commit fe673d3f5b upstream
Instead of using GUP, make fault_in_safe_writeable() actually force a
'handle_mm_fault()' using the same fixup_user_fault() machinery that
futexes already use.
Using the GUP machinery meant that fault_in_safe_writeable() did not do
everything that a real fault would do, ranging from not auto-expanding
the stack segment, to not updating accessed or dirty flags in the page
tables (GUP sets those flags on the pages themselves).
The latter causes problems on architectures (like s390) that do accessed
bit handling in software, which meant that fault_in_safe_writeable()
didn't actually do all the fault handling it needed to, and trying to
access the user address afterwards would still cause faults.
Reported-and-tested-by: Andreas Gruenbacher <agruenba@redhat.com>
Fixes: cdd591fc86 ("iov_iter: Introduce fault_in_iov_iter_writeable")
Link: https://lore.kernel.org/all/CAHc6FU5nP+nziNGG0JAF1FUx-GV7kKFvM7aZuU_XD2_1v4vnvg@mail.gmail.com/
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca93e44bfb upstream
Some users recently reported that MariaDB was getting a read corruption
when using io_uring on top of btrfs. This started to happen in 5.16,
after commit 51bd9563b6 ("btrfs: fix deadlock due to page faults
during direct IO reads and writes"). That changed btrfs to use the new
iomap flag IOMAP_DIO_PARTIAL and to disable page faults before calling
iomap_dio_rw(). This was necessary to fix deadlocks when the iovector
corresponds to a memory mapped file region. That type of scenario is
exercised by test case generic/647 from fstests.
For this MariaDB scenario, we attempt to read 16K from file offset X
using IOCB_NOWAIT and io_uring. In that range we have 4 extents, each
with a size of 4K, and what happens is the following:
1) btrfs_direct_read() disables page faults and calls iomap_dio_rw();
2) iomap creates a struct iomap_dio object, its reference count is
initialized to 1 and its ->size field is initialized to 0;
3) iomap calls btrfs_dio_iomap_begin() with file offset X, which finds
the first 4K extent, and setups an iomap for this extent consisting
of a single page;
4) At iomap_dio_bio_iter(), we are able to access the first page of the
buffer (struct iov_iter) with bio_iov_iter_get_pages() without
triggering a page fault;
5) iomap submits a bio for this 4K extent
(iomap_dio_submit_bio() -> btrfs_submit_direct()) and increments
the refcount on the struct iomap_dio object to 2; The ->size field
of the struct iomap_dio object is incremented to 4K;
6) iomap calls btrfs_iomap_begin() again, this time with a file
offset of X + 4K. There we setup an iomap for the next extent
that also has a size of 4K;
7) Then at iomap_dio_bio_iter() we call bio_iov_iter_get_pages(),
which tries to access the next page (2nd page) of the buffer.
This triggers a page fault and returns -EFAULT;
8) At __iomap_dio_rw() we see the -EFAULT, but we reset the error
to 0 because we passed the flag IOMAP_DIO_PARTIAL to iomap and
the struct iomap_dio object has a ->size value of 4K (we submitted
a bio for an extent already). The 'wait_for_completion' variable
is not set to true, because our iocb has IOCB_NOWAIT set;
9) At the bottom of __iomap_dio_rw(), we decrement the reference count
of the struct iomap_dio object from 2 to 1. Because we were not
the only ones holding a reference on it and 'wait_for_completion' is
set to false, -EIOCBQUEUED is returned to btrfs_direct_read(), which
just returns it up the callchain, up to io_uring;
10) The bio submitted for the first extent (step 5) completes and its
bio endio function, iomap_dio_bio_end_io(), decrements the last
reference on the struct iomap_dio object, resulting in calling
iomap_dio_complete_work() -> iomap_dio_complete().
11) At iomap_dio_complete() we adjust the iocb->ki_pos from X to X + 4K
and return 4K (the amount of io done) to iomap_dio_complete_work();
12) iomap_dio_complete_work() calls the iocb completion callback,
iocb->ki_complete() with a second argument value of 4K (total io
done) and the iocb with the adjust ki_pos of X + 4K. This results
in completing the read request for io_uring, leaving it with a
result of 4K bytes read, and only the first page of the buffer
filled in, while the remaining 3 pages, corresponding to the other
3 extents, were not filled;
13) For the application, the result is unexpected because if we ask
to read N bytes, it expects to get N bytes read as long as those
N bytes don't cross the EOF (i_size).
MariaDB reports this as an error, as it's not expecting a short read,
since it knows it's asking for read operations fully within the i_size
boundary. This is typical in many applications, but it may also be
questionable if they should react to such short reads by issuing more
read calls to get the remaining data. Nevertheless, the short read
happened due to a change in btrfs regarding how it deals with page
faults while in the middle of a read operation, and there's no reason
why btrfs can't have the previous behaviour of returning the whole data
that was requested by the application.
The problem can also be triggered with the following simple program:
/* Get O_DIRECT */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <liburing.h>
int main(int argc, char *argv[])
{
char *foo_path;
struct io_uring ring;
struct io_uring_sqe *sqe;
struct io_uring_cqe *cqe;
struct iovec iovec;
int fd;
long pagesize;
void *write_buf;
void *read_buf;
ssize_t ret;
int i;
if (argc != 2) {
fprintf(stderr, "Use: %s <directory>\n", argv[0]);
return 1;
}
foo_path = malloc(strlen(argv[1]) + 5);
if (!foo_path) {
fprintf(stderr, "Failed to allocate memory for file path\n");
return 1;
}
strcpy(foo_path, argv[1]);
strcat(foo_path, "/foo");
/*
* Create file foo with 2 extents, each with a size matching
* the page size. Then allocate a buffer to read both extents
* with io_uring, using O_DIRECT and IOCB_NOWAIT. Before doing
* the read with io_uring, access the first page of the buffer
* to fault it in, so that during the read we only trigger a
* page fault when accessing the second page of the buffer.
*/
fd = open(foo_path, O_CREAT | O_TRUNC | O_WRONLY |
O_DIRECT, 0666);
if (fd == -1) {
fprintf(stderr,
"Failed to create file 'foo': %s (errno %d)",
strerror(errno), errno);
return 1;
}
pagesize = sysconf(_SC_PAGE_SIZE);
ret = posix_memalign(&write_buf, pagesize, 2 * pagesize);
if (ret) {
fprintf(stderr, "Failed to allocate write buffer\n");
return 1;
}
memset(write_buf, 0xab, pagesize);
memset(write_buf + pagesize, 0xcd, pagesize);
/* Create 2 extents, each with a size matching page size. */
for (i = 0; i < 2; i++) {
ret = pwrite(fd, write_buf + i * pagesize, pagesize,
i * pagesize);
if (ret != pagesize) {
fprintf(stderr,
"Failed to write to file, ret = %ld errno %d (%s)\n",
ret, errno, strerror(errno));
return 1;
}
ret = fsync(fd);
if (ret != 0) {
fprintf(stderr, "Failed to fsync file\n");
return 1;
}
}
close(fd);
fd = open(foo_path, O_RDONLY | O_DIRECT);
if (fd == -1) {
fprintf(stderr,
"Failed to open file 'foo': %s (errno %d)",
strerror(errno), errno);
return 1;
}
ret = posix_memalign(&read_buf, pagesize, 2 * pagesize);
if (ret) {
fprintf(stderr, "Failed to allocate read buffer\n");
return 1;
}
/*
* Fault in only the first page of the read buffer.
* We want to trigger a page fault for the 2nd page of the
* read buffer during the read operation with io_uring
* (O_DIRECT and IOCB_NOWAIT).
*/
memset(read_buf, 0, 1);
ret = io_uring_queue_init(1, &ring, 0);
if (ret != 0) {
fprintf(stderr, "Failed to create io_uring queue\n");
return 1;
}
sqe = io_uring_get_sqe(&ring);
if (!sqe) {
fprintf(stderr, "Failed to get io_uring sqe\n");
return 1;
}
iovec.iov_base = read_buf;
iovec.iov_len = 2 * pagesize;
io_uring_prep_readv(sqe, fd, &iovec, 1, 0);
ret = io_uring_submit_and_wait(&ring, 1);
if (ret != 1) {
fprintf(stderr,
"Failed at io_uring_submit_and_wait()\n");
return 1;
}
ret = io_uring_wait_cqe(&ring, &cqe);
if (ret < 0) {
fprintf(stderr, "Failed at io_uring_wait_cqe()\n");
return 1;
}
printf("io_uring read result for file foo:\n\n");
printf(" cqe->res == %d (expected %d)\n", cqe->res, 2 * pagesize);
printf(" memcmp(read_buf, write_buf) == %d (expected 0)\n",
memcmp(read_buf, write_buf, 2 * pagesize));
io_uring_cqe_seen(&ring, cqe);
io_uring_queue_exit(&ring);
return 0;
}
When running it on an unpatched kernel:
$ gcc io_uring_test.c -luring
$ mkfs.btrfs -f /dev/sda
$ mount /dev/sda /mnt/sda
$ ./a.out /mnt/sda
io_uring read result for file foo:
cqe->res == 4096 (expected 8192)
memcmp(read_buf, write_buf) == -205 (expected 0)
After this patch, the read always returns 8192 bytes, with the buffer
filled with the correct data. Although that reproducer always triggers
the bug in my test vms, it's possible that it will not be so reliable
on other environments, as that can happen if the bio for the first
extent completes and decrements the reference on the struct iomap_dio
object before we do the atomic_dec_and_test() on the reference at
__iomap_dio_rw().
Fix this in btrfs by having btrfs_dio_iomap_begin() return -EAGAIN
whenever we try to satisfy a non blocking IO request (IOMAP_NOWAIT flag
set) over a range that spans multiple extents (or a mix of extents and
holes). This avoids returning success to the caller when we only did
partial IO, which is not optimal for writes and for reads it's actually
incorrect, as the caller doesn't expect to get less bytes read than it has
requested (unless EOF is crossed), as previously mentioned. This is also
the type of behaviour that xfs follows (xfs_direct_write_iomap_begin()),
even though it doesn't use IOMAP_DIO_PARTIAL.
A test case for fstests will follow soon.
Link: https://lore.kernel.org/linux-btrfs/CABVffEM0eEWho+206m470rtM0d9J8ue85TtR-A_oVTuGLWFicA@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/CAHF2GV6U32gmqSjLe=XKgfcZAmLCiH26cJ2OnHGp5x=VAH4OHQ@mail.gmail.com/
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51bd9563b6 upstream
If we do a direct IO read or write when the buffer given by the user is
memory mapped to the file range we are going to do IO, we end up ending
in a deadlock. This is triggered by the new test case generic/647 from
fstests.
For a direct IO read we get a trace like this:
[967.872718] INFO: task mmap-rw-fault:12176 blocked for more than 120 seconds.
[967.874161] Not tainted 5.14.0-rc7-btrfs-next-95 #1
[967.874909] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[967.875983] task:mmap-rw-fault state:D stack: 0 pid:12176 ppid: 11884 flags:0x00000000
[967.875992] Call Trace:
[967.875999] __schedule+0x3ca/0xe10
[967.876015] schedule+0x43/0xe0
[967.876020] wait_extent_bit.constprop.0+0x1eb/0x260 [btrfs]
[967.876109] ? do_wait_intr_irq+0xb0/0xb0
[967.876118] lock_extent_bits+0x37/0x90 [btrfs]
[967.876150] btrfs_lock_and_flush_ordered_range+0xa9/0x120 [btrfs]
[967.876184] ? extent_readahead+0xa7/0x530 [btrfs]
[967.876214] extent_readahead+0x32d/0x530 [btrfs]
[967.876253] ? lru_cache_add+0x104/0x220
[967.876255] ? kvm_sched_clock_read+0x14/0x40
[967.876258] ? sched_clock_cpu+0xd/0x110
[967.876263] ? lock_release+0x155/0x4a0
[967.876271] read_pages+0x86/0x270
[967.876274] ? lru_cache_add+0x125/0x220
[967.876281] page_cache_ra_unbounded+0x1a3/0x220
[967.876291] filemap_fault+0x626/0xa20
[967.876303] __do_fault+0x36/0xf0
[967.876308] __handle_mm_fault+0x83f/0x15f0
[967.876322] handle_mm_fault+0x9e/0x260
[967.876327] __get_user_pages+0x204/0x620
[967.876332] ? get_user_pages_unlocked+0x69/0x340
[967.876340] get_user_pages_unlocked+0xd3/0x340
[967.876349] internal_get_user_pages_fast+0xbca/0xdc0
[967.876366] iov_iter_get_pages+0x8d/0x3a0
[967.876374] bio_iov_iter_get_pages+0x82/0x4a0
[967.876379] ? lock_release+0x155/0x4a0
[967.876387] iomap_dio_bio_actor+0x232/0x410
[967.876396] iomap_apply+0x12a/0x4a0
[967.876398] ? iomap_dio_rw+0x30/0x30
[967.876414] __iomap_dio_rw+0x29f/0x5e0
[967.876415] ? iomap_dio_rw+0x30/0x30
[967.876420] ? lock_acquired+0xf3/0x420
[967.876429] iomap_dio_rw+0xa/0x30
[967.876431] btrfs_file_read_iter+0x10b/0x140 [btrfs]
[967.876460] new_sync_read+0x118/0x1a0
[967.876472] vfs_read+0x128/0x1b0
[967.876477] __x64_sys_pread64+0x90/0xc0
[967.876483] do_syscall_64+0x3b/0xc0
[967.876487] entry_SYSCALL_64_after_hwframe+0x44/0xae
[967.876490] RIP: 0033:0x7fb6f2c038d6
[967.876493] RSP: 002b:00007fffddf586b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011
[967.876496] RAX: ffffffffffffffda RBX: 0000000000001000 RCX: 00007fb6f2c038d6
[967.876498] RDX: 0000000000001000 RSI: 00007fb6f2c17000 RDI: 0000000000000003
[967.876499] RBP: 0000000000001000 R08: 0000000000000003 R09: 0000000000000000
[967.876501] R10: 0000000000001000 R11: 0000000000000246 R12: 0000000000000003
[967.876502] R13: 0000000000000000 R14: 00007fb6f2c17000 R15: 0000000000000000
This happens because at btrfs_dio_iomap_begin() we lock the extent range
and return with it locked - we only unlock in the endio callback, at
end_bio_extent_readpage() -> endio_readpage_release_extent(). Then after
iomap called the btrfs_dio_iomap_begin() callback, it triggers the page
faults that resulting in reading the pages, through the readahead callback
btrfs_readahead(), and through there we end to attempt to lock again the
same extent range (or a subrange of what we locked before), resulting in
the deadlock.
For a direct IO write, the scenario is a bit different, and it results in
trace like this:
[1132.442520] run fstests generic/647 at 2021-08-31 18:53:35
[1330.349355] INFO: task mmap-rw-fault:184017 blocked for more than 120 seconds.
[1330.350540] Not tainted 5.14.0-rc7-btrfs-next-95 #1
[1330.351158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[1330.351900] task:mmap-rw-fault state:D stack: 0 pid:184017 ppid:183725 flags:0x00000000
[1330.351906] Call Trace:
[1330.351913] __schedule+0x3ca/0xe10
[1330.351930] schedule+0x43/0xe0
[1330.351935] btrfs_start_ordered_extent+0x108/0x1c0 [btrfs]
[1330.352020] ? do_wait_intr_irq+0xb0/0xb0
[1330.352028] btrfs_lock_and_flush_ordered_range+0x8c/0x120 [btrfs]
[1330.352064] ? extent_readahead+0xa7/0x530 [btrfs]
[1330.352094] extent_readahead+0x32d/0x530 [btrfs]
[1330.352133] ? lru_cache_add+0x104/0x220
[1330.352135] ? kvm_sched_clock_read+0x14/0x40
[1330.352138] ? sched_clock_cpu+0xd/0x110
[1330.352143] ? lock_release+0x155/0x4a0
[1330.352151] read_pages+0x86/0x270
[1330.352155] ? lru_cache_add+0x125/0x220
[1330.352162] page_cache_ra_unbounded+0x1a3/0x220
[1330.352172] filemap_fault+0x626/0xa20
[1330.352176] ? filemap_map_pages+0x18b/0x660
[1330.352184] __do_fault+0x36/0xf0
[1330.352189] __handle_mm_fault+0x1253/0x15f0
[1330.352203] handle_mm_fault+0x9e/0x260
[1330.352208] __get_user_pages+0x204/0x620
[1330.352212] ? get_user_pages_unlocked+0x69/0x340
[1330.352220] get_user_pages_unlocked+0xd3/0x340
[1330.352229] internal_get_user_pages_fast+0xbca/0xdc0
[1330.352246] iov_iter_get_pages+0x8d/0x3a0
[1330.352254] bio_iov_iter_get_pages+0x82/0x4a0
[1330.352259] ? lock_release+0x155/0x4a0
[1330.352266] iomap_dio_bio_actor+0x232/0x410
[1330.352275] iomap_apply+0x12a/0x4a0
[1330.352278] ? iomap_dio_rw+0x30/0x30
[1330.352292] __iomap_dio_rw+0x29f/0x5e0
[1330.352294] ? iomap_dio_rw+0x30/0x30
[1330.352306] btrfs_file_write_iter+0x238/0x480 [btrfs]
[1330.352339] new_sync_write+0x11f/0x1b0
[1330.352344] ? NF_HOOK_LIST.constprop.0.cold+0x31/0x3e
[1330.352354] vfs_write+0x292/0x3c0
[1330.352359] __x64_sys_pwrite64+0x90/0xc0
[1330.352365] do_syscall_64+0x3b/0xc0
[1330.352369] entry_SYSCALL_64_after_hwframe+0x44/0xae
[1330.352372] RIP: 0033:0x7f4b0a580986
[1330.352379] RSP: 002b:00007ffd34d75418 EFLAGS: 00000246 ORIG_RAX: 0000000000000012
[1330.352382] RAX: ffffffffffffffda RBX: 0000000000001000 RCX: 00007f4b0a580986
[1330.352383] RDX: 0000000000001000 RSI: 00007f4b0a3a4000 RDI: 0000000000000003
[1330.352385] RBP: 00007f4b0a3a4000 R08: 0000000000000003 R09: 0000000000000000
[1330.352386] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
[1330.352387] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Unlike for reads, at btrfs_dio_iomap_begin() we return with the extent
range unlocked, but later when the page faults are triggered and we try
to read the extents, we end up btrfs_lock_and_flush_ordered_range() where
we find the ordered extent for our write, created by the iomap callback
btrfs_dio_iomap_begin(), and we wait for it to complete, which makes us
deadlock since we can't complete the ordered extent without reading the
pages (the iomap code only submits the bio after the pages are faulted
in).
Fix this by setting the nofault attribute of the given iov_iter and retry
the direct IO read/write if we get an -EFAULT error returned from iomap.
For reads, also disable page faults completely, this is because when we
read from a hole or a prealloc extent, we can still trigger page faults
due to the call to iov_iter_zero() done by iomap - at the moment, it is
oblivious to the value of the ->nofault attribute of an iov_iter.
We also need to keep track of the number of bytes written or read, and
pass it to iomap_dio_rw(), as well as use the new flag IOMAP_DIO_PARTIAL.
This depends on the iov_iter and iomap changes introduced in commit
c03098d4b9 ("Merge tag 'gfs2-v5.15-rc5-mmap-fault' of
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2").
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b01b2d72da upstream
Also disable page faults during direct I/O requests and implement a
similar kind of retry logic as in the buffered I/O case.
The retry logic in the direct I/O case differs from the buffered I/O
case in the following way: direct I/O doesn't provide the kinds of
consistency guarantees between concurrent reads and writes that buffered
I/O provides, so once we lose the inode glock while faulting in user
pages, we always resume the operation. We never need to return a
partial read or write.
This locking problem was originally reported by Jan Kara. Linus came up
with the idea of disabling page faults. Many thanks to Al Viro and
Matthew Wilcox for their feedback.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3337ab08d0 upstream
Introduce a new nofault flag to indicate to iov_iter_get_pages not to
fault in user pages.
This is implemented by passing the FOLL_NOFAULT flag to get_user_pages,
which causes get_user_pages to fail when it would otherwise fault in a
page. We'll use the ->nofault flag to prevent iomap_dio_rw from faulting
in pages when page faults are not allowed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55b8fe703b upstream
Introduce a new FOLL_NOFAULT flag that causes get_user_pages to return
-EFAULT when it would otherwise trigger a page fault. This is roughly
similar to FOLL_FAST_ONLY but available on all architectures, and less
fragile.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fdccaa0d1 upstream
Add a done_before argument to iomap_dio_rw that indicates how much of
the request has already been transferred. When the request succeeds, we
report that done_before additional bytes were tranferred. This is
useful for finishing a request asynchronously when part of the request
has already been completed synchronously.
We'll use that to allow iomap_dio_rw to be used with page faults
disabled: when a page fault occurs while submitting a request, we
synchronously complete the part of the request that has already been
submitted. The caller can then take care of the page fault and call
iomap_dio_rw again for the rest of the request, passing in the number of
bytes already tranferred.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97308f8b0d upstream
In iomap_dio_rw, when iomap_apply returns an -EFAULT error and the
IOMAP_DIO_PARTIAL flag is set, complete the request synchronously and
return a partial result. This allows the caller to deal with the page
fault and retry the remainder of the request.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42c498c18a upstream
When a user copy fails in one of the helpers of iomap_dio_rw, fail with
-EFAULT instead of returning 0. This matches what iomap_dio_bio_actor
returns when it gets an -EFAULT from bio_iov_iter_get_pages. With these
changes, iomap_dio_actor now consistently fails with -EFAULT when a user
page cannot be faulted in.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00bfe02f47 upstream
In the .read_iter and .write_iter file operations, we're accessing
user-space memory while holding the inode glock. There is a possibility
that the memory is mapped to the same file, in which case we'd recurse
on the same glock.
We could detect and work around this simple case of recursive locking,
but more complex scenarios exist that involve multiple glocks,
processes, and cluster nodes, and working around all of those cases
isn't practical or even possible.
Avoid these kinds of problems by disabling page faults while holding the
inode glock. If a page fault would occur, we either end up with a
partial read or write or with -EFAULT if nothing could be read or
written. In either case, we know that we're not done with the
operation, so we indicate that we're willing to give up the inode glock
and then we fault in the missing pages. If that made us lose the inode
glock, we return a partial read or write. Otherwise, we resume the
operation.
This locking problem was originally reported by Jan Kara. Linus came up
with the idea of disabling page faults. Many thanks to Al Viro and
Matthew Wilcox for their feedback.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b223f7065 upstream
Now that gfs2_file_buffered_write is the only remaining user of
ip->i_gh, we can move the glock holder to the stack (or rather, use the
one we already have on the stack); there is no need for keeping the
holder in the inode anymore.
This is slightly complicated by the fact that we're using ip->i_gh for
the statfs inode in gfs2_file_buffered_write as well. Writing to the
statfs inode isn't very common, so allocate the statfs holder
dynamically when needed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b924bdab74 upstream
So far, for buffered writes, we were taking the inode glock in
gfs2_iomap_begin and dropping it in gfs2_iomap_end with the intention of
not holding the inode glock while iomap_write_actor faults in user
pages. It turns out that iomap_write_actor is called inside iomap_begin
... iomap_end, so the user pages were still faulted in while holding the
inode glock and the locking code in iomap_begin / iomap_end was
completely pointless.
Move the locking into gfs2_file_buffered_write instead. We'll take care
of the potential deadlocks due to faulting in user pages while holding a
glock in a subsequent patch.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc732906c2 upstream
This patch introduces a new HIF_MAY_DEMOTE flag and infrastructure that
will allow glocks to be demoted automatically on locking conflicts.
When a locking request comes in that isn't compatible with the locking
state of an active holder and that holder has the HIF_MAY_DEMOTE flag
set, the holder will be demoted before the incoming locking request is
granted.
Note that this mechanism demotes active holders (with the HIF_HOLDER
flag set), while before we were only demoting glocks without any active
holders. This allows processes to keep hold of locks that may form a
cyclic locking dependency; the core glock logic will then break those
dependencies in case a conflicting locking request occurs. We'll use
this to avoid giving up the inode glock proactively before faulting in
pages.
Processes that allow a glock holder to be taken away indicate this by
calling gfs2_holder_allow_demote(), which sets the HIF_MAY_DEMOTE flag.
Later, they call gfs2_holder_disallow_demote() to clear the flag again,
and then they check if their holder is still queued: if it is, they are
still holding the glock; if it isn't, they can re-acquire the glock (or
abort).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6144464937 upstream
Pass the first current glock holder into function may_grant and
deobfuscate the logic there.
While at it, switch from BUG_ON to GLOCK_BUG_ON in may_grant. To make
that build cleanly, de-constify the may_grant arguments.
We're now using function find_first_holder in do_promote, so move the
function's definition above do_promote.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2eb7509a05 upstream
Add a wrapper around iomap_file_buffered_write. We'll add code for when
the operation needs to be retried here later.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cdd591fc86 upstream
Introduce a new fault_in_iov_iter_writeable helper for safely faulting
in an iterator for writing. Uses get_user_pages() to fault in the pages
without actually writing to them, which would be destructive.
We'll use fault_in_iov_iter_writeable in gfs2 once we've determined that
the iterator passed to .read_iter isn't in memory.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6294593e8 upstream
Turn iov_iter_fault_in_readable into a function that returns the number
of bytes not faulted in, similar to copy_to_user, instead of returning a
non-zero value when any of the requested pages couldn't be faulted in.
This supports the existing users that require all pages to be faulted in
as well as new users that are happy if any pages can be faulted in.
Rename iov_iter_fault_in_readable to fault_in_iov_iter_readable to make
sure this change doesn't silently break things.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb523b406c upstream
Turn fault_in_pages_{readable,writeable} into versions that return the
number of bytes not faulted in, similar to copy_to_user, instead of
returning a non-zero value when any of the requested pages couldn't be
faulted in. This supports the existing users that require all pages to
be faulted in as well as new users that are happy if any pages can be
faulted in.
Rename the functions to fault_in_{readable,writeable} to make sure
this change doesn't silently break things.
Neither of these functions is entirely trivial and it doesn't seem
useful to inline them, so move them to mm/gup.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36de991e93 upstream.
Because of commit 9cb2ff1117 ("spi: cadence-quadspi: Disable Auto-HW polling"),
which does a write to the CQSPI_REG_WR_COMPLETION_CTRL register
regardless of any condition. Well, the Cadence QuadSPI controller on
Intel's SoCFPGA platforms does not implement the
CQSPI_REG_WR_COMPLETION_CTRL register, thus a write to this register
results in a crash!
So starting with v5.16, I introduced the patch
98d948eb83 ("spi: cadence-quadspi: fix write completion support"),
which adds the dts compatible "intel,socfpga-qspi" that is specific for
versions that doesn't have the CQSPI_REG_WR_COMPLETION_CTRL register implemented.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
[IA: submitted for linux-5.15.y]
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98d948eb83 upstream.
Some versions of the Cadence QSPI controller does not have the write
completion register implemented(CQSPI_REG_WR_COMPLETION_CTRL). On the
Intel SoCFPGA platform the CQSPI_REG_WR_COMPLETION_CTRL register is
not configured.
Add a quirk to not write to the CQSPI_REG_WR_COMPLETION_CTRL register.
Fixes: 9cb2ff1117 ("spi: cadence-quadspi: Disable Auto-HW polling)
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20211108200854.3616121-1-dinguyen@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[IA: backported for linux=5.15.y]
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45ce4b4f90 upstream
When commit e6ac2450d6 ("bpf: Support bpf program calling kernel function") added
kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier
reg type to the appropriate btf_vmlinux BTF ID, however
commit c25b2ae136 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after
the base register types, and defined other variants using type flag
composition. However, now, the direct usage of reg->type to index into
reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to
out of bounds access and kernel crash on dereference of bad pointer.
[backport note: commit 3363bd0cfb ("bpf: Extend kfunc with PTR_TO_CTX, PTR_TO_MEM
argument support") was introduced after 5.15 and contains an out of bound
reg2btf_ids access. Since that commit hasn't been backported, this patch
doesn't include fix to that access. If we backport that commit in future,
we need to fix its faulting access as well.]
Fixes: c25b2ae136 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220216201943.624869-1-memxor@gmail.com
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 216e3cd2f2 upstream.
Some helper functions may modify its arguments, for example,
bpf_d_path, bpf_get_stack etc. Previously, their argument types
were marked as ARG_PTR_TO_MEM, which is compatible with read-only
mem types, such as PTR_TO_RDONLY_BUF. Therefore it's legitimate,
but technically incorrect, to modify a read-only memory by passing
it into one of such helper functions.
This patch tags the bpf_args compatible with immutable memory with
MEM_RDONLY flag. The arguments that don't have this flag will be
only compatible with mutable memory types, preventing the helper
from modifying a read-only memory. The bpf_args that have
MEM_RDONLY are compatible with both mutable memory and immutable
memory.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-9-haoluo@google.com
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34d3a78c68 upstream.
Tag the return type of {per, this}_cpu_ptr with RDONLY_MEM. The
returned value of this pair of helpers is kernel object, which
can not be updated by bpf programs. Previously these two helpers
return PTR_OT_MEM for kernel objects of scalar type, which allows
one to directly modify the memory. Now with RDONLY_MEM tagging,
the verifier will reject programs that write into RDONLY_MEM.
Fixes: 63d9b80dcf ("bpf: Introducte bpf_this_cpu_ptr()")
Fixes: eaa6bcb71e ("bpf: Introduce bpf_per_cpu_ptr()")
Fixes: 4976b718c3 ("bpf: Introduce pseudo_btf_id")
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-8-haoluo@google.com
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c25b2ae136 upstream.
We have introduced a new type to make bpf_reg composable, by
allocating bits in the type to represent flags.
One of the flags is PTR_MAYBE_NULL which indicates a pointer
may be NULL. This patch switches the qualified reg_types to
use this flag. The reg_types changed in this patch include:
1. PTR_TO_MAP_VALUE_OR_NULL
2. PTR_TO_SOCKET_OR_NULL
3. PTR_TO_SOCK_COMMON_OR_NULL
4. PTR_TO_TCP_SOCK_OR_NULL
5. PTR_TO_BTF_ID_OR_NULL
6. PTR_TO_MEM_OR_NULL
7. PTR_TO_RDONLY_BUF_OR_NULL
8. PTR_TO_RDWR_BUF_OR_NULL
[haoluo: backport notes
There was a reg_type_may_be_null() in adjust_ptr_min_max_vals() in
5.15.x, but didn't exist in the upstream commit. This backport
converted that reg_type_may_be_null() to type_may_be_null() as well.]
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20211217003152.48334-5-haoluo@google.com
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c48073226 upstream.
We have introduced a new type to make bpf_ret composable, by
reserving high bits to represent flags.
One of the flag is PTR_MAYBE_NULL, which indicates a pointer
may be NULL. When applying this flag to ret_types, it means
the returned value could be a NULL pointer. This patch
switches the qualified arg_types to use this flag.
The ret_types changed in this patch include:
1. RET_PTR_TO_MAP_VALUE_OR_NULL
2. RET_PTR_TO_SOCKET_OR_NULL
3. RET_PTR_TO_TCP_SOCK_OR_NULL
4. RET_PTR_TO_SOCK_COMMON_OR_NULL
5. RET_PTR_TO_ALLOC_MEM_OR_NULL
6. RET_PTR_TO_MEM_OR_BTF_ID_OR_NULL
7. RET_PTR_TO_BTF_ID_OR_NULL
This patch doesn't eliminate the use of these names, instead
it makes them aliases to 'RET_PTR_TO_XXX | PTR_MAYBE_NULL'.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-4-haoluo@google.com
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48946bd6a5 upstream.
We have introduced a new type to make bpf_arg composable, by
reserving high bits of bpf_arg to represent flags of a type.
One of the flags is PTR_MAYBE_NULL which indicates a pointer
may be NULL. When applying this flag to an arg_type, it means
the arg can take NULL pointer. This patch switches the
qualified arg_types to use this flag. The arg_types changed
in this patch include:
1. ARG_PTR_TO_MAP_VALUE_OR_NULL
2. ARG_PTR_TO_MEM_OR_NULL
3. ARG_PTR_TO_CTX_OR_NULL
4. ARG_PTR_TO_SOCKET_OR_NULL
5. ARG_PTR_TO_ALLOC_MEM_OR_NULL
6. ARG_PTR_TO_STACK_OR_NULL
This patch does not eliminate the use of these arg_types, instead
it makes them an alias to the 'ARG_XXX | PTR_MAYBE_NULL'.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-3-haoluo@google.com
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d639b9d13a upstream.
There are some common properties shared between bpf reg, ret and arg
values. For instance, a value may be a NULL pointer, or a pointer to
a read-only memory. Previously, to express these properties, enumeration
was used. For example, in order to test whether a reg value can be NULL,
reg_type_may_be_null() simply enumerates all types that are possibly
NULL. The problem of this approach is that it's not scalable and causes
a lot of duplication. These properties can be combined, for example, a
type could be either MAYBE_NULL or RDONLY, or both.
This patch series rewrites the layout of reg_type, arg_type and
ret_type, so that common properties can be extracted and represented as
composable flag. For example, one can write
ARG_PTR_TO_MEM | PTR_MAYBE_NULL
which is equivalent to the previous
ARG_PTR_TO_MEM_OR_NULL
The type ARG_PTR_TO_MEM are called "base type" in this patch. Base
types can be extended with flags. A flag occupies the higher bits while
base types sits in the lower bits.
This patch in particular sets up a set of macro for this purpose. The
following patches will rewrite arg_types, ret_types and reg_types
respectively.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-2-haoluo@google.com
Cc: stable@vger.kernel.org # 5.15.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34243b9ec8 upstream.
The conversion erroneously removed the refcount increment.
In case we can use the percpu template, we need to increment
the refcount, else it will be released when the skb gets freed.
In case the slowpath is taken, the new template already has a
refcount of 1.
Fixes: 7197743776 ("netfilter: conntrack: convert to refcount_t api")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85d825dbf4 upstream.
If the file system does not use bigalloc, calculating the overhead is
cheap, so force the recalculation of the overhead so we don't have to
trust the precalculated overhead in the superblock.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10b01ee92d upstream.
The kernel calculation was underestimating the overhead by not taking
into account the reserved gdt blocks. With this change, the overhead
calculated by the kernel matches the overhead calculation in mke2fs.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2b0b205d1 upstream.
We got issue as follows:
[home]# fsck.ext4 -fn ram0yb
e2fsck 1.45.6 (20-Mar-2020)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Symlink /p3/d14/d1a/l3d (inode #3494) is invalid.
Clear? no
Entry 'l3d' in /p3/d14/d1a (3383) has an incorrect filetype (was 7, should be 0).
Fix? no
As the symlink file size does not match the file content. If the writeback
of the symlink data block failed, ext4_finish_bio() handles the end of IO.
However this function fails to mark the buffer with BH_write_io_error and
so when unmount does journal checkpoint it cannot detect the writeback
error and will cleanup the journal. Thus we've lost the correct data in the
journal area. To solve this issue, mark the buffer as BH_write_io_error in
ext4_finish_bio().
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321144438.201685-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad5cd4f4ee upstream.
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220308185043.GA117678@magnolia
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ae7989c9a upstream.
nf_ct_put() results in a usesless indirection:
nf_ct_put -> nf_conntrack_put -> nf_conntrack_destroy -> rcu readlock +
indirect call of ct_hooks->destroy().
There are two _put helpers:
nf_ct_put and nf_conntrack_put. The latter is what should be used in
code that MUST NOT cause a linker dependency on the conntrack module
(e.g. calls from core network stack).
Everyone else should call nf_ct_put() instead.
A followup patch will convert a few nf_conntrack_put() calls to
nf_ct_put(), in particular from modules that already have a conntrack
dependency such as act_ct or even nf_conntrack itself.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7197743776 upstream.
Convert nf_conn reference counting from atomic_t to refcount_t based api.
refcount_t api provides more runtime sanity checks and will warn on
certain constructs, e.g. refcount_inc() on a zero reference count, which
usually indicates use-after-free.
For this reason template allocation is changed to init the refcount to
1, the subsequenct add operations are removed.
Likewise, init_conntrack() is changed to set the initial refcount to 1
instead refcount_inc().
This is safe because the new entry is not (yet) visible to other cpus.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c69661e22 upstream.
Defer APICv updates that occur while L2 is active until nested VM-Exit,
i.e. until L1 regains control. vmx_refresh_apicv_exec_ctrl() assumes L1
is active and (a) stomps all over vmcs02 and (b) neglects to ever updated
vmcs01. E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no
APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv
becomes unhibited while L2 is active, KVM will set various APICv controls
in vmcs02 and trigger a failed VM-Entry. The kicker is that, unless
running with nested_early_check=1, KVM blames L1 and chaos ensues.
In all cases, ignoring vmcs02 and always deferring the inhibition change
to vmcs01 is correct (or at least acceptable). The ABSENT and DISABLE
inhibitions cannot truly change while L2 is active (see below).
IRQ_BLOCKING can change, but it is firmly a best effort debug feature.
Furthermore, only L2's APIC is accelerated/virtualized to the full extent
possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR
interception will apply to the virtual APIC managed by KVM.
The exception is the SELF_IPI register when x2APIC is enabled, but that's
an acceptable hole.
Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the
MSRs to L2, but for that to work in any sane capacity, L1 would need to
pass through IRQs to L2 as well, and IRQs must be intercepted to enable
virtual interrupt delivery. I.e. exposing Auto EOI to L2 and enabling
VID for L2 are, for all intents and purposes, mutually exclusive.
Lack of dynamic toggling is also why this scenario is all but impossible
to encounter in KVM's current form. But a future patch will pend an
APICv update request _during_ vCPU creation to plug a race where a vCPU
that's being created doesn't get included in the "all vCPUs request"
because it's not yet visible to other vCPUs. If userspaces restores L2
after VM creation (hello, KVM selftests), the first KVM_RUN will occur
while L2 is active and thus service the APICv update request made during
VM creation.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220420013732.3308816-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 423ecfea77 upstream.
Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an
in-kernel local APIC and APICv enabled at the module level. Consuming
kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can
race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens
before the vCPU is fully onlined, i.e. it won't get the request made to
"all" vCPUs. If APICv is globally inhibited between setting apicv_active
and onlining the vCPU, the vCPU will end up running with APICv enabled
and trigger KVM's sanity check.
Mark APICv as active during vCPU creation if APICv is enabled at the
module level, both to be optimistic about it's final state, e.g. to avoid
additional VMWRITEs on VMX, and because there are likely bugs lurking
since KVM checks apicv_active in multiple vCPU creation paths. While
keeping the current behavior of consuming kvm_apicv_activated() is
arguably safer from a regression perspective, force apicv_active so that
vCPU creation runs with deterministic state and so that if there are bugs,
they are found sooner than later, i.e. not when some crazy race condition
is hit.
WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
Modules linked in:
CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014
RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
Call Trace:
<TASK>
vcpu_run arch/x86/kvm/x86.c:10039 [inline]
kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234
kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a
call to KVM_SET_GUEST_DEBUG.
r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0)
r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0)
ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async)
r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async)
r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002)
ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5})
ioctl$KVM_RUN(r2, 0xae80, 0x0)
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Fixes: 8df14af42f ("kvm: x86: Add support for dynamic APICv activation")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
