commit fb620ae73b upstream.
The irq_raised completion used to detect the end of a test case is
initialized when the test device is probed, but never reinitialized again
before a test case. As a result, the irq_raised completion synchronization
is effective only for the first ioctl test case executed. Any subsequent
call to wait_for_completion() by another ioctl() call will immediately
return, potentially too early, leading to false positive failures.
Fix this by reinitializing the irq_raised completion before starting a new
ioctl() test command.
Link: https://lore.kernel.org/r/20230415023542.77601-16-dlemoal@kernel.org
Fixes: 2c156ac71c ("misc: Add host side PCI driver for PCI test function device")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9dd3c7c4c8 upstream.
The RK3399 PCIe controller should wait until the PHY PLLs are locked.
Add poll and timeout to wait for PHY PLLs to be locked. If they cannot
be locked generate error message and jump to error handler. Accessing
registers in the PHY clock domain when PLLs are not locked causes hang
The PHY PLLs status is checked through a side channel register.
This is documented in the TRM section 17.5.8.1 "PCIe Initialization
Sequence".
Link: https://lore.kernel.org/r/20230418074700.1083505-5-rick.wertenbroek@gmail.com
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11509910c5 upstream.
In jfs_dmap.c at line 381, BLKTODMAP is used to get a logical block
number inside dbFree(). db_l2nbperpage, which is the log2 number of
blocks per page, is passed as an argument to BLKTODMAP which uses it
for shifting.
Syzbot reported a shift out-of-bounds crash because db_l2nbperpage is
too big. This happens because the large value is set without any
validation in dbMount() at line 181.
Thus, make sure that db_l2nbperpage is correct while mounting.
Max number of blocks per page = Page size / Min block size
=> log2(Max num_block per page) = log2(Page size / Min block size)
= log2(Page size) - log2(Min block size)
=> Max db_l2nbperpage = L2PSIZE - L2MINBLOCKSIZE
Reported-and-tested-by: syzbot+d2cd27dcf8e04b232eb2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=2a70a453331db32ed491f5cbb07e81bf2d225715
Cc: stable@vger.kernel.org
Suggested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de25d6e961 upstream.
In our fault injection test, we create an ext4 file, migrate it to
non-extent based file, then punch a hole and finally trigger a WARN_ON
in the ext4_da_update_reserve_space():
EXT4-fs warning (device sda): ext4_da_update_reserve_space:369:
ino 14, used 11 with only 10 reserved data blocks
When writing back a non-extent based file, if we enable delalloc, the
number of reserved blocks will be subtracted from the number of blocks
mapped by ext4_ind_map_blocks(), and the extent status tree will be
updated. We update the extent status tree by first removing the old
extent_status and then inserting the new extent_status. If the block range
we remove happens to be in an extent, then we need to allocate another
extent_status with ext4_es_alloc_extent().
use old to remove to add new
|----------|------------|------------|
old extent_status
The problem is that the allocation of a new extent_status failed due to a
fault injection, and __es_shrink() did not get free memory, resulting in
a return of -ENOMEM. Then do_writepages() retries after receiving -ENOMEM,
we map to the same extent again, and the number of reserved blocks is again
subtracted from the number of blocks in that extent. Since the blocks in
the same extent are subtracted twice, we end up triggering WARN_ON at
ext4_da_update_reserve_space() because used > ei->i_reserved_data_blocks.
For non-extent based file, we update the number of reserved blocks after
ext4_ind_map_blocks() is executed, which causes a problem that when we call
ext4_ind_map_blocks() to create a block, it doesn't always create a block,
but we always reduce the number of reserved blocks. So we move the logic
for updating reserved blocks to ext4_ind_map_blocks() to ensure that the
number of reserved blocks is updated only after we do succeed in allocating
some new blocks.
Fixes: 5f634d064c ("ext4: Fix quota accounting error with fallocate")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 001b8ccd06 upstream.
In compact 4B, two adjacent lclusters are packed together as a unit to
form on-disk indexes for effective random access, as below:
(amortized = 4, vcnt = 2)
_____________________________________________
|___@_____ encoded bits __________|_ blkaddr _|
0 . amortized * vcnt = 8
. .
. . amortized * vcnt - 4 = 4
. .
.____________________________.
|_type (2 bits)_|_clusterofs_|
Therefore, encoded bits for each pack are 32 bits (4 bytes). IOWs,
since each lcluster can get 16 bits for its type and clusterofs, the
maximum supported lclustersize for compact 4B format is 16k (14 bits).
Fix this to enable compact 4B format for 16k lclusters (blocks), which
is tested on an arm64 server with 16k page size.
Fixes: 152a333a58 ("staging: erofs: add compacted compression indexes support")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230601112341.56960-1-hsiangkao@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc80fc2d4e upstream.
After the listener svc_sock is freed, and before invoking svc_tcp_accept()
for the established child sock, there is a window that the newsock
retaining a freed listener svc_sock in sk_user_data which cloning from
parent. In the race window, if data is received on the newsock, we will
observe use-after-free report in svc_tcp_listen_data_ready().
Reproduce by two tasks:
1. while :; do rpc.nfsd 0 ; rpc.nfsd; done
2. while :; do echo "" | ncat -4 127.0.0.1 2049 ; done
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
Read of size 8 at addr ffff888139d96228 by task nc/102553
CPU: 7 PID: 102553 Comm: nc Not tainted 6.3.0+ #18
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<IRQ>
dump_stack_lvl+0x33/0x50
print_address_description.constprop.0+0x27/0x310
print_report+0x3e/0x70
kasan_report+0xae/0xe0
svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
tcp_data_queue+0x9f4/0x20e0
tcp_rcv_established+0x666/0x1f60
tcp_v4_do_rcv+0x51c/0x850
tcp_v4_rcv+0x23fc/0x2e80
ip_protocol_deliver_rcu+0x62/0x300
ip_local_deliver_finish+0x267/0x350
ip_local_deliver+0x18b/0x2d0
ip_rcv+0x2fb/0x370
__netif_receive_skb_one_core+0x166/0x1b0
process_backlog+0x24c/0x5e0
__napi_poll+0xa2/0x500
net_rx_action+0x854/0xc90
__do_softirq+0x1bb/0x5de
do_softirq+0xcb/0x100
</IRQ>
<TASK>
...
</TASK>
Allocated by task 102371:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7b/0x90
svc_setup_socket+0x52/0x4f0 [sunrpc]
svc_addsock+0x20d/0x400 [sunrpc]
__write_ports_addfd+0x209/0x390 [nfsd]
write_ports+0x239/0x2c0 [nfsd]
nfsctl_transaction_write+0xac/0x110 [nfsd]
vfs_write+0x1c3/0xae0
ksys_write+0xed/0x1c0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 102551:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x106/0x190
__kmem_cache_free+0x133/0x270
svc_xprt_free+0x1e2/0x350 [sunrpc]
svc_xprt_destroy_all+0x25a/0x440 [sunrpc]
nfsd_put+0x125/0x240 [nfsd]
nfsd_svc+0x2cb/0x3c0 [nfsd]
write_threads+0x1ac/0x2a0 [nfsd]
nfsctl_transaction_write+0xac/0x110 [nfsd]
vfs_write+0x1c3/0xae0
ksys_write+0xed/0x1c0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fix the UAF by simply doing nothing in svc_tcp_listen_data_ready()
if state != TCP_LISTEN, that will avoid dereferencing svsk for all
child socket.
Link: https://lore.kernel.org/lkml/20230507091131.23540-1-dinghui@sangfor.com.cn/
Fixes: fa9251afc3 ("SUNRPC: Call the default socket callbacks instead of open coding")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b4e32df3e upstream.
A process can spawn a PD on DSP with some attributes that can be
associated with the PD during spawn and run. The invocation
corresponding to the create request with attributes has total
4 buffers at the DSP side implementation. If this number is not
correct, the invocation is expected to fail on DSP. Added change
to use correct number of buffer count for creating fastrpc scalar.
Fixes: d73f71c7c6 ("misc: fastrpc: Add support for create remote init process")
Cc: stable <stable@kernel.org>
Tested-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Message-ID: <1686743685-21715-1-git-send-email-quic_ekangupt@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4032d615f upstream.
/dev/vtpmx is made visible before 'workqueue' is initialized, which can
lead to a memory corruption in the worst case scenario.
Address this by initializing 'workqueue' as the very first step of the
driver initialization.
Cc: stable@vger.kernel.org
Fixes: 6f99612e25 ("tpm: Proxy driver for supporting multiple emulated TPMs")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@tuni.fi>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 968ab92616 upstream.
commit 4e5a04be88 ("pinctrl: amd: disable and mask interrupts on probe")
had a mistake in loop iteration 63 that it would clear offset 0xFC instead
of 0x100. Offset 0xFC is actually `WAKE_INT_MASTER_REG`. This was
clearing bits 13 and 15 from the register which significantly changed the
expected handling for some platforms for GPIO0.
commit b26cd9325b ("pinctrl: amd: Disable and mask interrupts on resume")
actually fixed this bug, but lead to regressions on Lenovo Z13 and some
other systems. This is because there was no handling in the driver for bit
15 debounce behavior.
Quoting a public BKDG:
```
EnWinBlueBtn. Read-write. Reset: 0. 0=GPIO0 detect debounced power button;
Power button override is 4 seconds. 1=GPIO0 detect debounced power button
in S3/S5/S0i3, and detect "pressed less than 2 seconds" and "pressed 2~10
seconds" in S0; Power button override is 10 seconds
```
Cross referencing the same master register in Windows it's obvious that
Windows doesn't use debounce values in this configuration. So align the
Linux driver to do this as well. This fixes wake on lid when
WAKE_INT_MASTER_REG is properly programmed.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217315
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230421120625.3366-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d3f87278bc ]
The kernel does not currently validate that both the minimum and maximum
ports of a port range are specified. This can lead user space to think
that a filter matching on a port range was successfully added, when in
fact it was not. For example, with a patched (buggy) iproute2 that only
sends the minimum port, the following commands do not return an error:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
# tc filter show dev swp1 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
filter protocol ip pref 1 flower chain 0 handle 0x2
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 2 ref 1 bind 1
Fix by returning an error unless both ports are specified:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
Error: Both min and max source ports must be specified.
We have an error talking to the kernel
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
Error: Both min and max destination ports must be specified.
We have an error talking to the kernel
Fixes: 5c72299fba ("net: sched: cls_flower: Classify packets using port ranges")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd7d4c1281 ]
Pass extack down to fl_set_key_port_range() and set message on error.
Both the min and max ports would qualify as invalid attributes here.
Report the min one as invalid, as it's probably what makes the most
sense from a user point of view.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d3f87278bc ("net/sched: flower: Ensure both minimum and maximum ports are specified")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8191213a58 ]
z_erofs_do_read_page() may loop infinitely due to the inappropriate
truncation in the below statement. Since the offset is 64 bits and min_t()
truncates the result to 32 bits. The solution is to replace unsigned int
with a 64-bit type, such as erofs_off_t.
cur = end - min_t(unsigned int, offset + end - map->m_la, end);
- For example:
- offset = 0x400160000
- end = 0x370
- map->m_la = 0x160370
- offset + end - map->m_la = 0x400000000
- offset + end - map->m_la = 0x00000000 (truncated as unsigned int)
- Expected result:
- cur = 0
- Actual result:
- cur = 0x370
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Fixes: 3883a79abd ("staging: erofs: introduce VLE decompression support")
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230710093410.44071-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 028e6e204a ]
The while-loop may break on one of the two conditions, either ID string
is empty or GUID matches. The second one, may never be reached if the
parsed string is not correct GUID. In such a case the loop will never
advance to check the next ID.
Break possible infinite loop by factoring out guid_parse_and_compare()
helper which may be moved to the generic header for everyone later on
and preventing from similar mistake in the future.
Interestingly that firstly it appeared when WMI was turned into a bus
driver, but later when duplicated GUIDs were checked, the while-loop
has been replaced by for-loop and hence no mistake made again.
Fixes: a48e23385f ("platform/x86: wmi: add context pointer field to struct wmi_device_id")
Fixes: 844af950da ("platform/x86: wmi: Turn WMI into a bus driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230621151155.78279-1-andriy.shevchenko@linux.intel.com
Tested-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6701cc8f70 ]
There is no need to split lines as they perfectly fit 80 character limit.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 028e6e204a ("platform/x86: wmi: Break possible infinite loop when parsing GUID")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9dffc1417 ]
There are types and helpers that are redefined with old names.
Convert the WMI library to use those types and helpers directly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 028e6e204a ("platform/x86: wmi: Break possible infinite loop when parsing GUID")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06a0716949 ]
Now in addrconf_mod_rs_timer(), reference idev depends on whether
rs_timer is not pending. Then modify rs_timer timeout.
There is a time gap in [1], during which if the pending rs_timer
becomes not pending. It will miss to hold idev, but the rs_timer
is activated. Thus rs_timer callback function addrconf_rs_timer()
will be executed and put idev later without holding idev. A refcount
underflow issue for idev can be caused by this.
if (!timer_pending(&idev->rs_timer))
in6_dev_hold(idev);
<--------------[1]
mod_timer(&idev->rs_timer, jiffies + when);
To fix the issue, hold idev if mod_timer() return 0.
Fixes: b7b1bfce0b ("ipv6: split duplicate address detection and router solicitation timer")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2790143f09 ]
As the devm_kcalloc may return NULL pointer,
it should be better to add check for the return
value, as same as the others.
Fixes: 7f46c8b3a5 ("NTB: ntb_tool: Add full multi-port NTB API support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8623ccbfc5 ]
If device_register() returns error, the name allocated by
dev_set_name() need be freed. As comment of device_register()
says, it should use put_device() to give up the reference in
the error path. So fix this by calling put_device(), then the
name can be freed in kobject_cleanup(), and client_dev is freed
in ntb_transport_client_release().
Fixes: fce8a7bb5b ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c3c796aca ]
A problem about ntb_hw_intel create debugfs failed is triggered with the
following log given:
[ 273.112733] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0
[ 273.115342] debugfs: Directory 'ntb_hw_intel' with parent '/' already present!
The reason is that intel_ntb_pci_driver_init() returns
pci_register_driver() directly without checking its return value, if
pci_register_driver() failed, it returns without destroy the newly created
debugfs, resulting the debugfs of ntb_hw_intel can never be created later.
intel_ntb_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98af0a33c1 ]
A problem about ntb_hw_amd create debugfs failed is triggered with the
following log given:
[ 618.431232] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0
[ 618.433284] debugfs: Directory 'ntb_hw_amd' with parent '/' already present!
The reason is that amd_ntb_pci_driver_init() returns pci_register_driver()
directly without checking its return value, if pci_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ntb_hw_amd can never be created later.
amd_ntb_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: a1b3695820 ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c012968259 ]
A problem about ntb_hw_idt create debugfs failed is triggered with the
following log given:
[ 1236.637636] IDT PCI-E Non-Transparent Bridge Driver 2.0
[ 1236.639292] debugfs: Directory 'ntb_hw_idt' with parent '/' already present!
The reason is that idt_pci_driver_init() returns pci_register_driver()
directly without checking its return value, if pci_register_driver()
failed, it returns without destroy the newly created debugfs, resulting
the debugfs of ntb_hw_idt can never be created later.
idt_pci_driver_init()
debugfs_create_dir() # create debugfs directory
pci_register_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without destroy debugfs directory
Fix by removing debugfs when pci_register_driver() returns error.
Fixes: bf2a952d31 ("NTB: Add IDT 89HPESxNTx PCIe-switches support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abfb2a58a5 ]
Remove unnecessary early code development check and the WARN_ON
that it uses. The irq alloc and free paths have long been
cleaned up and this check shouldn't have stuck around so long.
Fixes: 77ceb68e29 ("ionic: Add notifyq support")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36ac2c5092 ]
Change the ionic_intr_free parameter from struct ionic_lif to
struct ionic since that's what it actually cares about.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: abfb2a58a5 ("ionic: remove WARN_ON to prevent panic_on_warn")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b0641009b ]
Move the irq request and free out of the qcq_init and deinit
and into the alloc and free routines where they belong for
better resource management.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: abfb2a58a5 ("ionic: remove WARN_ON to prevent panic_on_warn")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9c17d39d5 ]
Add a little more cleanup when tearing down the queues.
Fixes: 1d062b7b6f ("ionic: Add basic adminq support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: abfb2a58a5 ("ionic: remove WARN_ON to prevent panic_on_warn")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7f55b81f2 ]
Spreading the interrupts across the CPU cores is good for load
balancing, but not necessarily as good when using a CPU/core
that is not part of the NUMA local CPU. If it can be localized,
the kernel's cpumask_local_spread() service will pick a core
that is on the node close to the PCI device.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: abfb2a58a5 ("ionic: remove WARN_ON to prevent panic_on_warn")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0323bce598 ]
In the event of a failure in tcf_change_indev(), fw_set_parms() will
immediately return an error after incrementing or decrementing
reference counter in tcf_bind_filter(). If attacker can control
reference counter to zero and make reference freed, leading to
use after free.
In order to prevent this, move the point of possible failure above the
point where the TC_FW_CLASSID is handled.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: M A Ramdhan <ramdhan@starlabs.sg>
Signed-off-by: M A Ramdhan <ramdhan@starlabs.sg>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Message-ID: <20230705161530.52003-1-ramdhan@starlabs.sg>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
