Adds a new trace event to be called from clk_set_parent. Some
cpufreq drivers, including Tegra, reparent the cpu clock to a
slower clock while the main pll is relocking, tracing
clk_set_parent allows traces to show how for long the cpu is
running slower.
Uses a separate TRACE_EVENT instead of the clock event class to
allow the event to contain string names for the child and the
parent.
Signed-off-by: Colin Cross <ccross@android.com>
qtaguid tracks the device stats by monitoring when it goes up and down,
then it gets the dev_stats().
But devs don't correctly report stats (either they don't count headers
symmetrically between rx/tx, or they count internal control messages).
Now qtaguid counts the rx/tx bytes/packets during raw:prerouting and
mangle:postrouting (nat is not available in ipv6).
The results are in
/proc/net/xt_qtaguid/iface_stat_fmt
which outputs a format line (bash expansion):
ifname total_skb_{rx,tx}_{bytes,packets}
Added event counters for pre/post handling.
Added extra ctrl_*() pid/uid debugging.
Change-Id: Id84345d544ad1dd5f63e3842cab229e71d339297
Signed-off-by: JP Abgrall <jpa@google.com>
Send notifications when the label becomes active after an idle period.
Send netlink message notifications in addition to sysfs notifications.
Using a uevent with
subsystem=xt_idletimer
INTERFACE=...
STATE={active,inactive}
This is backport from common android-3.0
commit: beb914e987
with uevent support instead of a new netlink message type.
Change-Id: I31677ef00c94b5f82c8457e5bf9e5e584c23c523
Signed-off-by: Ashish Sharma <ashishsharma@google.com>
Signed-off-by: JP Abgrall <jpa@google.com>
This is required to pass the headers_check
Change-Id: Ic4c773973278cbdf1cb4eb66473826cb96ccbfb3
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Commit b641072 ("security: Add AID_NET_RAW and AID_NET_ADMIN capability
check in cap_capable().") introduces additional checks for AID_NET_xxx
macros. Since the header file including those macros are conditionally
included, the checks should also be conditionally executed.
Change-Id: Iaec5208d5b95a46b1ac3f2db8449c661e803fa5b
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Allow speed to drop to flooor frequency but not below, don't pin
to speed at last boost.
Change-Id: I0147c2b7a2e61ba16820605af6baaf09570be787
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Allow speed drop after min_sample_time elapses from last time
the current speed was last re-validated as appropriate for
current load / input boost.
Allow speed bump after min_sample_time (or above_hispeed_delay)
elapses from the time the current speed was originally set.
Change-Id: Ic25687a7a53d25e6544c30c47d7ab6f27a47bee8
Signed-off-by: Todd Poynor <toddpoynor@google.com>
For systems that set a common speed for all CPUs, checking current
speed here could bypass the intermediate hispeed bump decision for
this CPU when another CPU was already at hispeed. This could
result in an overly high setting (for all CPUs) in situations
where all CPUs were about to drop to load levels that map to
hispeed or below.
Change-Id: I186f23dcfc5e2b6336cab8b0327f0c8a9a4482bc
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Apply min_sample_time to the last time the current target speed
was originally requested or re-validated as appropriate for the
current load, not to the time since the current speed was
originally set. Avoids periodic dips in speed during bursty
loads.
Change-Id: I250bda657985de60373f9897cc41f480664d51a1
Signed-off-by: Todd Poynor <toddpoynor@google.com>
If load is above go_hispeed_load, always go to at least hispeed_freq,
even when reducing speed from a higher speed, not just when jumping
up from minimum speed. Avoids running at a lower than intended
speed after a burst of even higher load.
Change-Id: I5b9d2a15ba25ce609b21bac7c724265cf6838dee
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Evaluate spikes in load (below go_hispeed_load) against the maximum
speed supported by the device, not the current speed (which tends to
make it too difficult to raise speed to intermediate levels until
very busy).
Change-Id: Ib937006abf8bedb60891a739acd733e89b732ae0
Signed-off-by: Todd Poynor <toddpoynor@google.com>
When updating the stats for a given uid it would incorrectly assume
IPV4 and pick up the wrong protocol when IPV6.
Change-Id: Iea4a635012b4123bf7aa93809011b7b2040bb3d5
Signed-off-by: JP Abgrall <jpa@google.com>
There was a case that might have seemed like new_tag_stat was not
initialized and actually used.
Added comment explaining why it was impossible, and a BUG()
in case the logic gets changed.
Change-Id: I1eddd1b6f754c08a3bf89f7e9427e5dce1dfb081
Signed-off-by: JP Abgrall <jpa@google.com>
When PowerDown was requested at the same time as ProgBit, the
formatter flush command that follows could get stuck.
Change-Id: Iafb665f61f055819e64ca1dcb60398c656f593e4
Signed-off-by: Arve Hjønnevåg <arve@android.com>
When adb is enabled, only connect the gadget when adbd is ready. If adbd
dies or is restarted (e.g. "adb root"), the gadget is disconnected when
the adb device is close, and it is re-connected once adb re-open the
device.
- Add callbacks to adb, similar to FunctionFs callbacks, to notify the
gadget when the daemon is ready or closed.
- Refcount calls to android_enable/android_disable to enable the gadget
only once all the function daemons are ready.
- Add enable/disble to android_usb_function to notify the function when
it is added/removed from the list of enabled functions.
Change-Id: Id54ff85aec9cf8715c94b4f9bd6137a79ad58bfc
Signed-off-by: Benoit Goby <benoit@android.com>
Fix setting up consoles on multiple fiq debugger devices by
splitting the tty driver init into the initcall, and initializing
the single tty device during probe. Has the side effect of moving
the tty device node to /dev/ttyFIQx, where x is the platform device
id, which should normally match the serial port.
To avoid having to pass a different console=/dev/ttyFIQx for every
device, make the fiq debugger a preferred console that will be used
by default if no console was passed on the command line.
Change-Id: I6cc2670628a41e84615859bc96adba189966d647
Signed-off-by: Colin Cross <ccross@android.com>
kdb expects carriage returns through the serial port to terminate
commands. Modify it to accept the first seen carriage return or
new line as a terminator, but not treat \r\n as two terminators.
Change-Id: I06166017e7703d24310eefcb71c3a7d427088db7
Signed-off-by: Colin Cross <ccross@android.com>
Adds polling tty ops to the fiq debugger console tty, which allows
kgdb to run against an fiq debugger console.
Add a check in do_sysrq to prevent enabling kgdb from the fiq
debugger unless a flag (writable only by root) has been set. This
should make it safe to enable KGDB on a production device.
Also add a shortcut to enable the console and kgdb together, to
allow kgdb to be enabled when the shell on the console is not
responding.
Change-Id: Ifc65239ca96c9887431a6a36b9b44a539002f544
Signed-off-by: Colin Cross <ccross@android.com>
Convert all the calls to state->pdata->uart_putc to a debug_putc
helper.
Change-Id: Idc007bd170ff1b51d0325e238105ae0c86d23777
Signed-off-by: Colin Cross <ccross@android.com>
Pass the rest of the reboot command to kernel_restart to allow
reboot bootloader to work from FIQ debugger.
Change-Id: I4e7b366a69268dda17ffcf4c84f2373d15cb1271
Signed-off-by: Colin Cross <ccross@android.com>
Call kernel_restart instead of arch_reset, the ARM reset handling
has changed.
Remove localtimer irq printing, they now show up in the regular
irq stats.
Change-Id: I523da343b292c5711f3e1cbfd766d32eea2da84e
Signed-off-by: Colin Cross <ccross@android.com>
When an ep_out req is dequeued because of userspace freezing,
don't set the error flag.
Change-Id: I680f1a1059b8ac2244aaa069e7d42dc44abf98e9
Signed-off-by: Colin Cross <ccross@android.com>
wait_event_interruptible in adb_read might return -ERESTARTSYS if
userspace is frozen during adb_read or another signal is delivered
to adb. If so, don't set dev->error to avoid resetting the adb
connection.
Change-Id: I5a7baa013a9a3a3b5305de7e6a0d18546a560018
Signed-off-by: Colin Cross <ccross@android.com>
USB accessory mode allows users to connect USB host hardware
specifically designed for Android-powered devices. The accessories
must adhere to the Android accessory protocol outlined in the
http://accessories.android.com documentation. This allows
Android devices that cannot act as a USB host to still interact with
USB hardware. When an Android device is in USB accessory mode, the
attached Android USB accessory acts as the host, provides power
to the USB bus, and enumerates connected devices.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Android Debug Bridge (adb) is a command line tool that lets
users communicate with a Android-powered device. It is used
mainly to debug applications and tranfer files. f_adb implements
the transport layer between the ADB Server (on the host) and the
ADBD daemon (on the device).
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB gadget function driver used by the Android framework to
implement the MTP and PTP protocols. It creates a character device
that provides an interface for fast transfer of files and
supports transferring files greater than 4GB.
Signed-off-by: Mike Lockwood <lockwood@android.com>
The Android Gadget driver is a composite driver that allows
userspace to change at runtime the list of functions enabled in
its configuration and to configure these functions. It supports
multiple functions: acm, adb, rndis, mtp/ptp, mass storage and
accessory.
It is usually controlled by a daemon that changes the configuration
based on user settings. For example, rndis is enabled when the user
enables sharing the phone data connection and adb (Android Debug
Bridge) is only enabled when the user wants to debug applications
for security reasons.
As an example on how to use it, the following shell commands will
make the gadget disconnect from the host and make it be re-enumerated
as a composite with 1 rndis and 2 acm interfaces, and a different
product id:
echo 0 > /sys/class/android_usb/android0/enable
echo rndis,acm > /sys/class/android_usb/android0/functions
echo 2 > /sys/class/android_usb/android0/f_acm/instances
echo 2d01 > /sys/class/android_usb/android0/idProduct
echo 1 > /sys/class/android_usb/android0/enable
The driver requires a gadget controller that supports software
control of the D+ pullup and the controller driver must support
disabling the pullup during composite_bind.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Signed-off-by: Benoit Goby <benoit@android.com>
Add input_register callback which gets called after
hid_configure_usage is called for all the reports
and before the input device is registered. This allows
individual drivers to do extra work like input mapping just
before device registration.
Based on discussions with David Herrmann <dh.herrmann@googlemail.com>
Change-Id: Idab6fb4f7b1e5e569bd0410967288717e9d34c98
Signed-off-by: Jaikumar Ganesh <jaikumarg@android.com>
Changed to add return code to input_configured instead of
adding input_register
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Suspend attempts can abort when the FUSE daemon is already frozen
and a client is waiting uninterruptibly for a response, causing
freezing of tasks to fail.
Use the freeze-friendly wait API, but disregard other signals.
Change-Id: Icefb7e4bbc718ccb76bf3c04daaa5eeea7e0e63c
Signed-off-by: Todd Poynor <toddpoynor@google.com>
This change fixes two problems.
First, it ensures that the hid-multitouch driver does not incorrectly
map GenericDesktop usages that are intended for other applications,
such as a Mouse.
Second, it sets the appropriate input properties so that user-space
can distinguish TouchScreen devices (INPUT_PROP_DIRECT) from
TouchPad devices (INPUT_PROP_POINTER) and configure them accordingly.
Change-Id: I8c2d947929186ffe7cf04b37c76e29b9abecf8cb
Signed-off-by: jeffbrown@android.com
Since rx_bytes accounting does not include Ethernet Headers in
br_input.c, excluding ETH_HLEN on the transmit path for consistent
measurement of packet length on both the Tx and Rx chains.
The clean way would be for Rx to include the eth header, but the
skb len has already been adjusted by the time the br code sees the skb.
This is only a temporary workaround until we can completely ignore or
cleanly fix the skb->len handling.
Change-Id: I910de95a4686b2119da7f1f326e2154ef31f9972
Signed-off-by: Ashish Sharma <ashishsharma@google.com>
When calling:
ipv6_find_hdr(skb, &thoff, -1, NULL)
on a fragmented packet, thoff would be left with a random
value causing callers to read random memory offsets with:
skb_header_pointer(skb, thoff, ...)
Now we force ipv6_find_hdr() to return a failure in this case.
Calling:
ipv6_find_hdr(skb, &thoff, -1, &fragoff)
will set fragoff as expected, and not return a failure.
Change-Id: Ib474e8a4267dd2b300feca325811330329684a88
Signed-off-by: JP Abgrall <jpa@google.com>
The xt_quota2 came from
http://sourceforge.net/projects/xtables-addons/develop
It needed tweaking for it to compile within the kernel tree.
Fixed kmalloc() and create_proc_entry() invocations within
a non-interruptible context.
Removed useless copying of current quota back to the iptable's
struct matchinfo:
- those are per CPU: they will change randomly based on which
cpu gets to update the value.
- they prevent matching a rule: e.g.
-A chain -m quota2 --name q1 --quota 123
can't be followed by
-D chain -m quota2 --name q1 --quota 123
as the 123 will be compared to the struct matchinfo's quota member.
Use the NETLINK NETLINK_NFLOG family to log a single message
when the quota limit is reached.
It uses the same packet type as ipt_ULOG, but
- never copies skb data,
- uses 112 as the event number (ULOG's +1)
It doesn't log if the module param "event_num" is 0.
Change-Id: I021d3b743db3b22158cc49acb5c94d905b501492
Signed-off-by: JP Abgrall <jpa@google.com>
The original xt_quota in the kernel is plain broken:
- counts quota at a per CPU level
(was written back when ubiquitous SMP was just a dream)
- provides no way to count across IPV4/IPV6.
This patch is the original unaltered code from:
http://sourceforge.net/projects/xtables-addons
at commit e84391ce665cef046967f796dd91026851d6bbf3
Change-Id: I19d49858840effee9ecf6cff03c23b45a97efdeb
Signed-off-by: JP Abgrall <jpa@google.com>
