[ Upstream commit 26e197b7f9240a4ac301dd0ad520c0c697c2ea7d ]
The blk_add_partition() function initially used a single if-condition
(IS_ERR(part)) to check for errors when adding a partition. This was
modified to handle the specific case of -ENXIO separately, allowing the
function to proceed without logging the error in this case. However,
this change unintentionally left a path where md_autodetect_dev()
could be called without confirming that part is a valid pointer.
This commit separates the error handling logic by splitting the
initial if-condition, improving code readability and handling specific
error scenarios explicitly. The function now distinguishes the general
error case from -ENXIO without altering the existing behavior of
md_autodetect_dev() calls.
Fixes: b72053072c (block: allow partitions on host aware zone devices)
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240911132954.5874-1-riyandhiman14@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42c306ed723321af4003b2a41bb73728cab54f85 ]
Consider the following scenario:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\-------------\ \-------------\ \--------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
If Process 1 issue a new IO and bfqq2 is found, and then bfq_init_rq()
decide to spilt bfqq2 by bfq_split_bfqq(). Howerver, procress reference
of bfqq2 is 1 and bfq_split_bfqq() just clear the coop flag, which will
break the merge chain.
Expected result: caller will allocate a new bfqq for BIC1
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
| | |
\-------------\ \--------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 1 3
Since the condition is only used for the last bfqq4 when the previous
bfqq2 and bfqq3 are already splited. Fix the problem by checking if
bfqq is the last one in the merge chain as well.
Fixes: 36eca89483 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e456dba86c7f9a19792204a044835f1ca2c8dbb ]
Consider the following merge chain:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
IO from Process 1 will get bfqf2 from BIC1 first, then
bfq_setup_cooperator() will found bfqq2 already merged to bfqq3 and then
handle this IO from bfqq3. However, the merge chain can be much deeper
and bfqq3 can be merged to other bfqq as well.
Fix this problem by iterating to the last bfqq in
bfq_setup_cooperator().
Fixes: 36eca89483 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9ea57c91f03bcad415e1a20113bdb2077bcf990 ]
If request timetout is handled by nbd_requeue_cmd(), normal completion
has to be stopped for avoiding to complete this requeued request, other
use-after-free can be triggered.
Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime
make sure that cmd->lock is grabbed for clearing the flag and the
requeue.
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Fixes: 2895f1831e ("nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240830034145.1827742-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99655a304e450baaae6b396cb942b9e47659d644 ]
Clang static checker (scan-build) warning:
net/tipc/bcast.c:305:4:
The expression is an uninitialized value. The computed value will also
be garbage [core.uninitialized.Assign]
305 | (*cong_link_cnt)++;
| ^~~~~~~~~~~~~~~~~~
tipc_rcast_xmit() will increase cong_link_cnt's value, but cong_link_cnt
is uninitialized. Although it won't really cause a problem, it's better
to fix it.
Fixes: dca4a17d24 ("tipc: fix potential hanging after b/rcast changing")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://patch.msgid.link/20240912110119.2025503-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9c7ac4fe22c608acf6153a3329df2b6b6cd416c ]
En-Wei reported that traffic breaks if cable is unplugged for more
than 3s and then re-plugged. This was supposed to be fixed by
621735f59064 ("r8169: fix rare issue with broken rx after link-down on
RTL8125"). But apparently this didn't fix the issue for everybody.
The 3s threshold rang a bell, as this is the delay after which ALDPS
kicks in. And indeed disabling ALDPS fixes the issue for this user.
Maybe this fixes the issue in general. In a follow-up step we could
remove the first fix attempt and see whether anybody complains.
Fixes: f1bce4ad2f ("r8169: add support for RTL8125")
Tested-by: En-Wei WU <en-wei.wu@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/778b9d86-05c4-4856-be59-cde4487b9e52@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fa29c85117170b0508790f878b13ec6593c888 ]
Bareudp reads the inner IP header to get the ECN value. Therefore, it
needs to ensure that it's part of the skb's linear data.
This is similar to the vxlan and geneve fixes for that same problem:
* commit f7789419137b ("vxlan: Pull inner IP header in vxlan_rcv().")
* commit 1ca1ba465e55 ("geneve: make sure to pull inner header in
geneve_rx()")
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/5205940067c40218a70fbb888080466b2fc288db.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ]
Requesting transfers of the exact same size of wMaxPacketSize may result
in ZPL/short-transfer since the USB stack cannot handle it as we are
limiting the buffer size to be the same as wMaxPacketSize.
Also, in terms of throughput this change has the same effect to
interrupt endpoint as 290ba20081 "Bluetooth: Improve USB driver throughput
by increasing the frame size" had for the bulk endpoint, so users of the
advertisement bearer (e.g. BT Mesh) may benefit from this change.
Fixes: 5e23b923da ("[Bluetooth] Add generic driver for Bluetooth USB devices")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c09b50efcad985cf920ca88baa9aa52b1999dcc ]
After calling m_can_stop() an interrupt may be pending or NAPI might
still be executed. This means the driver might still touch registers
of the IP core after the clocks have been disabled. This is not good
practice and might lead to aborts depending on the SoC integration.
To avoid these potential problems, make m_can_close() symmetric to
m_can_open(), i.e. stop the clocks at the end, right before shutting
down the transceiver.
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-2-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 801ad2f87b0c6d0c34a75a4efd6bfd3a2d9f9298 ]
If an interrupt (RX-complete or error flag) is set when bringing up
the CAN device, e.g. due to CAN bus traffic before initializing the
device, when m_can_start() is called and interrupts are enabled,
m_can_isr() is called immediately, which disables all CAN interrupts
and calls napi_schedule().
Because napi_enable() isn't called until later in m_can_open(), the
call to napi_schedule() never schedules the m_can_poll() callback and
the device is left with interrupts disabled and can't receive any CAN
packets until rebooted.
This can be verified by running "cansend" from another device before
setting the bitrate and calling "ip link set up can0" on the test
device. Adding debug lines to m_can_isr() shows it's called with flags
(IR_EP | IR_EW | IR_CRCE), which calls m_can_disable_all_interrupts()
and napi_schedule(), and then m_can_poll() is never called.
Move the call to napi_enable() above the call to m_can_start() to
enable any initial interrupt flags to be handled by m_can_poll() so
that interrupts are reenabled. Add a call to napi_disable() in the
error handling section of m_can_open(), to handle the case where later
functions return errors.
Also, in m_can_close(), move the call to napi_disable() below the call
to m_can_stop() to ensure all interrupts are handled when bringing
down the device. This race condition is much less likely to occur.
Tested on a Microchip SAMA7G54 MPU. The fix should be applicable to
any SoC with a Bosch M_CAN controller.
Signed-off-by: Jake Hamby <Jake.Hamby@Teledyne.com>
Fixes: e0d1f4816f ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-1-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfbfeee61582e638770a1a10deef866c9adb38f5 ]
This ignores errors from HCI_OP_REMOTE_NAME_REQ_CANCEL since it
shouldn't interfere with the stopping of discovery and in certain
conditions it seems to be failing.
Link: https://github.com/bluez/bluez/issues/575
Fixes: d0b137062b ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d47da6bd4cfa982fe903f33423b9e2ec541e9496 ]
If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.
Fixes: b644ba3369 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d7c6ae1efb1ff68bc01d79d94fdf0388f86cdd8 ]
In the `wilc_parse_join_bss_param` function, the TSF field of the `ies`
structure is accessed after the RCU read-side critical section is
unlocked. According to RCU usage rules, this is illegal. Reusing this
pointer can lead to unpredictable behavior, including accessing memory
that has been updated or causing use-after-free issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the TSF value is now stored in a local variable
`ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is
then assigned using this local variable, ensuring that the TSF value is
safely accessed.
Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/tencent_466225AA599BA49627FB26F707EE17BC5407@qq.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d301de12da6e1bb069a9835c38359b8e8135121 ]
Since '__dev_queue_xmit()' should be called with interrupts enabled,
the following backtrace:
ieee80211_do_stop()
...
spin_lock_irqsave(&local->queue_stop_reason_lock, flags)
...
ieee80211_free_txskb()
ieee80211_report_used_skb()
ieee80211_report_ack_skb()
cfg80211_mgmt_tx_status_ext()
nl80211_frame_tx_status()
genlmsg_multicast_netns()
genlmsg_multicast_netns_filtered()
nlmsg_multicast_filtered()
netlink_broadcast_filtered()
do_one_broadcast()
netlink_broadcast_deliver()
__netlink_sendskb()
netlink_deliver_tap()
__netlink_deliver_tap_skb()
dev_queue_xmit()
__dev_queue_xmit() ; with IRQS disabled
...
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags)
issues the warning (as reported by syzbot reproducer):
WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120
Fix this by implementing a two-phase skb reclamation in
'ieee80211_do_stop()', where actual work is performed
outside of a section with interrupts disabled.
Fixes: 5061b0c2b9 ("mac80211: cooperate more with network namespaces")
Reported-by: syzbot+1a3986bbd3169c307819@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240906123151.351647-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15ea13b1b1fbf6364d4cd568e65e4c8479632999 ]
Although not reproduced in practice, these two cases may be
considered by UBSAN as off-by-one errors. So fix them in the
same way as in commit a26a5107bc52 ("wifi: cfg80211: fix UBSAN
noise in cfg80211_wext_siwscan()").
Fixes: 807f8a8c30 ("cfg80211/nl80211: add support for scheduled scans")
Fixes: 5ba63533bb ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240909090806.1091956-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a26a5107bc52922cf5f67361e307ad66547b51c7 ]
Looking at https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
and running reproducer with CONFIG_UBSAN_BOUNDS, I've noticed the
following:
[ T4985] UBSAN: array-index-out-of-bounds in net/wireless/scan.c:3479:25
[ T4985] index 164 is out of range for type 'struct ieee80211_channel *[]'
<...skipped...>
[ T4985] Call Trace:
[ T4985] <TASK>
[ T4985] dump_stack_lvl+0x1c2/0x2a0
[ T4985] ? __pfx_dump_stack_lvl+0x10/0x10
[ T4985] ? __pfx__printk+0x10/0x10
[ T4985] __ubsan_handle_out_of_bounds+0x127/0x150
[ T4985] cfg80211_wext_siwscan+0x11a4/0x1260
<...the rest is not too useful...>
Even if we do 'creq->n_channels = n_channels' before 'creq->ssids =
(void *)&creq->channels[n_channels]', UBSAN treats the latter as
off-by-one error. Fix this by using pointer arithmetic rather than
an expression with explicit array indexing and use convenient
'struct_size()' to simplify the math here and in 'kzalloc()' above.
Fixes: 5ba63533bb ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240905150400.126386-1-dmantipov@yandex.ru
[fix coding style for multi-line calculation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b04f06fc0243600665b3b50253869533b7938468 ]
The master ooo cannot be completely closed when the
accelerator core reports memory error. Therefore, the driver
needs to inject the qm error to close the master ooo. Currently,
the qm error is injected after stopping queue, memory may be
released immediately after stopping queue, causing the device to
access the released memory. Therefore, error is injected to close master
ooo before stopping queue to ensure that the device does not access
the released memory.
Fixes: 6c6dd5802c ("crypto: hisilicon/qm - add controller reset interface")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d2d1ee0874c26b8010ddf7f57e2f246e848af38 ]
Before the device is enabled again, the device may still
store the previously processed data. If an error occurs in
the previous task, the device may fail to be enabled again.
Therefore, before enabling device, reset the device to restore
the initial state.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: b04f06fc0243 ("crypto: hisilicon/qm - inject error before stopping queue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ced18fd179 ]
1. Remove extra blank lines.
2. Remove extra spaces.
3. Use spaces instead of tabs around '=' and '\',
to ensure consistent coding styles.
4. Macros should be capital letters, change 'QM_SQC_VFT_NUM_MASK_v2'
to 'QM_SQC_VFT_NUM_MASK_V2'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: b04f06fc0243 ("crypto: hisilicon/qm - inject error before stopping queue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 145013f723947c83b1a5f76a0cf6e7237d59e973 ]
The timeout threshold of the hpre cluster is 16ms. When the CPU
and device share virtual address, page fault processing time may
exceed the threshold.
In the current test, there is a high probability that the
cluster times out. However, the cluster is waiting for the
completion of memory access, which is not an error, the device
does not need to be reset. If an error occurs in the cluster,
qm also reports the error. Therefore, the cluster timeout
error of hpre can be masked.
Fixes: d90fab0deb ("crypto: hisilicon/qm - get error type from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 391dde6e48 ]
Enable sva error interrupt event. When an error occurs on
the sva module, the device reports an abnormal interrupt to
the driver.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 145013f72394 ("crypto: hisilicon/hpre - mask cluster timeout error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c936844010466535bd46ea4ce4656ef17653644 ]
When the current node doesn't have an EPC section configured by firmware
and all other EPC sections are used up, CPU can get stuck inside the
while loop that looks for an available EPC page from remote nodes
indefinitely, leading to a soft lockup. Note how nid_of_current will
never be equal to nid in that while loop because nid_of_current is not
set in sgx_numa_mask.
Also worth mentioning is that it's perfectly fine for the firmware not
to setup an EPC section on a node. While setting up an EPC section on
each node can enhance performance, it is not a requirement for
functionality.
Rework the loop to start and end on *a* node that has SGX memory. This
avoids the deadlock looking for the current SGX-lacking node to show up
in the loop when it never will.
Fixes: 901ddbb9ec ("x86/sgx: Add a basic NUMA allocation scheme to sgx_alloc_epc_page()")
Reported-by: "Molina Sabido, Gerardo" <gerardo.molina.sabido@intel.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Zhimin Luo <zhimin.luo@intel.com>
Link: https://lore.kernel.org/all/20240905080855.1699814-2-aaron.lu%40intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abc00ffda43bd4ba85896713464c7510c39f8165 ]
Commit b4bc9f9e27 ("cpufreq: ti-cpufreq: add support for omap34xx
and omap36xx") introduced special handling for OMAP3 class devices
where syscon node may not be present. However, this also creates a bug
where the syscon node is present, however the offset used to read
is beyond the syscon defined range.
Fix this by providing a quirk option that is populated when such
special handling is required. This allows proper failure for all other
platforms when the syscon node and efuse offsets are mismatched.
Fixes: b4bc9f9e27 ("cpufreq: ti-cpufreq: add support for omap34xx and omap36xx")
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 359414b33e00bae91e4eabf3e4ef8e76024c7673 ]
While CMN_MAX_DIMENSION was bumped to 12 for CMN-650, that only supports
up to a 10x10 mesh, so bumping dtm_idx to 256 bits at the time worked
out OK in practice. However CMN-700 did finally support up to 144 XPs,
and thus needs a worst-case 288 bits of dtm_idx for an aggregated XP
event on a maxed-out config. Oops.
Fixes: 23760a0144 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e771b358526a0d7fc06efee2c3a2fdc0c9f51d44.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e79634b53e398966c49f803c49701bc74dc3ccf8 ]
The scope of the "extra device ports" configuration is not made clear by
the CMN documentation - so far we've assumed it applies globally, based
on the sole example which suggests as much. However it transpires that
this is incorrect, and the format does in fact vary based on each
individual XP's port configuration. As a consequence, we're currenly
liable to decode the port/device indices from a node ID incorrectly,
thus program the wrong event source in the DTM leading to bogus event
counts, and also show device topology on the wrong ports in debugfs.
To put this right, rework node IDs yet again to carry around the
additional data necessary to decode them properly per-XP. At this point
the notion of fully decomposing an ID becomes more impractical than it's
worth, so unabstracting the XY mesh coordinates (where 2/3 users were
just debug anyway) ends up leaving things a bit simpler overall.
Fixes: 60d1504070 ("perf/arm-cmn: Support new IP features")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5195f990152fc37adba5fbf5929a6b11063d9f09.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1083ee717e9bde012268782e084d343314490a4 ]
The debugfs pretty-printer was written for the CMN-600 assumptions of a
maximum 8x8 mesh, but CMN-700 now allows coordinates and ID values up to
12 and 128 respectively, which can overflow the format strings, mess up
the alignment of the table and hurt overall readability. This table does
prove useful for double-checking that the driver is picking up the
topology of new systems correctly and for verifying user expectations,
so tweak the formatting to stay nice and readable with wider values.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1d1517eadd1bac5992fab679c9dc531b381944da.1702484646.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: e79634b53e39 ("perf/arm-cmn: Refactor node ID handling. Again.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7633ec2c262fab3e7c5bf3cd3876b5748f584a57 ]
The bitmap-based scheme for tracking DTC counter usage turns out to be a
complete dead-end for its imagined purpose, since by the time we have to
keep track of a per-DTC counter index anyway, we already have enough
information to make the bitmap itself redundant. Revert the remains of
it back to almost the original scheme, but now expanded to track per-DTC
indices, in preparation for making use of them in anger.
Note that since cycle count events always use a dedicated counter on a
single DTC, we reuse the field to encode their DTC index directly.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/5f6ade76b47f033836d7a36c03555da896dfb4a3.1697824215.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: e79634b53e39 ("perf/arm-cmn: Refactor node ID handling. Again.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15d8605c0cf4fc9cf4386cae658c68a0fd4bdb92 ]
Mutex is held when adding an element, no need for READ_ONCE, remove it.
Fixes: 123b99619c ("netfilter: nf_tables: honor set timeout and garbage collection updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0f38a8c60174368aed1d0f9965d733195f15033 ]
Report ERANGE to userspace if user specifies an expiration larger than
the timeout.
Fixes: 8e1102d5a1 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2dc429ecb4e79ad164028d965c00f689e6f6d06 ]
If element timeout is unset and set provides no default timeout, the
element expiration is silently ignored, reject this instead to let user
know this is unsupported.
Also prepare for supporting timeout that never expire, where zero
timeout and expiration must be also rejected.
Fixes: 8e1102d5a1 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0c47281723f301894c14e6f5cd5884fdfb813f9 ]
Element timeout that is below CONFIG_HZ never expires because the
timeout extension is not allocated given that nf_msecs_to_jiffies64()
returns 0. Set timeout to the minimum value to honor timeout.
Fixes: 8e1102d5a1 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60949b7b805424f21326b450ca4f1806c06d982e ]
MASK_VAL() was added as a way to handle bit_offset and bit_width for
registers located in system memory address space. However, while suited
for reading, it does not work for writing and result in corrupted
registers when writing values with bit_offset > 0. Moreover, when a
register is collocated with another one at the same address but with a
different mask, the current code results in the other registers being
overwritten with 0s. The write procedure for SYSTEM_MEMORY registers
should actually read the value, mask it, update it and write it with the
updated value. Moreover, since registers can be located in the same
word, we must take care of locking the access before doing it. We should
potentially use a global lock since we don't know in if register
addresses aren't shared with another _CPC package but better not
encourage vendors to do so. Assume that registers can use the same word
inside a _CPC package and thus, use a per _CPC package lock.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20240826101648.95654-1-cleger@rivosinc.com
[ rjw: Dropped redundant semicolon ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f0315330af7a57c1c00587fdfb69c7778bf1c50 ]
The test case for SME vector length changes via sigreturn use a bit too
much cut'n'paste and only actually changed the SVE vector length in the
test itself. Andre's recent factoring out of the initialisation code caused
this to be exposed and the test to start failing. Fix the test to actually
cover the thing it's supposed to test.
Fixes: 4963aeb35a ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240829-arm64-sme-signal-vl-change-test-v1-1-42d7534cb818@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daecd3373a16a039ad241086e30a1ec46fc9d61f ]
Currently we set the period and record it as the initial value of the
counter without checking it's set to the hardware successfully or not.
However the counter maybe unwritable if the target event is unsupported
by the device. In such case we will pass user a wrong count:
[start counts when setting the period]
hwc->prev_count = 0x8000000000000000
device.counter_value = 0 // the counter is not set as the period
[when user reads the counter]
event->count = device.counter_value - hwc->prev_count
= 0x8000000000000000 // wrong. should be 0.
Fix this by record the hardware counter counts correctly when setting
the period.
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240829090332.28756-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24cc57d8faaa4060fd58adf810b858fcfb71a02f ]
In the case where we are forcing the ps.chunk_size to be at least 1,
we are ignoring the caller's alignment.
Move the forcing of ps.chunk_size to be at least 1 before rounding it
up to caller's alignment, so that caller's alignment is honored.
While at it, use max() to force the ps.chunk_size to be at least 1 to
improve readability.
Fixes: 6d45e1c948a8 ("padata: Fix possible divide-by-0 panic in padata_mt_helper()")
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c82c507126c9c9db350be28f14c83fad1c7969ae ]
ACPICA commit 129b75516fc49fe1fd6b8c5798f86c13854630b3
Stop nagging user about every Stall() that violates the spec
On my Dell XPS 15 7590 I get hundreds of these warnings after few hours of
uptime:
$ dmesg | grep "fix the firmware" | wc -l
261
I cannot fix the firmware and I doubt that Dell cares about 4 year old
laptop either
Fixes: ace8f1c54a ("ACPICA: executer/exsystem: Inform users about ACPI spec violation")
Link: https://github.com/acpica/acpica/commit/129b7551
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
