[ Upstream commit ded600ea9f ]
If of_clk_get() fails, the clean-up of already initialized clocks should be
the same as when clk_prepare_enable() fails. Thus a clk_disable_unprepare()
for each clock should be called before the clk_put().
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 16adc674d0 ("usb: dwc3: ep0: fix setup_packet_pending initialization")
Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 732706afe1 ]
On policies with a transport mode template, we pass the addresses
from the flowi to xfrm_state_find(), assuming that the IP addresses
(and address family) don't change during transformation.
Unfortunately our policy template validation is not strict enough.
It is possible to configure policies with transport mode template
where the address family of the template does not match the selectors
address family. This lead to stack-out-of-bound reads because
we compare arddesses of the wrong family. Fix this by refusing
such a configuration, address family can not change on transport
mode.
We use the assumption that, on transport mode, the first templates
address family must match the address family of the policy selector.
Subsequent transport mode templates must mach the address family of
the previous template.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4d02ebd9bb ]
Mistakenly the driver didn't allow RSS hash fields combinations which
involve both IPv4 and IPv6 protocols. This bug caused to failures for
user's use cases for RSS.
Consequently, this patch fixes this bug and allows any combination that
the HW can support.
Additionally, the patch fixes the driver to return an error in case the
user provides an unsupported mask for RSS hash fields.
Fixes: 3078f5f1bd ("IB/mlx4: Add support for RSS QP")
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c7b92172a6 ]
Disable the clocks in rk_spdif_probe when an error occurs after one
of the clocks has been enabled previously.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: f874b80e15 ASoC: rockchip: Add rockchip SPDIF transceiver driver
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 975b820b68 ]
In some cases the clock parent would be set NULL when doing re-parent,
it will cause a NULL pointer accessing if clk_set trace event is
enabled.
This patch sets the parent as "none" if the input parameter is NULL.
Fixes: dfc202ead3 (clk: Add tracepoints for hardware operations)
Signed-off-by: Cai Li <cai.li@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6ab405114b ]
Check whether inputs from userspace are too long (explicit length field too
big or string not null-terminated) to avoid out-of-bounds reads.
As far as I can tell, this can at worst lead to very limited kernel heap
memory disclosure or oopses.
This bug can be triggered by an unprivileged user even if the xt_bpf module
is not loaded: iptables is available in network namespaces, and the xt_bpf
module can be autoloaded.
Triggering the bug with a classic BPF filter with fake length 0x1000 causes
the following KASAN report:
==================================================================
BUG: KASAN: slab-out-of-bounds in bpf_prog_create+0x84/0xf0
Read of size 32768 at addr ffff8801eff2c494 by task test/4627
CPU: 0 PID: 4627 Comm: test Not tainted 4.15.0-rc1+ #1
[...]
Call Trace:
dump_stack+0x5c/0x85
print_address_description+0x6a/0x260
kasan_report+0x254/0x370
? bpf_prog_create+0x84/0xf0
memcpy+0x1f/0x50
bpf_prog_create+0x84/0xf0
bpf_mt_check+0x90/0xd6 [xt_bpf]
[...]
Allocated by task 4627:
kasan_kmalloc+0xa0/0xd0
__kmalloc_node+0x47/0x60
xt_alloc_table_info+0x41/0x70 [x_tables]
[...]
The buggy address belongs to the object at ffff8801eff2c3c0
which belongs to the cache kmalloc-2048 of size 2048
The buggy address is located 212 bytes inside of
2048-byte region [ffff8801eff2c3c0, ffff8801eff2cbc0)
[...]
==================================================================
Fixes: e6f30c7317 ("netfilter: x_tables: add xt_bpf match")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62a277d43d ]
_xt_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference.
Fix this by moving the pointer dereference after _xt_ has been null
checked.
This issue was detected with the help of Coccinelle.
Fixes: 4483320e24 ("dmaengine: Use Pointer xt after NULL check.")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48d83282db upstream.
A regression fix introduced a harmless type mismatch warning:
drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_vendor_request':
drivers/scsi/bfa/bfad_bsg.c:3137:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion]
struct bfad_im_port_s *im_port = shost->hostdata[0];
^~~~~
drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_els_ct_request':
drivers/scsi/bfa/bfad_bsg.c:3353:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion]
struct bfad_im_port_s *im_port = shost->hostdata[0];
This changes the code back to shost_priv() once more, but encapsulates
it in an inline function to document the rather unusual way of
using the private data only as a pointer to the previously allocated
structure.
I did not try to get rid of the extra indirection level entirely,
which would have been rather invasive and required reworking the entire
initialization sequence.
Fixes: 45349821ab ("scsi: bfa: fix access to bfad_im_port_s")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Sasha Levin <Alexander.Levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b6b5e8a691 ]
This controller does not support EEE, but it may connect to a PHY
which supports EEE and advertises EEE by default, while its link
partner also advertises EEE. If this happens, the PHY enters low
power mode when the traffic rate is low and causes packet loss.
This patch disables EEE advertisement by default for any PHY that
gianfar connects to, to prevent the above unwanted outcome.
Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
Tested-by: Yangbo Lu <Yangbo.lu@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8dfd2f22d3 ]
Callers of sprint_oid() do not check its return value before printing
the result. In the case where the OID is zero-length, -EBADMSG was
being returned without anything being written to the buffer, resulting
in uninitialized stack memory being printed. Fix this by writing
"(bad)" to the buffer in the cases where -EBADMSG is returned.
Fixes: 4f73175d03 ("X.509: Add utility functions to render OIDs as strings")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3126aeec53 ]
The MDIO busses need to be unregistered before they are freed,
otherwise BUG() is called. Add a call to the unregister code if the
registration fails, since we can have multiple busses, of which some
may correctly register before one fails. This requires moving the code
around a little.
Fixes: a3c53be55c ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3d5fdba184 ]
When removing the interrupt handling code, we should mask the
generation of interrupts. The code however unmasked all
interrupts. This can then cause a new interrupt. We then get into a
deadlock where the interrupt thread is waiting to run, and the code
continues, trying to remove the interrupt handler, which means waiting
for the thread to complete. On a UP machine this deadlocks.
Fix so we really mask interrupts in the hardware. The same error is
made in the error path when install the interrupt handling code.
Fixes: 3460a5770c ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 51ef7925e1 ]
When I run make W=1 on gcc (Debian 7.2.0-16) 7.2.0 I got an error for
the first run, all next ones are okay.
CC [M] drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!
scripts/Makefile.build:310: recipe for target 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o' failed
Seems like something happened with W=1 and wrong kernel doc format.
As a quick fix remove dubious /** in the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c8bcbfbd23 ]
The name char array passed to btrfs_search_path_in_tree is of size
BTRFS_INO_LOOKUP_PATH_MAX (4080). So the actual accessible char indexes
are in the range of [0, 4079]. Currently the code uses the define but this
represents an off-by-one.
Implications:
Size of btrfs_ioctl_ino_lookup_args is 4096, so the new byte will be
written to extra space, not some padding that could be provided by the
allocator.
btrfs-progs store the arguments on stack, but kernel does own copy of
the ioctl buffer and the off-by-one overwrite does not affect userspace,
but the ending 0 might be lost.
Kernel ioctl buffer is allocated dynamically so we're overwriting
somebody else's memory, and the ioctl is privileged if args.objectid is
not 256. Which is in most cases, but resolving a subvolume stored in
another directory will trigger that path.
Before this patch the buffer was one byte larger, but then the -1 was
not added.
Fixes: ac8e9819d7 ("Btrfs: add search and inode lookup ioctls")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added implications ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1b9e619c5b ]
I was seeing disk flushes still happening when I mounted a Btrfs
filesystem with nobarrier for testing. This is because we use FUA to
write out the first super block, and on devices without FUA support, the
block layer translates FUA to a flush. Even on devices supporting true
FUA, using FUA when we asked for no barriers is surprising.
Fixes: 387125fc72 ("Btrfs: fix barrier flushes")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b430b77512 ]
Commit c6887cd111 ("Btrfs: don't do nocow check unless we have to")
changed the behavior of __btrfs_buffered_write() so that it first tries
to get a data space reservation, and then skips the relatively expensive
nocow check if the reservation succeeded.
If we have quotas enabled, the data space reservation also includes a
quota reservation. But in the rewrite case, the space has already been
accounted for in qgroups. So btrfs_check_data_free_space() increases
the quota reservation, but it never gets decreased when the data
actually gets written and overwrites the pre-existing data. So we're
left with both the qgroup and qgroup reservation accounting for the same
space.
This commit adds the missing btrfs_qgroup_free_data() call in the case
of BTRFS_ORDERED_PREALLOC extents.
Fixes: c6887cd111 ("Btrfs: don't do nocow check unless we have to")
Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c20a548792 ]
If a skb in transmit path does not have sufficient headroom to add
the map header, the skb is not sent out and is never freed.
Fixes: ceed73a2cf ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5811767294 ]
According to LS1021A RM, the value of PAL can be set so that the start of the
IP header in the receive data buffer is aligned to a 32-bit boundary. Normally,
setting PAL = 2 provides minimal padding to ensure such alignment of the IP
header.
However every incoming packet's 8-byte time stamp will be inserted into the
packet data buffer as padding alignment bytes when hardware time stamping is
enabled.
So we set the padding 8+2 here to avoid the flooded alignment faults:
root@128:~# cat /proc/cpu/alignment
User: 0
System: 17539 (inet_gro_receive+0x114/0x2c0)
Skipped: 0
Half: 0
Word: 0
DWord: 0
Multi: 17539
User faults: 2 (fixup)
Also shown when exception report enablement
CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16
Hardware name: Freescale LS1021A
[<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24)
[<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac)
[<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958)
[<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc)
[<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60)
Exception stack(0x86ad1cc0 to 0x86ad1d08)
1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000
1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c
1d00: 40070013 ffffffff
[<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0)
[<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0)
[<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c)
[<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4)
[<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0)
[<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c)
[<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc)
[<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8)
[<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84)
[<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244)
[<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104)
[<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c)
Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d364b038bc ]
Looks like the interrupt property is missing the controller and level
information causing:
Warning (interrupts_property): interrupts size is (4), expected multiple
of 12 in /ocp/elm@48078000
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit da340f921d ]
Prevent that a prefix flag is set based on invalid configuration data.
The validity.verify_base flag should only be set for alias devices.
Usually the unit address type is either one of base, PAV alias or
HyperPAV alias. But in cases where the unit address type is not set or
any other value the validity.verify_base flag might be set as well.
This would lead to follow on errors.
Explicitly check for alias devices and set the validity flag only for
them.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit edfb8d8fcb ]
The original intent of the virtio header relicensing
from 2008 was to make sure anyone can implement compatible
devices/drivers. The virtio-ccw was omitted by mistake.
We have an ack from the only contributor as well as the
maintainer from IBM, so it's not too late to fix that.
Make it dual-licensed with GPLv2, as the whole kernel is GPL2.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 31eb743180 ]
Prevent rpm_get_suppliers() from returning an error code if runtime
PM is disabled for one or more of the supplier devices it wants to
runtime-resume, so as to make runtime PM work for devices with links
to suppliers that don't use runtime PM (such links may be created
during device enumeration even before it is known whether or not
runtime PM will be enabled for the devices in question, for example).
Fixes: 21d5c57b37 (PM / runtime: Use device links)
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5aa04b3eb6 ]
When user tries to group imc (In-Memory Collections) event with
normal event, (sometime) kernel crashes with following log:
Faulting instruction address: 0x00000000
[link register ] c00000000010ce88 power_check_constraints+0x128/0x980
...
c00000000010e238 power_pmu_event_init+0x268/0x6f0
c0000000002dc60c perf_try_init_event+0xdc/0x1a0
c0000000002dce88 perf_event_alloc+0x7b8/0xac0
c0000000002e92e0 SyS_perf_event_open+0x530/0xda0
c00000000000b004 system_call+0x38/0xe0
'event_base' field of 'struct hw_perf_event' is used as flags for
normal hw events and used as memory address for imc events. While
grouping these two types of events, collect_events() tries to
interpret imc 'event_base' as a flag, which causes a corruption
resulting in a crash.
Consider only those events which belongs to 'perf_hw_context' in
collect_events().
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-By: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 969de0988b ]
Commit be7635e728 ("arch, ftrace: for KASAN put hard/soft IRQ entries
into separate sections") added a new linker section, SOFTIRQENTRY_TEXT,
to the linker scripts for most architectures. It didn't add it to any of
the linker scripts for the m68k architecture. This was not really a problem
because it is only defined if either of CONFIG_FUNCTION_GRAPH_TRACER or
CONFIG_KASAN are enabled - which can never be true for m68k.
However commit 229a718605 ("irq: Make the irqentry text section
unconditional") means that SOFTIRQENTRY_TEXT is now always defined. So on
m68k we now end up with a separate ELF section for .softirqentry.text
instead of it being part of the .text section. On some m68k targets in some
configurations this can also cause a fatal link error:
LD vmlinux
/usr/local/bin/../m68k-uclinux/bin/ld.real: section .softirqentry.text loaded at [0000000010de10c0,0000000010de12dd] overlaps section .rodata loaded at [0000000010de10c0,0000000010e0fd67]
To fix add in the missing SOFTIRQENTRY_TEXT section into the m68k linker
scripts. I noticed that m68k is also missing the IRQENTRY_TEXT section,
so this patch also adds an entry for that too.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a7f3f939dd ]
The current 'bnxt_shutdown' implementation only invokes
'bnxt_ulp_shutdown' to shut down RoCE in the case when the system is in
the path of power off (SYSTEM_POWER_OFF). While this may work in most
cases, it does not work in the smart NIC case, when Linux 'reboot'
command is initiated from the Linux that runs on the ARM cores of the
NIC card. In this particular case, Linux 'reboot' results in a system
'L3' level reset where the entire ARM and associated subsystems are
being reset, but at the same time, Nitro core is being kept in sane state
(to allow external PCIe connected servers to continue to work). Without
properly shutting down RoCE and freeing all associated resources, it
results in the ARM core to hang immediately after the 'reboot'
By always invoking 'bnxt_ulp_shutdown' in 'bnxt_shutdown', it fixes the
above issue
Fixes: 0efd2fc65c ("bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e814bccbaf ]
My bisect scripts starting running into build failures when trying to
compile 4.15-rc1 with the builds failing with things like:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union!
The line in question is actually just a #define, but after some digging
it turns out that my scripts pass W=1 and since commit 3a025e1d1c
("Add optional check for bad kernel-doc comments") that results in
kernel-doc running on each source file. The file in question has a
badly formatted comment immediately before the #define:
/**
* struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for
* bus layer usage.
*/
which causes the regex in dump_struct to fail (lack of braces following
struct declaration) and kernel-doc returns 1, which causes the build
to fail.
Fix the issue by always returning 0 from kernel-doc when invoked with
-none. It successfully generates no documentation, and prints out any
issues.
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c175cb7cd9 ]
Fix build errors in kernel-doc notation. Symbols that end in '_'
have a special meaning, but adding a '*' makes them OK.
../drivers/iio/industrialio-core.c:635: ERROR: Unknown target name: "iio_val".
../drivers/iio/industrialio-core.c:642: ERROR: Unknown target name: "iio_val".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e53111ad5d ]
The commit 0f0796509c
("iio: remove gpio interrupt probing from drivers that use a single interrupt")
removed custom IRQ assignment for the drivers which are enumerated via
ACPI or OF. Unfortunately, some ACPI tables have IRQ line defined as
GpioIo() resource and thus automatic IRQ allocation will fail.
Partially revert the commit 0f0796509c to restore original behaviour.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
