[ Upstream commit 75bd32f5ce ]
Currently, on WCN3990, the station disconnect after hardware recovery is
not working as expected. This is because of setting the
IEEE80211_SDATA_DISCONNECT_HW_RESTART flag very early in the hardware
recovery process even before the driver invokes ieee80211_hw_restart().
On the contrary, mac80211 expects this flag to be set after
ieee80211_hw_restart() is invoked for it to trigger station disconnect.
Set the IEEE80211_SDATA_DISCONNECT_HW_RESTART flag in
ath10k_reconfig_complete() instead to fix this.
The other targets are not affected by this change, since the hardware
params flag is not set.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1
Fixes: 2c3fc50591 ("ath10k: Trigger sta disconnect on hardware restart")
Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230518101515.3820-1-quic_youghand@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60548b825b ]
Default samples/pktgen scripts send 60 byte packets as hardware adds
4-bytes FCS checksum, which fulfils minimum Ethernet 64 bytes frame
size.
XDP layer will not necessary have access to the 4-bytes FCS checksum.
This leads to bpf_xdp_load_bytes() failing as it tries to copy 64-bytes
from an XDP packet that only have 60-bytes available.
Fixes: 7722517422 ("samples/bpf: fixup some tools to be able to support xdp multibuffer")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/bpf/168545704139.2996228.2516528552939485216.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08880713ce ]
If CONFIG_DEBUG_FS is not set:
regulator: Failed to create debugfs directory
...
regulator-dummy: Failed to create debugfs directory
As per the comments for debugfs_create_dir(), errors returned by this
function should be expected, and ignored:
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned.
*
* NOTE: it's expected that most callers should _ignore_ the errors returned
* by this function. Other debugfs functions handle the fact that the "dentry"
* passed to them could be an error and they don't crash in that case.
* Drivers should generally work fine even if debugfs fails to init anyway.
Adhere to the debugfs spirit, and streamline all operations by:
1. Demoting the importance of the printed error messages to debug
level, like is already done in create_regulator(),
2. Further ignoring any returned errors, as by design, all debugfs
functions are no-ops when passed an error pointer.
Fixes: 2bf1c45be3 ("regulator: Fix error checking for debugfs_create_dir")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2f8bb6e113359ddfab7b59e4d4274bd4c06d6d0a.1685013051.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f04a32b2c5 ]
The sign-file utility (from scripts/) is used in prog_tests/verify_pkcs7_sig.c,
but the utility should not be called as a test. Executing this utility produces
the following error:
selftests: /linux/tools/testing/selftests/bpf: urandom_read
ok 16 selftests: /linux/tools/testing/selftests/bpf: urandom_read
selftests: /linux/tools/testing/selftests/bpf: sign-file
not ok 17 selftests: /linux/tools/testing/selftests/bpf: sign-file # exit=2
Also, urandom_read is mistakenly used as a test. It does not lead to an error,
but should be moved over to TEST_GEN_FILES as well. The empty TEST_CUSTOM_PROGS
can then be removed.
Fixes: fc97590668 ("selftests/bpf: Add test for bpf_verify_pkcs7_signature() kfunc")
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/ZEuWFk3QyML9y5QQ@example.org
Link: https://lore.kernel.org/bpf/88e3ab23029d726a2703adcf6af8356f7a2d3483.1684316821.git.legion@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 108598c39e ]
If it fails to attach fentry, the allocated bpf trampoline image will be
left in the system. That can be verified by checking /proc/kallsyms.
This meamleak can be verified by a simple bpf program as follows:
SEC("fentry/trap_init")
int fentry_run()
{
return 0;
}
It will fail to attach trap_init because this function is freed after
kernel init, and then we can find the trampoline image is left in the
system by checking /proc/kallsyms.
$ tail /proc/kallsyms
ffffffffc0613000 t bpf_trampoline_6442453466_1 [bpf]
ffffffffc06c3000 t bpf_trampoline_6442453466_1 [bpf]
$ bpftool btf dump file /sys/kernel/btf/vmlinux | grep "FUNC 'trap_init'"
[2522] FUNC 'trap_init' type_id=119 linkage=static
$ echo $((6442453466 & 0x7fffffff))
2522
Note that there are two left bpf trampoline images, that is because the
libbpf will fallback to raw tracepoint if -EINVAL is returned.
Fixes: e21aa34178 ("bpf: Fix fexit trampoline.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Link: https://lore.kernel.org/bpf/20230515130849.57502-2-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47e79cbeea ]
After commit e21aa34178 ("bpf: Fix fexit trampoline."), the selector is only
used to indicate how many times the bpf trampoline image are updated and been
displayed in the trampoline ksym name. After the trampoline is freed, the
selector will start from 0 again. So the selector is a useless value to the
user. We can remove it.
If the user want to check whether the bpf trampoline image has been updated
or not, the user can compare the address. Each time the trampoline image is
updated, the address will change consequently. Jiri also pointed out another
issue that perf is still using the old name "bpf_trampoline_%lu", so this
change can fix the issue in perf.
Fixes: e21aa34178 ("bpf: Fix fexit trampoline.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Link: https://lore.kernel.org/bpf/ZFvOOlrmHiY9AgXE@krava
Link: https://lore.kernel.org/bpf/20230515130849.57502-3-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04cb8453a9 ]
On aarch64, "bpftool feature" reports an incorrect BPF JIT limit:
$ sudo /sbin/bpftool feature
Scanning system configuration...
bpf() syscall restricted to privileged users
JIT compiler is enabled
JIT compiler hardening is disabled
JIT compiler kallsyms exports are enabled for root
skipping kernel config, can't open file: No such file or directory
Global memory limit for JIT compiler for unprivileged users is -201326592 bytes
This is because /proc/sys/net/core/bpf_jit_limit reports
$ sudo cat /proc/sys/net/core/bpf_jit_limit
68169519595520
...and an int is assumed in read_procfs(). Change read_procfs()
to return a long to avoid negative value reporting.
Fixes: 7a4522bbef ("tools: bpftool: add probes for /proc/ eBPF parameters")
Reported-by: Nicky Veitch <nicky.veitch@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230512113134.58996-1-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d9b41daa5 ]
If sock->service_name is NULL, the local variable
service_name_tlv_length will not be assigned by nfc_llcp_build_tlv(),
later leading to using value frmo the stack. Smatch warning:
net/nfc/llcp_commands.c:442 nfc_llcp_send_connect() error: uninitialized symbol 'service_name_tlv_length'.
Fixes: de9e5aeb4f ("NFC: llcp: Fix usage of llcp_add_tlv()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f34baf67e ]
n_bytes variable in the driver represents the number of bytes per word
that needs to be sent/copied to fifo. Bits/word can be between 8 and 32
bits from the client but in memory they are a power of 2, same is mentioned
in spi.h header:
"
* @bits_per_word: Data transfers involve one or more words; word sizes
* like eight or 12 bits are common. In-memory wordsizes are
* powers of two bytes (e.g. 20 bit samples use 32 bits).
* This may be changed by the device's driver, or left at the
* default (0) indicating protocol words are eight bit bytes.
* The spi_transfer.bits_per_word can override this for each transfer.
"
Hence, round of n_bytes to a power of 2 to avoid values like 3 which
would generate unalligned/odd accesses to memory/fifo.
* tested on Baikal-T1 based system with DW SPI-looped back interface
transferring a chunk of data with DFS:8,12,16.
Fixes: a51acc2400 ("spi: dw: Add support for 32-bits max xfer size")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com
Signed-off-by: Joy Chakraborty <joychakr@google.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com
Tested-by: Serge Semin <fancer.lancer@gmail.com
Link: https://lore.kernel.org/r/20230512104746.1797865-4-joychakr@google.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29ebbba7d4 ]
With the way the hooks implemented right now, we have a special
condition: optval larger than PAGE_SIZE will expose only first 4k into
BPF; any modifications to the optval are ignored. If the BPF program
doesn't handle this condition by resetting optlen to 0,
the userspace will get EFAULT.
The intention of the EFAULT was to make it apparent to the
developers that the program is doing something wrong.
However, this inadvertently might affect production workloads
with the BPF programs that are not too careful (i.e., returning EFAULT
for perfectly valid setsockopt/getsockopt calls).
Let's try to minimize the chance of BPF program screwing up userspace
by ignoring the output of those BPF programs (instead of returning
EFAULT to the userspace). pr_info_once those cases to
the dmesg to help with figuring out what's going wrong.
Fixes: 0d01da6afc ("bpf: implement getsockopt and setsockopt hooks")
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230511170456.1759459-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdeeed3498 ]
It seems like __builtin_offset() doesn't preserve CO-RE field
relocations properly. So if offsetof() macro is defined through
__builtin_offset(), CO-RE-enabled BPF code using container_of() will be
subtly and silently broken.
To avoid this problem, redefine offsetof() and container_of() in the
form that works with CO-RE relocations more reliably.
Fixes: 5fbc220862 ("tools/libpf: Add offsetof/container_of macro in bpf_helpers.h")
Reported-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230509065502.2306180-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ce4bb0912 ]
Mandatory WFA testcase
CT_Security_WPA2Personal_STA_RSNEBoundsVerification-AbsentRSNCap,
performs bounds verfication on Beacon and/or Probe response frames. It
failed and observed the reason to be absence of cipher suite and AKM
suite in RSN information. To fix this, enable the RSN flag before extracting RSN
capabilities.
Fixes: cd21d99e59 ("wifi: wilc1000: validate pairwise and authentication suite offsets")
Signed-off-by: Amisha Patel <amisha.patel@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230421181005.4865-1-amisha.patel@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c39028b333 ]
The btf_dump/struct_data selftest is failing with:
[...]
test_btf_dump_struct_data:FAIL:unexpected return value dumping fs_context unexpected unexpected return value dumping fs_context: actual -7 != expected 264
[...]
The reason is in btf_dump_type_data_check_overflow(). It does not use
BTF_MEMBER_BITFIELD_SIZE from the struct's member (btf_member). Instead,
it is using the enum size which is 4. It had been working till the recent
commit 4e04143c86 ("fs_context: drop the unused lsm_flags member")
removed an integer member which also removed the 4 bytes padding at the
end of the fs_context. Missing this 4 bytes padding exposed this bug. In
particular, when btf_dump_type_data_check_overflow() reaches the member
'phase', -E2BIG is returned.
The fix is to pass bit_sz to btf_dump_type_data_check_overflow(). In
btf_dump_type_data_check_overflow(), it does a different size check when
bit_sz is not zero.
The current fs_context:
[3600] ENUM 'fs_context_purpose' encoding=UNSIGNED size=4 vlen=3
'FS_CONTEXT_FOR_MOUNT' val=0
'FS_CONTEXT_FOR_SUBMOUNT' val=1
'FS_CONTEXT_FOR_RECONFIGURE' val=2
[3601] ENUM 'fs_context_phase' encoding=UNSIGNED size=4 vlen=7
'FS_CONTEXT_CREATE_PARAMS' val=0
'FS_CONTEXT_CREATING' val=1
'FS_CONTEXT_AWAITING_MOUNT' val=2
'FS_CONTEXT_AWAITING_RECONF' val=3
'FS_CONTEXT_RECONF_PARAMS' val=4
'FS_CONTEXT_RECONFIGURING' val=5
'FS_CONTEXT_FAILED' val=6
[3602] STRUCT 'fs_context' size=264 vlen=21
'ops' type_id=3603 bits_offset=0
'uapi_mutex' type_id=235 bits_offset=64
'fs_type' type_id=872 bits_offset=1216
'fs_private' type_id=21 bits_offset=1280
'sget_key' type_id=21 bits_offset=1344
'root' type_id=781 bits_offset=1408
'user_ns' type_id=251 bits_offset=1472
'net_ns' type_id=984 bits_offset=1536
'cred' type_id=1785 bits_offset=1600
'log' type_id=3621 bits_offset=1664
'source' type_id=42 bits_offset=1792
'security' type_id=21 bits_offset=1856
's_fs_info' type_id=21 bits_offset=1920
'sb_flags' type_id=20 bits_offset=1984
'sb_flags_mask' type_id=20 bits_offset=2016
's_iflags' type_id=20 bits_offset=2048
'purpose' type_id=3600 bits_offset=2080 bitfield_size=8
'phase' type_id=3601 bits_offset=2088 bitfield_size=8
'need_free' type_id=67 bits_offset=2096 bitfield_size=1
'global' type_id=67 bits_offset=2097 bitfield_size=1
'oldapi' type_id=67 bits_offset=2098 bitfield_size=1
Fixes: 920d16af9b ("libbpf: BTF dumper support for typed data")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230428013638.1581263-1-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f24292e827 ]
For the reasons also described in commit b383e8abed ("wifi: ath9k: avoid
uninit memory read in ath9k_htc_rx_msg()"), ath9k_htc_rx_msg() should
validate pkt_len before accessing the SKB.
For example, the obtained SKB may have been badly constructed with
pkt_len = 8. In this case, the SKB can only contain a valid htc_frame_hdr
but after being processed in ath9k_htc_rx_msg() and passed to
ath9k_wmi_ctrl_rx() endpoint RX handler, it is expected to have a WMI
command header which should be located inside its data payload.
Implement sanity checking inside ath9k_wmi_ctrl_rx(). Otherwise, uninit
memory can be referenced.
Tested on Qualcomm Atheros Communications AR9271 802.11n .
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Reported-and-tested-by: syzbot+f2cb6e0ffdb961921e4d@syzkaller.appspotmail.com
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230424183348.111355-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84214ab468 ]
When function igc_rx_hash() was introduced in v4.20 via commit 0507ef8a03
("igc: Add transmit and receive fastpath and interrupt handlers"), the
hardware wasn't configured to provide RSS hash, thus it made sense to not
enable net_device NETIF_F_RXHASH feature bit.
The NIC hardware was configured to enable RSS hash info in v5.2 via commit
2121c2712f ("igc: Add multiple receive queues control supporting"), but
forgot to set the NETIF_F_RXHASH feature bit.
The original implementation of igc_rx_hash() didn't extract the associated
pkt_hash_type, but statically set PKT_HASH_TYPE_L3. The largest portions of
this patch are about extracting the RSS Type from the hardware and mapping
this to enum pkt_hash_types. This was based on Foxville i225 software user
manual rev-1.3.1 and tested on Intel Ethernet Controller I225-LM (rev 03).
For UDP it's worth noting that RSS (type) hashing have been disabled both for
IPv4 and IPv6 (see IGC_MRQC_RSS_FIELD_IPV4_UDP + IGC_MRQC_RSS_FIELD_IPV6_UDP)
because hardware RSS doesn't handle fragmented pkts well when enabled (can
cause out-of-order). This results in PKT_HASH_TYPE_L3 for UDP packets, and
hash value doesn't include UDP port numbers. Not being PKT_HASH_TYPE_L4, have
the effect that netstack will do a software based hash calc calling into
flow_dissect, but only when code calls skb_get_hash(), which doesn't
necessary happen for local delivery.
For QA verification testing I wrote a small bpftrace prog:
[0] https://github.com/xdp-project/xdp-project/blob/master/areas/hints/monitor_skb_hash_on_dev.bt
Fixes: 2121c2712f ("igc: Add multiple receive queues control supporting")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Yoong Siang <yoong.siang.song@intel.com>
Link: https://lore.kernel.org/bpf/168182464270.616355.11391652654430626584.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dda5f312bb ]
The sync_*() ops on arch/arm are defined in terms of the regular bitops
with no special handling. This is not correct, as UP kernels elide
barriers for the fully-ordered operations, and so the required ordering
is lost when such UP kernels are run under a hypervsior on an SMP
system.
Fix this by defining sync ops with the required barriers.
Note: On 32-bit arm, the sync_*() ops are currently only used by Xen,
which requires ARMv7, but the semantics can be implemented for ARMv6+.
Fixes: e54d2f6152 ("xen/arm: sync_bitops")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-2-mark.rutland@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f88130e8a ]
Normally __swp_entry_to_pte() is never called with a value translating
to a valid PTE. The only known exception is pte_swap_tests(), resulting
in a WARN splat in Xen PV guests, as __pte_to_swp_entry() did
translate the PFN of the valid PTE to a guest local PFN, while
__swp_entry_to_pte() doesn't do the opposite translation.
Fix that by using __pte() in __swp_entry_to_pte() instead of open
coding the native variant of it.
For correctness do the similar conversion for __swp_entry_to_pmd().
Fixes: 05289402d7 ("mm/debug_vm_pgtable: add tests validating arch helpers for core MM features")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230306123259.12461-1-jgross@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fad201fe3 ]
Although, IBS pmus can be invoked via their own interface, indirect
IBS invocation via core pmu events is also supported with fixed set
of events: cpu-cycles:p, r076:p (same as cpu-cycles:p) and r0C1:p
(micro-ops) for user convenience.
This indirect IBS invocation is broken since commit 66d258c5b0
("perf/core: Optimize perf_init_event()"), which added RAW pmu under
'pmu_idr' list and thus if event_init() fails with RAW pmu, it started
returning error instead of trying other pmus.
Forward precise events from core pmu to IBS by overwriting 'type' and
'config' in the kernel copy of perf_event_attr. Overwriting will cause
perf_init_event() to retry with updated 'type' and 'config', which will
automatically forward event to IBS pmu.
Without patch:
$ sudo ./perf record -C 0 -e r076:p -- sleep 1
Error:
The r076:p event is not supported.
With patch:
$ sudo ./perf record -C 0 -e r076:p -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.341 MB perf.data (37 samples) ]
Fixes: 66d258c5b0 ("perf/core: Optimize perf_init_event()")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230504110003.2548-3-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 375b9ff53c ]
In the unlikely case that CLOCK_REALTIME is not defined, variable ret is
not initialized and further accumulation of return values to ret can leave
ret in an undefined state. Fix this by initialized ret to zero and changing
the assignment of ret to an accumulation for the CLOCK_REALTIME case.
Fixes: 03f55c7952 ("kselftest: Extend vDSO selftest to clock_getres")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf5ddd7365 ]
This code-movement-only commit moves the rcu_scale_cleanup() and
rcu_scale_shutdown() functions to follow kfree_scale_cleanup().
This is code movement is in preparation for a bug-fix patch that invokes
kfree_scale_cleanup() from rcu_scale_cleanup().
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Stable-dep-of: 23fc8df26d ("rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef1ef3d476 ]
The rcu_scale_shutdown() and kfree_scale_shutdown() kthreads/functions
use wait_event() to wait for the rcuscale test to complete. However,
each updater thread in such a test waits for at least 100 grace periods.
If each grace period takes more than 1.2 seconds, which is long, but
not insanely so, this can trigger the hung-task timeout.
This commit therefore replaces those wait_event() calls with calls to
wait_event_idle(), which do not trigger the hung-task timeout.
Reported-by: kernel test robot <yujie.liu@intel.com>
Reported-by: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Stable-dep-of: 23fc8df26d ("rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b409afe026 ]
The BUSTED-BOOST and TREE03 scenarios specify a mythical tree.use_softirq
module parameter, which means a failure to get full test coverage. This
commit therefore corrects the name to rcutree.use_softirq.
Fixes: e2b949d543 ("rcutorture: Make TREE03 use real-time tree.use_softirq setting")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 401b0de3ae ]
The rcu_tasks_invoke_cbs() function relies on queue_work_on() to silently
fall back to WORK_CPU_UNBOUND when the specified CPU is offline. However,
the queue_work_on() function's silent fallback mechanism relies on that
CPU having been online at some time in the past. When queue_work_on()
is passed a CPU that has never been online, workqueue lockups ensue,
which can be bad for your kernel's general health and well-being.
This commit therefore checks whether a given CPU has ever been online,
and, if not substitutes WORK_CPU_UNBOUND in the subsequent call to
queue_work_on(). Why not simply omit the queue_work_on() call entirely?
Because this function is flooding callback-invocation notifications
to all CPUs, and must deal with possibilities that include a sparse
cpu_possible_mask.
This commit also moves the setting of the rcu_data structure's
->beenonline field to rcu_cpu_starting(), which executes on the
incoming CPU before that CPU has ever enabled interrupts. This ensures
that the required workqueues are present. In addition, because the
incoming CPU has not yet enabled its interrupts, there cannot yet have
been any softirq handlers running on this CPU, which means that the
WARN_ON_ONCE(!rdp->beenonline) within the RCU_SOFTIRQ handler cannot
have triggered yet.
Fixes: d363f833c6 ("rcu-tasks: Use workqueues for multiple rcu_tasks_invoke_cbs() invocations")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15d44dfa40 ]
Currently, rcu_cpu_starting() is written so that it might be invoked
with interrupts enabled. However, it is always called when interrupts
are disabled, either by rcu_init(), notify_cpu_starting(), or from a
call point prior to the call to notify_cpu_starting().
But why bother requiring that interrupts be disabled? The purpose is
to allow the rcu_data structure's ->beenonline flag to be set after all
early processing has completed for the incoming CPU, thus allowing this
flag to be used to determine when workqueues have been set up for the
incoming CPU, while still allowing this flag to be used as a diagnostic
within rcu_core().
This commit therefore makes rcu_cpu_starting() rely on interrupts being
disabled.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 401b0de3ae ("rcu-tasks: Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89382022b3 ]
Should an error occur after calling sun8i_ths_resource_init() in the probe
function, some resources need to be released, as already done in the
.remove() function.
Switch to the devm_clk_get_enabled() helper and add a new devm_action to
turn sun8i_ths_resource_init() into a fully managed function.
Move the place where reset_control_deassert() is called so that the
recommended order of reset release/clock enable steps is kept.
A64 manual states that:
3.3.6.4. Gating and reset
Make sure that the reset signal has been released before the release of
module clock gating;
This fixes the issue and removes some LoC at the same time.
Fixes: dccc5c3b6f ("thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/a8ae84bd2dc4b55fe428f8e20f31438bf8bb6762.1684089931.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f44ffb3d ]
If the intel_pstate driver is set to passive mode, then writing the
same value to the energy_performance_preference sysfs twice will fail.
This is caused by the wrong return value used (index of the matched
energy_perf_string), instead of the length of the passed in parameter.
Fix by forcing the internal return value to zero when the same
preference is passed in by user. This same issue is not present when
active mode is used for the driver.
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Niklas Neronin <niklas.neronin@intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b9c3ddcec ]
checker_stack_use_t32strd() and kprobe_handler() can be made static since
they are not used from other files, while coverage_start_registers()
and __kprobes_test_case() are used from assembler code, and just need
a declaration to avoid a warning with the global definition.
arch/arm/probes/kprobes/checkers-common.c:43:18: error: no previous prototype for 'checker_stack_use_t32strd'
arch/arm/probes/kprobes/core.c:236:16: error: no previous prototype for 'kprobe_handler'
arch/arm/probes/kprobes/test-core.c:723:10: error: no previous prototype for 'coverage_start_registers'
arch/arm/probes/kprobes/test-core.c:918:14: error: no previous prototype for '__kprobes_test_case_start'
arch/arm/probes/kprobes/test-core.c:952:14: error: no previous prototype for '__kprobes_test_case_end_16'
arch/arm/probes/kprobes/test-core.c:967:14: error: no previous prototype for '__kprobes_test_case_end_32'
Fixes: 6624cf651f ("ARM: kprobes: collects stack consumption for store instructions")
Fixes: 454f3e132d ("ARM/kprobes: Remove jprobe arm implementation")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4384a70c88 ]
Commit f38d1a6d00 ("PM: domains: Allocate governor data dynamically
based on a genpd governor") started to use the in-parameters in
genpd_add_device(), without first doing a verification of them.
This isn't really a big problem, as most callers do a verification already.
Therefore, let's drop the verification from genpd_add_device() and make
sure all the callers take care of it instead.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: f38d1a6d00 ("PM: domains: Allocate governor data dynamically based on a genpd governor")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4658fe81b3 ]
After commit 3382388d71 ("intel_rapl: abstract RAPL common code"),
accessing to IOSF_MBI interface is done in the RAPL common code.
Thus it is the CONFIG_INTEL_RAPL_CORE that has dependency of
CONFIG_IOSF_MBI, while CONFIG_INTEL_RAPL_MSR does not.
This problem was not exposed previously because all the previous RAPL
common code users, aka, the RAPL MSR and MMIO I/F drivers, have
CONFIG_IOSF_MBI selected.
Fix the CONFIG_IOSF_MBI dependency in RAPL code. This also fixes a build
time failure when the RAPL TPMI I/F driver is introduced without
selecting CONFIG_IOSF_MBI.
x86_64-linux-ld: vmlinux.o: in function `set_floor_freq_atom':
intel_rapl_common.c:(.text+0x2dac9b8): undefined reference to `iosf_mbi_write'
x86_64-linux-ld: intel_rapl_common.c:(.text+0x2daca66): undefined reference to `iosf_mbi_read'
Reference to iosf_mbi.h is also removed from the RAPL MSR I/F driver.
Fixes: 3382388d71 ("intel_rapl: abstract RAPL common code")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20230601213246.3271412-1-arnd@kernel.org
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a6a9f1c5a ]
The driver needs to migrate the perf context if the current using CPU going
to teardown. By the time calling the cpuhp::teardown() callback the
cpu_online_mask() hasn't updated yet and still includes the CPU going to
teardown. In current driver's implementation we may migrate the context
to the teardown CPU and leads to the below calltrace:
...
[ 368.104662][ T932] task:cpuhp/0 state:D stack: 0 pid: 15 ppid: 2 flags:0x00000008
[ 368.113699][ T932] Call trace:
[ 368.116834][ T932] __switch_to+0x7c/0xbc
[ 368.120924][ T932] __schedule+0x338/0x6f0
[ 368.125098][ T932] schedule+0x50/0xe0
[ 368.128926][ T932] schedule_preempt_disabled+0x18/0x24
[ 368.134229][ T932] __mutex_lock.constprop.0+0x1d4/0x5dc
[ 368.139617][ T932] __mutex_lock_slowpath+0x1c/0x30
[ 368.144573][ T932] mutex_lock+0x50/0x60
[ 368.148579][ T932] perf_pmu_migrate_context+0x84/0x2b0
[ 368.153884][ T932] hisi_pcie_pmu_offline_cpu+0x90/0xe0 [hisi_pcie_pmu]
[ 368.160579][ T932] cpuhp_invoke_callback+0x2a0/0x650
[ 368.165707][ T932] cpuhp_thread_fun+0xe4/0x190
[ 368.170316][ T932] smpboot_thread_fn+0x15c/0x1a0
[ 368.175099][ T932] kthread+0x108/0x13c
[ 368.179012][ T932] ret_from_fork+0x10/0x18
...
Use function cpumask_any_but() to find one correct active cpu to fixes
this issue.
Fixes: 8404b0fbc7 ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230608114326.27649-1-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 195edce08b ]
tl;dr: There is a race in the TDX private<=>shared conversion code
which could kill the TDX guest. Fix it by changing conversion
ordering to eliminate the window.
TDX hardware maintains metadata to track which pages are private and
shared. Additionally, TDX guests use the guest x86 page tables to
specify whether a given mapping is intended to be private or shared.
Bad things happen when the intent and metadata do not match.
So there are two thing in play:
1. "the page" -- the physical TDX page metadata
2. "the mapping" -- the guest-controlled x86 page table intent
For instance, an unrecoverable exit to VMM occurs if a guest touches a
private mapping that points to a shared physical page.
In summary:
* Private mapping => Private Page == OK (obviously)
* Shared mapping => Shared Page == OK (obviously)
* Private mapping => Shared Page == BIG BOOM!
* Shared mapping => Private Page == OK-ish
(It will read generate a recoverable #VE via handle_mmio())
Enter load_unaligned_zeropad(). It can touch memory that is adjacent but
otherwise unrelated to the memory it needs to touch. It will cause one
of those unrecoverable exits (aka. BIG BOOM) if it blunders into a
shared mapping pointing to a private page.
This is a problem when __set_memory_enc_pgtable() converts pages from
shared to private. It first changes the mapping and second modifies
the TDX page metadata. It's moving from:
* Shared mapping => Shared Page == OK
to:
* Private mapping => Shared Page == BIG BOOM!
This means that there is a window with a shared mapping pointing to a
private page where load_unaligned_zeropad() can strike.
Add a TDX handler for guest.enc_status_change_prepare(). This converts
the page from shared to private *before* the page becomes private. This
ensures that there is never a private mapping to a shared page.
Leave a guest.enc_status_change_finish() in place but only use it for
private=>shared conversions. This will delay updating the TDX metadata
marking the page private until *after* the mapping matches the metadata.
This also ensures that there is never a private mapping to a shared page.
[ dhansen: rewrite changelog ]
Fixes: 7dbde76316 ("x86/mm/cpa: Add support for TDX shared memory")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/all/20230606095622.1939-3-kirill.shutemov%40linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
