This reverts commit 8f740c11d8 which is
commit 379a33786d upstream.
It breaks the build due to a dependant upstream patch being reverted
earlier in the Android tree because of ABI breakages and it not being
needed at all. So it is safe to remove here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ibc77017d0655165eb6962bf722c7cbbd8cc17480
Changes in 5.10.150
ALSA: oss: Fix potential deadlock at unregistration
ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
ALSA: usb-audio: Fix potential memory leaks
ALSA: usb-audio: Fix NULL dererence at error path
ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530
ALSA: hda/realtek: Correct pin configs for ASUS G533Z
ALSA: hda/realtek: Add quirk for ASUS GV601R laptop
ALSA: hda/realtek: Add Intel Reference SSID to support headset keys
mtd: rawnand: atmel: Unmap streaming DMA mappings
cifs: destage dirty pages before re-reading them for cache=none
cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message
iio: dac: ad5593r: Fix i2c read protocol requirements
iio: ltc2497: Fix reading conversion results
iio: adc: ad7923: fix channel readings for some variants
iio: pressure: dps310: Refactor startup procedure
iio: pressure: dps310: Reset chip after timeout
usb: add quirks for Lenovo OneLink+ Dock
can: kvaser_usb: Fix use of uninitialized completion
can: kvaser_usb_leaf: Fix overread with an invalid command
can: kvaser_usb_leaf: Fix TX queue out of sync after restart
can: kvaser_usb_leaf: Fix CAN state after restart
mmc: sdhci-sprd: Fix minimum clock limit
fs: dlm: fix race between test_bit() and queue_work()
fs: dlm: handle -EBUSY first in lock arg validation
HID: multitouch: Add memory barriers
quota: Check next/prev free block number after reading from quota file
platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure
ASoC: wcd9335: fix order of Slimbus unprepare/disable
ASoC: wcd934x: fix order of Slimbus unprepare/disable
hwmon: (gsc-hwmon) Call of_node_get() before of_find_xxx API
regulator: qcom_rpm: Fix circular deferral regression
RISC-V: Make port I/O string accessors actually work
parisc: fbdev/stifb: Align graphics memory size to 4MB
riscv: Allow PROT_WRITE-only mmap()
riscv: Make VM_WRITE imply VM_READ
riscv: Pass -mno-relax only on lld < 15.0.0
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
nvme-pci: set min_align_mask before calculating max_hw_sectors
drm/virtio: Check whether transferred 2D BO is shmem
drm/udl: Restore display mode on resume
block: fix inflight statistics of part0
mm/mmap: undo ->mmap() when arch_validate_flags() fails
PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
powerpc/boot: Explicitly disable usage of SPE instructions
scsi: qedf: Populate sysfs attributes for vport
fbdev: smscufx: Fix use-after-free in ufx_ops_open()
btrfs: fix race between quota enable and quota rescan ioctl
f2fs: increase the limit for reserve_root
f2fs: fix to do sanity check on destination blkaddr during recovery
f2fs: fix to do sanity check on summary info
hardening: Clarify Kconfig text for auto-var-init
hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO
hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
jbd2: wake up journal waiters in FIFO order, not LIFO
jbd2: fix potential buffer head reference count leak
jbd2: fix potential use-after-free in jbd2_fc_wait_bufs
jbd2: add miss release buffer head in fc_do_one_pass()
ext4: avoid crash when inline data creation follows DIO write
ext4: fix null-ptr-deref in ext4_write_info
ext4: make ext4_lazyinit_thread freezable
ext4: fix check for block being out of directory size
ext4: don't increase iversion counter for ea_inodes
ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate
ext4: place buffer head allocation before handle start
ext4: fix miss release buffer head in ext4_fc_write_inode
ext4: fix potential memory leak in ext4_fc_record_modified_inode()
ext4: fix potential memory leak in ext4_fc_record_regions()
ext4: update 'state->fc_regions_size' after successful memory allocation
livepatch: fix race between fork and KLP transition
ftrace: Properly unset FTRACE_HASH_FL_MOD
ring-buffer: Allow splice to read previous partially read pages
ring-buffer: Have the shortest_full queue be the shortest not longest
ring-buffer: Check pending waiters when doing wake ups as well
ring-buffer: Add ring_buffer_wake_waiters()
ring-buffer: Fix race between reset page and reading page
tracing: Disable interrupt or preemption before acquiring arch_spinlock_t
thunderbolt: Explicitly enable lane adapter hotplug events at startup
efi: libstub: drop pointless get_memory_map() call
media: cedrus: Set the platform driver data earlier
KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility
KVM: nVMX: Unconditionally purge queued/injected events on nested "exit"
KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS
staging: greybus: audio_helper: remove unused and wrong debugfs usage
drm/nouveau/kms/nv140-: Disable interlacing
drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table()
drm/i915: Fix watermark calculations for gen12+ RC CCS modifier
drm/i915: Fix watermark calculations for gen12+ MC CCS modifier
smb3: must initialize two ACL struct fields to zero
selinux: use "grep -E" instead of "egrep"
userfaultfd: open userfaultfds with O_RDONLY
sh: machvec: Use char[] for section boundaries
MIPS: SGI-IP27: Free some unused memory
MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create()
ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd()
ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE
objtool: Preserve special st_shndx indexes in elf_update_symbol
nfsd: Fix a memory leak in an error handling path
wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
leds: lm3601x: Don't use mutex after it was destroyed
wifi: mac80211: allow bw change during channel switch in mesh
bpftool: Fix a wrong type cast in btf_dumper_int
spi: mt7621: Fix an error message in mt7621_spi_probe()
x86/resctrl: Fix to restore to original value when re-enabling hardware prefetch register
Bluetooth: btusb: Fine-tune mt7663 mechanism.
Bluetooth: btusb: fix excessive stack usage
Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend
wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse()
selftests/xsk: Avoid use-after-free on ctx
spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume()
spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime()
wifi: rtl8xxxu: Fix skb misuse in TX queue selection
spi: meson-spicc: do not rely on busy flag in pow2 clk ops
bpf: btf: fix truncated last_member_type_id in btf_struct_resolve
wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration
wifi: rtl8xxxu: Remove copy-paste leftover in gen2_update_rate_mask
net: fs_enet: Fix wrong check in do_pd_setup
bpf: Ensure correct locking around vulnerable function find_vpid()
Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure
wifi: ath11k: fix number of VHT beamformee spatial streams
x86/microcode/AMD: Track patch allocation size explicitly
x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype
spi: dw: Fix PM disable depth imbalance in dw_spi_bt1_probe
spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe
i2c: mlxbf: support lock mechanism
Bluetooth: hci_core: Fix not handling link timeouts propertly
netfilter: nft_fib: Fix for rpath check with VRF devices
spi: s3c64xx: Fix large transfers with DMA
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
vhost/vsock: Use kvmalloc/kvfree for larger packets.
mISDN: fix use-after-free bugs in l1oip timer handlers
sctp: handle the error returned from sctp_auth_asoc_init_active_key
tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited
spi: Ensure that sg_table won't be used after being freed
net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks()
bnx2x: fix potential memory leak in bnx2x_tpa_stop()
net/ieee802154: reject zero-sized raw_sendmsg()
once: add DO_ONCE_SLOW() for sleepable contexts
net: mvpp2: fix mvpp2 debugfs leak
drm: bridge: adv7511: fix CEC power down control register offset
drm/bridge: Avoid uninitialized variable warning
drm/mipi-dsi: Detach devices when removing the host
drm/bridge: parade-ps8640: Fix regulator supply order
drm/dp_mst: fix drm_dp_dpcd_read return value checks
drm:pl111: Add of_node_put() when breaking out of for_each_available_child_of_node()
platform/chrome: fix double-free in chromeos_laptop_prepare()
platform/chrome: fix memory corruption in ioctl
ASoC: tas2764: Allow mono streams
ASoC: tas2764: Drop conflicting set_bias_level power setting
ASoC: tas2764: Fix mute/unmute
platform/x86: msi-laptop: Fix old-ec check for backlight registering
platform/x86: msi-laptop: Fix resource cleanup
drm: fix drm_mipi_dbi build errors
drm/bridge: megachips: Fix a null pointer dereference bug
ASoC: rsnd: Add check for rsnd_mod_power_on
ALSA: hda: beep: Simplify keep-power-at-enable behavior
drm/omap: dss: Fix refcount leak bugs
mmc: au1xmmc: Fix an error handling path in au1xmmc_probe()
ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API
drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idx
drm/msm/dp: correct 1.62G link rate at dp_catalog_ctrl_config_msa()
ASoC: da7219: Fix an error handling path in da7219_register_dai_clks()
ALSA: dmaengine: increment buffer pointer atomically
mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()
ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe
ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe
ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe
ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe
ALSA: hda/hdmi: Don't skip notification handling during PM operation
memory: pl353-smc: Fix refcount leak bug in pl353_smc_probe()
memory: of: Fix refcount leak bug in of_get_ddr_timings()
memory: of: Fix refcount leak bug in of_lpddr3_get_ddr_timings()
soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
soc: qcom: smem_state: Add refcounting for the 'state->of_node'
ARM: dts: turris-omnia: Fix mpp26 pin name and comment
ARM: dts: kirkwood: lsxl: fix serial line
ARM: dts: kirkwood: lsxl: remove first ethernet port
ia64: export memory_add_physaddr_to_nid to fix cxl build error
soc/tegra: fuse: Drop Kconfig dependency on TEGRA20_APB_DMA
ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family
ARM: Drop CMDLINE_* dependency on ATAGS
arm64: ftrace: fix module PLTs with mcount
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
iio: adc: at91-sama5d2_adc: check return status for pressure and touch
iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
iio: inkern: only release the device node when done with it
iio: ABI: Fix wrong format of differential capacitance channel ABI.
usb: ch9: Add USB 3.2 SSP attributes
usb: common: Parse for USB SSP genXxY
usb: common: add function to get interval expressed in us unit
usb: common: move function's kerneldoc next to its definition
usb: common: debug: Check non-standard control requests
clk: meson: Hold reference returned by of_get_parent()
clk: oxnas: Hold reference returned by of_get_parent()
clk: qoriq: Hold reference returned by of_get_parent()
clk: berlin: Add of_node_put() for of_get_parent()
clk: sprd: Hold reference returned by of_get_parent()
clk: tegra: Fix refcount leak in tegra210_clock_init
clk: tegra: Fix refcount leak in tegra114_clock_init
clk: tegra20: Fix refcount leak in tegra20_clock_init
HSI: omap_ssi: Fix refcount leak in ssi_probe
HSI: omap_ssi_port: Fix dma_map_sg error check
media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop
tty: xilinx_uartps: Fix the ignore_status
media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start()
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
RDMA/rxe: Fix "kernel NULL pointer dereference" error
RDMA/rxe: Fix the error caused by qp->sk
misc: ocxl: fix possible refcount leak in afu_ioctl()
fpga: prevent integer overflow in dfl_feature_ioctl_set_irq()
dmaengine: hisilicon: Disable channels when unregister hisi_dma
dmaengine: hisilicon: Fix CQ head update
dmaengine: hisilicon: Add multi-thread support for a DMA channel
dyndbg: fix static_branch manipulation
dyndbg: fix module.dyndbg handling
dyndbg: let query-modname override actual module name
dyndbg: drop EXPORTed dynamic_debug_exec_queries
mtd: devices: docg3: check the return value of devm_ioremap() in the probe
mtd: rawnand: fsl_elbc: Fix none ECC mode
RDMA/siw: Always consume all skbuf data in sk_data_ready() upcall.
ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
ata: fix ata_id_has_devslp()
ata: fix ata_id_has_ncq_autosense()
ata: fix ata_id_has_dipm()
mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
md: Replace snprintf with scnprintf
md/raid5: Ensure stripe_fill happens on non-read IO with journal
RDMA/cm: Use SLID in the work completion as the DLID in responder side
IB: Set IOVA/LENGTH on IB_MR in core/uverbs layers
xhci: Don't show warning for reinit on known broken suspend
usb: gadget: function: fix dangling pnp_string in f_printer.c
drivers: serial: jsm: fix some leaks in probe
serial: 8250: Add an empty line and remove some useless {}
serial: 8250: Toggle IER bits on only after irq has been set up
tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
phy: qualcomm: call clk_disable_unprepare in the error handling
staging: vt6655: fix some erroneous memory clean-up loops
firmware: google: Test spinlock on panic path to avoid lockups
serial: 8250: Fix restoring termios speed after suspend
scsi: libsas: Fix use-after-free bug in smp_execute_task_sg()
scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
clk: qcom: apss-ipq6018: mark apcs_alias0_core_clk as critical
fsi: core: Check error number after calling ida_simple_get
mfd: intel_soc_pmic: Fix an error handling path in intel_soc_pmic_i2c_probe()
mfd: fsl-imx25: Fix an error handling path in mx25_tsadc_setup_irq()
mfd: lp8788: Fix an error handling path in lp8788_probe()
mfd: lp8788: Fix an error handling path in lp8788_irq_init() and lp8788_irq_init()
mfd: fsl-imx25: Fix check for platform_get_irq() errors
mfd: sm501: Add check for platform_driver_register()
clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent
dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD
clk: baikal-t1: Fix invalid xGMAC PTP clock divider
clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent
clk: baikal-t1: Add SATA internal ref clock buffer
clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
clk: ast2600: BCLK comes from EPLL
mailbox: bcm-ferxrm-mailbox: Fix error check for dma_map_sg
powerpc/math_emu/efp: Include module.h
powerpc/sysdev/fsl_msi: Add missing of_node_put()
powerpc/pci_dn: Add missing of_node_put()
powerpc/powernv: add missing of_node_put() in opal_export_attrs()
x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition
powerpc/64s: Fix GENERIC_CPU build flags for PPC970 / G5
powerpc: Fix SPE Power ISA properties for e500v1 platforms
crypto: sahara - don't sleep when in softirq
crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nr
hwrng: imx-rngc - Moving IRQ handler registering after imx_rngc_irq_mask_clear()
cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
iommu/omap: Fix buffer overflow in debugfs
crypto: akcipher - default implementation for setting a private key
crypto: ccp - Release dma channels before dmaengine unrgister
crypto: inside-secure - Change swab to swab32
crypto: qat - fix use of 'dma_map_single'
crypto: qat - use pre-allocated buffers in datapath
crypto: qat - fix DMA transfer direction
iommu/iova: Fix module config properly
tracing: kprobe: Fix kprobe event gen test module on exit
tracing: kprobe: Make gen test module work in arm and riscv
kbuild: remove the target in signal traps when interrupted
kbuild: rpm-pkg: fix breakage when V=1 is used
crypto: marvell/octeontx - prevent integer overflows
crypto: cavium - prevent integer overflow loading firmware
thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id
ACPI: APEI: do not add task_work to kernel thread to avoid memory leak
f2fs: fix race condition on setting FI_NO_EXTENT flag
f2fs: fix to avoid REQ_TIME and CP_TIME collision
f2fs: fix to account FS_CP_DATA_IO correctly
selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
rcu: Back off upon fill_page_cache_func() allocation failure
rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE()
ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
MIPS: BCM47XX: Cast memcmp() of function to (void *)
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
x86/entry: Work around Clang __bdos() bug
NFSD: Return nfserr_serverfault if splice_ok but buf->pages have data
NFSD: fix use-after-free on source server when doing inter-server copy
wifi: brcmfmac: fix invalid address access when enabling SCAN log level
bpftool: Clear errno after libcap's checks
openvswitch: Fix double reporting of drops in dropwatch
openvswitch: Fix overreporting of drops in dropwatch
tcp: annotate data-race around tcp_md5sig_pool_populated
wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()
xfrm: Update ipcomp_scratches with NULL when freed
wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()
regulator: core: Prevent integer underflow
Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
can: bcm: check the result of can_send() in bcm_can_tx()
wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620
wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620
wifi: rt2x00: set VGC gain for both chains of MT7620
wifi: rt2x00: set SoC wmac clock register
wifi: rt2x00: correctly set BBP register 86 for MT7620
net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory
Bluetooth: L2CAP: Fix user-after-free
r8152: Rate limit overflow messages
drm/nouveau/nouveau_bo: fix potential memory leak in nouveau_bo_alloc()
drm: Use size_t type for len variable in drm_copy_field()
drm: Prevent drm_copy_field() to attempt copying a NULL pointer
gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init()
drm/amd/display: fix overflow on MIN_I64 definition
udmabuf: Set ubuf->sg = NULL if the creation of sg table fails
drm: bridge: dw_hdmi: only trigger hotplug event on link change
drm/vc4: vec: Fix timings for VEC modes
drm: panel-orientation-quirks: Add quirk for Anbernic Win600
platform/chrome: cros_ec: Notify the PM of wake events during resume
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
ASoC: SOF: pci: Change DMI match info to support all Chrome platforms
drm/amdgpu: fix initial connector audio value
drm/meson: explicitly remove aggregate driver at module unload time
mmc: sdhci-msm: add compatible string check for sdm670
drm/dp: Don't rewrite link config when setting phy test pattern
drm/amd/display: Remove interface for periodic interrupt 1
ARM: dts: imx7d-sdb: config the max pressure for tsc2046
ARM: dts: imx6q: add missing properties for sram
ARM: dts: imx6dl: add missing properties for sram
ARM: dts: imx6qp: add missing properties for sram
ARM: dts: imx6sl: add missing properties for sram
ARM: dts: imx6sll: add missing properties for sram
ARM: dts: imx6sx: add missing properties for sram
kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT
arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply
btrfs: scrub: try to fix super block errors
clk: zynqmp: Fix stack-out-of-bounds in strncpy`
media: cx88: Fix a null-ptr-deref bug in buffer_prepare()
clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate
usb: host: xhci-plat: suspend and resume clocks
usb: host: xhci-plat: suspend/resume clks for brcm
scsi: 3w-9xxx: Avoid disabling device if failing to enable it
nbd: Fix hung when signal interrupts nbd_start_device_ioctl()
power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()
staging: vt6655: fix potential memory leak
blk-throttle: prevent overflow while calculating wait time
ata: libahci_platform: Sanity check the DT child nodes number
bcache: fix set_at_max_writeback_rate() for multiple attached devices
soundwire: cadence: Don't overwrite msg->buf during write commands
soundwire: intel: fix error handling on dai registration issues
HID: roccat: Fix use-after-free in roccat_read()
md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d
usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
usb: musb: Fix musb_gadget.c rxstate overflow bug
Revert "usb: storage: Add quirk for Samsung Fit flash"
staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv()
nvme: copy firmware_rev on each init
nvmet-tcp: add bounds check on Transfer Tag
usb: idmouse: fix an uninit-value in idmouse_open
clk: bcm2835: Make peripheral PLLC critical
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
arm64: topology: fix possible overflow in amu_fie_setup()
io_uring: correct pinned_vm accounting
io_uring/af_unix: defer registered files gc to io_uring release
mm: hugetlb: fix UAF in hugetlb_handle_userfault
net: ieee802154: return -EINVAL for unknown addr type
Revert "net/ieee802154: reject zero-sized raw_sendmsg()"
net/ieee802154: don't warn zero-sized raw_sendmsg()
Revert "drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega"
Revert "drm/amdgpu: use dirty framebuffer helper"
ext4: continue to expand file system when the target size doesn't reach
inet: fully convert sk->sk_rx_dst to RCU rules
thermal: intel_powerclamp: Use first online CPU as control_cpu
f2fs: fix wrong condition to trigger background checkpoint correctly
gcov: support GCC 12.1 and newer compilers
Revert "drm/amdgpu: make sure to init common IP before gmc"
Linux 5.10.150
Change-Id: I54f32f1f0149ec614c8bc7944e15adb5d80cd51a
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 977ef30a7d upstream.
Starting with GCC 12.1, the created .gcda format can't be read by gcov
tool. There are 2 significant changes to the .gcda file format that
need to be supported:
a) [gcov: Use system IO buffering]
(23eb66d1d46a34cb28c4acbdf8a1deb80a7c5a05) changed that all sizes in
the format are in bytes and not in words (4B)
b) [gcov: make profile merging smarter]
(72e0c742bd01f8e7e6dcca64042b9ad7e75979de) add a new checksum to the
file header.
Tested with GCC 7.5, 10.4, 12.2 and the current master.
Link: https://lkml.kernel.org/r/624bda92-f307-30e9-9aaa-8cc678b2dfb2@suse.cz
Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd6d697a6e upstream.
In f2fs_balance_fs_bg(), it needs to check both NAT_ENTRIES and INO_ENTRIES
memory usage to decide whether we should skip background checkpoint, otherwise
we may always skip checking INO_ENTRIES memory usage, so that INO_ENTRIES may
potentially cause high memory footprint.
Fixes: 493720a485 ("f2fs: fix to avoid REQ_TIME and CP_TIME collision")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bb7f6c278 upstream.
Commit 68b99e94a4 ("thermal: intel_powerclamp: Use get_cpu() instead
of smp_processor_id() to avoid crash") fixed an issue related to using
smp_processor_id() in preemptible context by replacing it with a pair
of get_cpu()/put_cpu(), but what is needed there really is any online
CPU and not necessarily the one currently running the code. Arguably,
getting the one that's running the code in there is confusing.
For this reason, simply give the control CPU role to the first online
one which automatically will be CPU0 if it is online, so one check
can be dropped from the code for an added benefit.
Link: https://lore.kernel.org/linux-pm/20221011113646.GA12080@duo.ucw.cz/
Fixes: 68b99e94a4 ("thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df3cb754d1 upstream.
When expanding a file system from (16TiB-2MiB) to 18TiB, the operation
exits early which leads to result inconsistency between resize2fs and
Ext4 kernel driver.
=== before ===
○ → resize2fs /dev/mapper/thin
resize2fs 1.45.5 (07-Jan-2020)
Filesystem at /dev/mapper/thin is mounted on /mnt/test; on-line resizing required
old_desc_blocks = 2048, new_desc_blocks = 2304
The filesystem on /dev/mapper/thin is now 4831837696 (4k) blocks long.
[ 865.186308] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 912.091502] dm-4: detected capacity change from 34359738368 to 38654705664
[ 970.030550] dm-5: detected capacity change from 34359734272 to 38654701568
[ 1000.012751] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 1000.012878] EXT4-fs (dm-5): resized filesystem to 4294967296
=== after ===
[ 129.104898] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 143.773630] dm-4: detected capacity change from 34359738368 to 38654705664
[ 198.203246] dm-5: detected capacity change from 34359734272 to 38654701568
[ 207.918603] EXT4-fs (dm-5): resizing filesystem from 4294966784 to 4831837696 blocks
[ 207.918754] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[ 207.918758] EXT4-fs (dm-5): Converting file system to meta_bg
[ 207.918790] EXT4-fs (dm-5): resizing filesystem from 4294967296 to 4831837696 blocks
[ 221.454050] EXT4-fs (dm-5): resized to 4658298880 blocks
[ 227.634613] EXT4-fs (dm-5): resized filesystem to 4831837696
Signed-off-by: Jerry Lee <jerrylee@qnap.com>
Link: https://lore.kernel.org/r/PU1PR04MB22635E739BD21150DC182AC6A18C9@PU1PR04MB2263.apcprd04.prod.outlook.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 867b2b2b68 which is
commit 66f99628eb upstream.
With this commit, dmesg fills up with the following messages and drm
initialization takes a very long time. This commit has bee reverted
from 5.4
[drm] Fence fallback timer expired on ring sdma0
[drm] Fence fallback timer expired on ring gfx
[drm] Fence fallback timer expired on ring sdma0
[drm] Fence fallback timer expired on ring gfx
[drm] Fence fallback timer expired on ring sdma0
[drm] Fence fallback timer expired on ring sdma0
[drm] Fence fallback timer expired on ring sdma0
[drm] Fence fallback timer expired on ring gfx
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 9f55f36f74 which is
commit e3163bc8ff upstream.
This commit causes repeated WARN_ONs from
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amd
gpu_dm.c:7391 amdgpu_dm_atomic_commit_tail+0x23b9/0x2430 [amdgpu]
dmesg fills up with the following messages and drm initialization takes
a very long time.
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30393181fd upstream.
This patch adds handling to return -EINVAL for an unknown addr type. The
current behaviour is to return 0 as successful but the size of an
unknown addr type is not defined and should return an error like -EINVAL.
Fixes: 94160108a7 ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ upstream commit 0091bfc817 ]
Instead of putting io_uring's registered files in unix_gc() we want it
to be done by io_uring itself. The trick here is to consider io_uring
registered files for cycle detection but not actually putting them down.
Because io_uring can't register other ring instances, this will remove
all refs to the ring file triggering the ->release path and clean up
with io_ring_ctx_free().
Cc: stable@vger.kernel.org
Fixes: 6b06314c47 ("io_uring: add file set registration")
Reported-and-tested-by: David Bouman <dbouman03@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[axboe: add kerneldoc comment to skb, fold in skb leak fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4955c0ad7 upstream.
cpufreq_get_hw_max_freq() returns max frequency in kHz as *unsigned int*,
while freq_inv_set_max_ratio() gets passed this frequency in Hz as 'u64'.
Multiplying max frequency by 1000 can potentially result in overflow --
multiplying by 1000ULL instead should avoid that...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Fixes: cd0ed03a89 ("arm64: use activity monitors for frequency invariance")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/01493d64-2bce-d968-86dc-11a122a9c07d@omp.ru
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6c5422851d ]
When testing for a series affecting the VEC, it was discovered that
turning off and on the VEC clock is crashing the system.
It turns out that, when disabling the VEC clock, it's the only child of
the PLLC-per clock which will also get disabled. The source of the crash
is PLLC-per being disabled.
It's likely that some other device might not take a clock reference that
it actually needs, but it's unclear which at this point. Let's make
PLLC-per critical so that we don't have that crash.
Reported-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220926084509.12233-1-maxime@cerno.tech
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6a545ffa2 ]
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(),
add a bounds check to avoid out-of-bounds access.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8eb6c1ba4 ]
The firmware revision can change on after a reset so copy the most
recent info each time instead of just the first time, otherwise the
sysfs firmware_rev entry may contain stale data.
Reported-by: Jeff Lien <jeff.lien@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 708056fba7 ]
In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated
in failure, then `pcmdpriv->cmd_allocated_buf` will be not properly
released. Besides, considering there are only two error paths and the
first one can directly return, so we do not need implicitly jump to the
`exit` tag to execute the error handler.
So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error
path to release the resource and simplified the return logic of
rtw_init_cmd_priv(). As there is no proper device to test with, no runtime
testing was performed.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_2B7931B79BA38E22205C5A09EFDF11E48805@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad5dbfc123 ]
This reverts commit 86d92f5465,
which fix the timeout issue for "Samsung Fit Flash".
But the commit affects not only "Samsung Fit Flash" but also other usb
storages that use the same controller and causes severe performance
regression.
# hdparm -t /dev/sda (without the quirk)
Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec
# hdparm -t /dev/sda (with the quirk)
Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/sec
The commit author mentioned that "Issue was reproduced after device has
bad block", so this quirk should be applied when we have the timeout
issue with a device that has bad blocks.
We revert the commit so that we apply this quirk by adding kernel
paramters using a bootloader or other ways when we really need it,
without the performance regression with devices that don't have the
issue.
Signed-off-by: sunghwan jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20220913114913.3073-1-onenowy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eea4c860c3 ]
The usb function device call musb_gadget_queue() adds the passed
request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz)
and (is_buffer_mapped(req) return false),the rxstate() will copy all data
in fifo to request->buf which may cause request->buf out of bounds.
Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);
Signed-off-by: Robin Guo <guoweibin@inspur.com>
Link: https://lore.kernel.org/r/20220906102119.1b071d07a8391ff115e6d1ef@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e2cf333b7 ]
A complicated deadlock exists when using the journal and an elevated
group_thrtead_cnt. It was found with loop devices, but its not clear
whether it can be seen with real disks. The deadlock can occur simply
by writing data with an fio script.
When the deadlock occurs, multiple threads will hang in different ways:
1) The group threads will hang in the blk-wbt code with bios waiting to
be submitted to the block layer:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
ops_run_io+0x46b/0x1a30
handle_stripe+0xcd3/0x36b0
handle_active_stripes.constprop.0+0x6f6/0xa60
raid5_do_work+0x177/0x330
Or:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
flush_deferred_bios+0x136/0x170
raid5_do_work+0x262/0x330
2) The r5l_reclaim thread will hang in the same way, submitting a
bio to the block layer:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
submit_bio+0x3f/0xf0
md_super_write+0x12f/0x1b0
md_update_sb.part.0+0x7c6/0xff0
md_update_sb+0x30/0x60
r5l_do_reclaim+0x4f9/0x5e0
r5l_reclaim_thread+0x69/0x30b
However, before hanging, the MD_SB_CHANGE_PENDING flag will be
set for sb_flags in r5l_write_super_and_discard_space(). This
flag will never be cleared because the submit_bio() call never
returns.
3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe()
will do no processing on any pending stripes and re-set
STRIPE_HANDLE. This will cause the raid5d thread to enter an
infinite loop, constantly trying to handle the same stripes
stuck in the queue.
The raid5d thread has a blk_plug that holds a number of bios
that are also stuck waiting seeing the thread is in a loop
that never schedules. These bios have been accounted for by
blk-wbt thus preventing the other threads above from
continuing when they try to submit bios. --Deadlock.
To fix this, add the same wait_event() that is used in raid5_do_work()
to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will
schedule and wait until the flag is cleared. The schedule action will
flush the plug which will allow the r5l_reclaim thread to continue,
thus preventing the deadlock.
However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING
from the same thread and can thus deadlock if the thread is put to
sleep. So avoid waiting if md_check_recovery() is being called in the
loop.
It's not clear when the deadlock was introduced, but the similar
wait_event() call in raid5_do_work() was added in 2017 by this
commit:
16d997b78b ("md/raid5: simplfy delaying of writes while metadata
is updated.")
Link: https://lore.kernel.org/r/7f3b87b6-b52a-f737-51d7-a4eec5c44112@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cacdb14b1c ]
roccat_report_event() is responsible for registering
roccat-related reports in struct roccat_device.
int roccat_report_event(int minor, u8 const *data)
{
struct roccat_device *device;
struct roccat_reader *reader;
struct roccat_report *report;
uint8_t *new_value;
device = devices[minor];
new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
if (!new_value)
return -ENOMEM;
report = &device->cbuf[device->cbuf_end];
/* passing NULL is safe */
kfree(report->value);
...
The registered report is stored in the struct roccat_device member
"struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value,
kfree() the saved report from cbuf[0] and allocates a new reprot.
Since there is no lock when this kfree() is performed,
kfree() can be performed even while reading the saved report.
static ssize_t roccat_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct roccat_reader *reader = file->private_data;
struct roccat_device *device = reader->device;
struct roccat_report *report;
ssize_t retval = 0, len;
DECLARE_WAITQUEUE(wait, current);
mutex_lock(&device->cbuf_lock);
...
report = &device->cbuf[reader->cbuf_start];
/*
* If report is larger than requested amount of data, rest of report
* is lost!
*/
len = device->report_size > count ? count : device->report_size;
if (copy_to_user(buffer, report->value, len)) {
retval = -EFAULT;
goto exit_unlock;
}
...
The roccat_read() function receives the device->cbuf report and
delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of
the Nth report->value is in progress, the pointer that copy_to_user()
is working on is kfree()ed and UAF read may occur. (race condition)
Since the device node of this driver does not set separate permissions,
this is not a security vulnerability, but because it is used for
requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or
There is a possibility to use it by giving.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2d05b8803 ]
Inside set_at_max_writeback_rate() the calculation in following if()
check is wrong,
if (atomic_inc_return(&c->idle_counter) <
atomic_read(&c->attached_dev_nr) * 6)
Because each attached backing device has its own writeback thread
running and increasing c->idle_counter, the counter increates much
faster than expected. The correct calculation should be,
(counter / dev_nr) < dev_nr * 6
which equals to,
counter < dev_nr * dev_nr * 6
This patch fixes the above mistake with correct calculation, and helper
routine idle_counter_exceeded() is added to make code be more clear.
Reported-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Link: https://lore.kernel.org/r/20220919161647.81238-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c132ea650 ]
Having greater than AHCI_MAX_PORTS (32) ports detected isn't that critical
from the further AHCI-platform initialization point of view since
exceeding the ports upper limit will cause allocating more resources than
will be used afterwards. But detecting too many child DT-nodes doesn't
seem right since it's very unlikely to have it on an ordinary platform. In
accordance with the AHCI specification there can't be more than 32 ports
implemented at least due to having the CAP.NP field of 5 bits wide and the
PI register of dword size. Thus if such situation is found the DTB must
have been corrupted and the data read from it shouldn't be reliable. Let's
consider that as an erroneous situation and halt further resources
allocation.
Note it's logically more correct to have the nports set only after the
initialization value is checked for being sane. So while at it let's make
sure nports is assigned with a correct value.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d47e01b9d ]
ADP5061_CHG_STATUS_1_CHG_STATUS is masked with 0x07, which means a length
of 8, but adp5061_chg_type array size is 4, may end up reading 4 elements
beyond the end of the adp5061_chg_type[] array.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1de7c3cf48 ]
syzbot reported hung task [1]. The following program is a simplified
version of the reproducer:
int main(void)
{
int sv[2], fd;
if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
return 1;
if ((fd = open("/dev/nbd0", 0)) < 0)
return 1;
if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
return 1;
if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
return 1;
if (ioctl(fd, NBD_DO_IT) < 0)
return 1;
return 0;
}
When signal interrupt nbd_start_device_ioctl() waiting the condition
atomic_read(&config->recv_threads) == 0, the task can hung because it
waits the completion of the inflight IOs.
This patch fixes the issue by clearing queue, not just shutdown, when
signal interrupt nbd_start_device_ioctl().
Link: https://syzkaller.appspot.com/bug?id=7d89a3ffacd2b83fdd39549bc4d8e0a89ef21239 [1]
Reported-by: syzbot+38e6c55d4969a14c1534@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220907163502.577561-1-syoshida@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30eaf02149 ]
The function zynqmp_pll_round_rate is used to find a most appropriate
PLL frequency which the hardware can generate according to the desired
frequency. For example, if the desired frequency is 297MHz, considering
the limited range from PS_PLL_VCO_MIN (1.5GHz) to PS_PLL_VCO_MAX (3.0GHz)
of PLL, zynqmp_pll_round_rate should return 1.872GHz (297MHz * 5).
There are two problems with the current code of zynqmp_pll_round_rate:
1) When the rate is below PS_PLL_VCO_MIN, it can't find a correct rate
when the parameter "rate" is an integer multiple of *prate, in other words,
if "f" is zero, zynqmp_pll_round_rate won't return a valid frequency which
is from PS_PLL_VCO_MIN to PS_PLL_VCO_MAX. For example, *prate is 33MHz
and the rate is 660MHz, zynqmp_pll_round_rate will not boost up rate and
just return 660MHz, and this will cause clk_calc_new_rates failure since
zynqmp_pll_round_rate returns an invalid rate out of its boundaries.
2) Even if the rate is higher than PS_PLL_VCO_MIN, there is still a risk
that zynqmp_pll_round_rate returns an invalid rate because the function
DIV_ROUND_CLOSEST makes some loss in the fractional part. If the parent
clock *prate is 33333333Hz and we want to set the PLL rate to 1.5GHz,
this function will return 1499999985Hz by using the formula below:
value = *prate * DIV_ROUND_CLOSEST(rate, *prate)).
This value is also invalid since it's slightly smaller than PS_PLL_VCO_MIN.
because DIV_ROUND_CLOSEST makes some loss in the fractional part.
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20220826142030.213805-1-quanyang.wang@windriver.com
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b064d9144 ]
When the driver calls cx88_risc_buffer() to prepare the buffer, the
function call may fail, resulting in a empty buffer and null-ptr-deref
later in buffer_queue().
The following log can reveal it:
[ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
[ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500
[ 41.836311] Call Trace:
[ 41.836945] __enqueue_in_driver+0x141/0x360
[ 41.837262] vb2_start_streaming+0x62/0x4a0
[ 41.838216] vb2_core_streamon+0x1da/0x2c0
[ 41.838516] __vb2_init_fileio+0x981/0xbc0
[ 41.839141] __vb2_perform_fileio+0xbf9/0x1120
[ 41.840072] vb2_fop_read+0x20e/0x400
[ 41.840346] v4l2_read+0x215/0x290
[ 41.840603] vfs_read+0x162/0x4c0
Fix this by checking the return value of cx88_risc_buffer()
[hverkuil: fix coding style issues]
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9eab5f0bb ]
[BUG]
The following script shows that, although scrub can detect super block
errors, it never tries to fix it:
mkfs.btrfs -f -d raid1 -m raid1 $dev1 $dev2
xfs_io -c "pwrite 67108864 4k" $dev2
mount $dev1 $mnt
btrfs scrub start -B $dev2
btrfs scrub start -Br $dev2
umount $mnt
The first scrub reports the super error correctly:
scrub done for f3289218-abd3-41ac-a630-202f766c0859
Scrub started: Tue Aug 2 14:44:11 2022
Status: finished
Duration: 0:00:00
Total to scrub: 1.26GiB
Rate: 0.00B/s
Error summary: super=1
Corrected: 0
Uncorrectable: 0
Unverified: 0
But the second read-only scrub still reports the same super error:
Scrub started: Tue Aug 2 14:44:11 2022
Status: finished
Duration: 0:00:00
Total to scrub: 1.26GiB
Rate: 0.00B/s
Error summary: super=1
Corrected: 0
Uncorrectable: 0
Unverified: 0
[CAUSE]
The comments already shows that super block can be easily fixed by
committing a transaction:
/*
* If we find an error in a super block, we just report it.
* They will get written with the next transaction commit
* anyway
*/
But the truth is, such assumption is not always true, and since scrub
should try to repair every error it found (except for read-only scrub),
we should really actively commit a transaction to fix this.
[FIX]
Just commit a transaction if we found any super block errors, after
everything else is done.
We cannot do this just after scrub_supers(), as
btrfs_commit_transaction() will try to pause and wait for the running
scrub, thus we can not call it with scrub_lock hold.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6effe295e1 ]
This allows the userspace to notice that there's not enough
current provided to charge the battery, and also fixes issues
with 0% SOC values being considered invalid.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c152c2f66 ]
When arm64 signal context data overflows the base struct sigcontext it gets
placed in an extra buffer pointed to by a record of type EXTRA_CONTEXT in
the base struct sigcontext which is required to be the last record in the
base struct sigframe. The current validation code attempts to check this
by using GET_RESV_NEXT_HEAD() to step forward from the current record to
the next but that is a macro which assumes it is being provided with a
struct _aarch64_ctx and uses the size there to skip forward to the next
record. Instead validate_extra_context() passes it a struct extra_context
which has a separate size field. This compiles but results in us trying
to validate a termination record in completely the wrong place, at best
failing validation and at worst just segfaulting. Fix this by passing
the struct _aarch64_ctx we meant to into the macro.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829160703.874492-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 415432c008 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7492a83ed9 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60c9213a1d ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman