[ Upstream commit 7ffa8b7dc1 ]
Aneesh increased the size of struct pt_regs by 16 bytes and started
seeing this WARN_ON:
smp: Bringing up secondary CPUs ...
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318
NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000
REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000
CFAR: c000000000019cc8 IRQMASK: 1
GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033
GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164
GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030
GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066
GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890
GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080
GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90
GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200
NIP [c00000000001a2b4] giveup_all+0xb4/0x110
LR [c00000000001a29c] giveup_all+0x9c/0x110
Call Trace:
[c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable)
[c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480
[c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970
[c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70
[c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0
[c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40
[c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8
[c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0
[c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400
Which was unexpected. The warning is checking the thread.regs->msr
value of the task we are switching from:
usermsr = tsk->thread.regs->msr;
...
WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC)));
ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set.
Dumping tsk->thread.regs->msr we see that it's: 0x1db60000
Which is not a normal looking MSR, in fact the only valid bit is
MSR_VSX, all the other bits are reserved in the current definition of
the MSR.
We can see from the oops that it was swapper/0 that we were switching
from when we hit the warning, ie. init_task. So its thread.regs points
to the base (high addresses) in init_stack.
Dumping the content of init_task->thread.regs, with the members of
pt_regs annotated (the 16 bytes larger version), we see:
0000000000000000 c000000002780080 gpr[0] gpr[1]
0000000000000000 c000000002666008 gpr[2] gpr[3]
c0000000026d3ed0 0000000000000078 gpr[4] gpr[5]
c000000000011b68 c000000002780080 gpr[6] gpr[7]
0000000000000000 0000000000000000 gpr[8] gpr[9]
c0000000026d3f90 0000800000002200 gpr[10] gpr[11]
c000000002004820 c0000000026d7200 gpr[12] gpr[13]
000000001db60000 c0000000010aabe8 gpr[14] gpr[15]
c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17]
c00000000294d598 0000000000000000 gpr[18] gpr[19]
0000000000000000 0000000000001ff8 gpr[20] gpr[21]
0000000000000000 c00000000206d608 gpr[22] gpr[23]
c00000000278e0cc 0000000000000000 gpr[24] gpr[25]
000000002fff0000 c000000000000000 gpr[26] gpr[27]
0000000002000000 0000000000000028 gpr[28] gpr[29]
000000001db60000 0000000004750000 gpr[30] gpr[31]
0000000002000000 000000001db60000 nip msr
0000000000000000 0000000000000000 orig_r3 ctr
c00000000000c49c 0000000000000000 link xer
0000000000000000 0000000000000000 ccr softe
0000000000000000 0000000000000000 trap dar
0000000000000000 0000000000000000 dsisr result
0000000000000000 0000000000000000 ppr kuap
0000000000000000 0000000000000000 pad[2] pad[3]
This looks suspiciously like stack frames, not a pt_regs. If we look
closely we can see return addresses from the stack trace above,
c000000002004820 (start_kernel) and c00000000000c49c (start_here_common).
init_task->thread.regs is setup at build time in processor.h:
#define INIT_THREAD { \
.ksp = INIT_SP, \
.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
The early boot code where we setup the initial stack is:
LOAD_REG_ADDR(r3,init_thread_union)
/* set up a stack pointer */
LOAD_REG_IMMEDIATE(r1,THREAD_SIZE)
add r1,r3,r1
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD).
Which is far too small to contain a pt_regs.
So the result is init_task->thread.regs is pointing at some stack
frames on the init stack, not at a pt_regs.
We have gotten away with this for so long because with pt_regs at its
current size the MSR happens to point into the first frame, at a
location that is not written to by the early asm. With the 16 byte
expansion the MSR falls into the second frame, which is used by the
compiler, and collides with a saved register that tends to be
non-zero.
As far as I can see this has been wrong since the original merge of
64-bit ppc support, back in 2002.
Conceptually swapper should have no regs, it never entered from
userspace, and in fact that's what we do on 32-bit. It's also
presumably what the "bogus" comment is referring to.
So I think the right fix is to just not-initialise regs at all. I'm
slightly worried this will break some code that isn't prepared for a
NULL regs, but we'll have to see.
Remove the comment in head_64.S which refers to us setting up the
regs (even though we never did), and is otherwise not really accurate
any more.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200428123130.73078-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe204591cc ]
Building a kernel with clang sometimes fails with an objtool error in dlm:
fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc
The problem is that BUG() never returns and the compiler knows
that anything after it is unreachable, however the panic still
emits some code that does not get fully eliminated.
Having both BUG() and panic() is really pointless as the BUG()
kills the current process and the subsequent panic() never hits.
In most cases, we probably don't really want either and should
replace the DLM_ASSERT() statements with WARN_ON(), as has
been done for some of them.
Remove the BUG() here so the user at least sees the panic message
and we can reliably build randconfig kernels.
Fixes: e7fd41792f ("[DLM] The core of the DLM for GFS2/CLVM")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7faa8ffb6 ]
In function rockchip_dt_node_to_map, a new_map variable is
allocated by:
new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map),
GFP_KERNEL);
This uses devres and attaches new_map to the pinctrl driver.
This cause a leak since new_map is not released when the probed
driver is removed. Fix it by using kcalloc to allocate new_map
and free it in `rockchip_dt_free_map`
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200506100903.15420-1-dafna.hirschfeld@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 934ed3847a ]
In the probe function, in case of error, resources allocated in
'lp8788_setup_adc_channel()' must be released.
This can be achieved easily by using the devm_ variant of
'iio_channel_get()'.
This has the extra benefit to simplify the remove function and to axe the
'lp8788_release_adc_channel()' function which is now useless.
Fixes: 98a2766493 ("power_supply: Add new lp8788 charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b9f217433 ]
The outbound windows (PCIEPAUR(x), PCIEPALR(x)) describe a mapping between
a CPU address (which is determined by the window number 'x') and a
programmed PCI address - Thus allowing the controller to translate CPU
accesses into PCI accesses.
However the existing code incorrectly writes the CPU address - lets fix
this by writing the PCI address instead.
For memory transactions, existing DT users describe a 1:1 identity mapping
and thus this change should have no effect. However the same isn't true for
I/O.
Link: https://lore.kernel.org/r/20191004132941.6660-1-andrew.murray@arm.com
Fixes: c25da47788 ("PCI: rcar: Add Renesas R-Car PCIe driver")
Tested-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8508f4cba3 ]
Valentine reported seeing:
[ 3.626638] INFO: trying to register non-static key.
[ 3.626639] the code is fine but needs lockdep annotation.
[ 3.626640] turning off the locking correctness validator.
[ 3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116
[ 3.626646] Hardware name: HiKey960 (DT)
[ 3.626656] Workqueue: events deferred_probe_work_func
[ 3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
[ 3.640220] Call trace:
[ 3.640225] dump_backtrace+0x0/0x1b8
[ 3.640227] show_stack+0x20/0x30
[ 3.640230] dump_stack+0xec/0x158
[ 3.640234] register_lock_class+0x598/0x5c0
[ 3.640235] __lock_acquire+0x80/0x16c0
[ 3.640236] lock_acquire+0xf4/0x4a0
[ 3.640241] _raw_spin_lock_irqsave+0x70/0xa8
[ 3.640245] uart_add_one_port+0x388/0x4b8
[ 3.640248] pl011_register_port+0x70/0xf0
[ 3.640250] pl011_probe+0x184/0x1b8
[ 3.640254] amba_probe+0xdc/0x180
[ 3.640256] really_probe+0xe0/0x338
[ 3.640257] driver_probe_device+0x60/0xf8
[ 3.640259] __device_attach_driver+0x8c/0xd0
[ 3.640260] bus_for_each_drv+0x84/0xd8
[ 3.640261] __device_attach+0xe4/0x140
[ 3.640263] device_initial_probe+0x1c/0x28
[ 3.640265] bus_probe_device+0xa4/0xb0
[ 3.640266] deferred_probe_work_func+0x7c/0xb8
[ 3.640269] process_one_work+0x2c0/0x768
[ 3.640271] worker_thread+0x4c/0x498
[ 3.640272] kthread+0x14c/0x158
[ 3.640275] ret_from_fork+0x10/0x1c
Which seems to be due to the fact that after allocating the uap
structure, nothing initializes the spinlock.
Its a little confusing, as uart_port_spin_lock_init() is one
place where the lock is supposed to be initialized, but it has
an exception for the case where the port is a console.
This makes it seem like a deeper fix is needed to properly
register the console, but I'm not sure what that entails, and
Andy suggested that this approach is less invasive.
Thus, this patch resolves the issue by initializing the spinlock
in the driver, and resolves the resulting warning.
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-and-tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20200428184050.6501-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b73ee7ca ]
The IRQ log output is supposed to appear on a single line. However,
commit 3a2dc1677b ("i2c: pxa: Update debug function to dump more info
on error") resulted in it being printed one-entry-per-line, which is
excessively long.
Fixing this is not a trivial matter; using pr_cont() doesn't work as
the previous dev_dbg() may not have been compiled in, or may be
dynamic.
Since the rest of this function output is at error level, and is also
debug output, promote this to error level as well to avoid this
problem.
Reduce the number of always zero prefix digits to save screen real-
estate.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bca718988b ]
If we fails somewhere in 'v3_pci_probe()', we need to free 'host'.
Use the managed version of 'pci_alloc_host_bridge()' to do that easily.
The use of managed resources is already widely used in this driver.
Link: https://lore.kernel.org/r/20200418081637.1585-1-christophe.jaillet@wanadoo.fr
Fixes: 68a15eb7bd ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d99087c2d ]
If dwc3 fails to issue START_TRANSFER/UPDATE_TRANSFER command, then we
should properly end an active transfer and give back all the started
requests. However if it's for an isoc endpoint, the failure maybe due to
bus-expiry status. In this case, don't give back the requests and wait
for the next retry.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2bd1dcbe1 ]
Potentially, hvc_open() can be called in parallel when two tasks calls
open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add()
callback in the function fails, where it sets the tty->driver_data to
NULL, the parallel hvc_open() can see this NULL and cause a memory abort.
Hence, serialize hvc_open and check if tty->private_data is NULL before
proceeding ahead.
The issue can be easily reproduced by launching two tasks simultaneously
that does nothing but open() and close() on /dev/hvcX.
For example:
$ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 &
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75e82bec6b ]
qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq().
If the subsequent qdio_establish_thinint() fails, we miss to put the
DSCI again. Thus the DSCI isn't available for re-use. Given enough of
such errors, we could end up with having only the shared DSCI available.
Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with
such an error internally.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b6cc38f3f ]
The linked list entry from FIFO is peeked at
queue_pending_output_urbs() but the actual element pop-out is
performed outside the spinlock, and it's potentially racy.
Do delete the link at the right place inside the spinlock.
Fixes: 8fdff6a319 ("ALSA: snd-usb: implement new endpoint streaming model")
Link: https://lore.kernel.org/r/20200424074016.14301-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0bd62b640 ]
For computation of the the next frame size current value of fs/fps and
accumulated fractional parts of fs/fps are used, where values are stored
in Q16.16 format. This is quite natural for computing frame size for
asynchronous endpoints driven by explicit feedback, since in this case
fs/fps is a value provided by the feedback endpoint and it's already in
the Q format. If an error is accumulated over time, the device can
adjust fs/fps value to prevent buffer overruns/underruns.
But for synchronous endpoints the accuracy provided by these computations
is not enough. Due to accumulated error the driver periodically produces
frames with incorrect size (+/- 1 audio sample).
This patch fixes this issue by implementing a different algorithm for
frame size computation. It is based on accumulating of the remainders
from division fs/fps and it doesn't accumulate errors over time. This
new method is enabled for synchronous and adaptive playback endpoints.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200424022449.14972-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3436ce60c ]
gasket_sysfs_register_store() invokes get_mapping(), which returns a
reference of the specified gasket_sysfs_mapping object to "mapping" with
increased refcnt.
When gasket_sysfs_register_store() returns, local variable "mapping"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.
The reference counting issue happens in one exception handling path of
gasket_sysfs_register_store(). When gasket_dev is NULL, the function
forgets to decrease the refcnt increased by get_mapping(), causing a
refcnt leak.
Fix this issue by calling put_mapping() when gasket_dev is NULL.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1587618941-13718-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57a66838e1 ]
gasket_sysfs_put_attr() invokes get_mapping(), which returns a reference
of the specified gasket_sysfs_mapping object to "mapping" with increased
refcnt.
When gasket_sysfs_put_attr() returns, local variable "mapping" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one path of
gasket_sysfs_put_attr(). When mapping attribute is unknown, the function
forgets to decrease the refcnt increased by get_mapping(), causing a
refcnt leak.
Fix this issue by calling put_mapping() when put attribute fails due to
unknown attribute.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1587618895-13660-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 459b1f86f1 ]
As far as the device is concerned the dma address is the physical
address. There is no need to convert it to a physical address,
especially not using dma-direct internals that are not available
to drivers and which will interact badly with IOMMUs. Last but not
least the commit introducing it claimed to just fix a type issue,
but actually changed behavior.
Fixes: 6e37ccf78a ("firmware: qcom_scm: Use proper types for dma mappings")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200414123136.441454-1-hch@lst.de
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b4e8e93ec ]
The rza1l_swio_entries referred to the wrong array rza1h_swio_pins,
which was intended to be rza1l_swio_pins. So let's fix it.
This is detected by the following gcc warning:
drivers/pinctrl/pinctrl-rza1.c:401:35: warning: ‘rza1l_swio_pins’
defined but not used [-Wunused-const-variable=]
static const struct rza1_swio_pin rza1l_swio_pins[] = {
^~~~~~~~~~~~~~~
Fixes: 039bc58e73 ("pinctrl: rza1: Add support for RZ/A1L")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200417111604.19143-1-yanaijie@huawei.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad40f52560 ]
The MFW may make a call to qed and then to qedf for protocol statistics
while the function is still probing. If this happens it's possible that
some members of the struct qedf_ctx may not be fully initialized which can
result in a NULL pointer dereference or general protection fault.
To prevent this, add a new flag call QEDF_PROBING and set it when the
__qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data()
function we can check if the function is still probing and return
immediantely before any uninitialized structures can be touched.
Link: https://lore.kernel.org/r/20200416084314.18851-9-skashyap@marvell.com
Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72b29215ac ]
Fixing several unit name warnings:
Warning (unit_address_vs_reg): /oscillator@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /oscillator@1: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /oscillator@2: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/trip-point@1: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/trips/cpu_crit@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /thermal-zones/cpu_thermal/cooling-maps/map@1: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /reserved-memory/vpu_dma_mem_region: node has a reg or ranges property, but no unit name
Warning (simple_bus_reg): /soc/pinctrl@10005000: simple-bus unit address format error, expected "1000b000"
Warning (simple_bus_reg): /soc/interrupt-controller@10220000: simple-bus unit address format error, expected "10221000"
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20200210063523.133333-4-hsinyi@chromium.org
[mb: drop fixes for '_' in property name]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2ac07c060 ]
Since the purgatory is a special stand-alone binary, various profiling
and sanitizing options must be disabled. Having these options enabled
typically will cause dependencies on various special symbols exported by
special libs / stubs used by these frameworks. Since the purgatory is
special, it is not linked against these stubs causing missing symbols in
the purgatory if these options are not disabled.
Sync the set of disabled profiling and sanitizing options with that from
drivers/firmware/efi/libstub/Makefile, adding
-DDISABLE_BRANCH_PROFILING to the CFLAGS and setting:
GCOV_PROFILE := n
UBSAN_SANITIZE := n
This fixes broken references to ftrace_likely_update() when
CONFIG_TRACE_BRANCH_PROFILING is enabled and to __gcov_init() and
__gcov_exit() when CONFIG_GCOV_KERNEL is enabled.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200317130841.290418-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4919b33b63 ]
The adapter info MAD is used to send the client info and receive the host
info as a response. A persistent buffer is used and as such the client info
is overwritten after the response. During the course of a normal adapter
reset the client info is refreshed in the buffer in preparation for sending
the adapter info MAD.
However, in the special case of LPM where we reenable the CRQ instead of a
full CRQ teardown and reset we fail to refresh the client info in the
adapter info buffer. As a result, after Live Partition Migration (LPM) we
erroneously report the host's info as our own.
[mkp: typos]
Link: https://lore.kernel.org/r/20200603203632.18426-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b646abc5b ]
Currently apparmor_sk_clone_security() does not check for existing
label/peer in the 'new' struct sock; it just overwrites it, if any
(with another reference to the label of the source sock.)
static void apparmor_sk_clone_security(const struct sock *sk,
struct sock *newsk)
{
struct aa_sk_ctx *ctx = SK_CTX(sk);
struct aa_sk_ctx *new = SK_CTX(newsk);
new->label = aa_get_label(ctx->label);
new->peer = aa_get_label(ctx->peer);
}
This might leak label references, which might overflow under load.
Thus, check for and put labels, to prevent such errors.
Note this is similarly done on:
static int apparmor_socket_post_create(struct socket *sock, ...)
...
if (sock->sk) {
struct aa_sk_ctx *ctx = SK_CTX(sock->sk);
aa_put_label(ctx->label);
ctx->label = aa_get_label(label);
}
...
Context:
-------
The label reference count leak is observed if apparmor_sock_graft()
is called previously: this sets the 'ctx->label' field by getting
a reference to the current label (later overwritten, without put.)
static void apparmor_sock_graft(struct sock *sk, ...)
{
struct aa_sk_ctx *ctx = SK_CTX(sk);
if (!ctx->label)
ctx->label = aa_get_current_label();
}
And that is the case on crypto/af_alg.c:af_alg_accept():
int af_alg_accept(struct sock *sk, struct socket *newsock, ...)
...
struct sock *sk2;
...
sk2 = sk_alloc(...);
...
security_sock_graft(sk2, newsock);
security_sk_clone(sk, sk2);
...
Apparently both calls are done on their own right, especially for
other LSMs, being introduced in 2010/2014, before apparmor socket
mediation in 2017 (see commits [1,2,3,4]).
So, it looks OK there! Let's fix the reference leak in apparmor.
Test-case:
---------
Exercise that code path enough to overflow label reference count.
$ cat aa-refcnt-af_alg.c
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <sys/socket.h>
#include <linux/if_alg.h>
int main() {
int sockfd;
struct sockaddr_alg sa;
/* Setup the crypto API socket */
sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
if (sockfd < 0) {
perror("socket");
return 1;
}
memset(&sa, 0, sizeof(sa));
sa.salg_family = AF_ALG;
strcpy((char *) sa.salg_type, "rng");
strcpy((char *) sa.salg_name, "stdrng");
if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
perror("bind");
return 1;
}
/* Accept a "connection" and close it; repeat. */
while (!close(accept(sockfd, NULL, 0)));
return 0;
}
$ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c
$ ./aa-refcnt-af_alg
<a few hours later>
[ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000
...
[ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70
...
[ 9928.514286] security_sk_clone+0x33/0x50
[ 9928.514807] af_alg_accept+0x81/0x1c0 [af_alg]
[ 9928.516091] alg_accept+0x15/0x20 [af_alg]
[ 9928.516682] SYSC_accept4+0xff/0x210
[ 9928.519609] SyS_accept+0x10/0x20
[ 9928.520190] do_syscall_64+0x73/0x130
[ 9928.520808] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Note that other messages may be seen, not just overflow, depending on
the value being incremented by kref_get(); on another run:
[ 7273.182666] refcount_t: saturated; leaking memory.
...
[ 7273.185789] refcount_t: underflow; use-after-free.
Kprobes:
-------
Using kprobe events to monitor sk -> sk_security -> label -> count (kref):
Original v5.7 (one reference leak every iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6
Patched v5.7 (zero reference leak per iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
Commits:
-------
[1] commit 507cad355f ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets")
[2] commit 4c63f83c2c ("crypto: af_alg - properly label AF_ALG socket")
[3] commit 2acce6aa9f ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning)
[4] commit 56974a6fcf ("apparmor: add base infastructure for socket mediation")
Fixes: 56974a6fcf ("apparmor: add base infastructure for socket mediation")
Reported-by: Brian Moyles <bmoyles@netflix.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd2569fbb0 ]
Fix two issues with introspecting the task mode.
1. If a task is attached to a unconfined profile that is not the
ns->unconfined profile then. Mode the mode is always reported
as -
$ ps -Z
LABEL PID TTY TIME CMD
unconfined 1287 pts/0 00:00:01 bash
test (-) 1892 pts/0 00:00:00 ps
instead of the correct value of (unconfined) as shown below
$ ps -Z
LABEL PID TTY TIME CMD
unconfined 2483 pts/0 00:00:01 bash
test (unconfined) 3591 pts/0 00:00:00 ps
2. if a task is confined by a stack of profiles that are unconfined
the output of label mode is again the incorrect value of (-) like
above, instead of (unconfined). This is because the visibile
profile count increment is skipped by the special casing of
unconfined.
Fixes: f1bd904175 ("apparmor: add the base fns() for domain labels")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72d24accf0 ]
When System.map was generated, the kernel used mksysmap to
filter the kernel symbols, but all the symbols with the
second letter 'L' in the kernel were filtered out, not just
the symbols starting with 'dot + L'.
For example:
ashimida@ubuntu:~/linux$ cat System.map |grep ' .L'
ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L'
ffff0000088028e0 t bLength_show
......
ffff0000092e0408 b PLLP_OUTC_lock
ffff0000092e0410 b PLLP_OUTA_lock
The original intent should be to filter out all local symbols
starting with '.L', so the dot should be escaped.
Fixes: 00902e9847 ("mksysmap: Add h8300 local symbol pattern")
Signed-off-by: ashimida <ashimida@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc8b086d9d ]
When the commit adding ntb_default_port_number() and
ntb_default_peer_port_number() entered the kernel there was no
users of it so it was impossible to tell what the API needed.
When a user finally landed a year later (ntb_pingpong) there were
more NTB topologies were created and no consideration was considered
to how other drivers had changed.
Now that there is a user it can be fixed to provide a sensible default
for the legacy drivers that do not implement ntb_{peer_}port_number().
Seeing ntb_pingpong doesn't check error codes returning EINVAL was also
not sensible.
Patches for ntb_pingpong and ntb_perf follow (which are broken
otherwise) to support hardware that doesn't have port numbers. This is
important not only to not break support with existing drivers but for
the cross link topology which, due to its perfect symmetry, cannot
assign unique port numbers to each side.
Fixes: 1e5301196a ("NTB: Add indexed ports NTB API")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca93c45755 ]
This commit fixes pingpong support for existing drivers that do not
implement ntb_default_port_number() and ntb_default_peer_port_number().
This is required for hardware (like the crosslink topology of
switchtec) which cannot assign reasonable port numbers to each port due
to its perfect symmetry.
Instead of picking the doorbell to use based on the the index of the
peer, we use the peer's port number. This is a bit clearer and easier
to understand.
Fixes: c7aeb0afdc ("NTB: ntb_pp: Add full multi-port NTB API support")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Tested-by: Alexander Fomichev <fomichev.ru@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca162ce981 ]
Even in failed case of pm_runtime_get_sync(), the usage_count is
incremented. In order to keep the usage_count with correct value call
appropriate pm_runtime_put().
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be5470e0c2 ]
'mem=" option is an easy way to put high pressure on memory during
some test. Hence after applying the memory limit, instead of total
mem, the actual usable memory should be considered when reserving mem
for crashkernel. Otherwise the boot up may experience OOM issue.
E.g. it would reserve 4G prior to the change and 512M afterward, if
passing
crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G",
and mem=5G on a 256G machine.
This issue is powerpc specific because it puts higher priority on
fadump and kdump reservation than on "mem=". Referring the following
code:
if (fadump_reserve_mem() == 0)
reserve_crashkernel();
...
/* Ensure that total memory size is page-aligned. */
limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
memblock_enforce_memory_limit(limit);
While on other arches, the effect of "mem=" takes a higher priority
and pass through memblock_phys_mem_size() before calling
reserve_crashkernel().
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1585749644-4148-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e5095eebe ]
Versions of VMD with the Host Physical Address shadow register use this
register to calculate the bus address offset needed to do guest
passthrough of the domain. This register shadows the Host Physical
Address registers including the resource type bits. After calculating
the offset, the extra resource type bits lead to the VMD resources being
over-provisioned at the front and under-provisioned at the back.
Example:
pci 10000:80:02.0: reg 0x10: [mem 0xf801fffc-0xf803fffb 64bit]
Expected:
pci 10000:80:02.0: reg 0x10: [mem 0xf8020000-0xf803ffff 64bit]
If other devices are mapped in the over-provisioned front, it could lead
to resource conflict issues with VMD or those devices.
Link: https://lore.kernel.org/r/20200528030240.16024-3-jonathan.derrick@intel.com
Fixes: a1a3017013 ("PCI: vmd: Fix shadow offsets to reflect spec changes")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4abc6b12e ]
nfsd4_process_cb_update() invokes svc_xprt_get(), which increases the
refcount of the "c->cn_xprt".
The reference counting issue happens in one exception handling path of
nfsd4_process_cb_update(). When setup callback client failed, the
function forgets to decrease the refcnt increased by svc_xprt_get(),
causing a refcnt leak.
Fix this issue by calling svc_xprt_put() when setup callback client
failed.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
