[ Upstream commit 9ca30a1b007d5fefb5752428f852a2d8d7219c1c ]
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Fixes: 79d561c4ec04 ("ALSA: usb-audio: Add mixer quirk for Sony DualSense PS5")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250612060228.1518028-1-nichen@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79d561c4ec0497669f19a9550cfb74812f60938b ]
The Sony DualSense wireless controller (PS5) features an internal mono
speaker, but it also provides a 3.5mm jack socket for headphone output
and headset microphone input.
Since this is a UAC1 device, it doesn't advertise any jack detection
capability. However, the controller is able to report HP & MIC insert
events via HID, i.e. through a dedicated input device managed by the
hid-playstation driver.
Add a quirk to create the jack controls for headphone and headset mic,
respectively, and setup an input handler for each of them in order to
intercept the related hotplug events.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250526-dualsense-alsa-jack-v1-9-1a821463b632@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cea7425595697802e8d55a322a251999554b8b1 ]
Adding a memory barrier before wake_up() in
snd_usb_soundblaster_remote_complete() is supposed to ensure the write
to mixer->rc_code is visible in wait_event_interruptible() from
snd_usb_sbrc_hwdep_read().
However, this is not really necessary, since wake_up() is just a wrapper
over __wake_up() which already executes a full memory barrier before
accessing the state of the task to be waken up.
Drop the redundant call to wmb() and implicitly fix the checkpatch
complaint:
WARNING: memory barrier without comment
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250526-dualsense-alsa-jack-v1-8-1a821463b632@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 853a57ba263adfecf4430b936d6862bc475b4bb5 ]
In kernel v6.5, several functions were added to the cdev layer. This
required updating the default version of subsystem ABI up to 6, but
this requirement was overlooked.
This commit updates the version accordingly.
Fixes: 6add87e976 ("firewire: cdev: add new version of ABI to notify time stamp at request/response subaction of transaction#")
Link: https://lore.kernel.org/r/20250920025148.163402-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cb782ff3c62c837e4984b6ae9f5d9a423cd5088 ]
Previous checks incorrectly tested the DMA addresses (dma_handle) for
NULL. Since dma_alloc_coherent() returns the CPU (virtual) address, the
NULL check should be performed on the *_base_addr pointer to correctly
detect allocation failures.
Update the checks to validate sqe_base_addr and cqe_base_addr instead of
sqe_dma_addr and cqe_dma_addr.
Fixes: 4682abfae2 ("scsi: ufs: core: mcq: Allocate memory for MCQ mode")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert commit ce8da5d13d which is commit
7e49538288e523427beedd26993d446afef1a6fb upstream.
This reverts commit ce8da5d13d ("loop: Avoid updating block size under
exclusive owner") for the 6.6 kernel, because if the LTP ioctl_loop06 test is
run with this patch in place, the test will fail, it leaves the host unable to
kexec into the kernel again (hangs forever) and "losetup -a" will hang on
attempting to access the /dev/loopN device that the test has set up.
The patch doesn't need to be reverted from 6.12, as it works fine there.
Cc: stable@vger.kernel.org # 6.6.x
Signed-off-by: Eric Hagberg <ehagberg@janestreet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4477b39c32fdc03363affef4b11d48391e6dc9ff ]
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 017fa3e89187848fd056af757769c9e66ac3e93d ]
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3a7e02c040b130b5545e4b115aada7bacd80a2b6 ]
The minmax infrastructure is overkill for simple constants, and can
cause huge expansions because those simple constants are then used by
other things.
For example, 'pageblock_order' is a core VM constant, but because it was
implemented using 'min_t()' and all the type-checking that involves, it
actually expanded to something like 2.5kB of preprocessor noise.
And when that simple constant was then used inside other expansions:
#define pageblock_nr_pages (1UL << pageblock_order)
#define pageblock_start_pfn(pfn) ALIGN_DOWN((pfn), pageblock_nr_pages)
and we then use that inside a 'max()' macro:
case ISOLATE_SUCCESS:
update_cached = false;
last_migrated_pfn = max(cc->zone->zone_start_pfn,
pageblock_start_pfn(cc->migrate_pfn - 1));
the end result was that one statement expanding to 253kB in size.
There are probably other cases of this, but this one case certainly
stood out.
I've added 'MIN_T()' and 'MAX_T()' macros for this kind of "core simple
constant with specific type" use. These macros skip the type checking,
and as such need to be very sparingly used only for obvious cases that
have active issues like this.
Reported-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/36aa2cad-1db1-4abf-8dd2-fb20484aabc3@lucifer.local/
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f755be0b1ff429a2ecf709beeb1bcd7abc111c2b ]
When the MPTCP DATA FIN have been ACKed, there is no more MPTCP related
metadata to exchange, and all subflows can be safely shutdown.
Before this patch, the subflows were actually terminated at 'close()'
time. That's certainly fine most of the time, but not when the userspace
'shutdown()' a connection, without close()ing it. When doing so, the
subflows were staying in LAST_ACK state on one side -- and consequently
in FIN_WAIT2 on the other side -- until the 'close()' of the MPTCP
socket.
Now, when the DATA FIN have been ACKed, all subflows are shutdown. A
consequence of this is that the TCP 'FIN' flag can be set earlier now,
but the end result is the same. This affects the packetdrill tests
looking at the end of the MPTCP connections, but for a good reason.
Note that tcp_shutdown() will check the subflow state, so no need to do
that again before calling it.
Fixes: 3721b9b646 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Cc: stable@vger.kernel.org
Fixes: 16a9a9da17 ("mptcp: Add helper to process acks of DATA_FIN")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-1-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When commit fa78e9b606a472495ef5b6b3d8b45c37f7727f9d upstream was
backported to LTS branches linux-6.12.y and linux-6.6.y, the SPI regmap
config fix got applied to the I2C regmap config. Most likely due to a new
RTC get/set parm feature introduced in 6.14 causing regmap config sections
in the buttom of the driver to move. LTS branch linux-6.1.y and earlier
does not have PCF2131 device support.
Issue can be seen in buttom of this diff in stable/linux.git tree:
git diff master..linux-6.12.y -- drivers/rtc/rtc-pcf2127.c
Fixes: ee61aec8529e ("rtc: pcf2127: fix SPI command byte for PCF2131")
Fixes: 5cdd1f7340 ("rtc: pcf2127: fix SPI command byte for PCF2131")
Cc: stable@vger.kernel.org
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Elena Popa <elena.popa@nxp.com>
Cc: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e56310b40fd2e7e0b9493da9ff488af145bdd0c ]
The AMD IOMMU host page table implementation supports dynamic page table levels
(up to 6 levels), starting with a 3-level configuration that expands based on
IOVA address. The kernel maintains a root pointer and current page table level
to enable proper page table walks in alloc_pte()/fetch_pte() operations.
The IOMMU IOVA allocator initially starts with 32-bit address and onces its
exhuasted it switches to 64-bit address (max address is determined based
on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU
driver increases page table level.
But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads
pgtable->[root/mode] without lock. So its possible that in exteme corner case,
when increase_address_space() is updating pgtable->[root/mode], fetch_pte()
reads wrong page table level (pgtable->mode). It does compare the value with
level encoded in page table and returns NULL. This will result is
iommu_unmap ops to fail and upper layer may retry/log WARN_ON.
CPU 0 CPU 1
------ ------
map pages unmap pages
alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte()
pgtable->root = pte (new root value)
READ pgtable->[mode/root]
Reads new root, old mode
Updates mode (pgtable->mode += 1)
Since Page table level updates are infrequent and already synchronized with a
spinlock, implement seqcount to enable lock-free read operations on the read path.
Fixes: 754265bcab ("iommu/amd: Fix race in increase_address_space()")
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: stable@vger.kernel.org
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
[ Adapted pgtable->mode and pgtable->root to use domain->iop.mode and domain->iop.root ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a5c98e8b1398534ae1feb6e95e2d3ee5215538ed ]
Pending requests will be flushed on disconnect, and the corresponding
TRBs will be turned into No-op TRBs, which are ignored by the xHC
controller once it starts processing the ring.
If the USB debug cable repeatedly disconnects before ring is started
then the ring will eventually be filled with No-op TRBs.
No new transfers can be queued when the ring is full, and driver will
print the following error message:
"xhci_hcd 0000:00:14.0: failed to queue trbs"
This is a normal case for 'in' transfers where TRBs are always enqueued
in advance, ready to take on incoming data. If no data arrives, and
device is disconnected, then ring dequeue will remain at beginning of
the ring while enqueue points to first free TRB after last cancelled
No-op TRB.
s
Solve this by reinitializing the rings when the debug cable disconnects
and DbC is leaving the configured state.
Clear the whole ring buffer and set enqueue and dequeue to the beginning
of ring, and set cycle bit to its initial state.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 220a0ffde02f962c13bc752b01aa570b8c65a37b ]
Decouple allocation of endpoint ring buffer from initialization
of the buffer, and initialization of endpoint context parts from
from the rest of the contexts.
It allows driver to clear up and reinitialize endpoint rings
after disconnect without reallocating everything.
This is a prerequisite for the next patch that prevents the transfer
ring from filling up with cancelled (no-op) TRBs if a debug cable is
reconnected several times without transferring anything.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 21bf6fc47a1e45031ba8a7084343b7cfd09ed1d3 ]
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20231009172923.2457844-15-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 64961557efa1 ("phy: ti: omap-usb2: fix device leak at unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24733e193a0d68f20d220e86da0362460c9aa812 upstream.
The previous commit adds the MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 flag. Make
sure it is correctly announced by the other peer when it has been
received.
pm_nl_ctl will now display 'deny_join_id0:1' when monitoring the events,
and when this flag was set by the other peer.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-3-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in userspace_pm.sh, because of a difference in the context,
introduced by commit c66fb480a330 ("selftests: userspace pm: avoid
relaunching pm events"), which is not in this version. The same lines
can still be added at the same place. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2293c57484ae64c9a3c847c8807db8c26a3a4d41 upstream.
During the connection establishment, a peer can tell the other one that
it cannot establish new subflows to the initial IP address and port by
setting the 'C' flag [1]. Doing so makes sense when the sender is behind
a strict NAT, operating behind a legacy Layer 4 load balancer, or using
anycast IP address for example.
When this 'C' flag is set, the path-managers must then not try to
establish new subflows to the other peer's initial IP address and port.
The in-kernel PM has access to this info, but the userspace PM didn't.
The RFC8684 [1] is strict about that:
(...) therefore the receiver MUST NOT try to open any additional
subflows toward this address and port.
So it is important to tell the userspace about that as it is responsible
for the respect of this flag.
When a new connection is created and established, the Netlink events
now contain the existing but not currently used 'flags' attribute. When
MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 is set, it means no other subflows
to the initial IP address and port -- info that are also part of the
event -- can be established.
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.1-20.6 [1]
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/532
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-2-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in mptcp_pm.yaml, and mptcp_pm.h, because these files have
been added later by commit bc8aeb2045e2 ("Documentation: netlink: add
a YAML spec for mptcp"), and commit 9d1ed17f93ce ("uapi: mptcp: use
header file generated from YAML spec"), which are not in this version.
Applying the same modifications, but only in mptcp.h.
Conflict in pm_netlink.c, because of a difference in the context,
introduced by commit b9f4554356f6 ("mptcp: annotate lockless access
for token"), which is not in this version. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0dd765fae295832934bf28e45dd5a355e0891ed4 upstream.
vmxnet3 does not unregister xdp rxq info in the
vmxnet3_reset_work() code path as vmxnet3_rq_destroy()
is not invoked in this code path. So, we get below message with a
backtrace.
Missing unregister, handled but fix driver
WARNING: CPU:48 PID: 500 at net/core/xdp.c:182
__xdp_rxq_info_reg+0x93/0xf0
This patch fixes the problem by moving the unregister
code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup().
Fixes: 54f00cce11 ("vmxnet3: Add XDP support.")
Signed-off-by: Sankararaman Jayaraman <sankararaman.jayaraman@broadcom.com>
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://patch.msgid.link/20250320045522.57892-1-sankararaman.jayaraman@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Ajay: Modified to apply on v6.6, v6.12 ]
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9574b2330dbd2b5459b74d3b5e9619d39299fc6f ]
If an error causes af_alg_sendmsg to abort, ctx->merge may contain
a garbage value from the previous loop. This may then trigger a
crash on the next entry into af_alg_sendmsg when it attempts to do
a merge that can't be done.
Fix this by setting ctx->merge to zero near the start of the loop.
Fixes: 8ff590903d ("crypto: algif_skcipher - User-space interface for skcipher operations")
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 3539b1467e94336d5854ebf976d9627bfb65d6c3 upstream.
When running task_work for an exiting task, rather than perform the
issue retry attempt, the task_work is canceled. However, this isn't
done for a ring that has been closed. This can lead to requests being
successfully completed post the ring being closed, which is somewhat
confusing and surprising to an application.
Rather than just check the task exit state, also include the ring
ref state in deciding whether or not to terminate a given request when
run from task_work.
Cc: stable@vger.kernel.org # 6.1+
Link: https://github.com/axboe/liburing/discussions/1459
Reported-by: Benedek Thaler <thaler@thaler.hu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parts of commit b6f58a3f4aa8dba424356c7a69388a81f4459300 upstream.
Backport io_should_terminate_tw() helper to judge whether task_work
should be run or terminated.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d33c3471047fc54966621d19329e6a23ebc8ec50 upstream.
This laptop uses the ALC236 codec with COEF 0x7 and idx 1 to
control the mute LED. Enable the existing quirk for this device.
Signed-off-by: Praful Adiga <praful.adiga@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8708c5d8b3fb3f6d5d3b9e6bfe01a505819f519a upstream.
The disconnect test-case, with 'plain' TCP sockets generates spurious
errors, e.g.
07 ns1 TCP -> ns1 (dead:beef:1::1:10006) MPTCP
read: Connection reset by peer
read: Connection reset by peer
(duration 155ms) [FAIL] client exit code 3, server 3
netns ns1-FloSdv (listener) socket stat for 10006:
TcpActiveOpens 2 0.0
TcpPassiveOpens 2 0.0
TcpEstabResets 2 0.0
TcpInSegs 274 0.0
TcpOutSegs 276 0.0
TcpOutRsts 3 0.0
TcpExtPruneCalled 2 0.0
TcpExtRcvPruned 1 0.0
TcpExtTCPPureAcks 104 0.0
TcpExtTCPRcvCollapsed 2 0.0
TcpExtTCPBacklogCoalesce 42 0.0
TcpExtTCPRcvCoalesce 43 0.0
TcpExtTCPChallengeACK 1 0.0
TcpExtTCPFromZeroWindowAdv 42 0.0
TcpExtTCPToZeroWindowAdv 41 0.0
TcpExtTCPWantZeroWindowAdv 13 0.0
TcpExtTCPOrigDataSent 164 0.0
TcpExtTCPDelivered 165 0.0
TcpExtTCPRcvQDrop 1 0.0
In the failing scenarios (TCP -> MPTCP), the involved sockets are
actually plain TCP ones, as fallbacks for passive sockets at 2WHS time
cause the MPTCP listeners to actually create 'plain' TCP sockets.
Similar to commit 218cc166321f ("selftests: mptcp: avoid spurious errors
on disconnect"), the root cause is in the user-space bits: the test
program tries to disconnect as soon as all the pending data has been
spooled, generating an RST. If such option reaches the peer before the
connection has reached the closed status, the TCP socket will report an
error to the user-space, as per protocol specification, causing the
above failure. Note that it looks like this issue got more visible since
the "tcp: receiver changes" series from commit 06baf9bfa6ca ("Merge
branch 'tcp-receiver-changes'").
Address the issue by explicitly waiting for the TCP sockets (-t) to
reach a closed status before performing the disconnect. More precisely,
the test program now waits for plain TCP sockets or TCP subflows in
addition to the MPTCP sockets that were already monitored.
While at it, use 'ss' with '-n' to avoid resolving service names, which
is not needed here.
Fixes: 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-3-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14e22b43df25dbd4301351b882486ea38892ae4f upstream.
IO errors were correctly printed to stderr, and propagated up to the
main loop for the server side, but the returned value was ignored. As a
consequence, the program for the listener side was no longer exiting
with an error code in case of IO issues.
Because of that, some issues might not have been seen. But very likely,
most issues either had an effect on the client side, or the file
transfer was not the expected one, e.g. the connection got reset before
the end. Still, it is better to fix this.
The main consequence of this issue is the error that was reported by the
selftests: the received and sent files were different, and the MIB
counters were not printed. Also, when such errors happened during the
'disconnect' tests, the program tried to continue until the timeout.
Now when an IO error is detected, the program exits directly with an
error.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-2-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4351ca3fcb3ffecf12631b4996bf085a2dad0db6 upstream.
We need to increment i_fastreg_wrs before we bail out from
rds_ib_post_reg_frmr().
We have a fixed budget of how many FRWR operations that can be
outstanding using the dedicated QP used for memory registrations and
de-registrations. This budget is enforced by the atomic_t
i_fastreg_wrs. If we bail out early in rds_ib_post_reg_frmr(), we will
"leak" the possibility of posting an FRWR operation, and if that
accumulates, no FRWR operation can be carried out.
Fixes: 1659185fb4 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Fixes: 3a2886cca7 ("net/rds: Keep track of and wait for FRWR segments in use upon shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250911133336.451212-1-haakon.bugge@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6f56a44e4c1014b08859dcf04ed246500e310e5 upstream.
Since commit 7d5e9737ef ("net: rfkill: gpio: get the name and type from
device property") rfkill_find_type() gets called with the possibly
uninitialized "const char *type_name;" local variable.
On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752"
acpi_device, the rfkill->type is set based on the ACPI acpi_device_id:
rfkill->type = (unsigned)id->driver_data;
and there is no "type" property so device_property_read_string() will fail
and leave type_name uninitialized, leading to a potential crash.
rfkill_find_type() does accept a NULL pointer, fix the potential crash
by initializing type_name to NULL.
Note likely sofar this has not been caught because:
1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device
2. The stack happened to contain NULL where type_name is stored
Fixes: 7d5e9737ef ("net: rfkill: gpio: get the name and type from device property")
Cc: stable@vger.kernel.org
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20250913113515.21698-1-hansg@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d02e48830e3fce9701265f6c5a58d9bdaf906a76 upstream.
Commit 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
inhibited pre-VMRUN sync of TPR from LAPIC into VMCB::V_TPR in
sync_lapic_to_cr8() when AVIC is active.
AVIC does automatically sync between these two fields, however it does
so only on explicit guest writes to one of these fields, not on a bare
VMRUN.
This meant that when AVIC is enabled host changes to TPR in the LAPIC
state might not get automatically copied into the V_TPR field of VMCB.
This is especially true when it is the userspace setting LAPIC state via
KVM_SET_LAPIC ioctl() since userspace does not have access to the guest
VMCB.
Practice shows that it is the V_TPR that is actually used by the AVIC to
decide whether to issue pending interrupts to the CPU (not TPR in TASKPRI),
so any leftover value in V_TPR will cause serious interrupt delivery issues
in the guest when AVIC is enabled.
Fix this issue by doing pre-VMRUN TPR sync from LAPIC into VMCB::V_TPR
even when AVIC is enabled.
Fixes: 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/c231be64280b1461e854e1ce3595d70cde3a2e9d.1756139678.git.maciej.szmigiero@oracle.com
[sean: tag for stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68f27f7c7708183e7873c585ded2f1b057ac5b97 upstream.
If earlier opening of source graph fails (e.g. ADSP rejects due to
incorrect audioreach topology), the graph is closed and
"dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink
graph continues though and next call to q6apm_lpass_dai_prepare()
receives dai_data->graph[dai->id]=NULL leading to NULL pointer
exception:
qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd
qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78
q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8
...
Call trace:
q6apm_graph_media_format_pcm+0x48/0x120 (P)
q6apm_lpass_dai_prepare+0x110/0x1b4
snd_soc_pcm_dai_prepare+0x74/0x108
__soc_pcm_prepare+0x44/0x160
dpcm_be_dai_prepare+0x124/0x1c0
Fixes: 30ad723b93 ("ASoC: qdsp6: audioreach: add q6apm lpass dai support")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Message-ID: <20250904101849.121503-2-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96fa515e70f3e4b98685ef8cac9d737fc62f10e1 upstream.
[BUG]
Inside check_inode_ref(), we need to make sure every structure,
including the btrfs_inode_extref header, is covered by the item. But
our code is incorrectly using "sizeof(iref)", where @iref is just a
pointer.
This means "sizeof(iref)" will always be "sizeof(void *)", which is much
smaller than "sizeof(struct btrfs_inode_extref)".
This will allow some bad inode extrefs to sneak in, defeating tree-checker.
[FIX]
Fix the typo by calling "sizeof(*iref)", which is the same as
"sizeof(struct btrfs_inode_extref)", and will be the correct behavior we
want.
Fixes: 71bf92a9b8 ("btrfs: tree-checker: Add check for INODE_REF")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dce043c07ca1ac19cfbe2844a6dc71e35c322353 upstream.
switch_to_super_page() assumes the memory range it's working on is aligned
to the target large page level. Unfortunately, __domain_mapping() doesn't
take this into account when using it, and will pass unaligned ranges
ultimately freeing a PTE range larger than expected.
Take for example a mapping with the following iov_pfn range [0x3fe400,
0x4c0600), which should be backed by the following mappings:
iov_pfn [0x3fe400, 0x3fffff] covered by 2MiB pages
iov_pfn [0x400000, 0x4bffff] covered by 1GiB pages
iov_pfn [0x4c0000, 0x4c05ff] covered by 2MiB pages
Under this circumstance, __domain_mapping() will pass [0x400000, 0x4c05ff]
to switch_to_super_page() at a 1 GiB granularity, which will in turn
free PTEs all the way to iov_pfn 0x4fffff.
Mitigate this by rounding down the iov_pfn range passed to
switch_to_super_page() in __domain_mapping()
to the target large page level.
Additionally add range alignment checks to switch_to_super_page.
Fixes: 9906b9352a ("iommu/vt-d: Avoid duplicate removing in __domain_mapping()")
Signed-off-by: Eugene Koira <eugkoira@amazon.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Saenz Julienne <nsaenz@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20250826143816.38686-1-eugkoira@amazon.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51adb03e6b865c0c6790f29659ff52d56742de2e upstream.
Add a check for the return value of kobject_create_and_add(), to ensure
that the kobj allocation succeeds for later use.
Cc: stable@vger.kernel.org
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9d13433fe17be0e867e51e71a1acd2731fbef8d upstream.
ARCH_STRICT_ALIGN is used for hardware without UAL, now it only control
the -mstrict-align flag. However, ACPI structures are packed by default
so will cause unaligned accesses.
To avoid this, define ACPI_MISALIGNMENT_NOT_SUPPORTED in asm/acenv.h to
align ACPI structures if ARCH_STRICT_ALIGN enabled.
Cc: stable@vger.kernel.org
Reported-by: Binbin Zhou <zhoubinbin@loongson.cn>
Suggested-by: Xi Ruoyao <xry111@xry111.site>
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5003098e2f337d8e8a87dc636250e3fa978d9ad upstream.
Loongson-3A6000 and 3C6000 CPUs also support unaligned memory access, so
the current description is out of date to some extent.
Actually, all of Loongson-3 series processors based on LoongArch support
unaligned memory access, this hardware capability is indicated by the bit
20 (UAL) of CPUCFG1 register, update the help info to reflect the reality.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
