* android12-5.10: (1647 commits)
FROMGIT: mm/page_owner: record the timestamp of all pages during free
UPSTREAM: mm/page_io: use pr_alert_ratelimited for swap read/write errors
ANDROID: roll back xt_IDLETIMER to 5.10.21 upstream/vanilla version
ANDROID: qcom: Add ip, rtnl and free related symbols
FROMGIT: power: supply: Fix build error when CONFIG_POWER_SUPPLY is not enabled.
FROMGIT: usb: dwc3: gadget: modify the scale in vbus_draw callback
BACKPORT: FROMLIST: usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable
FROMLIST: Makefile: fix GDB warning with CONFIG_RELR
ANDROID: refresh ABI XML before enabling KMI enforcement
Revert "Revert "ANDROID: GKI: Enable bounds sanitizer""
Revert "ANDROID: Revert "f2fs: fix to tag FIEMAP_EXTENT_MERGED in f2fs_fiemap()""
ANDROID: Enforce KMI stability
ANDROID: enable options prior to enforcing KMI
Revert "ANDROID: GKI: temporarily disable LTO/CFI"
ANDROID: gki_defconfig: Enable NET_CLS_{BASIC,TCINDEX,MATCHALL} & NET_ACT_{GACT,MIRRED}
FROMLIST: selftests: Add a MREMAP_DONTUNMAP selftest for shmem
FROMLIST: mm: Extend MREMAP_DONTUNMAP to non-anonymous mappings
ANDROID: GKI: enable CONFIG_CMA_SYSFS
ANDROID: make cma_sysfs experimental
FROMLIST: mm: cma: support sysfs
...
Change-Id: I6145eddeb253bea33164fc909e7790d30f17ef1f
This adds the necessary data for handling efuse on the rk3568.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Change-Id: Ia74d77b68a6303223eaccdc08e882851a917f50f
The oem zone ranges from 256 to 511 bytes. userspace
can read/write the raw NVMEM file located at
/sys/bus/nvmem/devices/rockchip-otp0/nvmem
The rest of otp which ranging from 0 to 255 bytes is
used for system, it is protected by hardware, any writes
to this range will be ignored and not take effect.
e.g.
/#hexdump -C /sys/bus/nvmem/devices/rockchip-otp0/nvmem
00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
00000100 ff ff ff ff ff ff ff ff 0f 0f 0f 0f 0f 0f 0f 0f
00000110 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
00000120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
00000200
Change-Id: I3e222d87525887fd5a38aa724e97f2dd163345aa
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
This adds the necessary data for handling efuse on the rv1126.
Change-Id: Id46ae2354674482ca1e2d69888acce3028f0f902
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Add clocks and reg_read to rockchip_data, allow support more SoCs.
Change-Id: I45271d69dae808d741c953ce61b921b9a3d21202
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
This patch adds support to calculate the static power in milliwatts
consumed by devices.
Change-Id: Ied4ba5adecea45ff34b372a6e23c70882000aef3
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
PX30_GRF_SOC_CON5 is intended for postponing the auto switch
of pinmux from SDMMC to JTAG after removing the SD cards.
However, the default value is too small to meet the actual
requirement. Increase this value to 5 seconds currently.
Change-Id: I18fafe07822b81d9cd448ab71c1f0e49a75db357
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Set system_serial_low/high from eFuse ID.
Serial can read from /proc/cpuinfo.
Change-Id: If412fc5a89a5e5092b510452fc5a126fdd374ac2
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
The note /dev/vendor_storage include api to update loader,
this node must config root user access only, but some
project set this node`s owner as bluetooth ,it is a high
risk that the loader data will be corrupted.
Disable this api by default.
Change-Id: I6beb1b3cf51bffebd0ae05368d8c266439a61f91
Signed-off-by: Yifeng Zhao <zyf@rock-chips.com>
This patch is used to support vendor storage for SPI NAND
and SLC NAND via mtd interface.
Change-Id: I6f011cb9052a014845629e103976b36adb5fa589
Signed-off-by: Yifeng Zhao <zyf@rock-chips.com>
+CONFIG_ROCKCHIP_VENDOR_STORAGE=y
+CONFIG_ROCKCHIP_MMC_VENDOR_STORAGE=y
default y on 4.19.
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: I0cc09457466f65485e705ce539cf48e02473468f
.set_ios() is called from .resume() as well. For SDIO device which sets
keep-power-in-suspend, nothing should be changed after resuming, as well
as sample tuning value, since this value is tuned already. So we should
not overwrite it with the default value.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Change-Id: I18974f28d7a2253fd151817a5a3e4105c2e976b3
This reverts part of commit 251c226c35 ("rk: revert to v4.19").
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: Ie2742038ee35cb4ff89ba3abc6a2e8f900461e6f
Fix the following warnings:
arch/arm64/boot/dts/rockchip/rk3566-evb2-lp4x-v10-eink.dts:274.18-285.4:
ERROR (i2c_bus_reg): /i2c@fe5c0000/wacom@09: I2C bus unit address format error, expected "9"
arch/arm64/boot/dts/rockchip/rk3566-rk817-eink.dts:551.18-562.4:
ERROR (i2c_bus_reg): /i2c@fe5b0000/wacom@09: I2C bus unit address format error, expected "9"
arch/arm64/boot/dts/rockchip/rk3566-rk817-eink.dts:678.17-690.4:
ERROR (i2c_bus_reg): /i2c@fe5e0000/kxtj3@0e: I2C bus unit address format error, expected "e"
arch/arm64/boot/dts/rockchip/rk3566-rk817-eink-w103.dts:698.18-710.4:
ERROR (i2c_bus_reg): /i2c@fe5a0000/wacom@09: I2C bus unit address format error, expected "9"
Signed-off-by: Tao Huang <huangtao@rock-chips.com>
Change-Id: Ia116424ecbb3285d77274ef19b6b93ef5f0f1480
Fixes: 1d1a1f03f3 ("mmc: dw_mmc: add xfer timer for avoid DTO without actual data payload")
Signed-off-by: Wu Liangqing <wlq@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Change-Id: I00ae095cff35b3960e1f9189d03f9908fed0aa33
supports-* stuff were used for rockchip platforms to speed up booting
if we know what exactly the host was used for. As we have upstreamed all
these with some very similar ways, now it's the time we migrate our dts
files to use new properties.
They were converted by:
sed -i "s/supports-emmc;/no-sdio;\n\tno-sd;/g" `grep supports-emmc -rl arch/*`
sed -i "s/supports-sd;/no-sdio;\n\tno-mmc;/g" `grep supports-sd -rl arch/*`
sed -i "s/supports-sdio;/no-sd;\n\tno-mmc;/g" `grep supports-sdio -rl arch/*`
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Change-Id: I33e5317ee5c7305803cf18ff4a370658abf555b0
