
same BE being prepared multiple times. This patch adds a check similar to
that of the hw_params, with the main difference being that the suspended
state is allowed: the ALSA state machine allows a transition from
suspended to prepared with hw_params skipped.
This problem was detected on Intel IPC4/SoundWire devices, where the BE
dailink .prepare stage is used to configure the SoundWire stream with a
bank switch. Multiple .prepare calls lead to conflicts with the .trigger
operation with IPC4 configurations. This problem was not detected earlier
on Intel devices, HDaudio BE dailinks detect that the link is already
prepared and skip the configuration, and for IPC3 devices there is no BE
trigger.
Link: https://github.com/thesofproject/sof/issues/7596
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230517185731.487124-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 806570c0bb ]
Since f8a53bb58e ("btrfs: handle checksum generation in the storage
layer") the failures of btrfs_csum_one_bio() are handled via
bio_end_io().
This means, we can return BLK_STS_RESOURCE from btrfs_csum_one_bio() in
case the allocation of the ordered sums fails.
This also fixes a syzkaller report, where injecting a failure into the
kvzalloc() call results in a BUG_ON().
Reported-by: syzbot+d8941552e21eac774778@syzkaller.appspotmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7561551e7b ]
Currently we allow a block group not to be marked read-only for scrub.
But for RAID56 block groups if we require the block group to be
read-only, then we're allowed to use cached content from scrub stripe to
reduce unnecessary RAID56 reads.
So this patch would:
- Make btrfs_inc_block_group_ro() try harder
During my tests, for cases like btrfs/061 and btrfs/064, we can hit
ENOSPC from btrfs_inc_block_group_ro() calls during scrub.
The reason is if we only have one single data chunk, and trying to
scrub it, we won't have any space left for any newer data writes.
But this check should be done by the caller, especially for scrub
cases we only temporarily mark the chunk read-only.
And newer data writes would always try to allocate a new data chunk
when needed.
- Return error for scrub if we failed to mark a RAID56 chunk read-only
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95339f40a8 ]
The logic used for power_supply_is_system_supplied() counts all power
supplies and assumes that the system is running from AC if there is
either a non-battery power-supply reporting to be online or if no
power-supplies exist at all.
The second rule is for desktop systems, that don't have any
battery/charger devices. These systems will incorrectly report to be
powered from battery once a device scope power-supply is registered
(e.g. a HID device), since these power-supplies increase the counter.
Apart from HID devices, recent dGPUs provide UCSI power supplies on a
desktop systems. The dGPU by default doesn't have anything plugged in so
it's 'offline'. This makes power_supply_is_system_supplied() return 0
with a count of 1 meaning all drivers that use this get a wrong judgement.
To fix this case adjust the logic to also examine the scope of the power
supply. If the power supply is deemed a device power supply, then don't
count it.
Cc: Evan Quan <Evan.Quan@amd.com>
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44bd78dd2b ]
Some Chromebooks with Mediatek SoCs have a problem where the firmware
doesn't properly save/restore certain GICR registers. Newer
Chromebooks should fix this issue and we may be able to do firmware
updates for old Chromebooks. At the moment, the only known issue with
these Chromebooks is that we can't enable "pseudo NMIs" since the
priority register can be lost. Enabling "pseudo NMIs" on Chromebooks
with the problematic firmware causes crashes and freezes.
Let's detect devices with this problem and then disable "pseudo NMIs"
on them. We'll detect the problem by looking for the presence of the
"mediatek,broken-save-restore-fw" property in the GIC device tree
node. Any devices with fixed firmware will not have this property.
Our detection plan works because we never bake a Chromebook's device
tree into firmware. Instead, device trees are always bundled with the
kernel. We'll update the device trees of all affected Chromebooks and
then we'll never enable "pseudo NMI" on a kernel that is bundled with
old device trees. When a firmware update is shipped that fixes this
issue it will know to patch the device tree to remove the property.
In order to make this work, the quick detection mechanism of the GICv3
code is extended to be able to look for properties in addition to
looking at "compatible".
Reviewed-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230515131353.v2.2.I88dc0a0eb1d9d537de61604cd8994ecc55c0cac1@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 362c1f2ec8 ]
On ASUS GU604V the key 0x7B is issued when the charger is connected or
disconnected, and key 0xC0 is issued when an external display is
connected or disconnected.
This commit maps them to KE_IGNORE to slience kernel messages about
unknown keys, such as:
kernel: asus_wmi: Unknown key code 0x7b
Signed-off-by: Alexandru Sorodoc <ealex95@gmail.com>
Link: https://lore.kernel.org/r/20230512101517.47416-1-ealex95@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 155c45a256 ]
Reduce the amount of output this dev_dbg() statement emits into logs,
otherwise if system software polls the sysfs entry for data and keeps
getting -ENODATA, it could end up filling the logs up.
This does in fact make systemd journald choke, since during boot the
sysfs power supply entries are polled and if journald starts at the
same time, the journal is just being repeatedly filled up, and the
system stops on trying to start journald without booting any further.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 976d3c6778 ]
According to Mirsad the gpio-sim.sh test appears to FAIL in a wrong way
due to missing initialisation of shell variables:
4.2. Bias settings work correctly
cat: /sys/devices/platform/gpio-sim.0/gpiochip18/sim_gpio0/value: No such file or directory
./gpio-sim.sh: line 393: test: =: unary operator expected
bias setting does not work
GPIO gpio-sim test FAIL
After this change the test passed:
4.2. Bias settings work correctly
GPIO gpio-sim test PASS
His testing environment is AlmaLinux 8.7 on Lenovo desktop box with
the latest Linux kernel based on v6.2:
Linux 6.2.0-mglru-kmlk-andy-09238-gd2980d8d8265 x86_64
Suggested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d5c129d6c ]
sc27xx_fgu_external_power_changed() dereferences data->battery,
which gets sets in ab8500_btemp_probe() like this:
data->battery = devm_power_supply_register(dev, &sc27xx_fgu_desc,
&fgu_cfg);
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where sc27xx_fgu_external_power_changed() may get called while
data->battery has not been set yet leading to a NULL pointer dereference.
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in data->battery,
so sc27xx_fgu_external_power_changed() can simply directly use
the passed in psy argument which is always valid.
After this change sc27xx_fgu_external_power_changed() is reduced to just
"power_supply_changed(psy);" and it has the same prototype. While at it
simply replace it with making the external_power_changed callback
directly point to power_supply_changed.
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5299ce4e9 ]
ab8500_btemp_external_power_changed() dereferences di->btemp_psy,
which gets sets in ab8500_btemp_probe() like this:
di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc,
&psy_cfg);
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where ab8500_btemp_external_power_changed() may get called while
di->btemp_psy has not been set yet leading to a NULL pointer dereference.
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in di->btemp_psy,
so ab8500_btemp_external_power_changed() can simply directly use
the passed in psy argument which is always valid.
And the same applies to ab8500_fg_external_power_changed().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c1bcf2d3e ]
This patch add the validation for smb request protocol id.
If it is not one of the four ids(SMB1_PROTO_NUMBER, SMB2_PROTO_NUMBER,
SMB2_TRANSFORM_PROTO_NUM, SMB2_COMPRESSION_TRANSFORM_ID), don't allow
processing the request. And this will fix the following KASAN warning
also.
[ 13.905265] BUG: KASAN: slab-out-of-bounds in init_smb2_rsp_hdr+0x1b9/0x1f0
[ 13.905900] Read of size 16 at addr ffff888005fd2f34 by task kworker/0:2/44
...
[ 13.908553] Call Trace:
[ 13.908793] <TASK>
[ 13.908995] dump_stack_lvl+0x33/0x50
[ 13.909369] print_report+0xcc/0x620
[ 13.910870] kasan_report+0xae/0xe0
[ 13.911519] kasan_check_range+0x35/0x1b0
[ 13.911796] init_smb2_rsp_hdr+0x1b9/0x1f0
[ 13.912492] handle_ksmbd_work+0xe5/0x820
Cc: stable@vger.kernel.org
Reported-by: Chih-Yen Chang <cc85nod@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee13b50087 ]
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for
accessing the (Control and Status Registers) CSRs of each LLCC bank.
This stride only works for some SoCs like SDM845 for which driver
support was initially added.
But the later SoCs use different register stride that vary between the
banks with holes in-between. So it is not possible to use a single register
stride for accessing the CSRs of each bank. By doing so could result in a
crash.
For fixing this issue, let's obtain the base address of each LLCC bank from
devicetree and get rid of the fixed stride. This also means, there is no
need to rely on reg-names property and the base addresses can be obtained
using the index.
First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC
supports more than one bank, then those need to be defined in devicetree
for index from 1..N-1.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-13-manivannan.sadhasivam@linaro.org
Stable-dep-of: cbd77119b6 ("EDAC/qcom: Get rid of hardcoded register offsets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab1de7ead8 ]
The commit 4f7e723643 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock()
deadlock") fixed the deadlock between cgroup_threadgroup_rwsem and
cpus_read_lock() by introducing cgroup_attach_{lock,unlock}() and removing
cpus_read_{lock,unlock}() from cpuset_attach(). But cgroup_transfer_tasks()
was missed and not handled, which will cause th following warning:
WARNING: CPU: 0 PID: 589 at kernel/cpu.c:526 lockdep_assert_cpus_held+0x32/0x40
CPU: 0 PID: 589 Comm: kworker/1:4 Not tainted 6.4.0-rc2-next-20230517 #50
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Workqueue: events cpuset_hotplug_workfn
RIP: 0010:lockdep_assert_cpus_held+0x32/0x40
<...>
Call Trace:
<TASK>
cpuset_attach+0x40/0x240
cgroup_migrate_execute+0x452/0x5e0
? _raw_spin_unlock_irq+0x28/0x40
cgroup_transfer_tasks+0x1f3/0x360
? find_held_lock+0x32/0x90
? cpuset_hotplug_workfn+0xc81/0xed0
cpuset_hotplug_workfn+0xcb1/0xed0
? process_one_work+0x248/0x5b0
process_one_work+0x2b9/0x5b0
worker_thread+0x56/0x3b0
? process_one_work+0x5b0/0x5b0
kthread+0xf1/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
So just use the cgroup_attach_{lock,unlock}() helper to fix it.
Reported-by: Zhao Gongyi <zhaogongyi@bytedance.com>
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Fixes: 05c7b7a92c ("cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug")
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bd1103392 ]
A successful call to cgroup_css_set_fork() will always have taken
a ref on kargs->cset (regardless of CLONE_INTO_CGROUP), so always
do a corresponding put in cgroup_css_set_put_fork().
Without this, a cset and its contained css structures will be
leaked for some fork failures. The following script reproduces
the leak for a fork failure due to exceeding pids.max in the
pids controller. A similar thing can happen if we jump to the
bad_fork_cancel_cgroup label in copy_process().
[ -z "$1" ] && echo "Usage $0 pids-root" && exit 1
PID_ROOT=$1
CGROUP=$PID_ROOT/foo
[ -e $CGROUP ] && rmdir -f $CGROUP
mkdir $CGROUP
echo 5 > $CGROUP/pids.max
echo $$ > $CGROUP/cgroup.procs
fork_bomb()
{
set -e
for i in $(seq 10); do
/bin/sleep 3600 &
done
}
(fork_bomb) &
wait
echo $$ > $PID_ROOT/cgroup.procs
kill $(cat $CGROUP/cgroup.procs)
rmdir $CGROUP
Fixes: ef2c41cf38 ("clone3: allow spawning processes into cgroups")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cdb91b0de ]
Replace mutex_[un]lock() with cgroup_[un]lock() wrappers to stay
consistent across cgroup core and other subsystem code, while
operating on the cgroup_mutex.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Stable-dep-of: 2bd1103392 ("cgroup: always put cset in cgroup_css_set_put_fork")
Signed-off-by: Sasha Levin <sashal@kernel.org>
