commit f0a0ccda18 upstream.
Syzbot reported a null-ptr-deref bug:
NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP
frequency < 30 seconds
general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 PID: 3603 Comm: segctord Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google
10/11/2022
RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0
fs/nilfs2/alloc.c:608
Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00
00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7
RSP: 0018:ffffc90003dff830 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d
RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010
RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f
R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158
R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004
FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0
Call Trace:
<TASK>
nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline]
nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193
nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236
nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940
nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline]
nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline]
nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088
nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568
nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018
nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline]
nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045
nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline]
nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
...
If DAT metadata file is corrupted on disk, there is a case where
req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during
a b-tree operation that cascadingly updates ancestor nodes of the b-tree,
because nilfs_dat_commit_alloc() for a lower level block can initialize
the blocknr on the same DAT entry between nilfs_dat_prepare_end() and
nilfs_dat_commit_end().
If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free()
without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and
causes the NULL pointer dereference above in
nilfs_palloc_commit_free_entry() function, which leads to a crash.
Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh
before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free().
This also calls nilfs_error() in that case to notify that there is a fatal
flaw in the filesystem metadata and prevent further operations.
Link: https://lkml.kernel.org/r/00000000000097c20205ebaea3d6@google.com
Link: https://lkml.kernel.org/r/20221114040441.1649940-1-zhangpeng362@huawei.com
Link: https://lkml.kernel.org/r/20221119120542.17204-1-konishi.ryusuke@gmail.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ebe05ee8e98f755f61d0@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dcc14cfd7d ]
Both p9_fd_create_tcp() and p9_fd_create_unix() will call
p9_socket_open(). If the creation of p9_trans_fd fails,
p9_fd_create_tcp() and p9_fd_create_unix() will return an
error directly instead of releasing the cscoket, which will
result in a socket leak.
This patch adds sock_release() to fix the leak issue.
Fixes: 6b18662e23 ("9p connect fixes")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
ACKed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8f79dccd3 ]
The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_register_client() failed, the NTB client device is not
unregistered.
Fix by unregister NTB client device when ntb_transport_register_client()
failed.
Fixes: 548c237c0a ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 369eb2c9f1 ]
I got a null-ptr-deref report as following when doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x23e/0x2d0
bus_remove_device+0x1bd/0x240
device_del+0x357/0x770
phy_device_remove+0x11/0x30
mdiobus_unregister+0xa5/0x140
release_nodes+0x6a/0xa0
devres_release_all+0xf8/0x150
device_unbind_cleanup+0x19/0xd0
//probe path:
phy_device_register()
device_add()
phy_connect
phy_attach_direct() //set device driver
probe() //it's failed, driver is not bound
device_bind_driver() // probe failed, it's not called
//remove path:
phy_device_remove()
device_del()
device_release_driver_internal()
__device_release_driver() //dev->drv is not NULL
klist_remove() <- knode_driver is not added yet, cause null-ptr-deref
In phy_attach_direct(), after setting the 'dev->driver', probe() fails,
device_bind_driver() is not called, so the knode_driver->n_klist is not
set, then it causes null-ptr-deref in __device_release_driver() while
deleting device. Fix this by setting dev->driver to NULL in the error
path in phy_attach_direct().
Fixes: e13934563d ("[PATCH] PHY Layer fixup")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dbd6e4ce1 ]
The watchdog timer is used to monitor whether the process
of transmitting data is timeout. If we use qlcnic driver,
the dev_watchdog() that is the timer handler of watchdog
timer will call qlcnic_tx_timeout() to process the timeout.
But the qlcnic_tx_timeout() calls msleep(), as a result,
the sleep-in-atomic-context bugs will happen. The processes
are shown below:
(atomic context)
dev_watchdog
qlcnic_tx_timeout
qlcnic_83xx_idc_request_reset
qlcnic_83xx_lock_driver
msleep
---------------------------
(atomic context)
dev_watchdog
qlcnic_tx_timeout
qlcnic_83xx_idc_request_reset
qlcnic_83xx_lock_driver
qlcnic_83xx_recover_driver_lock
msleep
Fix by changing msleep() to mdelay(), the mdelay() is
busy-waiting and the bugs could be mitigated.
Fixes: 629263acae ("qlcnic: 83xx CNA inter driver communication mechanism")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f5769a074 ]
If sscanf() return 0, outlen is uninitialized and used in kzalloc(),
this is unexpected. We should return -EINVAL if the string is invalid.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2a87785aa ]
Smatch report warning as follows:
drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn:
'&data->list' not removed from list
If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will
be freed, but data->list will not be removed from driver_data.bmc_data,
then list traversal may cause UAF.
Fix by removeing it from driver_data.bmc_data before free().
Fixes: 57c7c3a0fd ("hwmon: IBM power meter driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221117034423.2935739-1-cuigaosheng1@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc92d9e3de ]
KASAN report out-of-bounds read as follows:
BUG: KASAN: global-out-of-bounds in afe4404_read_raw+0x2ce/0x380
Read of size 4 at addr ffffffffc00e4658 by task cat/278
Call Trace:
afe4404_read_raw
iio_read_channel_info
dev_attr_show
The buggy address belongs to the variable:
afe4404_channel_leds+0x18/0xffffffffffffe9c0
This issue can be reproduce by singe command:
$ cat /sys/bus/i2c/devices/0-0058/iio\:device0/in_intensity6_raw
The array size of afe4404_channel_leds and afe4404_channel_offdacs
are less than channels, so access with chan->address cause OOB read
in afe4404_[read|write]_raw. Fix it by moving access before use them.
Fixes: b36e825764 ("iio: health/afe440x: Use regmap fields")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20221107152010.95937-1-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58143c1ed5 ]
KASAN report out-of-bounds read as follows:
BUG: KASAN: global-out-of-bounds in afe4403_read_raw+0x42e/0x4c0
Read of size 4 at addr ffffffffc02ac638 by task cat/279
Call Trace:
afe4403_read_raw
iio_read_channel_info
dev_attr_show
The buggy address belongs to the variable:
afe4403_channel_leds+0x18/0xffffffffffffe9e0
This issue can be reproduced by singe command:
$ cat /sys/bus/spi/devices/spi0.0/iio\:device0/in_intensity6_raw
The array size of afe4403_channel_leds is less than channels, so access
with chan->address cause OOB read in afe4403_read_raw. Fix it by moving
access before use it.
Fixes: b36e825764 ("iio: health/afe440x: Use regmap fields")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20221107151946.89260-1-weiyongjun@huaweicloud.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aeac4ec8f4 ]
On embedded systems with little memory and no relevant
security concerns, it is beneficial to reduce the size
of the table.
Reducing the size from 2^16 to 2^8 saves 255 KiB
of kernel RAM.
Makes the table size configurable as an expert option.
The size was previously increased from 2^8 to 2^16
in commit 4c2c8f03a5 ("tcp: increase source port perturb table to
2^16").
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 038ee49fef ]
RS485-enabled UART ports on TI Sitara SoCs with active-low polarity
exhibit a Transmit Enable glitch on ->set_termios():
omap8250_restore_regs(), which is called from omap_8250_set_termios(),
sets the TCRTLR bit in the MCR register and clears all other bits,
including RTS. If RTS uses active-low polarity, it is now asserted
for no reason.
The TCRTLR bit is subsequently cleared by writing up->mcr to the MCR
register. That variable is always zero, so the RTS bit is still cleared
(incorrectly so if RTS is active-high).
(up->mcr is not, as one might think, a cache of the MCR register's
current value. Rather, it only caches a single bit of that register,
the AFE bit. And it only does so if the UART supports the AFE bit,
which OMAP does not. For details see serial8250_do_set_termios() and
serial8250_do_set_mctrl().)
Finally at the end of omap8250_restore_regs(), the MCR register is
restored (and RTS deasserted) by a call to up->port.ops->set_mctrl()
(which equals serial8250_set_mctrl()) and serial8250_em485_stop_tx().
So there's an RTS glitch between setting TCRTLR and calling
serial8250_em485_stop_tx(). Avoid by using a read-modify-write
when setting TCRTLR.
While at it, drop a redundant initialization of up->mcr. As explained
above, the variable isn't used by the driver and it is already
initialized to zero because it is part of the static struct
serial8250_ports[] declared in 8250_core.c. (Static structs are
initialized to zero per section 6.7.8 nr. 10 of the C99 standard.)
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Su Bao Cheng <baocheng.su@siemens.com>
Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/6554b0241a2c7fd50f32576fdbafed96709e11e8.1664278942.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 512c5ca01a upstream.
When extending segments, nilfs_sufile_alloc() is called to get an
unassigned segment, then mark it as dirty to avoid accidentally allocating
the same segment in the future.
But for some special cases such as a corrupted image it can be unreliable.
If such corruption of the dirty state of the segment occurs, nilfs2 may
reallocate a segment that is in use and pick the same segment for writing
twice at the same time.
This will cause the problem reported by syzkaller:
https://syzkaller.appspot.com/bug?id=c7c4748e11ffcc367cef04f76e02e931833cbd24
This case started with segbuf1.segnum = 3, nextnum = 4 when constructed.
It supposed segment 4 has already been allocated and marked as dirty.
However the dirty state was corrupted and segment 4 usage was not dirty.
For the first time nilfs_segctor_extend_segments() segment 4 was allocated
again, which made segbuf2 and next segbuf3 had same segment 4.
sb_getblk() will get same bh for segbuf2 and segbuf3, and this bh is added
to both buffer lists of two segbuf. It makes the lists broken which
causes NULL pointer dereference.
Fix the problem by setting usage as dirty every time in
nilfs_sufile_mark_dirty(), which is called during constructing current
segment to be written out and before allocating next segment.
[chenzhongjin@huawei.com: add lock protection per Ryusuke]
Link: https://lkml.kernel.org/r/20221121091141.214703-1-chenzhongjin@huawei.com
Link: https://lkml.kernel.org/r/20221118063304.140187-1-chenzhongjin@huawei.com
Fixes: 9ff05123e3 ("nilfs2: segment constructor")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reported-by: <syzbot+77e4f0...@syzkaller.appspotmail.com>
Reported-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 869e4ae4cd ]
Add FORCE to placate a warning from make:
arch/nios2/boot/Makefile:24: FORCE prerequisite is missing
Fixes: 2fc8483fdc ("nios2: Build infrastructure")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e3b03bf29d upstream.
Commit 1c199f2878 ("kbuild: document recursive dependency limitation
/ resolution") probably intended to show a hint along with "recursive
dependency detected!" error, but it missed to add {...} guard, and the
hint is displayed in every loop of the dep_stack traverse, annoyingly.
This error was detected by GCC's -Wmisleading-indentation when switching
to build-time generation of lexer/parser.
scripts/kconfig/symbol.c: In function ‘sym_check_print_recursive’:
scripts/kconfig/symbol.c:1150:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (stack->sym == last_sym)
^~
scripts/kconfig/symbol.c:1153:4: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
fprintf(stderr, "For a resolution refer to Documentation/kbuild/kconfig-language.txt\n");
^~~~~~~
I could simply add {...} to surround the three fprintf(), but I rather
chose to move the hint after the loop to make the whole message readable.
Fixes: 1c199f2878 ("kbuild: document recursive dependency limitation / resolution"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ad09d956f upstream.
In iio_register_sw_trigger_type(), configfs_register_default_group() is
possible to fail, but the entry add to iio_trigger_types_list is not
deleted.
This leaves wild in iio_trigger_types_list, which can cause page fault
when module is loading again. So fix this by list_del(&t->list) in error
path.
BUG: unable to handle page fault for address: fffffbfff81d7400
Call Trace:
<TASK>
iio_register_sw_trigger_type
do_one_initcall
do_init_module
load_module
...
Fixes: b662f809d4 ("iio: core: Introduce IIO software triggers")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221108032802.168623-1-chenzhongjin@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f44e07a8af ]
The size of the TOD programmable field was incorrectly increased from
four to eight bytes with commit 1a2c5840ac ("s390/dump: cleanup CPU
save area handling").
This leads to an elf notes section NT_S390_TODPREG which has a size of
eight instead of four bytes in case of kdump, however even worse is
that the contents is incorrect: it is supposed to contain only the
contents of the TOD programmable field, but in fact contains a mix of
the TOD programmable field (32 bit upper bits) and parts of the CPU
timer register (lower 32 bits).
Fix this by simply changing the size of the todpreg field within the
save area structure. This will implicitly also fix the size of the
corresponding elf notes sections.
This also gets rid of this compile time warning:
in function ‘fortify_memcpy_chk’,
inlined from ‘save_area_add_regs’ at arch/s390/kernel/crash_dump.c:99:2:
./include/linux/fortify-string.h:413:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field
(2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 1a2c5840ac ("s390/dump: cleanup CPU save area handling")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c60c152230 ]
The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered. The fix is to change && to ||.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40781bfb83 ]
When IPv6 module initializing in xfrm6_init(), register_pernet_subsys()
is possible to fail but its return value is ignored.
If IPv6 initialization fails later and xfrm6_fini() is called,
removing uninitialized list in xfrm6_net_ops will cause null-ptr-deref:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 330 Comm: insmod
RIP: 0010:unregister_pernet_operations+0xc9/0x450
Call Trace:
<TASK>
unregister_pernet_subsys+0x31/0x3e
xfrm6_fini+0x16/0x30 [ipv6]
ip6_route_init+0xcd/0x128 [ipv6]
inet6_init+0x29c/0x602 [ipv6]
...
Fix it by catching the error return value of register_pernet_subsys().
Fixes: 8d068875ca ("xfrm: make gc_thresh configurable in all namespaces")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11c1095651 ]
Syz reported the following issue:
kernel BUG at lib/list_debug.c:53!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:__list_del_entry_valid.cold+0x5c/0x72
Call Trace:
<TASK>
p9_fd_cancel+0xb1/0x270
p9_client_rpc+0x8ea/0xba0
p9_client_create+0x9c0/0xed0
v9fs_session_init+0x1e0/0x1620
v9fs_mount+0xba/0xb80
legacy_get_tree+0x103/0x200
vfs_get_tree+0x89/0x2d0
path_mount+0x4c0/0x1ac0
__x64_sys_mount+0x33b/0x430
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
The process is as follows:
Thread A: Thread B:
p9_poll_workfn() p9_client_create()
... ...
p9_conn_cancel() p9_fd_cancel()
list_del() ...
... list_del() //list_del
corruption
There is no lock protection when deleting list in p9_conn_cancel(). After
deleting list in Thread A, thread B will delete the same list again. It
will cause issue of list_del corruption.
Setting req->status to REQ_STATUS_ERROR under lock prevents other
cleanup paths from trying to manipulate req_list.
The other thread can safely check req->status because it still holds a
reference to req at this point.
Link: https://lkml.kernel.org/r/20221110122606.383352-1-shaozhengchao@huawei.com
Fixes: 52f1c45dde ("9p: trans_fd/p9_conn_cancel: drop client lock earlier")
Reported-by: syzbot+9b69b8d10ab4a7d88056@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
[Dominique: add description of the fix in commit message]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2360f9b8c4 ]
In pch_gbe_xmit_frame(), NETDEV_TX_OK will be returned whether
pch_gbe_tx_queue() sends data successfully or not, so pch_gbe_tx_queue()
needs to free skb before returning. But pch_gbe_tx_queue() returns without
freeing skb in case of dma_map_single() fails. Add dev_kfree_skb_any()
to fix it.
Fixes: 77555ee722 ("net: Add Gigabit Ethernet driver of Topcliff PCH")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ad6bded17 ]
Previously we leverage NCI_UNREG and the lock inside nci_close_device to
prevent the race condition between opening a device and closing a
device. However, it still has problem because a failed opening command
will erase the NCI_UNREG flag and allow another opening command to
bypass the status checking.
This fix corrects that by making sure the NCI_UNREG is held.
Reported-by: syzbot+43475bf3cfbd6e41f5b7@syzkaller.appspotmail.com
Fixes: 48b71a9e66 ("NFC: add NCI_UNREG flag to eliminate the race")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 648060902a ]
get_port_from_cmdline() returns an int, yet is assigned to a char, which
is wrong in its own right, but also, with char becoming unsigned, this
poses problems, because -1 is used as an error value. Further
complicating things, fw_init_early_console() is only ever called with a
-1 argument. Fix this up by removing the unused argument from
fw_init_early_console() and treating port as a proper signed integer.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 986d93f55b ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in kernel/auditfilter.c:179:23
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
audit_register_class+0x9d/0x137
audit_classes_init+0x4d/0xb8
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
[PM: remove bad 'Fixes' tag as issue predates git, added in v2.6.6-rc1]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69188df5f6 ]
Fixes a warning that occurs when rc table support is enabled
(IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode
is changed via the exported debugfs attribute.
When the PS mode is changed, a packet is broadcasted via
hwsim_send_nullfunc by creating and transmitting a plain skb with only
header initialized. The ieee80211 rate array in the control buffer is
zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates
is called for the skb with sta parameter set to NULL and thus no
ratetbl can be used. The final rate array then looks like
[-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate.
The issue is fixed by setting the count of the first rate with idx '0'
to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
