[ Upstream commit 4bb1eb3cd4 ]
After commit 7cdf8446ed ("arm64: dts: actions: Add pinctrl node for
Actions Semi S700") following error has been observed while booting
Linux on Cubieboard7-lite(based on S700 SoC).
[ 0.257415] pinctrl-s700 e01b0000.pinctrl: can't request region for
resource [mem 0xe01b0000-0xe01b0fff]
[ 0.266902] pinctrl-s700: probe of e01b0000.pinctrl failed with error -16
This is due to the fact that memory range for "sps" power domain controller
clashes with pinctrl.
One way to fix it, is to limit pinctrl address range which is safe
to do as current pinctrl driver uses address range only up to 0x100.
This commit limits the pinctrl address range to 0x100 so that it doesn't
conflict with sps range.
Fixes: 7cdf8446ed ("arm64: dts: actions: Add pinctrl node for Actions
Semi S700")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 027cca9eb5 ]
The mdss node sets #interrupt-cells = <1>, so its interrupts
should be referenced using a single cell (in this case: only the
interrupt number).
However, right now the mdp/dsi node both have two interrupt cells
set, e.g. interrupts = <4 0>. The 0 is probably meant to say
IRQ_TYPE_NONE (= 0), but with #interrupt-cells = <1> this is
actually interpreted as a second interrupt line.
Remove the IRQ flags from both interrupts to fix this.
Fixes: 305410ffd1 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-5-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2f0cbb57d ]
Tha parent node of "wcd_codec" specifies #address-cells = <1>
and #size-cells = <0>, which means that each resource should be
described by one cell for the address and size omitted.
However, wcd_codec currently lists 0x200 as second cell (probably
the size of the resource). When parsing this would be treated like
another memory resource - which is entirely wrong.
To quote the device tree specification [1]:
"If the parent node specifies a value of 0 for #size-cells,
the length field in the value of reg shall be omitted."
[1]: https://www.devicetree.org/specifications/
Fixes: 5582fcb382 ("arm64: dts: apq8016-sbc: add analog audio support with multicodec")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-4-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6859ae860 ]
Commit fe2aff0c57 ("arm64: dts: qcom: msm8916: remove unit name for thermal trip points")
removed the unit names for most of the thermal trip points defined
in msm8916.dtsi, but missed to update the one for cpu0_1-thermal.
So why wasn't this spotted by "make dtbs_check"? Apparently, the name
of the thermal zone is already invalid: thermal-zones.yaml specifies
a regex of ^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$, so it is not allowed
to contain underscores. Therefore the thermal zone was never verified
using the DTB schema.
After replacing the underscore in the thermal zone name, the warning
shows up:
apq8016-sbc.dt.yaml: thermal-zones: cpu0-1-thermal:trips: 'trip-point@0'
does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
Fix up the thermal zone names and remove the unit name for the trip point.
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Fixes: fe2aff0c57 ("arm64: dts: qcom: msm8916: remove unit name for thermal trip points")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-3-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 791619f668 ]
The i.MX General Power Controller v2 device node was missing interrupts
property necessary to route its interrupt to GIC. This also fixes the
dbts_check warnings like:
arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpc@303a0000:
{'compatible': ... '$nodename': ['gpc@303a0000']} is not valid under any of the given schemas
arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: gpc@303a0000: 'interrupts' is a required property
Fixes: fdbcc04da2 ("arm64: dts: imx8mq: add GPC power domains")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13d029ee51 ]
If CONFIG_OF is n, gcc fails:
drivers/memory/omap-gpmc.o: In function `gpmc_omap_onenand_set_timings':
omap-gpmc.c:(.text+0x2a88): undefined reference to `gpmc_read_settings_dt'
Add gpmc_read_settings_dt() helper function, which zero the gpmc_settings
so the caller doesn't proceed with random/invalid settings.
Fixes: a758f50f10 ("mtd: onenand: omap2: Configure driver from DT")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200827125316.20780-1-yuehaibing@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2933bf3528 ]
H5's Mali GPU PMU is not present or working corretly although
H5 datasheet record its interrupt vector.
Adding this module will miss lead lima driver try to shutdown
it and get waiting timeout. This problem is not exposed before
lima runtime PM support is added.
Fixes: bb39ed07e5 ("arm64: dts: allwinner: h5: Add device node for Mali-450 GPU")
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200822062755.534761-1-yuq825@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3658a2b7f3 ]
DCDC1 regulator powers many different subsystems. While some of them can
work at 3.0 V, some of them can not. For example, VCC-HDMI can only work
between 3.24 V and 3.36 V. According to OS images provided by the board
manufacturer this regulator should be set to 3.3 V.
Set DCDC1 and DCDC1SW to 3.3 V in order to fix this.
Fixes: da7ac948fa ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 Ultra")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200824193649.978197-1-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82ffb35c2c ]
rng DT node was added without a compatible string.
i.MX driver for RNGC (drivers/char/hw_random/imx-rngc.c) also claims
support for RNGB, and is currently used for i.MX25.
Let's use this driver also for RNGB block in i.MX6SL.
Fixes: e29fe21cff ("ARM: dts: add device tree source for imx6sl SoC")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c77761c8a5 ]
Similar to 7980d2eabd ("ipvs: clear skb->tstamp in forwarding path").
fq qdisc requires tstamp to be cleared in forwarding path.
Fixes: 8203e2d844 ("net: clear skb->tstamp in forwarding paths")
Fixes: fb420d5d91 ("tcp/fq: move back to CLOCK_MONOTONIC")
Fixes: 80b14dee2b ("net: Add a new socket option for a future transmit time.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63137bc588 ]
Fixes an error causing small packets to get dropped. skb_ensure_writable
expects the second parameter to be a length in the ethernet payload.=20
If we want to write the ethernet header (src, dst), we should pass 0.
Otherwise, packets with small payloads (< ETH_ALEN) will get dropped.
Fixes: c1a8311679 ("netfilter: bridge: convert skb_make_writable to skb_ensure_writable")
Signed-off-by: Timothée COCAULT <timothee.cocault@orange.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f25434bcc ]
If the first packet conntrack sees after a re-register is an outgoing
keepalive packet with no data (SEG.SEQ = SND.NXT-1), td_end is set to
SND.NXT-1.
When the peer correctly acknowledges SND.NXT, tcp_in_window fails
check III (Upper bound for valid (s)ack: sack <= receiver.td_end) and
returns false, which cascades into nf_conntrack_in setting
skb->_nfct = 0 and in later conntrack iptables rules not matching.
In cases where iptables are dropping packets that do not match
conntrack rules this can result in idle tcp connections to time out.
v2: adjust td_end when getting the reply rather than when sending out
the keepalive packet.
Fixes: f94e63801a ("netfilter: conntrack: reset tcp maxwin on re-register")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d48c812474 ]
When the passed token is longer than 4032 bytes, the remaining part
of the token must be copied from the rqstp->rq_arg.pages. But the
copy must make sure it happens in a consecutive way.
With the existing code, the first memcpy copies 'length' bytes from
argv->iobase, but since the header is in front, this never fills the
whole first page of in_token->pages.
The mecpy in the loop copies the following bytes, but starts writing at
the next page of in_token->pages. This leaves the last bytes of page 0
unwritten.
Symptoms were that users with many groups were not able to access NFS
exports, when using Active Directory as the KDC.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Fixes: 5866efa8cb "SUNRPC: Fix svcauth_gss_proxy_init()"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b159c63d82 ]
According to the latest RM (see Table 5-1. Clock Root Table),
both usdhc root clocks have the parent order as follows:
000 - 25M_REF_CLK
001 - SYSTEM_PLL1_DIV2
010 - SYSTEM_PLL1_CLK
011 - SYSTEM_PLL2_DIV2
100 - SYSTEM_PLL3_CLK
101 - SYSTEM_PLL1_DIV3
110 - AUDIO_PLL2_CLK
111 - SYSTEM_PLL1_DIV8
So the audio_pll2_out and sys3_pll_out have to be swapped.
Fixes: b80522040c ("clk: imx: Add clock driver for i.MX8MQ CCM")
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reported-by: Cosmin Stefan Stoica <cosmin.stoica@nxp.com>
Link: https://lore.kernel.org/r/1602753944-30757-1-git-send-email-abel.vesa@nxp.com
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e6cfd496f ]
pfn is not added to pfn_list when vfio_add_to_pfn_list fails.
vfio_unpin_page_external will exit directly without calling
vfio_iova_put_vfio_pfn. This will lead to a memory leak.
Fixes: a54eb55045 ("vfio iommu type1: Add support for mediated devices")
Signed-off-by: Xiaoyang Xu <xuxiaoyang2@huawei.com>
[aw: simplified logic, add Fixes]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 852b1beecb ]
The eventfd context is used as our irqbypass token, therefore if an
eventfd is re-used, our token is the same. The irqbypass code will
return an -EBUSY in this case, but we'll still attempt to unregister
the producer, where if that duplicate token still exists, results in
removing the wrong object. Clear the token of failed producers so
that they harmlessly fall out when unregistered.
Fixes: 6d7425f109 ("vfio: Register/unregister irq_bypass_producer")
Reported-by: guomin chen <guomin_chen@sina.com>
Tested-by: guomin chen <guomin_chen@sina.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af8c53c8bc ]
If userspace asked fsmap to try to count the number of entries, we cannot
return more than UINT_MAX entries because fmh_entries is u32.
Therefore, stop counting if we hit this limit or else we will waste time
to return truncated results.
Fixes: 0c9ec4beec ("ext4: support GETFSMAP ioctls")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20201001222148.GA49520@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c327a310ec ]
This was discovered using O_DIRECT at the client side, with small
unaligned file offsets or IOs that span multiple file pages.
Fixes: e248aa7be8 ("svcrdma: Remove max_sge check at connect time")
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdf09ab887 ]
Corentin hit the following workqueue warning when running with
CRYPTO_MANAGER_EXTRA_TESTS:
WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0
Modules linked in: ghash_generic
CPU: 2 PID: 147 Comm: modprobe Not tainted
5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty #545
Hardware name: Pine H64 model A (DT)
pc : __queue_work+0x3b8/0x3d0
Call trace:
__queue_work+0x3b8/0x3d0
queue_work_on+0x6c/0x90
do_init_module+0x188/0x1f0
load_module+0x1d00/0x22b0
I wasn't able to reproduce on x86 or rpi 3b+.
This is
WARN_ON(!list_empty(&work->entry))
from __queue_work(), and it happens because the init_free_wq work item
isn't initialized in time for a crypto test that requests the gcm
module. Some crypto tests were recently moved earlier in boot as
explained in commit c4741b2305 ("crypto: run initcalls for generic
implementations earlier"), which went into mainline less than two weeks
before the Fixes commit.
Avoid the warning by statically initializing init_free_wq and the
corresponding llist.
Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/
Fixes: 1a7b7d9220 ("modules: Use vmalloc special flag")
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-on: sun50i-h6-pine-h64
Tested-on: imx8mn-ddr4-evk
Tested-on: sun50i-a64-bananapi-m64
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b608f11d49 ]
We can get down to this return value from ERR_CAST() without
initializing hw. Set it to -ENOMEM so that we always return something
sane.
Fixes the following smatch warning:
drivers/clk/rockchip/clk-half-divider.c:228 rockchip_clk_register_halfdiv() error: uninitialized symbol 'hw'.
drivers/clk/rockchip/clk-half-divider.c:228 rockchip_clk_register_halfdiv() warn: passing zero to 'ERR_CAST'
Cc: Elaine Zhang <zhangqing@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Fixes: 956060a527 ("clk: rockchip: add support for half divider")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b39c0615d0 ]
dev_get_drvdata() is called in img_pwm_runtime_resume() before the
driver data is set.
When pm_runtime_enabled() returns false in img_pwm_probe() it calls
img_pwm_runtime_resume() which results in a null pointer access.
This patch fixes the problem by setting the driver data earlier in the
img_pwm_probe() function.
This crash was seen when booting the Imagination Technologies Creator
Ci40 (Marduk) with kernel 5.4 in OpenWrt.
Fixes: e690ae5262 ("pwm: img: Add runtime PM")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 515ecd5368 ]
While it is true that devices with is_virtfn=1 will have a Memory Space
Enable bit that is hard-wired to 0, this is not the only case where we
see this behavior -- For example some bare-metal hypervisors lack
Memory Space Enable bit emulation for devices not setting is_virtfn
(s390). Fix this by instead checking for the newly-added
no_command_memory bit which directly denotes the need for
PCI_COMMAND_MEMORY emulation in vfio.
Fixes: abafbc551f ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12856e7acd ]
For VFs, the Memory Space Enable bit in the Command Register is
hard-wired to 0.
Add a new bit to signify devices where the Command Register Memory
Space Enable bit does not control the device's response to MMIO
accesses.
Fixes: abafbc551f ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c4e80e067 ]
On Amlogic Meson G12b platform, similar to fclk_div3, the fclk_div2
seems to be necessary for the system to operate correctly as well.
Typically, the clock also gets chosen by the eMMC peripheral. This
probably masked the problem so far. However, when booting from a SD
card the clock seems to get disabled which leads to a system freeze.
Let's mark this clock as critical, fixing boot from SD card on G12b
platforms.
Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/577e0129e8ee93972d92f13187ff4e4286182f67.1598629915.git.stefan@agner.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
