In the start of the "vnt_rf_set_txpower" function the "power" variable
is set at most to VNT_RF_MAX_POWER (hex = 0x3f, dec = 63). Then, in the
switch statement there are four comparisons with the "power" variable
against AL7230_PWR_IDX_LEN (dec = 64), VT3226_PWR_IDX_LEN (dec = 64),
VT3342_PWR_IDX_LEN (dec = 64). Due to all the commented comparisons are
to check if the "power" variable is "greater than or equal" to 64, this
never happens. So, remove the logically dead code.
Also, remove all the defines that are no longer required.
Addresses-Coverity-ID: 1230228 ("Logically dead code")
Fixes: f53d9f12c5 ("staging: vt6656: rf.c additional power.")
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200510090950.7633-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rsvtime is the time needed in firmware to process the received
frame time in firmware so they can be the same as vnt_get_rts_duration
or vnt_get_cts_duration where appropriate.
The rts_rrv_time are now all the same timing in vnt_rxtx_rts.
So vnt_get_rtscts_rsvtime_le and and vnt_get_frame_time are no longer
required.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/4c0fe356-7e08-bf66-58b7-5ab683ba9536@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'channel_number' from the structs hif_ind_rx and hif_req_start
is a __le32. Sparse complains this field is not always correctly
accessed:
drivers/staging/wfx/data_rx.c:95:55: warning: incorrect type in argument 1 (different base types)
drivers/staging/wfx/data_rx.c:95:55: expected int chan
drivers/staging/wfx/data_rx.c:95:55: got restricted __le16 const [usertype] channel_number
However, the value of channel_number cannot be greater than 14 (this
device only support 2.4Ghz band). So, we only have to access to the
least significant byte. It is finally easier to declare it as an array
of bytes and only access to the first one.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-17-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'num_tx_confs' from the struct hif_cnf_multi_transmit is a
__le32. Sparse complains this field is not always correctly accessed:
drivers/staging/wfx/hif_rx.c:82:9: warning: restricted __le32 degrades to integer
drivers/staging/wfx/hif_rx.c:87:29: warning: restricted __le32 degrades to integer
However, the value of num_tx_confs cannot be greater than 15. So, we
only have to access to the least significant byte. It is finally easier
to declare it as an array of bytes and only access to the first one.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-16-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'status' appears in most of structs returned by the hardware.
This field is encoded as little endian. Sparse complains this field is
not always correctly accessed:
drivers/staging/wfx/data_rx.c:53:16: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_rx.c:84:16: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_tx.c:526:24: warning: restricted __le32 degrades to integer
drivers/staging/wfx/data_tx.c:569:23: warning: restricted __le32 degrades to integer
drivers/staging/wfx/hif_rx.c:128:33: warning: restricted __le32 degrades to integer
drivers/staging/wfx/./traces.h:401:1: warning: restricted __le32 degrades to integer
drivers/staging/wfx/./traces.h:401:1: warning: restricted __le32 degrades to integer
In most of cases, this field is only compared with HIF_STATUS values.
Finally, it is more convenient to solve the problem by defining the
HIF_STATUS values directly in little endian.
It is also the right time to make some clean up in the HIF_STATUS names.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-15-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse complains about the accesses to the field 'len' from struct hif_msg:
drivers/staging/wfx/bh.c:88:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:88:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:93:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:93:32: warning: cast to restricted __le16
drivers/staging/wfx/bh.c:93:32: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:121:25: warning: incorrect type in argument 2 (different base types)
drivers/staging/wfx/bh.c:121:25: expected unsigned int len
drivers/staging/wfx/bh.c:121:25: got restricted __le16 [usertype] len
drivers/staging/wfx/hif_rx.c:27:22: warning: restricted __le16 degrades to integer
drivers/staging/wfx/hif_rx.c:347:39: warning: incorrect type in argument 7 (different base types)
drivers/staging/wfx/hif_rx.c:347:39: expected unsigned int [usertype] len
drivers/staging/wfx/hif_rx.c:347:39: got restricted __le16 const [usertype] len
drivers/staging/wfx/hif_rx.c:365:39: warning: incorrect type in argument 7 (different base types)
drivers/staging/wfx/hif_rx.c:365:39: expected unsigned int [usertype] len
drivers/staging/wfx/hif_rx.c:365:39: got restricted __le16 const [usertype] len
drivers/staging/wfx/./traces.h:195:1: warning: incorrect type in assignment (different base types)
drivers/staging/wfx/./traces.h:195:1: expected int msg_len
drivers/staging/wfx/./traces.h:195:1: got restricted __le16 const [usertype] len
drivers/staging/wfx/./traces.h:195:1: warning: incorrect type in assignment (different base types)
drivers/staging/wfx/./traces.h:195:1: expected int msg_len
drivers/staging/wfx/./traces.h:195:1: got restricted __le16 const [usertype] len
drivers/staging/wfx/debug.c:319:20: warning: restricted __le16 degrades to integer
drivers/staging/wfx/secure_link.c:85:27: warning: restricted __le16 degrades to integer
drivers/staging/wfx/secure_link.c:85:27: warning: restricted __le16 degrades to integer
Indeed, the attribute len is little-endian. We have to take to the
endianness when we access it.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-14-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct hif_ind_startup is received from the hardware. So it is
declared as little endian. However, it is also stored in the main driver
structure and used on different places in the driver. Sparse complains
about that:
drivers/staging/wfx/data_tx.c:388:43: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:199:9: warning: restricted __le16 degrades to integer
drivers/staging/wfx/bh.c:221:62: warning: restricted __le16 degrades to integer
In order to make Sparse happy and to keep access from the driver easy,
this patch declare hif_ind_startup with native endianness.
On reception of this struct, this patch takes care to do byte-swap and
keep Sparse happy.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200512150414.267198-13-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the chip starts in SDIO mode, the external IRQ (aka Out-Of-Band
IRQ) cannot be used before to configure it. Therefore, the first
exchanges with the chip have to be done without the OOB IRQ.
This patch allow to poll the data until the OOB IRQ is correctly setup.
In order to keep the code simpler, this patch also poll data even if OOB
IRQ is not used.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the SPI implementation use a workqueue to acknowledge IRQ
while the SDIO-OOB implementation use a threaded IRQ.
The threaded also offers the advantage to allow level triggered IRQs.
Uniformize the code and use threaded IRQ in both case. Therefore, prefer
level triggered IRQs if the user does not specify it in the DT.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When used over SDIO bus, device is able to use an external line to
signal IRQs (also called Out-Of-Band IRQ). The current code have several
problems:
1. The ISR cannot directly acknowledge IRQ since access to the bus is
not atomic. This patch use a threaded IRQ to solve that issue.
2. On certain platforms, it is necessary to keep SDIO interruption
enabled (with register SDIO_CCCR_IENx) (this part has inspired from
the brcmfmac driver).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200505123757.39506-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
