A kzalloc()+memcpy() can be optimized in a single kmemdup().
This saves a few cycles because some memory doesn't need to be zeroed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compiling AMD GPU drivers displays two warnings:
drivers/gpu/drm/scheduler/sched_main.c:738: warning: Function parameter or member 'file' not described in 'drm_sched_job_add_syncobj_dependency'
drivers/gpu/drm/scheduler/sched_main.c:738: warning: Excess function
parameter 'file_private' description in
'drm_sched_job_add_syncobj_dependency'
Get rid of them by renaming the variable name on the function description
Signed-off-by: Caio Novais <caionovais@usp.br>
Link: https://lore.kernel.org/r/20230325131532.6356-1-caionovais@usp.br
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are a small set of USB and Thunderbolt driver fixes for reported
problems and a documentation update, for 6.3-rc4.
Included in here are:
- documentation update for uvc gadget driver
- small thunderbolt driver fixes
- cdns3 driver fixes
- dwc3 driver fixes
- dwc2 driver fixes
- chipidea driver fixes
- typec driver fixes
- onboard_usb_hub device id updates
- quirk updates
All of these have been in linux-next with no reported problems"
* tag 'usb-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
usb: dwc2: fix a race, don't power off/on phy for dual-role mode
usb: dwc2: fix a devres leak in hw_enable upon suspend resume
usb: chipidea: core: fix possible concurrent when switch role
usb: chipdea: core: fix return -EINVAL if request role is the same with current role
thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit
thunderbolt: Disable interrupt auto clear for rings
thunderbolt: Use const qualifier for `ring_interrupt_index`
usb: gadget: Use correct endianness of the wLength field for WebUSB
uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2
usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver
usb: cdns3: Fix issue with using incorrect PCI device function
usb: cdnsp: Fixes issue with redundant Status Stage
MAINTAINERS: make me a reviewer of USB/IP
thunderbolt: Use scale field when allocating USB3 bandwidth
thunderbolt: Limit USB3 bandwidth of certain Intel USB4 host routers
thunderbolt: Call tb_check_quirks() after initializing adapters
thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access
thunderbolt: Fix memory leak in margining
usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"
docs: usb: Add documentation for the UVC Gadget
...
Pull scheduler fix from Borislav Petkov:
- Fix a corner case where vruntime of a task is not being sanitized
* tag 'sched_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Sanitize vruntime of entity being migrated
Pull perf fix from Borislav Petkov:
- Properly clear perf event status tracking in the AMD perf event
overflow handler
* tag 'perf_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/core: Always clear status for idx
Pull core fixes from Borislav Petkov:
- Do the delayed RCU wakeup for kthreads in the proper order so that
former doesn't get ignored
- A noinstr warning fix
* tag 'core_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-up
entry: Fix noinstr warning in __enter_from_user_mode()
Pull x86 fixes from Borislav Petkov:
- Add a AMX ptrace self test
- Prevent a false-positive warning when retrieving the (invalid)
address of dynamic FPU features in their init state which are not
saved in init_fpstate at all
- Randomize per-CPU entry areas only when KASLR is enabled
* tag 'x86_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86/amx: Add a ptrace test
x86/fpu/xstate: Prevent false-positive warning in __copy_xstate_uabi_buf()
x86/mm: Do not shuffle CPU entry areas without KASLR
Pull cifs client fixes from Steve French:
"Twelve cifs/smb3 client fixes (most also for stable)
- forced umount fix
- fix for two perf regressions
- reconnect fixes
- small debugging improvements
- multichannel fixes"
* tag 'smb3-client-fixes-6.3-rc3' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix unusable share after force unmount failure
cifs: fix dentry lookups in directory handle cache
smb3: lower default deferred close timeout to address perf regression
cifs: fix missing unload_nls() in smb2_reconnect()
cifs: avoid race conditions with parallel reconnects
cifs: append path to open_enter trace event
cifs: print session id while listing open files
cifs: dump pending mids for all channels in DebugData
cifs: empty interface list when server doesn't support query interfaces
cifs: do not poll server interfaces too regularly
cifs: lock chan_lock outside match_session
cifs: check only tcon status on tcon related functions
Now that everything that controls which LRU an obj lives in *except* the
backing pages is protected by the LRU lock, add a special path to unpin
in the job_run() path, where we are assured that we already have backing
pages and will not be racing against eviction (because the GEM object's
dma_resv contains the fence that will be signaled when the submit/job
completes).
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527845/
Link: https://lore.kernel.org/r/20230320144356.803762-10-robdclark@gmail.com
Since the LRU lock is already acquired when moving an obj between LRUs,
we can use it to protect pin_count and madv, without any significant
change in locking (ie. it just expands the scope of the lock by a hand-
ful of instructions). This prepares the way to decrement the pin_count
in the job_run() path without needing to hold the obj lock, to avoid a
potential deadlock (or rather stall) caused by the fence-signaling path
(job_run()) blocking on shrinker/reclaim. (Only a stall because the
wait for fence signaling wait_for_idle() is not infinite.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527843/
Link: https://lore.kernel.org/r/20230320144356.803762-9-robdclark@gmail.com
The flags are only accessed (1) when submit is constructed, before
enqueuing to gpu sched (ie. when still visible to only the task calling
the submit ioctl), (2) here, where we own a reference to the submit and
are serialized on the gpu sched thread, and (3) after the submit is
retired and last reference is dropped, which is serialized on the
submit's reference count. Hence locking is unneeded here.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/527830/
Link: https://lore.kernel.org/r/20230320144356.803762-3-robdclark@gmail.com
The DORCR register controls the routing of clocks and data between DU
channels within a group. For groups that contain a single channel,
there's no routing option to control, and some fields of the register
are then reserved. On Gen2 those reserved fields are documented as
required to be set to 0, while on Gen3 and newer the PG1T, DK1S and PG1D
reserved fields must be set to 1.
The DU driver initializes the DORCR register in rcar_du_group_setup(),
where it ignores the PG1T, DK1S and PG1D, and then configures those
fields to the correct value in rcar_du_group_set_routing(). This hasn't
been shown to cause any issue, but prevents certifying that the driver
complies with the documentation in safety-critical use cases.
As there is no reasonable change that the documentation will be updated
to clarify that those reserved fields can be written to 0 temporarily
before starting the hardware, make sure that the registers are always
set to valid values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The DORCR fields were documented in the R-Car H1 datasheet with 1-based
named, and then got renamed to 0-based in Gen2. The 0-based names are
used for Gen3 and Gen4, making H1 an outlier. Rename the field macros to
make them 0-based, in order to increase readability of the code when
comparing it with the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
When the input to a DU channel comes from a VSP, the DU doesn't perform
any blending operation. Select XRGB8888 instead of ARGB8888 to ensure
that the corresponding registers don't get written with invalid values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The ESCR and OTAR registers are not present in all DU channels on Gen3
SoCs. ESCR only exists in channels that can be routed to an LVDS or
DPAD, and OTAR in channels that can be routed to a DPAD. Skip writing
those registers for other channels. This replaces the DU gen check, as
Gen4 doesn't have LVDS or DPAD outputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
On R-Car D3 and E3, the LVDS encoder provides the dot (pixel) clock to
the DU, regardless of whether the LVDS output is used or not. When using
the DPAD (RGB) output, the DU driver thus enables and disables the LVDS
PLL manually, while when using the LVDS output, it lets the LVDS bridge
driver handle the PLL configuration internally as part of the atomic
enable and disable operations.
This causes an issue when using the LVDS output. As bridges are disabled
before CRTCs, the current implementation violates the enable/disable
sequences documented in the hardware datasheet, which requires the dot
clock to be enabled before the CRTC is started and disabled after it
gets stopped.
Fix the problem by enabling/disabling the LVDS PLL manually from the DU
regardless of which output is used, and skipping the PLL handling in the
LVDS bridge atomic enable and disable operations.
This is however not enough. Disabling the LVDS encoder while leaving the
PLL on still results in a vertical blanking wait timeout when disabling
the DU. Investigation showed that the culprit is the LVEN bit. For an
unclear reason, clearing the bit when disabling the LVDS encoder blocks
vertical blanking interrupts. We thus have to delay disabling the whole
LVDS encoder, not just disabling the PLL, until the DU is disabled.
We could split the LVDS disable sequence by clearing the LVRES bit in
the LVDS bridge atomic disable handler, and delaying the rest of the
operations, in order to disable the LVDS output at bridge atomic disable
time, before stopping the CRTC. This would make the code more complex,
without a clear benefit, so keep the implementation simple(r).
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
To prepare for a rework of the LVDS disable code, which will need to be
called from rcar_lvds_pclk_disable(), move the LVDS enable code,
currently stored in the __rcar_lvds_atomic_enable() function, to a
separate code section separate from bridge operations. It will be then
extended with the LVDS disable code.
As part of this rework the __rcar_lvds_atomic_enable() function is
renamed to rcar_lvds_enable() to more clearly indicate its purpose.
No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
When disabling the companion bridge in rcar_lvds_atomic_disable(),
there's no need to go through the bridge's operations to call
.atomic_disable(). Call rcar_lvds_atomic_disable() on the companion
directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Pull nfsd fix from Chuck Lever:
- Fix a crash when using NFS with krb5p
* tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a crash in gss_krb5_checksum()
Pull yet more xfs bug fixes from Darrick Wong:
"The first bugfix addresses a longstanding problem where we use the
wrong file mapping cursors when trying to compute the speculative
preallocation quantity. This has been causing sporadic crashes when
alwayscow mode is engaged.
The other two fixes correct minor problems in more recent changes.
- Fix the new allocator tracepoints because git am mismerged the
changes such that the trace_XXX got rebased to be in function YYY
instead of XXX
- Ensure that the perag AGFL_RESET state is consistent with whatever
we've just read off the disk
- Fix a bug where we used the wrong iext cursor during a write begin"
* tag 'xfs-6.3-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix mismerged tracepoints
xfs: clear incore AGFL_RESET state if it's not needed
xfs: pass the correct cursor to xfs_iomap_prealloc_size
Pull xfs percpu counter fixes from Darrick Wong:
"We discovered a filesystem summary counter corruption problem that was
traced to cpu hot-remove racing with the call to percpu_counter_sum
that sets the free block count in the superblock when writing it to
disk. The root cause is that percpu_counter_sum doesn't cull from
dying cpus and hence misses those counter values if the cpu shutdown
hooks have not yet run to merge the values.
I'm hoping this is a fairly painless fix to the problem, since the
dying cpu mask should generally be empty. It's been in for-next for a
week without any complaints from the bots.
- Fix a race in the percpu counters summation code where the
summation failed to add in the values for any CPUs that were dying
but not yet dead. This fixes some minor discrepancies and incorrect
assertions when running generic/650"
* tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
pcpcntr: remove percpu_counter_sum_all()
fork: remove use of percpu_counter_sum_all
pcpcntrs: fix dying cpu summation race
cpumask: introduce for_each_cpu_or
Pull xfs fixes from Darrick Wong:
"This batch started with some debugging enhancements to the new
allocator refactoring that we put in 6.3-rc1 to assist developers in
rebasing their dev branches.
As for more serious code changes -- there's a bug fix to make the
lockless allocator scan the whole filesystem before resorting to the
locking allocator. We're also adding a selftest for the venerable
directory/xattr hash function to make sure that it produces consistent
results so that we can address any fallout as soon as possible.
- Add a few debugging assertions so that people (me) trying to port
code to the new allocator functions don't mess up the caller
requirements
- Relax some overly cautious lock ordering enforcement in the new
allocator code, which means that file allocations will locklessly
scan for the best space they can get before backing off to the
traditional lock-and-really-get-it behavior
- Add tracepoints to make it easier to trace the xfs allocator
behavior
- Actually test the dir/xattr hash algorithm to make sure it produces
consistent results across all the platforms XFS supports"
* tag 'xfs-6.3-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: test dir/attr hash when loading module
xfs: add tracepoints for each of the externally visible allocators
xfs: walk all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags
xfs: try to idiot-proof the allocators
Add a way to hint to the fence signaler of an upcoming deadline, such as
vblank, which the fence waiter would prefer not to miss. This is to aid
the fence signaler in making power management decisions, like boosting
frequency as the deadline approaches and awareness of missing deadlines
so that can be factored in to the frequency scaling.
v2: Drop dma_fence::deadline and related logic to filter duplicate
deadlines, to avoid increasing dma_fence size. The fence-context
implementation will need similar logic to track deadlines of all
the fences on the same timeline. [ckoenig]
v3: Clarify locking wrt. set_deadline callback
v4: Clarify in docs comment that this is a hint
v5: Drop DMA_FENCE_FLAG_HAS_DEADLINE_BIT.
v6: More docs
v7: Fix typo, clarify past deadlines
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Pull hwmon fixes from Guenter Roeck:
- it87: Fix voltage scaling for chips with 10.9mV ADCs
- xgene: Fix ioremap and memremap leak
- peci/cputemp: Fix miscalculated DTS temperature for SKX
- hwmon core: fix potential sensor registration failure with thermal
subsystem if of_node is missing
* tag 'hwmon-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCs
hwmon: (xgene) Fix ioremap and memremap leak
hwmon: fix potential sensor registration fail if of_node is missing
hwmon: (peci/cputemp) Fix miscalculated DTS for SKX
Pull misc fixes from Andrew Morton:
"21 hotfixes, 8 of which are cc:stable. 11 are for MM, the remainder
are for other subsystems"
* tag 'mm-hotfixes-stable-2023-03-24-17-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm: mmap: remove newline at the end of the trace
mailmap: add entries for Richard Leitner
kcsan: avoid passing -g for test
kfence: avoid passing -g for test
mm: kfence: fix using kfence_metadata without initialization in show_object()
lib: dhry: fix unstable smp_processor_id(_) usage
mailmap: add entry for Enric Balletbo i Serra
mailmap: map Sai Prakash Ranjan's old address to his current one
mailmap: map Rajendra Nayak's old address to his current one
Revert "kasan: drop skip_kasan_poison variable in free_pages_prepare"
mailmap: add entry for Tobias Klauser
kasan, powerpc: don't rename memintrinsics if compiler adds prefixes
mm/ksm: fix race with VMA iteration and mm_struct teardown
kselftest: vm: fix unused variable warning
mm: fix error handling for map_deny_write_exec
mm: deduplicate error handling for map_deny_write_exec
checksyscalls: ignore fstat to silence build warning on LoongArch
nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()
test_maple_tree: add more testing for mas_empty_area()
maple_tree: fix mas_skip_node() end slot detection
...
Pull ksmbd server fixes from Steve French:
- return less confusing messages on unsupported dialects
(STATUS_NOT_SUPPORTED instead of I/O error)
- fix for overly frequent inactive session termination
- fix refcount leak
- fix bounds check problems found by static checkers
- fix to advertise named stream support correctly
- Fix AES256 signing bug when connected to from MacOS
* tag '6.3-rc3-ksmbd-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: return unsupported error on smb1 mount
ksmbd: return STATUS_NOT_SUPPORTED on unsupported smb2.0 dialect
ksmbd: don't terminate inactive sessions after a few seconds
ksmbd: fix possible refcount leak in smb2_open()
ksmbd: add low bound validation to FSCTL_QUERY_ALLOCATED_RANGES
ksmbd: add low bound validation to FSCTL_SET_ZERO_DATA
ksmbd: set FILE_NAMED_STREAMS attribute in FS_ATTRIBUTE_INFORMATION
ksmbd: fix wrong signingkey creation when encryption is AES256
