[ Upstream commit a5cf054d325e6f362e82fe6d124a1871a4af8174 ]
This file gets linked into nine different modules, which causes a warning:
scripts/Makefile.build:236: drivers/mtd/tests/Makefile: mtd_test.o is added to multiple modules: mtd_nandbiterrs mtd_oobtest mtd_pagetest mtd_readtest mtd_speedtest mtd_stresstest mtd_subpagetest mtd_torturetest
Make it a separate module instead.
Fixes: a995c79228 ("mtd: tests: rename sources in order to link a helper object")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240529095049.1915393-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bdd1c6c87de758750d419eedab7285b95b66417 ]
cur_cpu_spec->cpu_name is appended to ppc_hw_desc before cur_cpu_spec
has taken on its final value. This is illustrated on pseries by
comparing the CPU name as reported at boot ("POWER8E (raw)") to the
contents of /proc/cpuinfo ("POWER8 (architected)"):
$ dmesg | grep Hardware
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 \
of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
$ grep -m 1 ^cpu /proc/cpuinfo
cpu : POWER8 (architected), altivec supported
Some 44x models would appear to be affected as well; see
identical_pvr_fixup().
This results in incorrect CPU information in stack dumps --
ppc_hw_desc is an input to dump_stack_set_arch_desc().
Delay gathering the CPU name until after all potential calls to
identify_cpu().
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: bd649d40e0 ("powerpc: Add PVR & CPU name to hardware description")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240603-fix-cpu-hwdesc-v1-1-945f2850fcaa@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9f7f29f64454bb20896c7d918c3abc3a1aa487b ]
If IORESOURCE_MEM "lpass-rxtx-cdc-dma-lpm" or "lpass-va-cdc-dma-lpm"
resources is not provided in Device Tree due to any error,
platform_get_resource_byname() will return NULL which is later
dereferenced. According to sound/qcom,lpass-cpu.yaml, these resources
are provided, but DT can be broken due to any error. In such cases driver
must be able to protect itself, since the DT is external data for the
driver.
Adjust this issues by adding NULL return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b138706225 ("ASoC: qcom: Add regmap config support for codec dma driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://patch.msgid.link/20240605104953.12072-1-amishin@t-argos.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c5275bf75ec3708d95654195ae4ed80d946d088 ]
When creating a QP, one of the attributes is TS format (timestamp).
In some devices, we have a limitation that all QPs should have the same
ts_format. The ts_format is chosen based on the device's capability.
The qp_ts_format cap resides under the RoCE caps table, and the
cap will be 0 when RoCE is disabled. So when RoCE is disabled, the
value that should be queried is sq_ts_format under HCA caps.
Consider the case when the system supports REAL_TIME_TS format (0x2),
some QPs are created with REAL_TIME_TS as ts_format, and afterwards
RoCE gets disabled. When trying to construct a new QP, we can't use
the qp_ts_format, that is queried from the RoCE caps table, Since it
leads to passing 0x0 (FREE_RUNNING_TS) as the value of the qp_ts_format,
which is different than the ts_format of the previously allocated
QPs REAL_TIME_TS format (0x2).
Thus, to resolve this, read the sq_ts_format, which also reflect
the supported ts format for the QP when RoCE is disabled.
Fixes: 4806f1e2fe ("net/mlx5: Set QP timestamp mode to default")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Link: https://lore.kernel.org/r/32801966eb767c7fd62b8dea3b63991d5fbfe213.1718554199.git.leon@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5953e0647cec703ef436ead37fed48943507b433 ]
drivers/infiniband/hw/mlx4/alias_GUID.c: In function ‘mlx4_ib_init_alias_guid_service’:
drivers/infiniband/hw/mlx4/alias_GUID.c:878:74: error: ‘%d’ directive
output may be truncated writing between 1 and 11 bytes into a region of
size 5 [-Werror=format-truncation=]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:63: note: directive argument in the range [-2147483641, 2147483646]
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/alias_GUID.c:878:17: note: ‘snprintf’ output
between 12 and 22 bytes into a destination of size 15
878 | snprintf(alias_wq_name, sizeof alias_wq_name, "alias_guid%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: a0c64a17ab ("mlx4: Add alias_guid mechanism")
Link: https://lore.kernel.org/r/1951c9500109ca7e36dcd523f8a5f2d0d2a608d1.1718554641.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d2e6992fc956e3308cd5376c18567def4cb3967 ]
Increase size of the name array to avoid truncated output warning.
drivers/infiniband/hw/mlx4/mad.c: In function ‘mlx4_ib_alloc_demux_ctx’:
drivers/infiniband/hw/mlx4/mad.c:2197:47: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 4
[-Werror=format-truncation=]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2197:38: note: directive argument in
the range [-2147483645, 2147483647]
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2197:9: note: ‘snprintf’ output between
10 and 20 bytes into a destination of size 12
2197 | snprintf(name, sizeof(name), "mlx4_ibt%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2205:38: note: directive argument in
the range [-2147483645, 2147483647]
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2205:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2205 | snprintf(name, sizeof(name), "mlx4_ibwi%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:48: error: ‘%d’ directive output
may be truncated writing between 1 and 11 bytes into a region of size 3
[-Werror=format-truncation=]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~
drivers/infiniband/hw/mlx4/mad.c:2213:38: note: directive argument in
the range [-2147483645, 2147483647]
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mad.c:2213:9: note: ‘snprintf’ output between
11 and 21 bytes into a destination of size 12
2213 | snprintf(name, sizeof(name), "mlx4_ibud%d", port);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:244: drivers/infiniband/hw/mlx4/mad.o] Error 1
Fixes: fc06573dfa ("IB/mlx4: Initialize SR-IOV IB support for slaves in master context")
Link: https://lore.kernel.org/r/f3798b3ce9a410257d7e1ec7c9e285f1352e256a.1718554569.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 932bed41217059638c78a75411b7893b121d2162 ]
While updating the cpus node, commit 40c753993e ("powerpc/kexec_file:
Use current CPU info while setting up FDT") first deletes all subnodes
under the /cpus node. However, while adding sub-nodes back, it missed
adding cpus subnodes whose device_type != "cpu", such as l2-cache*,
l3-cache*, ibm,powerpc-cpu-features.
Fix this by only deleting cpus sub-nodes of device_type == "cpus" and
then adding all available nodes with device_type == "cpu".
Fixes: 40c753993e ("powerpc/kexec_file: Use current CPU info while setting up FDT")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240510102235.2269496-3-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0857beff9c1ec8bb421a8b7a721da0f34cc886c0 ]
Move the update_cpus_node() from kexec/{file_load_64.c => core_64.c}
to allow other kexec components to use it.
Later in the series, this function is used for in-kernel updates
to the kdump image during CPU/memory hotplug or online/offline events for
both kexec_load and kexec_file_load syscalls.
No functional changes are intended.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240326055413.186534-5-sourabhjain@linux.ibm.com
Stable-dep-of: 932bed412170 ("powerpc/kexec_file: fix cpus node update to FDT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 119da30d03 ]
The plpks driver uses the H_PKS_GET_CONFIG hcall to retrieve configuration
and status information about the PKS from the hypervisor.
Update _plpks_get_config() to handle some additional fields. Add getter
functions to allow the PKS configuration information to be accessed from
other files. Validate that the values we're getting comply with the spec.
While we're here, move the config struct in _plpks_get_config() off the
stack - it's getting large and we also need to make sure it doesn't cross
a page boundary.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
[ajd: split patch, extend to support additional v3 API fields, minor fixes]
Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-17-ajd@linux.ibm.com
Stable-dep-of: 932bed412170 ("powerpc/kexec_file: fix cpus node update to FDT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcf63d6b8a ]
A number of structures and buffers passed to PKS hcalls have alignment
requirements, which could on occasion cause problems:
- Authorisation structures must be 16-byte aligned and must not cross a
page boundary
- Label structures must not cross page boundaries
- Password output buffers must not cross page boundaries
To ensure correct alignment, we adjust the allocation size of each of
these structures/buffers to be the closest power of 2 that is at least the
size of the structure/buffer (since kmalloc() guarantees that an
allocation of a power of 2 size will be aligned to at least that size).
Reported-by: Benjamin Gray <bgray@linux.ibm.com>
Fixes: 2454a7af0f ("powerpc/pseries: define driver for Platform KeyStore")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-3-ajd@linux.ibm.com
Stable-dep-of: 932bed412170 ("powerpc/kexec_file: fix cpus node update to FDT")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63aec3e4d987fd43237f557460345bca3b51e530 ]
Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.
Fixes: 1daec8cfeb ("clk: qcom: camcc: Add camera clock controller driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240531095142.9688-4-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f38467b5a920be1473710428a93c4e54b6f8a0c1 ]
Update the force mem core bit for UFS ICE clock to force the core on signal
to remain active during halt state of the clk. When retention bit of the
clock is set the memories of the subsystem will retain the logic across
power states.
Fixes: a3cc092196 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240531095142.9688-3-quic_tdas@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b594e6f660 ]
Most Qualcomm branch clocks come with a pretty usual set of bits that
can enable memory retention by means of not turning off parts of the
memory logic. Add them to the common header file and introduce helper
functions for setting them instead of using magic writes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-2-konrad.dybcio@linaro.org
Stable-dep-of: f38467b5a920 ("clk: qcom: gcc-sc7280: Update force mem core bit for UFS ICE clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c93637e6a4c4e1d0e85ef7efac78d066bbb24d96 ]
Avoid large backtrace, it is sufficient to warn the user that there has
been a link problem. Either the link has failed and the system is in need
of maintenance, or the link continues to work and user has been informed.
The message from the warning can be looked up in the sources.
This makes an actual link issue less verbose.
First of all, this controller has a limitation in that the controller
driver has to assist the hardware with transition to L1 link state by
writing L1IATN to PMCTRL register, the L1 and L0 link state switching
is not fully automatic on this controller.
In case of an ASMedia ASM1062 PCIe SATA controller which does not support
ASPM, on entry to suspend or during platform pm_test, the SATA controller
enters D3hot state and the link enters L1 state. If the SATA controller
wakes up before rcar_pcie_wakeup() was called and returns to D0, the link
returns to L0 before the controller driver even started its transition to
L1 link state. At this point, the SATA controller did send an PM_ENTER_L1
DLLP to the PCIe controller and the PCIe controller received it, and the
PCIe controller did set PMSR PMEL1RX bit.
Once rcar_pcie_wakeup() is called, if the link is already back in L0 state
and PMEL1RX bit is set, the controller driver has no way to determine if
it should perform the link transition to L1 state, or treat the link as if
it is in L0 state. Currently the driver attempts to perform the transition
to L1 link state unconditionally, which in this specific case fails with a
PMSR L1FAEG poll timeout, however the link still works as it is already
back in L0 state.
Reduce this warning verbosity. In case the link is really broken, the
rcar_pcie_config_access() would fail, otherwise it will succeed and any
system with this controller and ASM1062 can suspend without generating
a backtrace.
Fixes: 84b5761462 ("PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()")
Link: https://lore.kernel.org/linux-pci/20240511235513.77301-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ffa0e70b2daf9b0271e4960b7c8a2350e2cda08 ]
After 6ab15b5e70 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), ks_pcie_v3_65_add_bus() enabled BAR 0 for both v3.65a and
v4.90a devices. On the AM654x SoC, which uses v4.90a, enabling BAR 0
causes Completion Timeouts when setting up MSI-X. These timeouts delay
boot of the AM654x by about 45 seconds.
Move the BAR 0 initialization to ks_pcie_msi_host_init(), which is only
used for v3.65a devices, and remove ks_pcie_v3_65_add_bus().
[bhelgaas: commit log]
Fixes: 6ab15b5e70 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus")
Link: https://lore.kernel.org/linux-pci/20240328085041.2916899-3-s-vadapalli@ti.com
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Suggested-by: Niklas Cassel <cassel@kernel.org>
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 903534fa7d30214d8ba840ab1cd9e917e0c88e41 ]
pbus_size_mem() keeps the size of the optional resources in
children_add_size. When calculating the PCI bridge window size,
calculate_memsize() lower bounds size by old_size before adding
children_add_size and performing the window size alignment. This
results in double counting for the resources in children_add_size
because old_size may be based on the previous size of the bridge
window after it has already included children_add_size (that is,
size1 in pbus_size_mem() from an earlier invocation of that
function).
As a result, on repeated remove of the bus & rescan cycles the resource
size keeps increasing when children_add_size is non-zero as can be seen
from this extract:
iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB
iomem1: 20000000000-200001fffff : PCI Bus 0000:03 # 2MiB
iomem2: 20000000000-200002fffff : PCI Bus 0000:03 # 3MiB
iomem3: 20000000000-200003fffff : PCI Bus 0000:03 # 4MiB
iomem4: 20000000000-200004fffff : PCI Bus 0000:03 # 5MiB
Solve the double counting by moving old_size check later in
calculate_memsize() so that children_add_size is already accounted for.
After the patch, the bridge window retains its size as expected:
iomem0: 23fffd00000-23fffdfffff : PCI Bus 0000:03 # 1MiB
iomem1: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB
iomem2: 20000000000-200000fffff : PCI Bus 0000:03 # 1MiB
Fixes: a4ac9fea01 ("PCI : Calculate right add_size")
Link: https://lore.kernel.org/r/20240507102523.57320-2-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6c3ea1ec96307dbfbb2f16d96c674c5cc80f445 ]
Remove the unused cif_stack argument and add a protype in oplib_64.h
Commit ef3e035c3a ("sparc64: Fix register corruption in top-most
kernel stack frame during boot.") removed the cif_stack argument to
prom_cif init in the declaration at the caller site and the usage of it
within prom_cif_init, but not in the function signature of the function
itself.
This also fixes the following warning:
arch/sparc/prom/p1275.c:52:6: warning: no previous prototype for ‘prom_cif_init’
Fixes: ef3e035c3a ("sparc64: Fix register corruption in top-most kernel stack frame during boot.")
Link: https://lore.kernel.org/r/20240710094155.458731-3-andreas@gaisler.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65121eff3e4c8c90f8126debf3c369228691c591 ]
If the extended attribute size is not a multiple of block size, the last
block in the EA inode will have uninitialized tail which will get
written to disk. We will never expose the data to userspace but still
this is not a good practice so just zero out the tail of the block as it
isn't going to cause a noticeable performance overhead.
Fixes: e50e5129f3 ("ext4: xattr-in-inode support")
Reported-by: syzbot+9c1fe13fcb51574b249b@syzkaller.appspotmail.com
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240613150234.25176-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7882b0187bbeb647967a7b5998ce4ad26ef68a9a ]
When fast-commit needs to track ranges, it has to handle inodes that have
inlined data in a different way because ext4_fc_write_inode_data(), in the
actual commit path, will attempt to map the required blocks for the range.
However, inodes that have inlined data will have it's data stored in
inode->i_block and, eventually, in the extended attribute space.
Unfortunately, because fast commit doesn't currently support extended
attributes, the solution is to mark this commit as ineligible.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1039883
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Tested-by: Ben Hutchings <benh@debian.org>
Fixes: 9725958bb7 ("ext4: fast commit may miss tracking unwritten range during ftruncate")
Link: https://patch.msgid.link/20240618144312.17786-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4840c00003a2275668a13b82c9f5b1aed80183aa ]
Previously in order to mark the communication with the DS server,
we tried to use NFS_CS_DS in cl_flags. However, this flag would
only be saved for the DS server and in case where DS equals MDS,
the client would not find a matching nfs_client in nfs_match_client
that represents the MDS (but is also a DS).
Instead, don't rely on the NFS_CS_DS but instead use NFS_CS_PNFS.
Fixes: 379e4adfdd ("NFSv4.1: fixup use EXCHGID4_FLAG_USE_PNFS_DS for DS server")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6258cf25d5e3155c3219ab5a79b970eef7996356 ]
Prior to the commit identified below, call_transmit_status() would
handle -EPERM and other errors related to an unreachable server by
falling through to call_status() which added a 3-second delay and
handled the failure as a timeout.
Since that commit, call_transmit_status() falls through to
handle_bind(). For UDP this moves straight on to handle_connect() and
handle_transmit() so we immediately retransmit - and likely get the same
error.
This results in an indefinite loop in __rpc_execute() which triggers a
soft-lockup warning.
For the errors that indicate an unreachable server,
call_transmit_status() should fall back to call_status() as it did
before. This cannot cause the thundering herd that the previous patch
was avoiding, as the call_status() will insert a delay.
Fixes: ed7dc973bd ("SUNRPC: Prevent thundering herd when the socket is not connected")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acd9f2dd23c632568156217aac7a05f5a0313152 ]
Avoid FastReg operations getting MW_BIND_ERR after a reconnect.
rpcrdma_reqs_reset() is called on transport tear-down to get each
rpcrdma_req back into a clean state.
MRs on req->rl_registered are waiting for a FastReg, are already
registered, or are waiting for invalidation. If the transport is
being torn down when reqs_reset() is called, the matching LocalInv
might never be posted. That leaves these MR registered /and/ on
req->rl_free_mrs, where they can be re-used for the next
connection.
Since xprtrdma does not keep specific track of the MR state, it's
not possible to know what state these MRs are in, so the only safe
thing to do is release them immediately.
Fixes: 5de55ce951 ("xprtrdma: Release in-flight MRs on disconnect")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40176714c818b0b6a2ca8213cdb7654fbd49b742 ]
Commit 16c2004d9e ("mfd: omap-usb-tll: Allocate driver data at once")
changed the memory allocation of 'tll' to consolidate it into a single
allocation, introducing an incorrect size calculation.
In particular, the allocation for the array of pointers was converted
into a single-pointer allocation.
The memory allocation used to occur in two steps:
tll = devm_kzalloc(dev, sizeof(struct usbtll_omap), GFP_KERNEL);
tll->ch_clk = devm_kzalloc(dev, sizeof(struct clk *) * tll->nch,
GFP_KERNEL);
And it turned that into the following allocation:
tll = devm_kzalloc(dev, sizeof(*tll) + sizeof(tll->ch_clk[nch]),
GFP_KERNEL);
sizeof(tll->ch_clk[nch]) returns the size of a single pointer instead of
the expected nch pointers.
This bug went unnoticed because the allocation size was small enough to
fit within the minimum size of a memory allocation for this particular
case [1].
The complete allocation can still be done at once with the struct_size
macro, which comes in handy for structures with a trailing flexible
array.
Fix the memory allocation to obtain the original size again.
Link: https://lore.kernel.org/all/202406261121.2FFD65647@keescook/ [1]
Fixes: 16c2004d9e ("mfd: omap-usb-tll: Allocate driver data at once")
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Fixes: commit 16c2004d9e ("mfd: omap-usb-tll: Allocate driver data at once")
Link: https://lore.kernel.org/r/20240626-omap-usb-tll-counted_by-v2-1-4bedf20d1b51@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c879a8c39dd55e7fabdd8d13341f7bc5200db377 ]
Linking a file into two modules can have unintended side-effects
and produces a W=1 warning:
scripts/Makefile.build:236: drivers/mfd/Makefile: rsmu_core.o is added to multiple modules: rsmu-i2c rsmu-spi
Make this one a separate module instead.
Fixes: a1867f85e0 ("mfd: Add Renesas Synchronization Management Unit (SMU) support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240529094856.1869543-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b40934ae32232140e85dc7dc1c3ea0e296986723 ]
In the past, the exclude_guest setting has had no effect on Intel PT
tracing, but that may not be the case in the future.
Set the flag correctly based upon whether KVM is using Intel PT
"Host/Guest" mode, which is determined by the kvm_intel module
parameter pt_mode:
pt_mode=0 System-wide mode : host and guest output to host buffer
pt_mode=1 Host/Guest mode : host/guest output to host/guest
buffers respectively
Fixes: 6e86bfdc4a ("perf intel-pt: Support decoding of guest kernel")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240625104532.11990-3-adrian.hunter@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e750a4b1224142bd8dd057b0d5adf8a5608b7e77 ]
For scenarios, when source change is followed by VIDIOC_STREAMOFF
on output plane, driver should discard any queued OUTPUT
buffers, which are not decoded or dequeued.
Flush with HFI_FLUSH_INPUT does not have any actual impact.
So, fix it, by invoking HFI_FLUSH_ALL, which will flush all
queued buffers.
Fixes: 85872f861d ("media: venus: Mark last capture buffer")
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Nathan Hebert <nhebert@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 907c3fe532253a6ef4eb9c4d67efb71fab58c706 ]
When doing fast_commit replay an infinite loop may occur due to an
uninitialized extent_status struct. ext4_ext_determine_insert_hole() does
not detect the replay and calls ext4_es_find_extent_range(), which will
return immediately without initializing the 'es' variable.
Because 'es' contains garbage, an integer overflow may happen causing an
infinite loop in this function, easily reproducible using fstest generic/039.
This commit fixes this issue by unconditionally initializing the structure
in function ext4_es_find_extent_range().
Thanks to Zhang Yi, for figuring out the real problem!
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20240515082857.32730-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 940b27161afc6ec53fc66245a4fb3518394cdc92 ]
This reverts commit da1afe8e60.
Commit 699a8c7c4b ("leds: Add of_led_get() and led_put()"), introduced in
5.5, added of_led_get() and led_put() but missed a put_device() in
led_put(), thus creating a leak in case the consumer device is removed.
Arguably device removal was not very popular, so this went apparently
unnoticed until 2022. In January 2023 two different patches got merged to
fix the same bug:
- commit da1afe8e60 ("leds: led-core: Fix refcount leak in of_led_get()")
- commit 445110941e ("leds: led-class: Add missing put_device() to led_put()")
They fix the bug in two different ways, which creates no patch conflicts,
and both were merged in v6.2. The result is that now there is one more
put_device() than get_device()s, instead of one less.
Arguably device removal is not very popular yet, so this apparently hasn't
been noticed as well up to now. But it blew up here while I'm working with
device tree overlay insertion and removal. The symptom is an apparently
unrelated list of oopses on device removal, with reasons:
kernfs: can not remove 'uevent', no directory
kernfs: can not remove 'brightness', no directory
kernfs: can not remove 'max_brightness', no directory
...
Here sysfs fails removing attribute files, which is because the device name
changed and so the sysfs path. This is because the device name string got
corrupted, which is because it got freed too early and its memory reused.
Different symptoms could appear in different use cases.
Fix by removing one of the two fixes.
The choice was to remove commit da1afe8e60 because:
* it is calling put_device() inside of_led_get() just after getting the
device, thus it is basically not refcounting the LED device at all
during its entire lifetime
* it does not add a corresponding put_device() in led_get(), so it fixes
only the OF case
The other fix (445110941e) is adding the put_device() in led_put() so it
covers the entire lifetime, and it works even in the non-DT case.
Fixes: da1afe8e60 ("leds: led-core: Fix refcount leak in of_led_get()")
Co-developed-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Hervé Codina <herve.codina@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240625-led-class-device-leak-v2-1-75fdccf47421@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58979ad6330a70450ed78837be3095107d022ea9 ]
The dma sync operation needs to be done with DMA_BIDIRECTIONAL when
the BO is prepared for both read and write operations.
Fixes: a8c21a5451 ("drm/etnaviv: add initial etnaviv DRM driver")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb39d05e67dc24985ff9f5150e71040fa4d60ab8 ]
It's expected that both hist entries are in the same hists when
comparing two. But the current code in the function checks one without
dso sort key and other with the key. This would make the condition true
in any case.
I guess the intention of the original commit was to add '!' for the
right side too. But as it should be the same, let's just remove it.
Fixes: 69849fc5d2 ("perf hists: Move sort__has_dso into struct perf_hpp_list")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240621170528.608772-2-namhyung@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff16aeb9b83441b8458d4235496cf320189a0c60 ]
The 2 second sleep can cause the test to fail on very slow network file
systems because Perf ends up being killed before it finishes starting
up.
Fix it by making the leafloop workload end after a fixed time like the
other workloads so there is no need to kill it after 2 seconds.
Also remove the 1 second start sampling delay because it is similarly
fragile. Instead, search through all samples for a matching one, rather
than just checking the first sample and hoping it's in the right place.
Fixes: cd6382d827 ("perf test arm64: Test unwinding using fame-pointer (fp) mode")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240612140316.3006660-1-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
