[ Upstream commit 28574b08c70e56d34d6f6379326a860b96749051 ]
This commit adds a null check for the set_output_gamma function pointer
in the dcn32_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null, but then it was being
dereferenced without any null check. This could lead to a null pointer
dereference if set_output_gamma is null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d4d2d4346857bf778fafaa97d6f76bb1663e3c9 ]
The current implementation of the fpga manager assumes that the low-level
module registers a driver for the parent device and uses its owner pointer
to take the module's refcount. This approach is problematic since it can
lead to a null pointer dereference while attempting to get the manager if
the parent device does not have a driver.
To address this problem, add a module owner pointer to the fpga_manager
struct and use it to take the module's refcount. Modify the functions for
registering the manager to take an additional owner module parameter and
rename them to avoid conflicts. Use the old function names for helper
macros that automatically set the module that registers the manager as the
owner. This ensures compatibility with existing low-level control modules
and reduces the chances of registering a manager without setting the owner.
Also, update the documentation to keep it consistent with the new interface
for registering an fpga manager.
Other changes: opportunistically move put_device() from __fpga_mgr_get() to
fpga_mgr_get() and of_fpga_mgr_get() to improve code clarity since the
manager device is taken in these functions.
Fixes: 654ba4cc0f ("fpga manager: ensure lifetime with of_fpga_mgr_get")
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240305192926.84886-1-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1da11f822042eb6ef4b6064dc048f157a7852529 ]
The current implementation of the fpga bridge assumes that the low-level
module registers a driver for the parent device and uses its owner pointer
to take the module's refcount. This approach is problematic since it can
lead to a null pointer dereference while attempting to get the bridge if
the parent device does not have a driver.
To address this problem, add a module owner pointer to the fpga_bridge
struct and use it to take the module's refcount. Modify the function for
registering a bridge to take an additional owner module parameter and
rename it to avoid conflicts. Use the old function name for a helper macro
that automatically sets the module that registers the bridge as the owner.
This ensures compatibility with existing low-level control modules and
reduces the chances of registering a bridge without setting the owner.
Also, update the documentation to keep it consistent with the new interface
for registering an fpga bridge.
Other changes: opportunistically move put_device() from __fpga_bridge_get()
to fpga_bridge_get() and of_fpga_bridge_get() to improve code clarity since
the bridge device is taken in these functions.
Fixes: 21aeda950c ("fpga: add fpga bridge framework")
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Russ Weight <russ.weight@linux.dev>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240322171839.233864-1-marpagan@redhat.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e2a8910af01653c1c268984855629d71fb81f404 upstream.
ReparseDataLength is sum of the InodeType size and DataBuffer size.
So to get DataBuffer size it is needed to subtract InodeType's size from
ReparseDataLength.
Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer
at position after the end of the buffer because it does not subtract
InodeType size from the length. Fix this problem and correctly subtract
variable len.
Member InodeType is present only when reparse buffer is large enough. Check
for ReparseDataLength before accessing InodeType to prevent another invalid
memory access.
Major and minor rdev values are present also only when reparse buffer is
large enough. Check for reparse buffer size before calling reparse_mkdev().
Fixes: d5ecebc490 ("smb3: Allow query of symlinks stored as reparse points")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
[use variable name symlink_buf, the other buf->InodeType accesses are
not used in current version so skip]
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d3b793faaab1305994ce568b59d61927235f57b ]
When enabling access to the special register set, Receiver time-out and
RHR interrupts can happen. In this case, the IRQ handler will try to read
from the FIFO thru the RHR register at address 0x00, but address 0x00 is
mapped to DLL register, resulting in erroneous FIFO reading.
Call graph example:
sc16is7xx_startup(): entry
sc16is7xx_ms_proc(): entry
sc16is7xx_set_termios(): entry
sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set
sc16is7xx_port_irq() entry --> IIR is 0x0C
sc16is7xx_handle_rx() entry
sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is
mapped to DLL (LCR=LCR_CONF_MODE_A)
sc16is7xx_set_baud(): exit --> Restore access to general register set
Fix the problem by claiming the efr_lock mutex when accessing the Special
register set.
Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240723125302.1305372-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Resolve minor conflicts ]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ab5cf19fb0e4680f95e506d6c544259bf1111c4 ]
Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow
in sk_dst_gso_max_size(), which may trigger a BUG_ON crash,
because sk->sk_gso_max_size would be much bigger than device limits.
Call Trace:
tcp_write_xmit
tso_segs = tcp_init_tso_segs(skb, mss_now);
tcp_set_skb_tso_segs
tcp_skb_pcount_set
// skb->len = 524288, mss_now = 8
// u16 tso_segs = 524288/8 = 65535 -> 0
tso_segs = DIV_ROUND_UP(skb->len, mss_now)
BUG_ON(!tso_segs)
Add check for the minimum value of gso_max_size and gso_ipv4_max_size.
Fixes: 46e6b992c2 ("rtnetlink: allow GSO maximums to be set on device creation")
Fixes: 9eefedd58a ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241023035213.517386-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Resolve minor conflicts to fix CVE-2024-50258 ]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e28acc9c1ccfcb24c08e020828f69d0a915b06ae ]
Accessing `mr_table->mfc_cache_list` is protected by an RCU lock. In the
following code flow, the RCU read lock is not held, causing the
following error when `RCU_PROVE` is not held. The same problem might
show up in the IPv6 code path.
6.12.0-rc5-kbuilder-01145-gbac17284bdcb #33 Tainted: G E N
-----------------------------
net/ipv4/ipmr_base.c:313 RCU-list traversed in non-reader section!!
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by RetransmitAggre/3519:
#0: ffff88816188c6c0 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x8a/0x290
#1: ffffffff83fcf7a8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_dumpit+0x6b/0x90
stack backtrace:
lockdep_rcu_suspicious
mr_table_dump
ipmr_rtm_dumproute
rtnl_dump_all
rtnl_dumpit
netlink_dump
__netlink_dump_start
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
This is not a problem per see, since the RTNL lock is held here, so, it
is safe to iterate in the list without the RCU read lock, as suggested
by Eric.
To alleviate the concern, modify the code to use
list_for_each_entry_rcu() with the RTNL-held argument.
The annotation will raise an error only if RTNL or RCU read lock are
missing during iteration, signaling a legitimate problem, otherwise it
will avoid this false positive.
This will solve the IPv6 case as well, since ip6mr_rtm_dumproute() calls
this function as well.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241108-ipmr_rcu-v2-1-c718998e209b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e9b0cf9319b4db143014477b0bc4b39894248f1 ]
Fix the physical address calculation of the following to get smp working
on xip kernels.
- secondary_data needed for secondary cpu bootup.
- secondary_startup address passed through psci.
- identity mapped code region needed for enabling mmu for secondary cpus.
Signed-off-by: Harith George <harith.g@alifsemi.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c859900a841b0a6cd9a73d16426465e44cdde29c ]
This is a trivial cleanup, commit c62da0c35d ("mm/vma: define a
default value for VM_DATA_DEFAULT_FLAGS") has unified default values of
VM_DATA_DEFAULT_FLAGS across different platforms.
Apply the same consistency to LoongArch.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8da001ae7af0abd9f6250c02c01a1121074ca60 ]
The audio graph card doesn't mark its subnodes such as multi {}, dpcm {}
and c2c {} as not requiring any suppliers. This causes a hang as Linux
waits for these phantom suppliers to show up on boot.
Make it clear these nodes have no suppliers.
Example error message:
[ 15.208558] platform 2034000.i2s: deferred probe pending: platform: wait for supplier /sound/multi
[ 15.208584] platform sound: deferred probe pending: asoc-audio-graph-card2: parse error
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241108-graph_dt_fix-v1-1-173e2f9603d6@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84b9749a3a704dcc824a88aa8267247c801d51e4 ]
seq_printf is costy, on a system with n CPUs, reading /proc/softirqs
would yield 10*n decimal values, and the extra cost parsing format string
grows linearly with number of cpus. Replace seq_printf with
seq_put_decimal_ull_width have significant performance improvement.
On an 8CPUs system, reading /proc/softirqs show ~40% performance
gain with this patch.
Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 052ef642bd6c108a24f375f9ad174b97b425a50b ]
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240825132131.6643-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1be765b292577c752e0b87bf8c0e92aff6699d8e ]
Fix for Thinkpad's with ECFW showing incorrect fan speed. Some models use
decimal instead of hexadecimal for the speed stored in the EC registers.
For example the rpm register will have 0x4200 instead of 0x1068, here
the actual RPM is "4200" in decimal.
Add a quirk to handle this.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20241105235505.8493-1-vishnuocv@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec61f0bb4feec3345626a2b93b970b6719743997 ]
Some Alienware devices have a key that locks/unlocks the Meta key. This
key triggers a WMI event that should be ignored by the kernel, as it's
handled by internally the firmware.
There is no known way of changing this default behavior. The firmware
would lock/unlock the Meta key, regardless of how the event is handled.
Tested on an Alienware x15 R1.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241031154441.6663-2-kuurtb@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a36b8b84ac4327b90ef5a22bc97cc96a92073330 ]
Fixes the following error:
dell_smbios: Unable to run on non-Dell system
Which is triggered after dell-wmi driver fails to initialize on
Alienware systems, as it depends on dell-smbios.
This effectively extends dell-wmi, dell-smbios and dcdbas support to
Alienware devices, that might share some features of the SMBIOS intereface
calling interface with other Dell products.
Tested on an Alienware X15 R1.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241031154023.6149-2-kuurtb@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e53e4a66bc7430dd2d11c18a86410e3a38d2940 ]
Currently, RK809's BUCK3 regulator is modelled in the driver as a
configurable regulator with 0.5-2.4V voltage range. But the voltage
setting is not actually applied, because when bit 6 of
PMIC_POWER_CONFIG register is set to 0 (default), BUCK3 output voltage
is determined by the external feedback resistor. Fix this, by setting
bit 6 when voltage selection is set. Existing users which do not
specify voltage constraints in their device trees will not be affected
by this change, since no voltage setting is applied in those cases,
and bit 6 is not enabled.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://patch.msgid.link/20241017-rk809-dcdc3-v1-1-e3c3de92f39c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a32aee8f0d987a7cba7fcc28002553361a392048 ]
The tcp_bpf_recvmsg_parser() function, running in user context,
retrieves seq_copied from tcp_sk without holding the socket lock, and
stores it in a local variable seq. However, the softirq context can
modify tcp_sk->seq_copied concurrently, for example, n tcp_read_sock().
As a result, the seq value is stale when it is assigned back to
tcp_sk->copied_seq at the end of tcp_bpf_recvmsg_parser(), leading to
incorrect behavior.
Due to concurrency, the copied_seq field in tcp_bpf_recvmsg_parser()
might be set to an incorrect value (less than the actual copied_seq) at
the end of function: 'WRITE_ONCE(tcp->copied_seq, seq)'. This causes the
'offset' to be negative in tcp_read_sock()->tcp_recv_skb() when
processing new incoming packets (sk->copied_seq - skb->seq becomes less
than 0), and all subsequent packets will be dropped.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Link: https://lore.kernel.org/r/20241028065226.35568-1-mrpre@163.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fce9642c765a18abd1db0339a7d832c29b68456a ]
node_to_amd_nb() is defined to NULL in non-AMD configs:
drivers/platform/x86/amd/hsmp/plat.c: In function 'init_platform_device':
drivers/platform/x86/amd/hsmp/plat.c:165:68: error: dereferencing 'void *' pointer [-Werror]
165 | sock->root = node_to_amd_nb(i)->root;
| ^~
drivers/platform/x86/amd/hsmp/plat.c:165:68: error: request for member 'root' in something not a structure or union
Users of the interface who also allow COMPILE_TEST will cause the above build
error so provide an inline stub to fix that.
[ bp: Massage commit message. ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20241029092329.3857004-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc1308bee1ed03b4d698d77c8bd670d399dcd04d ]
When running watchdog-test with 'make run_tests', the watchdog-test will
be terminated by a timeout signal(SIGTERM) due to the test timemout.
And then, a system reboot would happen due to watchdog not stop. see
the dmesg as below:
```
[ 1367.185172] watchdog: watchdog0: watchdog did not stop!
```
Fix it by registering more signals(including SIGTERM) in watchdog-test,
where its signal handler will stop the watchdog.
After that
# timeout 1 ./watchdog-test
Watchdog Ticking Away!
.
Stopping watchdog ticks...
Link: https://lore.kernel.org/all/20241029031324.482800-1-lizhijian@fujitsu.com/
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9715246ca0bfc9feaec1b4ff5b3d38de65a7025d ]
When starting the suspend flow, HOST_D3_START triggers an _async_
firmware dump collection for debugging purposes. The async worker
may race with suspend flow and fail to get NIC access, resulting in
the following warning:
"Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)"
Fix this by switching to the sync version to ensure the dump
completes before proceeding with the suspend flow, avoiding
potential race issues.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.9aae318cd593.I4b322009f39489c0b1d8893495c887870f73ed9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6668610b4d8ce9a3ee3ed61a9471f62fb5f05bf9 ]
Some old Bay Trail tablets which shipped with Android as factory OS
have the SST/LPE audio engine described by an ACPI device with a
HID (Hardware-ID) of LPE0F28 instead of 80860F28.
Add support for this. Note this uses a new sst_res_info for just
the LPE0F28 case because it has a different layout for the IO-mem ACPI
resources then the 80860F28.
An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet,
which has been distributed to schools in the Spanish Andalucía region.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241025090221.52198-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0107f28f135231da22a9ad5756bb16bd5cada4d5 ]
The Vexia Edu Atla 10 tablet mostly uses the BYTCR tablet defaults,
but as happens on more models it is using IN1 instead of IN3 for
its internal mic and JD_SRC_JD2_IN4N instead of JD_SRC_JD1_IN4P
for jack-detection.
Add a DMI quirk for this to fix the internal-mic and jack-detection.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241024211615.79518-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d48696b915527b5bcdd207a299aec03fb037eb17 ]
On some x86 Bay Trail tablets which shipped with Android as factory OS,
the DSDT is so broken that the codec needs to be manually instantatiated
by the special x86-android-tablets.ko "fixup" driver for cases like this.
This means that the codec-dev cannot be retrieved through its ACPI fwnode,
add support to the bytcr_rt5640 machine driver for such manually
instantiated rt5640 i2c_clients.
An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet,
which has been distributed to schools in the Spanish Andalucía region.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241024211615.79518-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eb94b7bb10109a14a5431a67e5d8e31cfa06b395 upstream.
copy_safe_from_sockptr()
return copy_from_sockptr()
return copy_from_sockptr_offset()
return copy_from_user()
copy_from_user() does not return an error on fault. Instead, it returns a
number of bytes that were not copied. Have it handled.
Patch has a side effect: it un-breaks garbage input handling of
nfc_llcp_setsockopt() and mISDN's data_sock_setsockopt().
Fixes: 6309863b31dd ("net: add copy_safe_from_sockptr() helper")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241111-sockptr-copy-ret-fix-v1-1-a520083a93fb@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ae04ba36b381bffe2471eff3a93edced843240f upstream.
ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be
possible that two unrelated 16-byte allocations share a cache line. If
one of these allocations is written using DMA and the other is written
using cached write, the value that was written with DMA may be
corrupted.
This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 -
that's the largest possible cache line size.
As different parisc microarchitectures have different cache line size, we
define arch_slab_minalign(), cache_line_size() and
dma_get_cache_alignment() so that the kernel may tune slab cache
parameters dynamically, based on the detected cache line size.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9ff882b54f99f96787fa3df7cd938966843c418 upstream.
When powering on a null_blk device that is not already on, the return
value ret that is initialized to be count is reused to check the return
value of null_add_dev(), leading to nullb_device_power_store() to return
null_add_dev() return value (0 on success) instead of "count".
So make sure to set ret to be equal to count when there are no errors.
Fixes: a2db328b0839 ("null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20240527043445.235267-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 282a4b7181 upstream.
The driver for XillyUSB devices maintains a kref reference count on each
xillyusb_dev structure, which represents a physical device. This reference
count reaches zero when the device has been disconnected and there are no
open file descriptors that are related to the device. When this occurs,
kref_put() calls cleanup_dev(), which clears up the device's data,
including the structure itself.
However, when xillyusb_open() is called, this reference count becomes
tricky: This function needs to obtain the xillyusb_dev structure that
relates to the inode's major and minor (as there can be several such).
xillybus_find_inode() (which is defined in xillybus_class.c) is called
for this purpose. xillybus_find_inode() holds a mutex that is global in
xillybus_class.c to protect the list of devices, and releases this
mutex before returning. As a result, nothing protects the xillyusb_dev's
reference counter from being decremented to zero before xillyusb_open()
increments it on its own behalf. Hence the structure can be freed
due to a rare race condition.
To solve this, a mutex is added. It is locked by xillyusb_open() before
the call to xillybus_find_inode() and is released only after the kref
counter has been incremented on behalf of the newly opened inode. This
protects the kref reference counters of all xillyusb_dev structs from
being decremented by xillyusb_disconnect() during this time segment, as
the call to kref_put() in this function is done with the same lock held.
There is no need to hold the lock on other calls to kref_put(), because
if xillybus_find_inode() finds a struct, xillyusb_disconnect() has not
made the call to remove it, and hence not made its call to kref_put(),
which takes place afterwards. Hence preventing xillyusb_disconnect's
call to kref_put() is enough to ensure that the reference doesn't reach
zero before it's incremented by xillyusb_open().
It would have been more natural to increment the reference count in
xillybus_find_inode() of course, however this function is also called by
Xillybus' driver for PCIe / OF, which registers a completely different
structure. Therefore, xillybus_find_inode() treats these structures as
void pointers, and accordingly can't make any changes.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20221030094209.65916-1-eli.billauer@gmail.com
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 406e8845356d18bdf3d3a23b347faf67706472ec upstream.
In SR-IOV environment, the value of pcie_table->num_of_link_levels will
be 0, and num_of_levels - 1 will cause array index out of bounds
Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ Resolve minor conflicts to fix CVE-2023-52812 ]
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5de195060b2e251a835f622759550e6202167641 ]
The mmap_region() function is somewhat terrifying, with spaghetti-like
control flow and numerous means by which issues can arise and incomplete
state, memory leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
Taking advantage of previous patches in this series we move a number of
checks earlier in the code, simplifying things by moving the core of the
logic into a static internal function __mmap_region().
Doing this allows us to perform a number of checks up front before we do
any real work, and allows us to unwind the writable unmap check
unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE
validation unconditionally also.
We move a number of things here:
1. We preallocate memory for the iterator before we call the file-backed
memory hook, allowing us to exit early and avoid having to perform
complicated and error-prone close/free logic. We carefully free
iterator state on both success and error paths.
2. The enclosing mmap_region() function handles the mapping_map_writable()
logic early. Previously the logic had the mapping_map_writable() at the
point of mapping a newly allocated file-backed VMA, and a matching
mapping_unmap_writable() on success and error paths.
We now do this unconditionally if this is a file-backed, shared writable
mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however
doing so does not invalidate the seal check we just performed, and we in
any case always decrement the counter in the wrapper.
We perform a debug assert to ensure a driver does not attempt to do the
opposite.
3. We also move arch_validate_flags() up into the mmap_region()
function. This is only relevant on arm64 and sparc64, and the check is
only meaningful for SPARC with ADI enabled. We explicitly add a warning
for this arch if a driver invalidates this check, though the code ought
eventually to be fixed to eliminate the need for this.
With all of these measures in place, we no longer need to explicitly close
the VMA on error paths, as we place all checks which might fail prior to a
call to any driver mmap hook.
This eliminates an entire class of errors, makes the code easier to reason
about and more robust.
Link: https://lkml.kernel.org/r/6e0becb36d2f5472053ac5d544c0edfe9b899e25.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5baf8b037debf4ec60108ccfeccb8636d1dbad81 ]
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3dd6ed34ce1f2356a77fb88edafb5ec96784e3cf ]
Patch series "fix error handling in mmap_region() and refactor
(hotfixes)", v4.
mmap_region() is somewhat terrifying, with spaghetti-like control flow and
numerous means by which issues can arise and incomplete state, memory
leaks and other unpleasantness can occur.
A large amount of the complexity arises from trying to handle errors late
in the process of mapping a VMA, which forms the basis of recently
observed issues with resource leaks and observable inconsistent state.
This series goes to great lengths to simplify how mmap_region() works and
to avoid unwinding errors late on in the process of setting up the VMA for
the new mapping, and equally avoids such operations occurring while the
VMA is in an inconsistent state.
The patches in this series comprise the minimal changes required to
resolve existing issues in mmap_region() error handling, in order that
they can be hotfixed and backported. There is additionally a follow up
series which goes further, separated out from the v1 series and sent and
updated separately.
This patch (of 5):
After an attempted mmap() fails, we are no longer in a situation where we
can safely interact with VMA hooks. This is currently not enforced,
meaning that we need complicated handling to ensure we do not incorrectly
call these hooks.
We can avoid the whole issue by treating the VMA as suspect the moment
that the file->f_ops->mmap() function reports an error by replacing
whatever VMA operations were installed with a dummy empty set of VMA
operations.
We do so through a new helper function internal to mm - mmap_file() -
which is both more logically named than the existing call_mmap() function
and correctly isolates handling of the vm_op reassignment to mm.
All the existing invocations of call_mmap() outside of mm are ultimately
nested within the call_mmap() from mm, which we now replace.
It is therefore safe to leave call_mmap() in place as a convenience
function (and to avoid churn). The invokers are:
ovl_file_operations -> mmap -> ovl_mmap() -> backing_file_mmap()
coda_file_operations -> mmap -> coda_file_mmap()
shm_file_operations -> shm_mmap()
shm_file_operations_huge -> shm_mmap()
dma_buf_fops -> dma_buf_mmap_internal -> i915_dmabuf_ops
-> i915_gem_dmabuf_mmap()
None of these callers interact with vm_ops or mappings in a problematic
way on error, quickly exiting out.
Link: https://lkml.kernel.org/r/cover.1730224667.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/d41fd763496fd0048a962f3fd9407dc72dd4fd86.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f65628 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2e0c58b25a0a0c37ec643255558c5af4450c9f5 ]
There is a deadlock issue found in sungem driver, please refer to the
commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid
deadlocks"). The root cause of the issue is that netpoll is in atomic
context and disable_irq() is called by .ndo_poll_controller interface
of sungem driver, however, disable_irq() might sleep. After analyzing
the implementation of fec_poll_controller(), the fec driver should have
the same issue. Due to the fec driver uses NAPI for TX completions, the
.ndo_poll_controller is unnecessary to be implemented in the fec driver,
so fec_poll_controller() can be safely removed.
Fixes: 7f5c6addcd ("net/fec: add poll controller function for fec nic")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20240511062009.652918-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
