[ Upstream commit 6c3ca6654a74dd396bc477839ba8d9792eced441 ]
Both acpi_table_upgrade() and acpi_boot_table_init() are defined as
empty functions under !CONFIG_ACPI_TABLE_UPGRADE and !CONFIG_ACPI in
include/linux/acpi.h, there are no implicit declaration errors with
various configs.
#ifdef CONFIG_ACPI_TABLE_UPGRADE
void acpi_table_upgrade(void);
#else
static inline void acpi_table_upgrade(void) { }
#endif
#ifdef CONFIG_ACPI
...
void acpi_boot_table_init (void);
...
#else /* !CONFIG_ACPI */
...
static inline void acpi_boot_table_init(void)
{
}
...
#endif /* !CONFIG_ACPI */
As Huacai suggested, CONFIG_ACPI_TABLE_UPGRADE is ugly and not necessary
here, just remove it. At the same time, just keep CONFIG_ACPI to prevent
potential build errors in future, and give a signal to indicate the code
is ACPI-specific. For the same reason, we also put acpi_table_upgrade()
under CONFIG_ACPI.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Stable-dep-of: 98662be7ef20 ("LoongArch: Init acpi_gbl_use_global_lock to false")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60cd16a3b7439ccb699d0bf533799eeb894fd217 ]
During the detaching of Marvell's SAS/SATA controller, the original code
calls cancel_delayed_work() in mvs_free() to cancel the delayed work
item mwq->work_q. However, if mwq->work_q is already running, the
cancel_delayed_work() may fail to cancel it. This can lead to
use-after-free scenarios where mvs_free() frees the mvs_info while
mvs_work_queue() is still executing and attempts to access the
already-freed mvs_info.
A typical race condition is illustrated below:
CPU 0 (remove) | CPU 1 (delayed work callback)
mvs_pci_remove() |
mvs_free() | mvs_work_queue()
cancel_delayed_work() |
kfree(mvi) |
| mvi-> // UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled and any executing
delayed work item completes before the mvs_info is deallocated.
This bug was found by static analysis.
Fixes: 20b09c2992 ("[SCSI] mvsas: add support for 94xx; layout change; bug fixes")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b1bb980fd7cae126ee3d59f817068a13e321b07 ]
The original commit set all cores in a cluster to a shared policy, but
did not update set_target to apply a frequency change to all cores for
the policy. This caused most cores to remain stuck at their boot
frequency.
Fixes: be4ae8c19492 ("cpufreq: tegra186: Share policy per cluster")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49ef6491106209c595476fc122c3922dfd03253f ]
struct tegra_bpmp::clocks is a pointer to a dynamically allocated array
of pointers to 'struct tegra_bpmp_clk'.
But the size of the allocated area is calculated like it is an array
containing actual 'struct tegra_bpmp_clk' objects - it's not true, there
are just pointers.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: 2db12b15c6 ("clk: tegra: Register clocks from root to leaf")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1624dead9a4d288a594fdf19735ebfe4bb567cb8 ]
The conditional check for the PLL0 multiplier 'm' used a logical AND
instead of OR, making the range check ineffective. This patch replaces
&& with || to correctly reject invalid values of 'm' that are either
less than or equal to 0 or greater than LPC18XX_PLL0_MSEL_MAX.
This ensures proper bounds checking during clk rate setting and rounding.
Fixes: b04e0b8fd5 ("clk: add lpc18xx cgu clk driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[sboyd@kernel.org: 'm' is unsigned so remove < condition]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b46a3d323a5b7942e65025254c13801d0f475f02 ]
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Stable-dep-of: 1624dead9a4d ("clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e121370a7ad3414c7f3a77002e2b18abe5c6fe1 ]
The `flags` in |struct mtk_mux| are core clk flags, not mux clk flags.
Passing one to the other is wrong.
Since there aren't any actual users adding CLK_MUX_* flags, just drop it
for now.
Fixes: b05ea33143 ("clk: mediatek: clk-mux: Add .determine_rate() callback")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c4c26b624790098988c1034541087e3e5ed5bed ]
The infrastructure gate for the HDMI specific crystal needs the
top_hdmi_xtal clock to be configured in order to ungate the 26m
clock to the HDMI IP, and it wouldn't work without.
Reparent the infra_ao_hdmi_26m clock to top_hdmi_xtal to fix that.
Fixes: e2edf59dec ("clk: mediatek: Add MT8195 infrastructure clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48918cacefd226af44373e914e63304927c0e7dc ]
The test starts a workload and then opens events. If the events fail
to open, for example because of perf_event_paranoid, the gopipe of the
workload is leaked and the file descriptor leak check fails when the
test exits. To avoid this cancel the workload when opening the events
fails.
Before:
```
$ perf test -vv 7
7: PERF_RECORD_* events & perf_sample fields:
--- start ---
test child forked, pid 1189568
Using CPUID GenuineIntel-6-B7-1
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
exclude_kernel 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
exclude_kernel 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3
Attempt to add: software/cpu-clock/
..after resolving event: software/config=0/
cpu-clock -> software/cpu-clock/
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
sample_type IP|TID|TIME|CPU
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
enable_on_exec 1
task 1
sample_id_all 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
{ wakeup_events, wakeup_watermark } 1
------------------------------------------------------------
sys_perf_event_open: pid 1189569 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
perf_evlist__open: Permission denied
---- end(-2) ----
Leak of file descriptor 6 that opened: 'pipe:[14200347]'
---- unexpected signal (6) ----
iFailed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
#0 0x565358f6666e in child_test_sig_handler builtin-test.c:311
#1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0
#2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44
#3 0x7f29ce849cc2 in raise raise.c:27
#4 0x7f29ce8324ac in abort abort.c:81
#5 0x565358f662d4 in check_leaks builtin-test.c:226
#6 0x565358f6682e in run_test_child builtin-test.c:344
#7 0x565358ef7121 in start_command run-command.c:128
#8 0x565358f67273 in start_test builtin-test.c:545
#9 0x565358f6771d in __cmd_test builtin-test.c:647
#10 0x565358f682bd in cmd_test builtin-test.c:849
#11 0x565358ee5ded in run_builtin perf.c:349
#12 0x565358ee6085 in handle_internal_command perf.c:401
#13 0x565358ee61de in run_argv perf.c:448
#14 0x565358ee6527 in main perf.c:555
#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74
#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
#17 0x565358e391c1 in _start perf[851c1]
7: PERF_RECORD_* events & perf_sample fields : FAILED!
```
After:
```
$ perf test 7
7: PERF_RECORD_* events & perf_sample fields : Skip (permissions)
```
Fixes: 16d00fee70 ("perf tests: Move test__PERF_RECORD into separate object")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c17dda8013495d8132c976cbf349be9949d0fbd1 ]
If a user specifies an AUX buffer larger than 2 GiB, the returned size
may exceed 0x80000000. Since the err variable is defined as a signed
32-bit integer, such a value overflows and becomes negative.
As a result, the perf record command reports an error:
0x146e8 [0x30]: failed to process type: 71 [Unknown error 183711232]
Change the type of the err variable to a signed 64-bit integer to
accommodate large buffer sizes correctly.
Fixes: d5652d865e ("perf session: Add ability to skip 4GiB or more")
Reported-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250808-perf_fix_big_buffer_size-v1-1-45f45444a9a4@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50b8f1d5bf4ad7f09ef8012ccf5f94f741df827b ]
The Neoverse CPUs follow the common data source encoding, and other
CPU variants can share the same format.
Rename the CPU list and data source definitions as common data source
names. This change prepares for appending more CPU variants.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20241003185322.192357-3-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Stable-dep-of: cb300e351505 ("perf arm_spe: Correct memory level for remote access")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43fa1141e2c1af79c91aaa4df03e436c415a6fc3 ]
The lzma_is_compressed and gzip_is_compressed functions are declared
to return a "bool" type, but in case of an error (e.g., file open
failure), they incorrectly returned -1.
A bool type is a boolean value that is either true or false.
Returning -1 for a bool return type can lead to unexpected behavior
and may violate strict type-checking in some compilers.
Fix the return value to be false in error cases, ensuring the function
adheres to its declared return type improves for preventing potential
bugs related to type mismatch.
Fixes: 4b57fd44b6 ("perf tools: Add lzma_is_compressed function")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/r/20250822162506.316844-3-ysk@kzalloc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47b13635dabc14f1c2fdcaa5468b47ddadbdd1b5 ]
determine_rate() is expected to return an error code, or 0 on success.
clk_sam9x5_peripheral_determine_rate() has a branch that returns the
parent rate on a certain case. This is the behavior of round_rate(),
so let's go ahead and fix this by setting req->rate.
Fixes: b4c115c761 ("clk: at91: clk-peripheral: add support for changeable parent rate")
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8327bd4fcb6c1dab01ce5c6ff00b42496836dcd2 upstream.
With `CONFIG_TRACE_MMIO_ACCESS=y`, the `{read,write}{b,w,l,q}{_relaxed}()`
mmio accessors unconditionally call `log_{post_}{read,write}_mmio()`
helpers, which in turn call the ftrace ops for `rwmmio` trace events
This adds a performance penalty per mmio accessor call, even when
`rwmmio` events are disabled at runtime (~80% overhead on local
measurement).
Guard these with `tracepoint_enabled()`.
Signed-off-by: Varad Gautam <varadgautam@google.com>
Fixes: 210031971c ("asm-generic/io: Add logging support for MMIO accessors")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72d271a7baa7062cb27e774ac37c5459c6d20e22 upstream.
Userspace generally expects APIs that return -EMSGSIZE to allow for them
to adjust their buffer size and retry the operation. However, the
fscontext log would previously clear the message even in the -EMSGSIZE
case.
Given that it is very cheap for us to check whether the buffer is too
small before we remove the message from the ring buffer, let's just do
that instead. While we're at it, refactor some fscontext_read() into a
separate helper to make the ring buffer logic a bit easier to read.
Fixes: 007ec26cdc ("vfs: Implement logging through fs_context")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/20250807-fscontext-log-cleanups-v3-1-8d91d6242dc3@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9c206324eeb213957a567a9d066bdeb355c7491 upstream.
The cdnsp-pci driver uses pcim_enable_device() to enable a PCI device,
which means the device will be automatically disabled on driver detach
through the managed device framework. The manual pci_disable_device()
call in the error path is therefore redundant.
Found via static anlaysis and this is similar to commit 99ca0b57e49f
("thermal: intel: int340x: processor: Fix warning during module unload").
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250903141613.2535472-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be5ae730ffa6fd774a00a4705c1e11e078b08ca1 upstream.
Right now the interrupt handler first reads all updated status registers
and only then clears the interrupts. It's possible that a duplicate
interrupt for a changed register or plug state comes in after the
interrupts have been processed but before they have been cleared:
* plug is inserted, TPS_REG_INT_PLUG_EVENT is set
* TPS_REG_INT_EVENT1 is read
* tps6598x_handle_plug_event() has run and registered the plug
* plug is removed again, TPS_REG_INT_PLUG_EVENT is set (again)
* TPS_REG_INT_CLEAR1 is written, TPS_REG_INT_PLUG_EVENT is cleared
We then have no plug connected and no pending interrupt but the tipd
core still thinks there is a plug. It's possible to trigger this with
e.g. a slightly broken Type-C to USB A converter.
Fix this by first clearing the interrupts and only then reading the
updated registers.
Fixes: 45188f27b3 ("usb: typec: tipd: Add support for Apple CD321X")
Fixes: 0a4c005bd1 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc: stable@kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-1-4e99c8649024@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d3c4cd5c62f24bb3cb4511b7a95df707635e00a upstream.
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before.
Fixes: 4a2c7217cd ("net: usb: asix: ax88772: manage PHY PM from MAC")
Reported-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Closes: https://lore.kernel.org/all/DCGHG5UJT9G3.2K1GHFZ3H87T0@gmail.com
Tested-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/b5ea8296-f981-445d-a09a-2f389d7f6fdd@samsung.com
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251005081203.3067982-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4002ee98c022d671ecc1e4a84029e9ae7d8a5603 upstream.
While the API contract in docs doesn't specify it explicitly, the
generic implementation of the get_function_name() callback from struct
pinmux_ops - pinmux_generic_get_function_name() - can fail and return
NULL. This is already checked in pinmux_check_ops() so add a similar
check in pinmux_func_name_to_selector() instead of passing the returned
pointer right down to strcmp() where the NULL can get dereferenced. This
is normal operation when adding new pinfunctions.
Cc: stable@vger.kernel.org
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6df164e29bd4e6505c5a2e0e5f1e1f6957a16a42 upstream.
In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes
checksum.data to be set to NULL. This triggers a NPD when accessing
checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that
the value of checksum.len is not less than XDR_UNIT.
Fixes: 0653028e8f ("SUNRPC: Convert gss_verify_header() to use xdr_stream")
Cc: stable@kernel.org
Signed-off-by: Lei Lu <llfamsec@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3366a04770eea807f2826cbdb96934dd8c9bf79 upstream.
Struct ff_effect_compat is embedded twice inside
uinput_ff_upload_compat, contains internal padding. In particular, there
is a hole after struct ff_replay to satisfy alignment requirements for
the following union member. Without clearing the structure,
copy_to_user() may leak stack data to userspace.
Initialize ff_up_compat to zero before filling valid fields.
Fixes: 2d56f3a32c ("Input: refactor evdev 32bit compat to be shareable with uinput")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://lore.kernel.org/r/20250928063737.74590-1-zhen.ni@easystack.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9e6aa994917ee602798bbb03180a194b37865bb upstream.
devm_kcalloc() may fail. ndtest_probe() allocates three DMA address
arrays (dcr_dma, label_dma, dimm_dma) and later unconditionally uses
them in ndtest_nvdimm_init(), which can lead to a NULL pointer
dereference under low-memory conditions.
Check all three allocations and return -ENOMEM if any allocation fails,
jumping to the common error path. Do not emit an extra error message
since the allocator already warns on allocation failure.
Fixes: 9399ab61ad ("ndtest: Add dimms to the two buses")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acf943e9768ec9d9be80982ca0ebc4bfd6b7631e upstream.
When orphan file feature is enabled, inode can be tracked as orphan
either in the standard orphan list or in the orphan file. The first can
be tested by checking ei->i_orphan list head, the second is recorded by
EXT4_STATE_ORPHAN_FILE inode state flag. There are several places where
we want to check whether inode is tracked as orphan and only some of
them properly check for both possibilities. Luckily the consequences are
mostly minor, the worst that can happen is that we track an inode as
orphan although we don't need to and e2fsck then complains (resulting in
occasional ext4/307 xfstest failures). Fix the problem by introducing a
helper for checking whether an inode is tracked as orphan and use it in
appropriate places.
Fixes: 4a79a98c7b ("ext4: Improve scalability of ext4 orphan file handling")
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Message-ID: <20250925123038.20264-2-jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88daf2f448aad05a2e6df738d66fe8b0cf85cee0 upstream.
If client doesn't negotiate with SMB3.1.1 POSIX Extensions,
then proper error code won't be returned due to overwriting.
Return error immediately.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8168b4faf1d62cbb320a3e518ad31cdd567cb05 upstream.
Automatically disable kaslr when the kernel loads from kexec_file.
kexec_file loads the secondary kernel image to a non-linked address,
inherently providing KASLR-like randomization.
However, on LoongArch where System RAM may be non-contiguous, enabling
KASLR for the second kernel may relocate it to an invalid memory region
and cause a boot failure. Thus, we disable KASLR when "kexec_file" is
detected in the command line.
To ensure compatibility with older kernels loaded via kexec_file, this
patch should be backported to stable branches.
Cc: stable@vger.kernel.org
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d33a030c566e1f105cd5bf27f37940b6367f3be upstream.
There is a race condition between dm device suspend and table load that
can lead to null pointer dereference. The issue occurs when suspend is
invoked before table load completes:
BUG: kernel NULL pointer dereference, address: 0000000000000054
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 6798 Comm: dmsetup Not tainted 6.6.0-g7e52f5f0ca9b #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
RIP: 0010:blk_mq_wait_quiesce_done+0x0/0x50
Call Trace:
<TASK>
blk_mq_quiesce_queue+0x2c/0x50
dm_stop_queue+0xd/0x20
__dm_suspend+0x130/0x330
dm_suspend+0x11a/0x180
dev_suspend+0x27e/0x560
ctl_ioctl+0x4cf/0x850
dm_ctl_ioctl+0xd/0x20
vfs_ioctl+0x1d/0x50
__se_sys_ioctl+0x9b/0xc0
__x64_sys_ioctl+0x19/0x30
x64_sys_call+0x2c4a/0x4620
do_syscall_64+0x9e/0x1b0
The issue can be triggered as below:
T1 T2
dm_suspend table_load
__dm_suspend dm_setup_md_queue
dm_mq_init_request_queue
blk_mq_init_allocated_queue
=> q->mq_ops = set->ops; (1)
dm_stop_queue / dm_wait_for_completion
=> q->tag_set NULL pointer! (2)
=> q->tag_set = set; (3)
Fix this by checking if a valid table (map) exists before performing
request-based suspend and waiting for target I/O. When map is NULL,
skip these table-dependent suspend steps.
Even when map is NULL, no I/O can reach any target because there is
no table loaded; I/O submitted in this state will fail early in the
DM layer. Skipping the table-dependent suspend logic in this case
is safe and avoids NULL pointer dereferences.
Fixes: c4576aed8d ("dm: fix request-based dm's use of dm_wait_for_completion")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f597c2cdb9d3263a6fce07c4fc0a9eaa8e8fc43 upstream.
When suspend and load run concurrently, before q->mq_ops is set in
blk_mq_init_allocated_queue(), __dm_suspend() skip dm_stop_queue(). As a
result, the queue's quiesce depth is not incremented.
Later, once table load has finished and __dm_resume() runs, which triggers
q->quiesce_depth ==0 warning in blk_mq_unquiesce_queue():
Call Trace:
<TASK>
dm_start_queue+0x16/0x20 [dm_mod]
__dm_resume+0xac/0xb0 [dm_mod]
dm_resume+0x12d/0x150 [dm_mod]
do_resume+0x2c2/0x420 [dm_mod]
dev_suspend+0x30/0x130 [dm_mod]
ctl_ioctl+0x402/0x570 [dm_mod]
dm_ctl_ioctl+0x23/0x30 [dm_mod]
Fix this by explicitly tracking whether the request queue was
stopped in __dm_suspend() via a new DMF_QUEUE_STOPPED flag.
Only call dm_start_queue() in __dm_resume() if the queue was
actually stopped.
Fixes: e70feb8b3e ("blk-mq: support concurrent queue quiesce/unquiesce")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
