commit c724f776f0 upstream.
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 2865d42c78 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc: stable <stable@vger.kernel.org> # 2.6.37
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210114751.5119-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74ca34118a upstream.
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: c2478d3907 ("staging: r8188eu: Add files for new driver - part 20")
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210114751.5119-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1af73a25e6 upstream.
`rename_file' was exported but not properly namespaced causing a
multiple definition error because `rename_file' is already defined in
fs/hostfs/hostfs_user.c:
ld: drivers/staging/exfat/exfat_core.o: in function `rename_file':
drivers/staging/exfat/exfat_core.c:2327: multiple definition of
`rename_file'; fs/hostfs/hostfs_user.o:fs/hostfs/hostfs_user.c:350:
first defined here
make: *** [Makefile:1077: vmlinux] Error 1
This error can be reproduced on ARCH=um by selecting:
CONFIG_EXFAT_FS=y
CONFIG_HOSTFS=y
Add a namespace prefix exfat_* to fix this error.
Reported-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Cc: stable <stable@vger.kernel.org>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20191204234522.42855-1-brendanhiggins@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e76b3bf765 upstream.
On Dell WD15 dock, sometimes USB ethernet cannot be detected after plugging
cable to the ethernet port, the hub and roothub get runtime resumed and
runtime suspended immediately:
...
[ 433.315169] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0
[ 433.315204] usb usb4: usb auto-resume
[ 433.315226] hub 4-0:1.0: hub_resume
[ 433.315239] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10202e2, return 0x10343
[ 433.315264] usb usb4-port1: status 0343 change 0001
[ 433.315279] xhci_hcd 0000:3a:00.0: clear port1 connect change, portsc: 0x10002e2
[ 433.315293] xhci_hcd 0000:3a:00.0: Get port status 4-2 read: 0x2a0, return 0x2a0
[ 433.317012] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[ 433.422282] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343
[ 433.422307] usb usb4-port1: do warm reset
[ 433.422311] usb 4-1: device reset not allowed in state 8
[ 433.422339] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 433.422346] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343
[ 433.422356] usb usb4-port1: do warm reset
[ 433.422358] usb 4-1: device reset not allowed in state 8
[ 433.422428] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 0 status = 0xf0002e2
[ 433.422455] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 1 status = 0xe0002a0
[ 433.422465] hub 4-0:1.0: hub_suspend
[ 433.422475] usb usb4: bus auto-suspend, wakeup 1
[ 433.426161] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[ 433.466209] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.510204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.554051] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.598235] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.642154] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.686204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.730205] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.774203] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.818207] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.862040] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting
[ 433.862053] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[ 433.862077] xhci_hcd 0000:3a:00.0: xhci_suspend: stopping port polling.
[ 433.862096] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001
[ 433.862312] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_suspend: 0
[ 433.862445] xhci_hcd 0000:3a:00.0: PME# enabled
[ 433.902376] xhci_hcd 0000:3a:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20)
[ 433.902395] xhci_hcd 0000:3a:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100403)
[ 433.902490] xhci_hcd 0000:3a:00.0: PME# disabled
[ 433.902504] xhci_hcd 0000:3a:00.0: enabling bus mastering
[ 433.902547] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001
[ 433.902649] pcieport 0000:00:1b.0: PME: Spurious native interrupt!
[ 433.902839] xhci_hcd 0000:3a:00.0: Port change event, 4-1, id 3, portsc: 0xb0202e2
[ 433.902842] xhci_hcd 0000:3a:00.0: resume root hub
[ 433.902845] xhci_hcd 0000:3a:00.0: handle_port_status: starting port polling.
[ 433.902877] xhci_hcd 0000:3a:00.0: xhci_resume: starting port polling.
[ 433.902889] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling.
[ 433.902891] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0
[ 433.902919] usb usb4: usb wakeup-resume
[ 433.902942] usb usb4: usb auto-resume
[ 433.902966] hub 4-0:1.0: hub_resume
...
As Mathias pointed out, the hub enters Cold Attach Status state and
requires a warm reset. However usb_reset_device() bails out early when
the device is in suspended state, as its callers port_event() and
hub_event() don't always resume the device.
Since there's nothing wrong to reset a suspended device, allow
usb_reset_device() to do so to solve the issue.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191106062710.29880-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4adc0423de upstream.
v4l2_compat_ioctl32() is the function that calls into
v4l2_file_operations->compat_ioctl32(), so setting that back to the same
function leads to a trivial endless loop, followed by a kernel
stack overrun.
Remove the incorrect assignment.
Cc: stable@vger.kernel.org
Fixes: 7472c1c691 ("[media] media: venus: vdec: add video decoder files")
Fixes: aaaa93eda6 ("[media] media: venus: venc: add video encoder files")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18bd6caaef upstream.
The ceph_ioctl function is used both for files and directories, but only
the files support doing that in 32-bit compat mode.
On the s390 architecture, there is also a problem with invalid 31-bit
pointers that need to be passed through compat_ptr().
Use the new compat_ptr_ioctl() to address both issues.
Note: When backporting this patch to stable kernels, "compat_ioctl:
add compat_ptr_ioctl()" is needed as well.
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2952db0fd5 upstream.
Many drivers have ioctl() handlers that are completely compatible between
32-bit and 64-bit architectures, except for the argument that is passed
down from user space and may have to be passed through compat_ptr()
in order to become a valid 64-bit pointer.
Using ".compat_ptr = compat_ptr_ioctl" in file operations should let
us simplify a lot of those drivers to avoid #ifdef checks, and convert
additional drivers that don't have proper compat handling yet.
On most architectures, the compat_ptr_ioctl() just passes all arguments
to the corresponding ->ioctl handler. The exception is arch/s390, where
compat_ptr() clears the top bit of a 32-bit pointer value, so user space
pointers to the second 2GB alias the first 2GB, as is the case for native
32-bit s390 user space.
The compat_ptr_ioctl() function must therefore be used only with
ioctl functions that either ignore the argument or pass a pointer to a
compatible data type.
If any ioctl command handled by fops->unlocked_ioctl passes a plain
integer instead of a pointer, or any of the passed data types is
incompatible between 32-bit and 64-bit architectures, a proper handler
is required instead of compat_ptr_ioctl.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
commit f45bca8c50 upstream.
Current code assumes abort will remove the original command from the active
list where scsi_done will not be called. Instead, the eh_abort thread will
do the scsi_done. That is not the case. Instead, we have a double
scsi_done calls triggering use after free.
Abort will tell FW to release the command from FW possesion. The original
command will return to ULP with error in its normal fashion via scsi_done.
eh_abort path would wait for the original command completion before
returning. eh_abort path will not perform the scsi_done call.
Fixes: 219d27d714 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands")
Cc: stable@vger.kernel.org # 5.2
Link: https://lore.kernel.org/r/20191105150657.8092-6-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 324e1c4020 upstream.
In cases where I/O may be aborted, such as driver unload or link bounces,
the system will crash based on a bad ndlp pointer.
Example:
RIP: 0010:lpfc_sli4_abts_err_handler+0x15/0x140 [lpfc]
...
lpfc_sli4_io_xri_aborted+0x20d/0x270 [lpfc]
lpfc_sli4_sp_handle_abort_xri_wcqe.isra.54+0x84/0x170 [lpfc]
lpfc_sli4_fp_handle_cqe+0xc2/0x480 [lpfc]
__lpfc_sli4_process_cq+0xc6/0x230 [lpfc]
__lpfc_sli4_hba_process_cq+0x29/0xc0 [lpfc]
process_one_work+0x14c/0x390
Crash was caused by a bad ndlp address passed to I/O indicated by the XRI
aborted CQE. The address was not NULL so the routine deferenced the ndlp
ptr. The bad ndlp also caused the lpfc_sli4_io_xri_aborted to call an
erroneous io handler. Root cause for the bad ndlp was an lpfc_ncmd that
was aborted, put on the abort_io list, completed, taken off the abort_io
list, sent to lpfc_release_nvme_buf where it was put back on the abort_io
list because the lpfc_ncmd->flags setting LPFC_SBUF_XBUSY was not cleared
on the final completion.
Rework the exchange busy handling to ensure the flags are properly set for
both scsi and nvme.
Fixes: c490850a09 ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing")
Cc: <stable@vger.kernel.org> # v5.1+
Link: https://lore.kernel.org/r/20191018211832.7917-6-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22802bf742 upstream.
Despite NVM Express specification 1.3 requires a controller claiming to
be 1.3 or higher implement Identify CNS 03h (Namespace Identification
Descriptor list), the driver doesn't really need this identification in
order to use a namespace. The code had already documented in comments
that we're not to consider an error to this command.
Return success if the controller provided any response to an
namespace identification descriptors command.
Fixes: 538af88ea7 ("nvme: make nvme_report_ns_ids propagate error back")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205679
Reported-by: Ingo Brunberg <ingo_brunberg@web.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: stable@vger.kernel.org # 5.4+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 02bf1f8b3c ]
As per commit 131b30c94f ("kselftest: exclude failed TARGETS from
runlist") failed targets were excluded from the runlist. But value
$$INSTALL_PATH is always NULL. It should be $INSTALL_PATH instead
$$INSTALL_PATH.
So, fix Makefile to use $INSTALL_PATH.
Fixes: 131b30c94f ("kselftest: exclude failed TARGETS from runlist")
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23f61b9fc5 ]
The ghes registration and refcount is broken in several ways:
* ghes_edac_register() returns with success for a 2nd instance
even if a first instance's registration is still running. This is
not correct as the first instance may fail later. A subsequent
registration may not finish before the first. Parallel registrations
must be avoided.
* The refcount was increased even if a registration failed. This
leads to stale counters preventing the device from being released.
* The ghes refcount may not be decremented properly on unregistration.
Always decrement the refcount once ghes_edac_unregister() is called to
keep the refcount sane.
* The ghes_pvt pointer is handed to the irq handler before registration
finished.
* The mci structure could be freed while the irq handler is running.
Fix this by adding a mutex to ghes_edac_register(). This mutex
serializes instances to register and unregister. The refcount is only
increased if the registration succeeded. This makes sure the refcount is
in a consistent state after registering or unregistering a device.
Note: A spinlock cannot be used here as the code section may sleep.
The ghes_pvt is protected by ghes_lock now. This ensures the pointer is
not updated before registration was finished or while the irq handler is
running. It is unset before unregistering the device including necessary
(implicit) memory barriers making the changes visible to other CPUs.
Thus, the device can not be used anymore by an interrupt.
Also, rename ghes_init to ghes_refcount for better readability and
switch to refcount API.
A refcount is needed because there can be multiple GHES structures being
defined (see ACPI 6.3 specification, 18.3.2.7 Generic Hardware Error
Source, "Some platforms may describe multiple Generic Hardware Error
Source structures with different notification types, ...").
Another approach to use the mci's device refcount (get_device()) and
have a release function does not work here. A release function will be
called only for device_release() with the last put_device() call. The
device must be deleted *before* that with device_del(). This is only
possible by maintaining an own refcount.
[ bp: touchups. ]
Fixes: 0fe5f281f7 ("EDAC, ghes: Model a single, logical memory controller")
Fixes: 1e72e673b9 ("EDAC/ghes: Fix Use after free in ghes_edac remove path")
Co-developed-by: James Morse <james.morse@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Co-developed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20191105200732.3053-1-rrichter@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c04571251b ]
The ast2600 no longer uses bit 4 in the control register to indicate a
1MHz clock (It now controls whether this watchdog is reset by a SOC
reset). This means we do not want to set it. It also does not need to be
set for the ast2500, as it is read-only on that SoC.
The comment next to the clock rate selection wandered away from where it
was set, so put it back next to the register setting it's describing.
Fixes: b3528b4874 ("watchdog: aspeed: Add support for AST2600")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191108032905.22463-1-joel@jms.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3fc3f3d09 ]
The first argument to WARN() is supposed to be a condition. The
original code will just print the mdname() instead of the full warning
message.
Fixes: c84a1372df ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af44d180e3 ]
i.MX8MN has different speed grade definition compared to
i.MX8MQ/i.MX8MM, when fuses are NOT written, the default
speed_grade should be set to minimum available OPP defined
in DT which is 1.2GHz, the corresponding speed_grade value
should be 0xb.
Fixes: 5b8010ba70 ("cpufreq: imx-cpufreq-dt: Add i.MX8MN support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca58f55108 ]
This is an alternative fix attemp for the issue reported in the commit
caa8422d01 ("ALSA: hda: Flush interrupts on disabling") that was
reverted later due to regressions. Instead of tweaking the hardware
disablement order and the enforced irq flushing, do calling
cancel_work_sync() of the unsol work early enough, and explicitly
ignore the unsol events during the shutdown by checking the
bus->shutdown flag.
Fixes: caa8422d01 ("ALSA: hda: Flush interrupts on disabling")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/s5h1ruxt9cz.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2a9edd056e upstream.
The old loop wouldn't stop when reaching `start` if `start==NULL`, instead
continuing backwards to index -1 and crashing.
Luckily you need to be highly privileged to map things at NULL, so it's not
a big problem.
Fix it by adjusting the loop so that the loop variable is always in bounds.
This patch is deliberately minimal to simplify backporting, but IMO this
function could use a refactor. The jump labels in the second loop body are
horrible (the error gotos should be jumping to free_range instead), and
both loops would look nicer if they just iterated upwards through indices.
And the up_read()+mmput() shouldn't be duplicated like that.
Cc: stable@vger.kernel.org
Fixes: 457b9a6f09 ("Staging: android: add binder driver")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191018205631.248274-3-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7a74d7ff5 upstream.
binder_alloc_mmap_handler() attempts to detect the use of ->mmap() on a
binder_proc whose binder_alloc has already been initialized by checking
whether alloc->buffer is non-zero.
Before commit 880211667b ("binder: remove kernel vm_area for buffer
space"), alloc->buffer was a kernel mapping address, which is always
non-zero, but since that commit, it is a userspace mapping address.
A sufficiently privileged user can map /dev/binder at NULL, tricking
binder_alloc_mmap_handler() into assuming that the binder_proc has not been
mapped yet. This leads to memory unsafety.
Luckily, no context on Android has such privileges, and on a typical Linux
desktop system, you need to be root to do that.
Fix it by using the mapping size instead of the mapping address to
distinguish the mapped case. A valid VMA can't have size zero.
Fixes: 880211667b ("binder: remove kernel vm_area for buffer space")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191018205631.248274-2-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8eb52a1ee3 upstream.
binder_alloc_print_pages() iterates over
alloc->pages[0..alloc->buffer_size-1] under alloc->mutex.
binder_alloc_mmap_handler() writes alloc->pages and alloc->buffer_size
without holding that lock, and even writes them before the last bailout
point.
Unfortunately we can't take the alloc->mutex in the ->mmap() handler
because mmap_sem can be taken while alloc->mutex is held.
So instead, we have to locklessly check whether the binder_alloc has been
fully initialized with binder_alloc_get_vma(), like in
binder_alloc_new_buf_locked().
Fixes: 8ef4665aa1 ("android: binder: Add page usage in binder stats")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191018205631.248274-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27ed14d0ec upstream.
This reverts commit fdc2de8712 ("serial/8250:
Add support for NI-Serial PXI/PXIe+485 devices").
The commit fdc2de8712 ("serial/8250: Add support for NI-Serial
PXI/PXIe+485 devices") introduced a breakage on NI-Serial PXI(e)-RS485
devices, RS-232 variants have no issue. The Linux system can enumerate the
NI-Serial PXI(e)-RS485 devices, but it broke the R/W operation on the
ports.
However, the implementation is working on the NI internal Linux RT kernel
but it does not work in the Linux main tree kernel. This is only affecting
NI products, specifically the RS-485 variants. Reverting the upstream
until a proper implementation that can apply to both NI internal Linux
kernel and Linux mainline kernel is figured out.
Signed-off-by: Je Yen Tam <je.yen.tam@ni.com>
Fixes: fdc2de8712 ("serial/8250: Add support for NI-Serial PXI/PXIe+485 devices")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191127075301.9866-1-je.yen.tam@ni.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 419e9c38aa upstream.
When splicing using iomap_dio_rw() to a pipe, we may leak pipe pages
because bio_iov_iter_get_pages() records that the pipe will have full
extent worth of data however if file size is not block size aligned
iomap_dio_rw() returns less than what bio_iov_iter_get_pages() set up
and splice code gets confused leaking a pipe page with the file tail.
Handle the situation similarly to the old direct IO implementation and
revert iter to actually returned read amount which makes iter consistent
with value returned from iomap_dio_rw() and thus the splice code is
happy.
Fixes: ff6a9292e6 ("iomap: implement direct I/O")
CC: stable@vger.kernel.org
Reported-by: syzbot+991400e8eba7e00a26e1@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cba22d86e0 upstream.
Currently, block device size in not updated on second and further open
for block devices where partition scan is disabled. This is particularly
annoying for example for DVD drives as that means block device size does
not get updated once the media is inserted into a drive if the device is
already open when inserting the media. This is actually always the case
for example when pktcdvd is in use.
Fix the problem by revalidating block device size on every open even for
devices with partition scan disabled.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8670b2b8b0 upstream.
udev has a feature of creating /dev/<node> device-nodes if it finds
a devnode:<node> modalias. This allows for auto-loading of modules that
provide the node. This requires to use a statically allocated minor
number for misc character devices.
However, rfkill uses dynamic minor numbers and prevents auto-loading
of the module. So allocate the next static misc minor number and use
it for rfkill.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Link: https://lore.kernel.org/r/20191024174042.19851-1-marcel@holtmann.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3e5ec1db8b upstream.
When improving the CS GPIO support at core level, the SPI_CS_HIGH
has been enabled for all the CS lines used for a given SPI controller.
However, the SPI framework allows to have on the same controller native
CS and GPIO CS. The native CS may not support the SPI_CS_HIGH, so they
should not be setup automatically.
With this patch the setting is done only for the CS that will use a
GPIO as CS
Fixes: f3186dd876 ("spi: Optionally use GPIO descriptors for CS GPIOs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20191018152929.3287-1-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cbb16b212 upstream.
Until a few years ago, this driver was only used with CS GPIO. The
only exception is CS0 on AT91RM9200 which has to use internal CS. A
limitation of the internal CS is that they don't support CS High.
So by using the CS GPIO the CS high configuration was available except
for the particular case CS0 on RM9200.
When the support for the internal chip-select was added, the check of
the CS high support was not updated. Due to this the driver accepts
this configuration for all the SPI controller v2 (used by all SoCs
excepting the AT91RM9200) whereas the hardware doesn't support it for
infernal CS.
This patch fixes the test to match the hardware capabilities.
Fixes: 4820303480 ("spi: atmel: add support for the internal chip-select of the spi controller")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20191017141846.7523-3-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
