[ Upstream commit de7a670f8defe4ed2115552ad23dea0f432f7be4 ]
When the vsc73xx mdio bus work properly, the generic autonegotiation
configuration works well.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a039eeb71a42c8b13408a1976e300f3898e1be0 ]
`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)`
Therefore, we should use a well-defined function not a bit shift
to find the header length.
It also compresses two lines to a single line.
Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com>
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67927a1b255d883881be9467508e0af9a5e0be9d ]
Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.
Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:
* 1 byte (seen on iOS 4.2.1, 8.4):
* 03: carrier off (mode 0)
* 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
* 03 03 03: carrier off (mode 0)
* 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
* 03 03 03 00: carrier off (mode 0)
* 04 03 03 00: carrier off (mode 1)
* 06 03 03 00: carrier off (mode 4)
* 04 04 03 04: carrier on (mode 0 and 1)
* 06 04 03 04: carrier on (mode 4)
Before this change, the driver always used the first byte of the
response to determine carrier state.
From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.
Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.
Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.
Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6bd41280a44dcc2e0a25ed72617d25f586974a7 ]
Sangsoo reported that a DAC denial error occurred when accessing
files through the ksmbd thread. This patch override fsids for
smb2_query_info().
Reported-by: Sangsoo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a018c1b636e79b60149b41151ded7c2606d8606e ]
Sangsoo reported that a DAC denial error occurred when accessing
files through the ksmbd thread. This patch override fsids for share
path check.
Reported-by: Sangsoo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5cadfbd5a1 upstream.
Add an init flag idicating whether the FUSE_EXPIRE_ONLY flag of
FUSE_NOTIFY_INVAL_ENTRY is effective.
This is needed for backports of this feature, otherwise the server could
just check the protocol version.
Fixes: 4f8d37020e ("fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRY")
Cc: <stable@vger.kernel.org> # v6.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9972605a238339b85bd16b084eed5f18414d22db upstream.
Commit 73f576c04b ("mm: memcontrol: fix cgroup creation failure after
many small jobs") decoupled the memcg IDs from the CSS ID space to fix the
cgroup creation failures. It introduced IDR to maintain the memcg ID
space. The IDR depends on external synchronization mechanisms for
modifications. For the mem_cgroup_idr, the idr_alloc() and idr_replace()
happen within css callback and thus are protected through cgroup_mutex
from concurrent modifications. However idr_remove() for mem_cgroup_idr
was not protected against concurrency and can be run concurrently for
different memcgs when they hit their refcnt to zero. Fix that.
We have been seeing list_lru based kernel crashes at a low frequency in
our fleet for a long time. These crashes were in different part of
list_lru code including list_lru_add(), list_lru_del() and reparenting
code. Upon further inspection, it looked like for a given object (dentry
and inode), the super_block's list_lru didn't have list_lru_one for the
memcg of that object. The initial suspicions were either the object is
not allocated through kmem_cache_alloc_lru() or somehow
memcg_list_lru_alloc() failed to allocate list_lru_one() for a memcg but
returned success. No evidence were found for these cases.
Looking more deeply, we started seeing situations where valid memcg's id
is not present in mem_cgroup_idr and in some cases multiple valid memcgs
have same id and mem_cgroup_idr is pointing to one of them. So, the most
reasonable explanation is that these situations can happen due to race
between multiple idr_remove() calls or race between
idr_alloc()/idr_replace() and idr_remove(). These races are causing
multiple memcgs to acquire the same ID and then offlining of one of them
would cleanup list_lrus on the system for all of them. Later access from
other memcgs to the list_lru cause crashes due to missing list_lru_one.
Link: https://lkml.kernel.org/r/20240802235822.1830976-1-shakeel.butt@linux.dev
Fixes: 73f576c04b ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Adapted over commit 6f0df8e16e ("memcontrol: ensure memcg acquired by id is
properly set up") not in the tree ]
Signed-off-by: Tomas Krcka <krckatom@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6c2f594ed upstream.
syzbot reported a warning in [1] with the following stacktrace:
WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
Call Trace:
<TASK>
map_check_btf kernel/bpf/syscall.c:1024 [inline]
map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198
__sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040
__do_sys_bpf kernel/bpf/syscall.c:5162 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5160 [inline]
__x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With the following btf
[1] DECL_TAG 'a' type_id=4 component_idx=-1
[2] PTR '(anon)' type_id=0
[3] TYPE_TAG 'a' type_id=2
[4] VAR 'a' type_id=3, linkage=static
and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG),
the following WARN_ON_ONCE in btf_type_id_size() is triggered:
if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) &&
!btf_type_is_var(size_type)))
return NULL;
Note that 'return NULL' is the correct behavior as we don't want
a DECL_TAG type to be used as a btf_{key,value}_type_id even
for the case like 'DECL_TAG -> STRUCT'. So there
is no correctness issue here, we just want to silence warning.
To silence the warning, I added DECL_TAG as one of kinds in
btf_type_nosize() which will cause btf_type_id_size() returning
NULL earlier without the warning.
[1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/
Reported-by: syzbot+958967f249155967d42a@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230530205029.264910-1-yhs@fb.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Diogo Jahchan Koike <djahchankoike@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd9253c23aedd61eb5ff11f37a36247cd46faf86 upstream.
If we have 2 threads that are using the same file descriptor and one of
them is doing direct IO writes while the other is doing fsync, we have a
race where we can end up either:
1) Attempt a fsync without holding the inode's lock, triggering an
assertion failures when assertions are enabled;
2) Do an invalid memory access from the fsync task because the file private
points to memory allocated on stack by the direct IO task and it may be
used by the fsync task after the stack was destroyed.
The race happens like this:
1) A user space program opens a file descriptor with O_DIRECT;
2) The program spawns 2 threads using libpthread for example;
3) One of the threads uses the file descriptor to do direct IO writes,
while the other calls fsync using the same file descriptor.
4) Call task A the thread doing direct IO writes and task B the thread
doing fsyncs;
5) Task A does a direct IO write, and at btrfs_direct_write() sets the
file's private to an on stack allocated private with the member
'fsync_skip_inode_lock' set to true;
6) Task B enters btrfs_sync_file() and sees that there's a private
structure associated to the file which has 'fsync_skip_inode_lock' set
to true, so it skips locking the inode's VFS lock;
7) Task A completes the direct IO write, and resets the file's private to
NULL since it had no prior private and our private was stack allocated.
Then it unlocks the inode's VFS lock;
8) Task B enters btrfs_get_ordered_extents_for_logging(), then the
assertion that checks the inode's VFS lock is held fails, since task B
never locked it and task A has already unlocked it.
The stack trace produced is the following:
assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:983!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8
Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020
RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs]
Code: 50 d6 86 c0 e8 (...)
RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246
RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800
RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38
R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800
R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000
FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x24
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x6a/0x90
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? exc_invalid_op+0x50/0x70
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? asm_exc_invalid_op+0x1a/0x20
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? __seccomp_filter+0x31d/0x4f0
__x64_sys_fdatasync+0x4f/0x90
do_syscall_64+0x82/0x160
? do_futex+0xcb/0x190
? __x64_sys_futex+0x10e/0x1d0
? switch_fpu_return+0x4f/0xd0
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Another problem here is if task B grabs the private pointer and then uses
it after task A has finished, since the private was allocated in the stack
of task A, it results in some invalid memory access with a hard to predict
result.
This issue, triggering the assertion, was observed with QEMU workloads by
two users in the Link tags below.
Fix this by not relying on a file's private to pass information to fsync
that it should skip locking the inode and instead pass this information
through a special value stored in current->journal_info. This is safe
because in the relevant section of the direct IO write path we are not
holding a transaction handle, so current->journal_info is NULL.
The following C program triggers the issue:
$ cat repro.c
/* Get the O_DIRECT definition. */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdint.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <pthread.h>
static int fd;
static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset)
{
while (count > 0) {
ssize_t ret;
ret = pwrite(fd, buf, count, offset);
if (ret < 0) {
if (errno == EINTR)
continue;
return ret;
}
count -= ret;
buf += ret;
}
return 0;
}
static void *fsync_loop(void *arg)
{
while (1) {
int ret;
ret = fsync(fd);
if (ret != 0) {
perror("Fsync failed");
exit(6);
}
}
}
int main(int argc, char *argv[])
{
long pagesize;
void *write_buf;
pthread_t fsyncer;
int ret;
if (argc != 2) {
fprintf(stderr, "Use: %s <file path>\n", argv[0]);
return 1;
}
fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666);
if (fd == -1) {
perror("Failed to open/create file");
return 1;
}
pagesize = sysconf(_SC_PAGE_SIZE);
if (pagesize == -1) {
perror("Failed to get page size");
return 2;
}
ret = posix_memalign(&write_buf, pagesize, pagesize);
if (ret) {
perror("Failed to allocate buffer");
return 3;
}
ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL);
if (ret != 0) {
fprintf(stderr, "Failed to create writer thread: %d\n", ret);
return 4;
}
while (1) {
ret = do_write(fd, write_buf, pagesize, 0);
if (ret != 0) {
perror("Write failed");
exit(5);
}
}
return 0;
}
$ mkfs.btrfs -f /dev/sdi
$ mount /dev/sdi /mnt/sdi
$ timeout 10 ./repro /mnt/sdi/foo
Usually the race is triggered within less than 1 second. A test case for
fstests will follow soon.
Reported-by: Paulo Dias <paulo.miguel.dias@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187
Reported-by: Andreas Jahn <jahn-andi@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199
Reported-by: syzbot+4704b3cc972bd76024f1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000044ff540620d7dee2@google.com/
Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c48b5a4cf3125adb679e28ef093f66ff81368d05 upstream.
So it turns out that we have to do two passes of
pti_clone_entry_text(), once before initcalls, such that device and
late initcalls can use user-mode-helper / modprobe and once after
free_initmem() / mark_readonly().
Now obviously mark_readonly() can cause PMD splits, and
pti_clone_pgtable() doesn't like that much.
Allow the late clone to split PMDs so that pagetables stay in sync.
[peterz: Changelog and comments]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/20240806184843.GX37996@noisy.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e58f5142f88320a5b1449f96a146f2f24615c5c7 ]
When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the
first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers
WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference
issue.
Fix it by adding the check in ublk_ctrl_start_recovery() and return
immediately in case of zero 'ub->nr_queues_ready'.
BUG: kernel NULL pointer dereference, address: 0000000000000028
RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x75/0x170
? exc_page_fault+0x64/0x140
? asm_exc_page_fault+0x22/0x30
? ublk_ctrl_start_recovery.constprop.0+0x82/0x180
ublk_ctrl_uring_cmd+0x4f7/0x6c0
? pick_next_task_idle+0x26/0x40
io_uring_cmd+0x9a/0x1b0
io_issue_sqe+0x193/0x3f0
io_wq_submit_work+0x9b/0x390
io_worker_handle_work+0x165/0x360
io_wq_worker+0xcb/0x2f0
? finish_task_switch.isra.0+0x203/0x290
? finish_task_switch.isra.0+0x203/0x290
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: c732a852b4 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-and-tested-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/all/CAGVVp+UvLiS+bhNXV-h2icwX1dyybbYHeQUuH7RYqUvMQf6N3w@mail.gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240904031348.4139545-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcd9e8afd546f6ced378d078345a89bf346d065e ]
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n),
it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function]
97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking debug_fence_init_onstack() with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 214707fc2c ("drm/i915/selftests: Wrap a timer into a i915_sw_fence")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5bf472058ffb43baf6a4cdfe1d7f58c4c194c688)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e83957e8dd7433a69116780d9bad217b00913ea ]
This fixes the LRCLK polarity for sun8i-h3 and sun50i-h6 in i2s mode
which was wrongly inverted.
The LRCLK was being set in reversed logic compared to the DAI format:
inverted LRCLK for SND_SOC_DAIFMT_IB_NF and SND_SOC_DAIFMT_NB_NF; normal
LRCLK for SND_SOC_DAIFMT_IB_IF and SND_SOC_DAIFMT_NB_IF. Such reversed
logic applies properly for DSP_A, DSP_B, LEFT_J and RIGHT_J modes but
not for I2S mode, for which the LRCLK signal results reversed to what
expected on the bus. The issue is due to a misinterpretation of the
LRCLK polarity bit of the H3 and H6 i2s controllers. Such bit in this
case does not mean "0 => normal" or "1 => inverted" according to the
expected bus operation, but it means "0 => frame starts on low edge" and
"1 => frame starts on high edge" (from the User Manuals).
This commit fixes the LRCLK polarity by setting the LRCLK polarity bit
according to the selected bus mode and renames the LRCLK polarity bit
definition to avoid further confusion.
Fixes: dd657eae81 ("ASoC: sun4i-i2s: Fix the LRCK polarity")
Fixes: 73adf87b7a ("ASoC: sun4i-i2s: Add support for H6 I2S")
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240801-asoc-fix-sun4i-i2s-v2-1-a8e4e9daa363@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0be875c5bf03a9676a6bfed9e0f1766922a7dbd ]
The SOF topology loading function sets the device name for the platform
component link. This should be unset when unloading the topology,
otherwise a machine driver unbind/bind or reprobe would complain about
an invalid component as having both its component name and of_node set:
mt8186_mt6366 sound: ASoC: Both Component name/of_node are set for AFE_SOF_DL1
mt8186_mt6366 sound: error -EINVAL: Cannot register card
mt8186_mt6366 sound: probe with driver mt8186_mt6366 failed with error -22
This happens with machine drivers that set the of_node separately.
Clear the SOF link platform name in the topology unload callback.
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240821041006.2618855-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5572a55a6f830ee3f3a994b6b962a5c327d28cb3 ]
If the commands allocation fails in nvmet_tcp_alloc_cmds()
the kernel crashes in nvmet_tcp_release_queue_work() because of
a NULL pointer dereference.
nvmet: failed to install queue 0 cntlid 1 ret 6
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Fix the bug by setting queue->nr_cmds to zero in case
nvmet_tcp_alloc_cmd() fails.
Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6781b962d97bc52715a8db8cc17278cc3c23ebe8 ]
When Tegra audio drivers are built as part of the kernel image,
TIMEOUT_ERR is observed from cbb-fabric. Following is seen on
Jetson AGX Orin during boot:
[ 8.012482] **************************************
[ 8.017423] CPU:0, Error:cbb-fabric, Errmon:2
[ 8.021922] Error Code : TIMEOUT_ERR
[ 8.025966] Overflow : Multiple TIMEOUT_ERR
[ 8.030644]
[ 8.032175] Error Code : TIMEOUT_ERR
[ 8.036217] MASTER_ID : CCPLEX
[ 8.039722] Address : 0x290a0a8
[ 8.043318] Cache : 0x1 -- Bufferable
[ 8.047630] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access
[ 8.054628] Access_Type : Write
[ 8.106130] WARNING: CPU: 0 PID: 124 at drivers/soc/tegra/cbb/tegra234-cbb.c:604 tegra234_cbb_isr+0x134/0x178
[ 8.240602] Call trace:
[ 8.243126] tegra234_cbb_isr+0x134/0x178
[ 8.247261] __handle_irq_event_percpu+0x60/0x238
[ 8.252132] handle_irq_event+0x54/0xb8
These errors happen when MVC device, which is a child of AHUB
device, tries to access its device registers. This happens as
part of call tegra210_mvc_reset_vol_settings() in MVC device
probe().
The root cause of this problem is, the child MVC device gets
probed before the AHUB clock gets enabled. The AHUB clock is
enabled in runtime PM resume of parent AHUB device and due to
the wrong sequence of pm_runtime_enable() in AHUB driver,
runtime PM resume doesn't happen for AHUB device when MVC makes
register access.
Fix this by calling pm_runtime_enable() for parent AHUB device
before of_platform_populate() in AHUB driver. This ensures that
clock becomes available when MVC makes register access.
Fixes: 16e1bcc2ca ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Ritu Chaudhary <rituc@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-3-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88715b6e5d529f4ef3830ad2a893e4624c6af0b8 ]
Patch series "Reimplement huge pages without hugepd on powerpc (8xx, e500,
book3s/64)", v7.
Unlike most architectures, powerpc 8xx HW requires a two-level pagetable
topology for all page sizes. So a leaf PMD-contig approach is not
feasible as such.
Possible sizes on 8xx are 4k, 16k, 512k and 8M.
First level (PGD/PMD) covers 4M per entry. For 8M pages, two PMD entries
must point to a single entry level-2 page table. Until now that was done
using hugepd. This series changes it to use standard page tables where
the entry is replicated 1024 times on each of the two pagetables refered
by the two associated PMD entries for that 8M page.
For e500 and book3s/64 there are less constraints because it is not tied
to the HW assisted tablewalk like on 8xx, so it is easier to use leaf PMDs
(and PUDs).
On e500 the supported page sizes are 4M, 16M, 64M, 256M and 1G. All at
PMD level on e500/32 (mpc85xx) and mix of PMD and PUD for e500/64. We
encode page size with 4 available bits in PTE entries. On e300/32 PGD
entries size is increases to 64 bits in order to allow leaf-PMD entries
because PTE are 64 bits on e500.
On book3s/64 only the hash-4k mode is concerned. It supports 16M pages as
cont-PMD and 16G pages as cont-PUD. In other modes (radix-4k, radix-6k
and hash-64k) the sizes match with PMD and PUD sizes so that's just leaf
entries. The hash processing make things a bit more complex. To ease
things, __hash_page_huge() is modified to bail out when DIRTY or ACCESSED
bits are missing, leaving it to mm core to fix it.
This patch (of 23):
The nohash HTW_IBM (Hardware Table Walk) code is unused since support for
A2 was removed in commit fb5a515704 ("powerpc: Remove platforms/ wsp and
associated pieces") (2014).
The remaining supported CPUs use either no HTW (data_tlb_miss_bolted), or
the e6500 HTW (data_tlb_miss_e6500).
Link: https://lkml.kernel.org/r/cover.1719928057.git.christophe.leroy@csgroup.eu
Link: https://lkml.kernel.org/r/820dd1385ecc931f07b0d7a0fa827b1613917ab6.1719928057.git.christophe.leroy@csgroup.eu
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: d92b5cc29c79 ("powerpc/64e: Define mmu_pte_psize static")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24436be590c6fbb05f6161b0dfba7d9da60214aa ]
This patch tries to works around erratum DS80000789E 6 of the
mcp2518fd, the other variants of the chip family (mcp2517fd and
mcp251863) are probably also affected.
In the bad case, the driver reads a too large head index. In the
original code, the driver always trusted the read value, which caused
old, already processed CAN frames or new, incompletely written CAN
frames to be (re-)processed.
To work around this issue, keep a per FIFO timestamp [1] of the last
valid received CAN frame and compare against the timestamp of every
received CAN frame. If an old CAN frame is detected, abort the
iteration and mark the number of valid CAN frames as processed in the
chip by incrementing the FIFO's tail index.
Further tests showed that this workaround can recognize old CAN
frames, but a small time window remains in which partially written CAN
frames [2] are not recognized but then processed. These CAN frames
have the correct data and time stamps, but the DLC has not yet been
updated.
[1] As the raw timestamp overflows every 107 seconds (at the usual
clock rate of 40 MHz) convert it to nanoseconds with the
timecounter framework and use this to detect stale CAN frames.
Link: https://lore.kernel.org/all/BL3PR11MB64844C1C95CA3BDADAE4D8CCFBC99@BL3PR11MB6484.namprd11.prod.outlook.com [2]
Reported-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Closes: https://lore.kernel.org/all/FR0P281MB1966273C216630B120ABB6E197E89@FR0P281MB1966.DEUP281.PROD.OUTLOOK.COM
Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e793c724b48ca8cae9693bc3be528e85284c126a ]
The mcp251xfd chip is configured to provide a timestamp with each
received and transmitted CAN frame. The timestamp is derived from the
internal free-running timer, which can also be read from the TBC
register via SPI. The timer is 32 bits wide and is clocked by the
external oscillator (typically 20 or 40 MHz).
To avoid confusion, we call this timestamp "timestamp_raw" or "ts_raw"
for short.
Using the timecounter framework, the "ts_raw" is converted to 64 bit
nanoseconds since the epoch. This is what we call "timestamp".
This is a preparation for the next patches which use the "timestamp"
to work around a bug where so far only the "ts_raw" is used.
Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85505e585637a737e4713c1386c30e37c325b82e ]
This is a preparatory patch to work around erratum DS80000789E 6 of
the mcp2518fd, the other variants of the chip family (mcp2517fd and
mcp251863) are probably also affected.
When handling the RX interrupt, the driver iterates over all pending
FIFOs (which are implemented as ring buffers in hardware) and reads
the FIFO header index from the RX FIFO STA register of the chip.
In the bad case, the driver reads a too large head index. In the
original code, the driver always trusted the read value, which caused
old CAN frames that were already processed, or new, incompletely
written CAN frames to be (re-)processed.
Instead of reading and trusting the head index, read the head index
and calculate the number of CAN frames that were supposedly received -
replace mcp251xfd_rx_ring_update() with mcp251xfd_get_rx_len().
The mcp251xfd_handle_rxif_ring() function reads the received CAN
frames from the chip, iterates over them and pushes them into the
network stack. Prepare that the iteration can be stopped if an old CAN
frame is detected. The actual code to detect old or incomplete frames
and abort will be added in the next patch.
Link: https://lore.kernel.org/all/BL3PR11MB64844C1C95CA3BDADAE4D8CCFBC99@BL3PR11MB6484.namprd11.prod.outlook.com
Reported-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Closes: https://lore.kernel.org/all/FR0P281MB1966273C216630B120ABB6E197E89@FR0P281MB1966.DEUP281.PROD.OUTLOOK.COM
Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d49184b7b585f9da7ee546b744525f62117019f6 ]
This is a preparation patch.
Sending the UINC messages followed by incrementing the tail pointer
will be called in more than one place in upcoming patches, so factor
this out into a separate function.
Also make mcp251xfd_handle_rxif_ring_uinc() safe to be called with a
"len" of 0.
Tested-by: Stefan Althöfer <Stefan.Althoefer@janztec.com>
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2488444274c70038eb6b686cba5f1ce48ebb9cdd ]
In a review discussion of the changes to support vCPU hotplug where
a check was added on the GICC being enabled if was online, it was
noted that there is need to map back to the cpu and use that to index
into a cpumask. As such, a valid ID is needed.
If an MPIDR check fails in acpi_map_gic_cpu_interface() it is possible
for the entry in cpu_madt_gicc[cpu] == NULL. This function would
then cause a NULL pointer dereference. Whilst a path to trigger
this has not been established, harden this caller against the
possibility.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-13-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47ec9b417ed9b6b8ec2a941cd84d9de62adc358a ]
If acpi_processor_get_info() returned an error, pr and the associated
pr->throttling.shared_cpu_map were leaked.
The unwind code was in the wrong order wrt to setup, relying on
some unwind actions having no affect (clearing variables that were
never set etc). That makes it harder to reason about so reorder
and add appropriate labels to only undo what was actually set up
in the first place.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240529133446.28446-6-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98f887f820c993e05a12e8aa816c80b8661d4c87 ]
On a ~2000 CPU powerpc system, hard lockups have been observed in the
workqueue code when stop_machine runs (in this case due to CPU hotplug).
This is due to lots of CPUs spinning in multi_cpu_stop, calling
touch_nmi_watchdog() which ends up calling wq_watchdog_touch().
wq_watchdog_touch() writes to the global variable wq_watchdog_touched,
and that can find itself in the same cacheline as other important
workqueue data, which slows down operations to the point of lockups.
In the case of the following abridged trace, worker_pool_idr was in
the hot line, causing the lockups to always appear at idr_find.
watchdog: CPU 1125 self-detected hard LOCKUP @ idr_find
Call Trace:
get_work_pool
__queue_work
call_timer_fn
run_timer_softirq
__do_softirq
do_softirq_own_stack
irq_exit
timer_interrupt
decrementer_common_virt
* interrupt: 900 (timer) at multi_cpu_stop
multi_cpu_stop
cpu_stopper_thread
smpboot_thread_fn
kthread
Fix this by having wq_watchdog_touch() only write to the line if the
last time a touch was recorded exceeds 1/4 of the watchdog threshold.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18e24deb1cc92f2068ce7434a94233741fbd7771 ]
Warn in the case it is called with cpu == -1. This does not appear
to happen anywhere.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15d937d7ca ]
Will need to add supplementary groups to create messages, so add the
general concept of a request extension. A request extension is appended to
the end of the main request. It has a header indicating the size and type
of the extension.
The create security context (fuse_secctx_*) is similar to the generic
request extension, so include that as well in a backward compatible manner.
Add the total extension length to the request header. The offset of the
extension block within the request can be calculated by:
inh->len - inh->total_extlen * 8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: 3002240d1649 ("fuse: fix memory leak in fuse_create_open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 153524053b ]
In general, as of now, in FUSE, direct writes on the same file are
serialized over inode lock i.e we hold inode lock for the full duration of
the write request. I could not find in fuse code and git history a comment
which clearly explains why this exclusive lock is taken for direct writes.
Following might be the reasons for acquiring an exclusive lock but not be
limited to
1) Our guess is some USER space fuse implementations might be relying on
this lock for serialization.
2) The lock protects against file read/write size races.
3) Ruling out any issues arising from partial write failures.
This patch relaxes the exclusive lock for direct non-extending writes only.
File size extending writes might not need the lock either, but we are not
entirely sure if there is a risk to introduce any kind of regression.
Furthermore, benchmarking with fio does not show a difference between patch
versions that take on file size extension a) an exclusive lock and b) a
shared lock.
A possible example of an issue with i_size extending writes are write error
cases. Some writes might succeed and others might fail for file system
internal reasons - for example ENOSPACE. With parallel file size extending
writes it _might_ be difficult to revert the action of the failing write,
especially to restore the right i_size.
With these changes, we allow non-extending parallel direct writes on the
same file with the help of a flag called FOPEN_PARALLEL_DIRECT_WRITES. If
this flag is set on the file (flag is passed from libfuse to fuse kernel as
part of file open/create), we do not take exclusive lock anymore, but
instead use a shared lock that allows non-extending writes to run in
parallel. FUSE implementations which rely on this inode lock for
serialization can continue to do so and serialized direct writes are still
the default. Implementations that do not do write serialization need to be
updated and need to set the FOPEN_PARALLEL_DIRECT_WRITES flag in their file
open/create reply.
On patch review there were concerns that network file systems (or vfs
multiple mounts of the same file system) might have issues with parallel
writes. We believe this is not the case, as this is just a local lock,
which network file systems could not rely on anyway. I.e. this lock is
just for local consistency.
Signed-off-by: Dharmendra Singh <dsingh@ddn.com>
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: 3002240d1649 ("fuse: fix memory leak in fuse_create_open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f8d37020e ]
Add a flag to entry expiration that lets the filesystem expire a dentry
without kicking it out from the cache immediately.
This makes a difference for overmounted dentries, where plain invalidation
would detach all submounts before dropping the dentry from the cache. If
only expiry is set on the dentry, then any overmounts are left alone and
until ->d_revalidate() is called.
Note: ->d_revalidate() is not called for the case of following a submount,
so invalidation will only be triggered for the non-overmounted case. The
dentry could also be mounted in a different mount instance, in which case
any submounts will still be detached.
Suggested-by: Jakob Blomer <jblomer@cern.ch>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: 3002240d1649 ("fuse: fix memory leak in fuse_create_open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2ab9d830262c132ab5db2f571003d80850d56b2a upstream.
Ole reported that event->mmap_mutex is strictly insufficient to
serialize the AUX buffer, add a per RB mutex to fully serialize it.
Note that in the lock order comment the perf_event::mmap_mutex order
was already wrong, that is, it nesting under mmap_lock is not new with
this patch.
Fixes: 45bfb2e504 ("perf: Add AUX area to ring buffer for raw data streams")
Reported-by: Ole <ole@binarygecko.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 471ef0b5a8aaca4296108e756b970acfc499ede4 upstream.
GCC's named address space checks errors out with:
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_exit’:
drivers/clocksource/timer-of.c:29:46: error: passing argument 2 of
‘free_percpu_irq’ from pointer to non-enclosed address space
29 | free_percpu_irq(of_irq->irq, clkevt);
| ^~~~~~
In file included from drivers/clocksource/timer-of.c:8:
./include/linux/interrupt.h:201:43: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
201 | extern void free_percpu_irq(unsigned int, void __percpu *);
| ^~~~~~~~~~~~~~~
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_init’:
drivers/clocksource/timer-of.c:74:51: error: passing argument 4 of
‘request_percpu_irq’ from pointer to non-enclosed address space
74 | np->full_name, clkevt) :
| ^~~~~~
./include/linux/interrupt.h:190:56: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
190 | const char *devname, void __percpu *percpu_dev_id)
Sparse warns about:
timer-of.c:29:46: warning: incorrect type in argument 2 (different address spaces)
timer-of.c:29:46: expected void [noderef] __percpu *
timer-of.c:29:46: got struct clock_event_device *clkevt
timer-of.c:74:51: warning: incorrect type in argument 4 (different address spaces)
timer-of.c:74:51: expected void [noderef] __percpu *percpu_dev_id
timer-of.c:74:51: got struct clock_event_device *clkevt
It appears the code is incorrect as reported by Uros Bizjak:
"The referred code is questionable as it tries to reuse
the clkevent pointer once as percpu pointer and once as generic
pointer, which should be avoided."
This change removes the percpu related code as no drivers is using it.
[Daniel: Fixed the description]
Fixes: dc11bae785 ("clocksource/drivers: Add timer-of common init routine")
Reported-by: Uros Bizjak <ubizjak@gmail.com>
Tested-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20240819100335.2394751-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b8843fcd49827813da80c0f590a17ae4ce93c5d upstream.
In tpm_set_next_event(delta), return -ETIME by wrong cast to int when delta
is larger than INT_MAX.
For example:
tpm_set_next_event(delta = 0xffff_fffe)
{
...
next = tpm_read_counter(); // assume next is 0x10
next += delta; // next will 0xffff_fffe + 0x10 = 0x1_0000_000e
now = tpm_read_counter(); // now is 0x10
...
return (int)(next - now) <= 0 ? -ETIME : 0;
^^^^^^^^^^
0x1_0000_000e - 0x10 = 0xffff_fffe, which is -2 when
cast to int. So return -ETIME.
}
To fix this, introduce a 'prev' variable and check if 'now - prev' is
larger than delta.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-1-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48b9a8dabcc3cf5f961b2ebcd8933bf9204babb7 upstream.
When removing a resource from vmci_resource_table in
vmci_resource_remove(), the search is performed using the resource
handle by comparing context and resource fields.
It is possible though to create two resources with different types
but same handle (same context and resource fields).
When trying to remove one of the resources, vmci_resource_remove()
may not remove the intended one, but the object will still be freed
as in the case of the datagram type in vmci_datagram_destroy_handle().
vmci_resource_table will still hold a pointer to this freed resource
leading to a use-after-free vulnerability.
BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106
print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239
__kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425
kasan_report+0x38/0x51 mm/kasan/report.c:442
vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182
ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444
kref_put include/linux/kref.h:65 [inline]
vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline]
vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195
vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143
__fput+0x261/0xa34 fs/file_table.c:282
task_work_run+0xf0/0x194 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187
exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220
__syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline]
syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313
do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0x0
This change ensures the type is also checked when removing
the resource from vmci_resource_table in vmci_resource_remove().
Fixes: bc63dedb7d ("VMCI: resource object implementation.")
Cc: stable@vger.kernel.org
Reported-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: David Fernandez Gonzalez <david.fernandez.gonzalez@oracle.com>
Link: https://lore.kernel.org/r/20240828154338.754746-1-david.fernandez.gonzalez@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
