dm-bow provides checkpoint functionality for filesystems that do not
have built in checkpointings (like ext4). As of Android 13, using f2fs
is mandatory for userdata, so we no longer need dm-bow.
Bug: 129280212
Test: Builds
Signed-off-by: Paul Lawrence <paullawrence@google.com>
Change-Id: I5f1c50dc89925debcfb1b32ec43fed981ce016a3
The implementation of extcon_get_state() defines `id` as const unsigned
int, while the declarations do not qualify. This leads to inconsistent
type information recorded when comparing Dwarf produced by Clang full
LTO and Clang thin LTO.
This is still valid code, but for now address this by aligning the
declarations with the definitions until it can be addressed in the
compiler.
Bug: 221022839
Bug: 220181989
Signed-off-by: Matthias Maennich <maennich@google.com>
Change-Id: Iad555f551e998bec62a27cce63b3c033a46baf7f
Changes in 5.15.25
drm/nouveau/pmu/gm200-: use alternate falcon reset sequence
fs/proc: task_mmu.c: don't read mapcount for migration entry
btrfs: zoned: cache reported zone during mount
scsi: lpfc: Fix mailbox command failure during driver initialization
HID:Add support for UGTABLET WP5540
Revert "svm: Add warning message for AVIC IPI invalid target"
parisc: Show error if wrong 32/64-bit compiler is being used
serial: parisc: GSC: fix build when IOSAPIC is not set
parisc: Drop __init from map_pages declaration
parisc: Fix data TLB miss in sba_unmap_sg
parisc: Fix sglist access in ccio-dma.c
mmc: block: fix read single on recovery logic
mm: don't try to NUMA-migrate COW pages that have other uses
HID: amd_sfh: Add illuminance mask to limit ALS max value
HID: i2c-hid: goodix: Fix a lockdep splat
HID: amd_sfh: Increase sensor command timeout
HID: amd_sfh: Correct the structure field name
PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology
parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()
btrfs: send: in case of IO error log it
platform/x86: touchscreen_dmi: Add info for the RWC NANOTE P8 AY07J 2-in-1
platform/x86: ISST: Fix possible circular locking dependency detected
kunit: tool: Import missing importlib.abc
selftests: rtc: Increase test timeout so that all tests run
kselftest: signal all child processes
net: ieee802154: at86rf230: Stop leaking skb's
selftests/zram: Skip max_comp_streams interface on newer kernel
selftests/zram01.sh: Fix compression ratio calculation
selftests/zram: Adapt the situation that /dev/zram0 is being used
selftests: openat2: Print also errno in failure messages
selftests: openat2: Add missing dependency in Makefile
selftests: openat2: Skip testcases that fail with EOPNOTSUPP
selftests: skip mincore.check_file_mmap when fs lacks needed support
ax25: improve the incomplete fix to avoid UAF and NPD bugs
pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP
vfs: make freeze_super abort when sync_filesystem returns error
quota: make dquot_quota_sync return errors from ->sync_fs
scsi: pm80xx: Fix double completion for SATA devices
kselftest: Fix vdso_test_abi return status
scsi: core: Reallocate device's budget map on queue depth change
scsi: pm8001: Fix use-after-free for aborted TMF sas_task
scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task
drm/amd: Warn users about potential s0ix problems
nvme: fix a possible use-after-free in controller reset during load
nvme-tcp: fix possible use-after-free in transport error_recovery work
nvme-rdma: fix possible use-after-free in transport error_recovery work
net: sparx5: do not refer to skb after passing it on
drm/amd: add support to check whether the system is set to s3
drm/amd: Only run s3 or s0ix if system is configured properly
drm/amdgpu: fix logic inversion in check
x86/Xen: streamline (and fix) PV CPU enumeration
Revert "module, async: async_synchronize_full() on module init iff async is used"
gcc-plugins/stackleak: Use noinstr in favor of notrace
random: wake up /dev/random writers after zap
KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU
KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM
KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case
KVM: x86: nSVM: fix potential NULL derefernce on nested migration
KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state
iwlwifi: fix use-after-free
drm/radeon: Fix backlight control on iMac 12,1
drm/atomic: Don't pollute crtc_state->mode_blob with error pointers
drm/amd/pm: correct the sequence of sending gpu reset msg
drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix.
drm/i915/opregion: check port number bounds for SWSCI display power state
drm/i915: Fix dbuf slice config lookup
drm/i915: Fix mbus join config lookup
vsock: remove vsock from connected table when connect is interrupted by a signal
drm/cma-helper: Set VM_DONTEXPAND for mmap
drm/i915/gvt: Make DRM_I915_GVT depend on X86
drm/i915/ttm: tweak priority hint selection
iwlwifi: pcie: fix locking when "HW not ready"
iwlwifi: pcie: gen2: fix locking when "HW not ready"
iwlwifi: mvm: don't send SAR GEO command for 3160 devices
selftests: netfilter: fix exit value for nft_concat_range
netfilter: nft_synproxy: unregister hooks on init error path
selftests: netfilter: disable rp_filter on router
ipv4: fix data races in fib_alias_hw_flags_set
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
ipv6: per-netns exclusive flowlabel checks
Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
mac80211: mlme: check for null after calling kmemdup
brcmfmac: firmware: Fix crash in brcm_alt_fw_path
cfg80211: fix race in netlink owner interface destruction
net: dsa: lan9303: fix reset on probe
net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
net: dsa: lantiq_gswip: fix use after free in gswip_remove()
net: dsa: lan9303: handle hwaccel VLAN tags
net: dsa: lan9303: add VLAN IDs to master device
net: ieee802154: ca8210: Fix lifs/sifs periods
ping: fix the dif and sdif check in ping_lookup
bonding: force carrier update when releasing slave
drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hit
net_sched: add __rcu annotation to netdev->qdisc
bonding: fix data-races around agg_select_timer
libsubcmd: Fix use-after-free for realloc(..., 0)
net/smc: Avoid overwriting the copies of clcsock callback functions
net: phy: mediatek: remove PHY mode check on MT7531
atl1c: fix tx timeout after link flap on Mikrotik 10/25G NIC
tipc: fix wrong publisher node address in link publications
dpaa2-switch: fix default return of dpaa2_switch_flower_parse_mirror_key
dpaa2-eth: Initialize mutex used in one step timestamping path
net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
perf bpf: Defer freeing string after possible strlen() on it
selftests/exec: Add non-regular to TEST_GEN_PROGS
arm64: Correct wrong label in macro __init_el2_gicv3
ALSA: usb-audio: revert to IMPLICIT_FB_FIXED_DEV for M-Audio FastTrack Ultra
ALSA: hda/realtek: Add quirk for Legion Y9000X 2019
ALSA: hda/realtek: Fix deadlock by COEF mutex
ALSA: hda: Fix regression on forced probe mask option
ALSA: hda: Fix missing codec probe on Shenker Dock 15
ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw()
ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_range()
ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_sx()
ASoC: ops: Fix stereo change notifications in snd_soc_put_xr_sx()
cifs: fix set of group SID via NTSD xattrs
powerpc/603: Fix boot failure with DEBUG_PAGEALLOC and KFENCE
powerpc/lib/sstep: fix 'ptesync' build error
mtd: rawnand: gpmi: don't leak PM reference in error path
smb3: fix snapshot mount option
tipc: fix wrong notification node addresses
scsi: ufs: Remove dead code
scsi: ufs: Fix a deadlock in the error handler
ASoC: tas2770: Insert post reset delay
ASoC: qcom: Actually clear DMA interrupt register for HDMI
block/wbt: fix negative inflight counter when remove scsi device
NFS: Remove an incorrect revalidation in nfs4_update_changeattr_locked()
NFS: LOOKUP_DIRECTORY is also ok with symlinks
NFS: Do not report writeback errors in nfs_getattr()
tty: n_tty: do not look ahead for EOL character past the end of the buffer
block: fix surprise removal for drivers calling blk_set_queue_dying
mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe()
mtd: parsers: qcom: Fix kernel panic on skipped partition
mtd: parsers: qcom: Fix missing free for pparts in cleanup
mtd: phram: Prevent divide by zero bug in phram_setup()
mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status
HID: elo: fix memory leak in elo_probe
mtd: rawnand: ingenic: Fix missing put_device in ingenic_ecc_get
Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj
KVM: x86/pmu: Refactoring find_arch_event() to pmc_perf_hw_id()
KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event
KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW
ARM: OMAP2+: hwmod: Add of_node_put() before break
ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of
phy: usb: Leave some clocks running during suspend
staging: vc04_services: Fix RCU dereference check
phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
irqchip/sifive-plic: Add missing thead,c900-plic match string
x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm
netfilter: conntrack: don't refresh sctp entries in closed state
ksmbd: fix same UniqueId for dot and dotdot entries
ksmbd: don't align last entry offset in smb2 query directory
arm64: dts: meson-gx: add ATF BL32 reserved-memory region
arm64: dts: meson-g12: add ATF BL32 reserved-memory region
arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610
pidfd: fix test failure due to stack overflow on some arches
selftests: fixup build warnings in pidfd / clone3 tests
mm: io_uring: allow oom-killer from io_uring_setup
ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"
kconfig: let 'shell' return enough output for deep path names
ata: libata-core: Disable TRIM on M88V29
soc: aspeed: lpc-ctrl: Block error printing on probe defer cases
xprtrdma: fix pointer derefs in error cases of rpcrdma_ep_create
drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
tracing: Fix tp_printk option related with tp_printk_stop_on_boot
display/amd: decrease message verbosity about watermarks table failure
drm/amd/display: Cap pflip irqs per max otg number
drm/amd/display: fix yellow carp wm clamping
net: usb: qmi_wwan: Add support for Dell DW5829e
net: macb: Align the dma and coherent dma masks
kconfig: fix failing to generate auto.conf
scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop
EDAC: Fix calculation of returned address and next offset in edac_align_ptr()
ucounts: Handle wrapping in is_ucounts_overlimit
ucounts: In set_cred_ucounts assume new->ucounts is non-NULL
ucounts: Base set_cred_ucounts changes on the real user
ucounts: Enforce RLIMIT_NPROC not RLIMIT_NPROC+1
lib/iov_iter: initialize "flags" in new pipe_buffer
rlimit: Fix RLIMIT_NPROC enforcement failure caused by capability calls in set_user
ucounts: Move RLIMIT_NPROC handling after set_user
net: sched: limit TC_ACT_REPEAT loops
dmaengine: sh: rcar-dmac: Check for error num after setting mask
dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe
dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size
tests: fix idmapped mount_setattr test
i2c: qcom-cci: don't delete an unregistered adapter
i2c: qcom-cci: don't put a device tree node before i2c_add_adapter()
dmaengine: ptdma: Fix the error handling path in pt_core_init()
copy_process(): Move fd_install() out of sighand->siglock critical section
scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp()
ice: enable parsing IPSEC SPI headers for RSS
i2c: brcmstb: fix support for DSL and CM variants
lockdep: Correct lock_classes index mapping
Linux 5.15.25
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ib129a0e11f5e82d67563329a5de1b0aef1d87928
commit 28df029d53 upstream.
A kernel exception was hit when trying to dump /proc/lockdep_chains after
lockdep report "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!":
Unable to handle kernel paging request at virtual address 00054005450e05c3
...
00054005450e05c3] address between user and kernel address ranges
...
pc : [0xffffffece769b3a8] string+0x50/0x10c
lr : [0xffffffece769ac88] vsnprintf+0x468/0x69c
...
Call trace:
string+0x50/0x10c
vsnprintf+0x468/0x69c
seq_printf+0x8c/0xd8
print_name+0x64/0xf4
lc_show+0xb8/0x128
seq_read_iter+0x3cc/0x5fc
proc_reg_read_iter+0xdc/0x1d4
The cause of the problem is the function lock_chain_get_class() will
shift lock_classes index by 1, but the index don't need to be shifted
anymore since commit 01bb6f0af9 ("locking/lockdep: Change the range
of class_idx in held_lock struct") already change the index to start
from 0.
The lock_classes[-1] located at chain_hlocks array. When printing
lock_classes[-1] after the chain_hlocks entries are modified, the
exception happened.
The output of lockdep_chains are incorrect due to this problem too.
Fixes: f611e8cf98 ("lockdep: Take read/write status in consideration when generate chainkey")
Signed-off-by: Cheng Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220210105011.21712-1-cheng-jui.wang@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 834cea3a25 upstream.
DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
DT binding for that reason. This driver was checking for a wrong
"compatible" however which resulted in an incorrect setup.
Fixes: e2e5a2c618 ("i2c: brcmstb: Adding support for CM and DSL SoCs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86006f9963 upstream.
The COMMS package can enable the hardware parser to recognize IPSEC
frames with ESP header and SPI identifier. If this package is available
and configured for loading in /lib/firmware, then the driver will
succeed in enabling this protocol type for RSS.
This in turn allows the hardware to hash over the SPI and use it to pick
a consistent receive queue for the same secure flow. Without this all
traffic is steered to the same queue for multiple traffic threads from
the same IP address. For that reason this is marked as a fix, as the
driver supports the model, but it wasn't enabled.
If the package is not available, adding this type will fail, but the
failure is ignored on purpose as it has no negative affect.
Fixes: c90ed40cef ("ice: Enable writing hardware filtering tables")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f10f582d28 upstream.
This fixes a deadlock added with commit b40f3894e3 ("scsi: qedi: Complete
TMF works before disconnect")
Bug description from Jia-Ju Bai:
qedi_process_tmf_resp()
spin_lock(&session->back_lock); --> Line 201 (Lock A)
spin_lock(&qedi_conn->tmf_work_lock); --> Line 230 (Lock B)
qedi_process_cmd_cleanup_resp()
spin_lock_bh(&qedi_conn->tmf_work_lock); --> Line 752 (Lock B)
spin_lock_bh(&conn->session->back_lock); --> Line 784 (Lock A)
When qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp() are
concurrently executed, the deadlock can occur.
This patch fixes the deadlock by not holding the tmf_work_lock in
qedi_process_cmd_cleanup_resp while holding the back_lock. The
tmf_work_lock is only needed while we remove the tmf_work from the
work_list.
Link: https://lore.kernel.org/r/20220208185448.6206-1-michael.christie@oracle.com
Fixes: b40f3894e3 ("scsi: qedi: Complete TMF works before disconnect")
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02a4a69667 upstream.
There is a minor chance for a race, if a pointer to an i2c-bus subnode
is stored and then reused after releasing its reference, and it would
be sufficient to get one more reference under a loop over children
subnodes.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0d48505a1 upstream.
If i2c_add_adapter() fails to add an I2C adapter found on QCOM CCI
controller, on error path i2c_del_adapter() is still called.
Fortunately there is a sanity check in the I2C core, so the only
visible implication is a printed debug level message:
i2c-core: attempting to delete unregistered adapter [Qualcomm-CCI]
Nevertheless it would be reasonable to correct the probe error path.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c923a8e7ed upstream.
During set*id() which cred->ucounts to charge the the current process
to is not known until after set_cred_ucounts. So move the
RLIMIT_NPROC checking into a new helper flag_nproc_exceeded and call
flag_nproc_exceeded after set_cred_ucounts.
This is very much an arbitrary subset of the places where we currently
change the RLIMIT_NPROC accounting, designed to preserve the existing
logic.
Fixing the existing logic will be the subject of another series of
changes.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220216155832.680775-4-ebiederm@xmission.com
Fixes: 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c16bdeb5a3 upstream.
Solar Designer <solar@openwall.com> wrote:
> I'm not aware of anyone actually running into this issue and reporting
> it. The systems that I personally know use suexec along with rlimits
> still run older/distro kernels, so would not yet be affected.
>
> So my mention was based on my understanding of how suexec works, and
> code review. Specifically, Apache httpd has the setting RLimitNPROC,
> which makes it set RLIMIT_NPROC:
>
> https://httpd.apache.org/docs/2.4/mod/core.html#rlimitnproc
>
> The above documentation for it includes:
>
> "This applies to processes forked from Apache httpd children servicing
> requests, not the Apache httpd children themselves. This includes CGI
> scripts and SSI exec commands, but not any processes forked from the
> Apache httpd parent, such as piped logs."
>
> In code, there are:
>
> ./modules/generators/mod_cgid.c: ( (cgid_req.limits.limit_nproc_set) && ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/generators/mod_cgi.c: ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/filters/mod_ext_filter.c: rv = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC, conf->limit_nproc);
>
> For example, in mod_cgi.c this is in run_cgi_child().
>
> I think this means an httpd child sets RLIMIT_NPROC shortly before it
> execs suexec, which is a SUID root program. suexec then switches to the
> target user and execs the CGI script.
>
> Before 2863643fb8, the setuid() in suexec would set the flag, and the
> target user's process count would be checked against RLIMIT_NPROC on
> execve(). After 2863643fb8, the setuid() in suexec wouldn't set the
> flag because setuid() is (naturally) called when the process is still
> running as root (thus, has those limits bypass capabilities), and
> accordingly execve() would not check the target user's process count
> against RLIMIT_NPROC.
In commit 2863643fb8 ("set_user: add capability check when
rlimit(RLIMIT_NPROC) exceeds") capable calls were added to set_user to
make it more consistent with fork. Unfortunately because of call site
differences those capable calls were checking the credentials of the
user before set*id() instead of after set*id().
This breaks enforcement of RLIMIT_NPROC for applications that set the
rlimit and then call set*id() while holding a full set of
capabilities. The capabilities are only changed in the new credential
in security_task_fix_setuid().
The code in apache suexec appears to follow this pattern.
Commit 909cc4ae86f3 ("[PATCH] Fix two bugs with process limits
(RLIMIT_NPROC)") where this check was added describes the targes of this
capability check as:
2/ When a root-owned process (e.g. cgiwrap) sets up process limits and then
calls setuid, the setuid should fail if the user would then be running
more than rlim_cur[RLIMIT_NPROC] processes, but it doesn't. This patch
adds an appropriate test. With this patch, and per-user process limit
imposed in cgiwrap really works.
So the original use case of this check also appears to match the broken
pattern.
Restore the enforcement of RLIMIT_NPROC by removing the bad capable
checks added in set_user. This unfortunately restores the
inconsistent state the code has been in for the last 11 years, but
dealing with the inconsistencies looks like a larger problem.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20210907213042.GA22626@openwall.com/
Link: https://lkml.kernel.org/r/20220212221412.GA29214@openwall.com
Link: https://lkml.kernel.org/r/20220216155832.680775-1-ebiederm@xmission.com
Fixes: 2863643fb8 ("set_user: add capability check when rlimit(RLIMIT_NPROC) exceeds")
History-Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reviewed-by: Solar Designer <solar@openwall.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f2f9c4d82 upstream.
Michal Koutný <mkoutny@suse.com> wrote:
> It was reported that v5.14 behaves differently when enforcing
> RLIMIT_NPROC limit, namely, it allows one more task than previously.
> This is consequence of the commit 21d1c5e386 ("Reimplement
> RLIMIT_NPROC on top of ucounts") that missed the sharpness of
> equality in the forking path.
This can be fixed either by fixing the test or by moving the increment
to be before the test. Fix it my moving copy_creds which contains
the increment before is_ucounts_overlimit.
In the case of CLONE_NEWUSER the ucounts in the task_cred changes.
The function is_ucounts_overlimit needs to use the final version of
the ucounts for the new process. Which means moving the
is_ucounts_overlimit test after copy_creds is necessary.
Both the test in fork and the test in set_user were semantically
changed when the code moved to ucounts. The change of the test in
fork was bad because it was before the increment. The test in
set_user was wrong and the change to ucounts fixed it. So this
fix only restores the old behavior in one lcation not two.
Link: https://lkml.kernel.org/r/20220204181144.24462-1-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220216155832.680775-2-ebiederm@xmission.com
Cc: stable@vger.kernel.org
Reported-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Fixes: 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a55d07294f upstream.
Michal Koutný <mkoutny@suse.com> wrote:
> Tasks are associated to multiple users at once. Historically and as per
> setrlimit(2) RLIMIT_NPROC is enforce based on real user ID.
>
> The commit 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
> made the accounting structure "indexed" by euid and hence potentially
> account tasks differently.
>
> The effective user ID may be different e.g. for setuid programs but
> those are exec'd into already existing task (i.e. below limit), so
> different accounting is moot.
>
> Some special setresuid(2) users may notice the difference, justifying
> this fix.
I looked at cred->ucount and it is only used for rlimit operations
that were previously stored in cred->user. Making the fact
cred->ucount can refer to a different user from cred->user a bug,
affecting all uses of cred->ulimit not just RLIMIT_NPROC.
Fix set_cred_ucounts to always use the real uid not the effective uid.
Further simplify set_cred_ucounts by noticing that set_cred_ucounts
somehow retained a draft version of the check to see if alloc_ucounts
was needed that checks the new->user and new->user_ns against the
current_real_cred(). Remove that draft version of the check.
All that matters for setting the cred->ucounts are the user_ns and uid
fields in the cred.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220207121800.5079-4-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220216155832.680775-3-ebiederm@xmission.com
Reported-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Fixes: 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99c31f9fed upstream.
Any cred that is destined for use by commit_creds must have a non-NULL
cred->ucounts field. Only curing credential construction is a NULL
cred->ucounts valid. Only abort_creds, put_cred, and put_cred_rcu
needs to deal with a cred with a NULL ucount. As set_cred_ucounts is
non of those case don't confuse people by handling something that can
not happen.
Link: https://lkml.kernel.org/r/871r4irzds.fsf_-_@disp2133
Tested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8efca92ae upstream.
Do alignment logic properly and use the "ptr" local variable for
calculating the remainder of the alignment.
This became an issue because struct edac_mc_layer has a size that is not
zero modulo eight, and the next offset that was prepared for the private
data was unaligned, causing an alignment exception.
The patch in Fixes: which broke this actually wanted to "what we
actually care about is the alignment of the actual pointer that's about
to be returned." But it didn't check that alignment.
Use the correct variable "ptr" for that.
[ bp: Massage commit message. ]
Fixes: 8447c4d15e ("edac: Do alignment logic properly in edac_align_ptr()")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220113100622.12783-2-farbere@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f4c5a26f7 upstream.
When connected point to point, the driver does not know the FC4's supported
by the other end. In Fabrics, it can query the nameserver. Thus the driver
must send PRLIs for the FC4s it supports and enable support based on the
acc(ept) or rej(ect) of the respective FC4 PRLI. Currently the driver
supports SCSI and NVMe PRLIs.
Unfortunately, although the behavior is per standard, many devices have
come to expect only SCSI PRLIs. In this particular example, the NVMe PRLI
is properly RJT'd but the target decided that it must LOGO after seeing the
unexpected NVMe PRLI. The LOGO causes the sequence to restart and login is
now in an infinite failure loop.
Fix the problem by having the driver, on a pt2pt link, remember NVMe PRLI
accept or reject status across logout as long as the link stays "up". When
retrying login, if the prior NVMe PRLI was rejected, it will not be sent on
the next login.
Link: https://lore.kernel.org/r/20220212163120.15385-1-jsmart2021@gmail.com
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1b9e740a81 ]
When the KCONFIG_AUTOCONFIG is specified (e.g. export \
KCONFIG_AUTOCONFIG=output/config/auto.conf), the directory of
include/config/ will not be created, so kconfig can't create deps
files in it and auto.conf can't be generated.
Signed-off-by: Jing Leng <jleng@ambarella.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37f7860602 ]
Single page and coherent memory blocks can use different DMA masks
when the macb accesses physical memory directly. The kernel is clever
enough to allocate pages that fit into the requested address width.
When using the ARM SMMU, the DMA mask must be the same for single
pages and big coherent memory blocks. Otherwise the translation
tables turn into one big mess.
[ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK
[ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1
[ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK
[ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1
Since using the same DMA mask does not hurt direct 1:1 physical
memory mappings, this commit always aligns DMA and coherent masks.
Signed-off-by: Marc St-Amand <mstamand@ciena.com>
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 328e34a5ad ]
[Why]
pflip interrupt order are mapped 1 to 1 to otg id.
e.g. if irq_src=26 corresponds to otg0 then 27->otg1, 28->otg2...
Linux DM registers pflip interrupts per number of crtcs.
In fused pipe case crtc numbers can be less than otg id.
e.g. if one pipe out of 3(otg#0-2) is fused adev->mode_info.num_crtc=2
so DM only registers irq_src 26,27.
This is a bug since if pipe#2 remains unfused DM never gets
otg2 pflip interrupt (irq_src=28)
That may results in gfx failure due to pflip timeout.
[How]
Register pflip interrupts per max num of otg instead of num_crtc
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03ad3093c7 ]
A number of BIOS versions have a problem with the watermarks table not
being configured properly. This manifests as a very scary looking warning
during resume from s0i3. This should be harmless in most cases and is well
understood, so decrease the assertion to a clearer warning about the problem.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3203ce39ac ]
The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is
the same as another kernel parameter "tp_printk". If "tp_printk" setup is
called before the "tp_printk_stop_on_boot", it will override the latter
and keep it from being set.
This is similar to other kernel parameter issues, such as:
Commit 745a600cf1 ("um: console: Ignore console= option")
or init/do_mounts.c:45 (setup function of "ro" kernel param)
Fix it by checking for a "_" right after the "tp_printk" and if that
exists do not process the parameter.
Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com
Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
[ Fixed up change log and added space after if condition ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9c10b5b3b ]
If there are failures then we must not leave the non-NULL pointers with
the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries
free them, resulting in an Oops.
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8ea23d5fa ]
This device is a CF card, or possibly an SSD in CF form factor.
It supports NCQ and high speed DMA.
While it also advertises TRIM support, I/O errors are reported
when the discard mount option fstrim is used. TRIM also fails
when disabling NCQ and not just as an NCQ command.
TRIM must be disabled for this device.
Signed-off-by: Zoltán Böszörményi <zboszor@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a4c5b2a6d ]
The 'shell' built-in only returns the first 256 bytes of the command's
output. In some cases, 'shell' is used to return a path; by bumping up
the buffer size to 4096 this lets us capture up to PATH_MAX.
The specific case where I ran into this was due to commit 1e860048c5
("gcc-plugins: simplify GCC plugin-dev capability test"). After this
change, we now use `$(shell,$(CC) -print-file-name=plugin)` to return
a path; if the gcc path is particularly long, then the path ends up
truncated at the 256 byte mark, which makes the HAVE_GCC_PLUGINS
depends test always fail.
Signed-off-by: Brenda Streiff <brenda.streiff@ni.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6ebb17ccc ]
Testing on various upcoming OEM systems shows commit 7b167c4cb4 ("ACPI:
PM: Only mark EC GPE for wakeup on Intel systems") was short
sighted and the symptoms were indicative of other problems. Some OEMs
do have the dedicated GPIOs for the power button but also rely upon
an interrupt to the EC SCI to let the lid work.
The original commit showed spurious activity on Lenovo systems:
* On both Lenovo T14 and P14s the keyboard wakeup doesn't work, and
sometimes the power button event doesn't work.
This was confirmed on my end at that time.
However further development in the kernel showed that the issue was
actually the IRQ for the GPIO controller was also shared with the EC SCI.
This was actually fixed by commit 2d54067fcd ("pinctrl: amd: Fix
wakeups when IRQ is shared with SCI").
The original commit also showed problems with AC adapter:
* On HP 635 G7 detaching or attaching AC during suspend will cause
the system not to wakeup
* On Asus vivobook to prevent detaching AC causing resume problems
* On Lenovo 14ARE05 to prevent detaching AC causing resume problems
* On HP ENVY x360 to prevent detaching AC causing resume problems
Detaching AC adapter causing problems appears to have been a problem
because the EC SCI went off to notify the OS of the power adapter change
but the SCI was ignored and there was no other way to wake up this system
since GPIO controller wasn't properly enabled. The wakeups were fixed by
enabling the GPIO controller in commit acd47b9f28 ("pinctrl: amd: Handle
wake-up interrupt").
I've confirmed on a variety of OEM notebooks with the following test
1) echo 1 | sudo tee /sys/power/pm_debug_messages
2) sudo systemctl suspend
3) unplug AC adapter, make sure system is still asleep
4) wake system from lid (which is provided by ACPI SCI on some of them)
5) dmesg
a) see the EC GPE dispatched, timekeeping for X seconds (matching ~time
until AC adapter plug out)
b) see timekeeping for Y seconds until woke (matching ~time from AC
adapter until lid event)
6) Look at /sys/kernel/debug/amd_pmc/s0ix_stats
"Time (in us) in S0i3" = X + Y - firmware processing time
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a3f1e0bea ]
On an overcommitted system which is running multiple workloads of
varying priorities, it is preferred to trigger an oom-killer to kill a
low priority workload than to let the high priority workload receiving
ENOMEMs. On our memory overcommitted systems, we are seeing a lot of
ENOMEMs instead of oom-kills because io_uring_setup callchain is using
__GFP_NORETRY gfp flag which avoids the oom-killer. Let's remove it and
allow the oom-killer to kill a lower priority job.
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20220125051736.2981459-1-shakeelb@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2aa5e650b ]
These are some trivial fixups, which were needed to build the tests with
clang and -Werror. The following issues are fixed:
- Remove various unused variables.
- In child_poll_leader_exit_test, clang isn't smart enough to realize
syscall(SYS_exit, 0) won't return, so it complains we never return
from a non-void function. Add an extra exit(0) to appease it.
- In test_pidfd_poll_leader_exit, ret may be branched on despite being
uninitialized, if we have !use_waitpid. Initialize it to zero to get
the right behavior in that case.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cbd93c3c1 ]
When running the pidfd_fdinfo_test on arm64, it fails for me. After some
digging, the reason is that the child exits due to SIGBUS, because it
overflows the 1024 byte stack we've reserved for it.
To fix the issue, increase the stack size to 8192 bytes (this number is
somewhat arbitrary, and was arrived at through experimentation -- I kept
doubling until the failure no longer occurred).
Also, let's make the issue easier to debug. wait_for_pid() returns an
ambiguous value: it may return -1 in all of these cases:
1. waitpid() itself returned -1
2. waitpid() returned success, but we found !WIFEXITED(status).
3. The child process exited, but it did so with a -1 exit code.
There's no way for the caller to tell the difference. So, at least log
which occurred, so the test runner can debug things.
While debugging this, I found that we had !WIFEXITED(), because the
child exited due to a signal. This seems like a reasonably common case,
so also print out whether or not we have WIFSIGNALED(), and the
associated WTERMSIG() (if any). This lets us see the SIGBUS I'm fixing
clearly when it occurs.
Finally, I'm suspicious of allocating the child's stack on our stack.
man clone(2) suggests that the correct way to do this is with mmap(),
and in particular by setting MAP_STACK. So, switch to doing it that way
instead.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04e260948a ]
When checking smb2 query directory packets from other servers,
OutputBufferLength is different with ksmbd. Other servers add an unaligned
next offset to OutputBufferLength for the last entry.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97550c7478 ]
ksmbd sets the inode number to UniqueId. However, the same UniqueId for
dot and dotdot entry is set to the inode number of the parent inode.
This patch set them using the current inode and parent inode.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77b337196a ]
Vivek Thrivikraman reported:
An SCTP server application which is accessed continuously by client
application.
When the session disconnects the client retries to establish a connection.
After restart of SCTP server application the session is not established
because of stale conntrack entry with connection state CLOSED as below.
(removing this entry manually established new connection):
sctp 9 CLOSED src=10.141.189.233 [..] [ASSURED]
Just skip timeout update of closed entries, we don't want them to
stay around forever.
Reported-and-tested-by: Vivek Thrivikraman <vivek.thrivikraman@est.tech>
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfb1a7c91f ]
In __WARN_FLAGS(), we had two asm statements (abbreviated):
asm volatile("ud2");
asm volatile(".pushsection .discard.reachable");
These pair of statements are used to trigger an exception, but then help
objtool understand that for warnings, control flow will be restored
immediately afterwards.
The problem is that volatile is not a compiler barrier. GCC explicitly
documents this:
> Note that the compiler can move even volatile asm instructions
> relative to other code, including across jump instructions.
Also, no clobbers are specified to prevent instructions from subsequent
statements from being scheduled by compiler before the second asm
statement. This can lead to instructions from subsequent statements
being emitted by the compiler before the second asm statement.
Providing a scheduling model such as via -march= options enables the
compiler to better schedule instructions with known latencies to hide
latencies from data hazards compared to inline asm statements in which
latencies are not estimated.
If an instruction gets scheduled by the compiler between the two asm
statements, then objtool will think that it is not reachable, producing
a warning.
To prevent instructions from being scheduled in between the two asm
statements, merge them.
Also remove an unnecessary unreachable() asm annotation from BUG() in
favor of __builtin_unreachable(). objtool is able to track that the ud2
from BUG() terminates control flow within the function.
Link: https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile
Link: https://github.com/ClangBuiltLinux/linux/issues/1483
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220202205557.2260694-1-ndesaulniers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d4df649cb ]
The thead,c900-plic has been used in opensbi to distinguish
PLIC [1]. Although PLICs have the same behaviors in Linux,
they are different hardware with some custom initializing in
firmware(opensbi).
Qute opensbi patch commit-msg by Samuel:
The T-HEAD PLIC implementation requires setting a delegation bit
to allow access from S-mode. Now that the T-HEAD PLIC has its own
compatible string, set this bit automatically from the PLIC driver,
instead of reaching into the PLIC's MMIO space from another driver.
[1]: 78c2b19218
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
