[ Upstream commit a2cdf39536 ]
nv50_disp_atomic_commit() calls calls pm_runtime_get_sync and in turn
increments the reference count. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfad51c763 ]
nouveau_fbcon_open() calls calls pm_runtime_get_sync() that
increments the reference count. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99c787cfd2 ]
During umount, f2fs_put_super() unregisters procfs entries after
f2fs_destroy_segment_manager(), it may cause use-after-free
issue when umount races with procfs accessing, fix it by relocating
f2fs_unregister_sysfs().
[Chao Yu: change commit title/message a bit]
Signed-off-by: Li Guifu <bluce.liguifu@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68f775ddd2 ]
Add HID_QUIRK_NOGET for Logitech GROUP device.
Logitech GROUP is a compound with camera and audio.
When the HID interface in an audio device is requested to get
specific report id, all following control transfers are stalled
and never be restored back.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203419
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5656bb3857 ]
The timer fixed interval period pulse generator register
is used to generate periodic pulses. The down count
register loads the value programmed in the fixed period
interval (FIPER). At every tick of the timer accumulator
overflow, the counter decrements by the value of
TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down
counter value reaches zero. It reloads the down counter
in the cycle following a pulse.
To use the TMR_FIPER register to generate desired periodic
pulses. The value should programmed is,
desired_period - tclk_period
Current tmr-fiper2 value is to generate 100us periodic pulses.
(But the value should have been 99995, not 99990. The tclk_period is 5.)
This patch is to generate 1 second periodic pulses with value
999999995 programmed which is more desired by user.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a94644b44 ]
kobject_init_and_add() takes a reference even when it fails. If it returns
an error, kobject_put() must be called to clean up the memory associated
with the object.
When kobject_init_and_add() fails, call kobject_put() instead of kfree().
b8eb718348 ("net-sysfs: Fix reference count leak in
rx|netdev_queue_add_kobject") fixed a similar problem.
Link: https://lore.kernel.org/r/20200528021322.1984-1-wu000273@umn.edu
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3337bf41e0 ]
An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
formed when count_pmc() is used to reset PMCs on a few selftests. This
extra pmc_count can occasionally invalidate results, such as the ones from
cycles_test shown hereafter. The ebb_check_count() failed with an above
the upper limit error due to the extra value on ebb_state.stats.pmc_count.
Furthermore, this extra count is also indicated by extra PMC1 trace_log on
the output of the cycle test (as well as on pmc56_overflow_test):
==========
...
[21]: counter = 8
[22]: register SPRN_MMCR0 = 0x0000000080000080
[23]: register SPRN_PMC1 = 0x0000000080000004
[24]: counter = 9
[25]: register SPRN_MMCR0 = 0x0000000080000080
[26]: register SPRN_PMC1 = 0x0000000080000004
[27]: counter = 10
[28]: register SPRN_MMCR0 = 0x0000000080000080
[29]: register SPRN_PMC1 = 0x0000000080000004
>> [30]: register SPRN_PMC1 = 0x000000004000051e
PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e)
[FAIL] Test FAILED on line 52
failure: cycles
==========
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96355d5a1f ]
In tracking down a problem in this patchset, I discovered we are
reclaiming dirty stale inodes. This wasn't discovered until inodes
were always attached to the cluster buffer and then the rcu callback
that freed inodes was assert failing because the inode still had an
active pointer to the cluster buffer after it had been reclaimed.
Debugging the issue indicated that this was a pre-existing issue
resulting from the way the inodes are handled in xfs_inactive_ifree.
When we free a cluster buffer from xfs_ifree_cluster, all the inodes
in cache are marked XFS_ISTALE. Those that are clean have nothing
else done to them and so eventually get cleaned up by background
reclaim. i.e. it is assumed we'll never dirty/relog an inode marked
XFS_ISTALE.
On journal commit dirty stale inodes as are handled by both
buffer and inode log items to run though xfs_istale_done() and
removed from the AIL (buffer log item commit) or the log item will
simply unpin it because the buffer log item will clean it. What happens
to any specific inode is entirely dependent on which log item wins
the commit race, but the result is the same - stale inodes are
clean, not attached to the cluster buffer, and not in the AIL. Hence
inode reclaim can just free these inodes without further care.
However, if the stale inode is relogged, it gets dirtied again and
relogged into the CIL. Most of the time this isn't an issue, because
relogging simply changes the inode's location in the current
checkpoint. Problems arise, however, when the CIL checkpoints
between two transactions in the xfs_inactive_ifree() deferops
processing. This results in the XFS_ISTALE inode being redirtied
and inserted into the CIL without any of the other stale cluster
buffer infrastructure being in place.
Hence on journal commit, it simply gets unpinned, so it remains
dirty in memory. Everything in inode writeback avoids XFS_ISTALE
inodes so it can't be written back, and it is not tracked in the AIL
so there's not even a trigger to attempt to clean the inode. Hence
the inode just sits dirty in memory until inode reclaim comes along,
sees that it is XFS_ISTALE, and goes to reclaim it. This reclaiming
of a dirty inode caused use after free, list corruptions and other
nasty issues later in this patchset.
Hence this patch addresses a violation of the "never log XFS_ISTALE
inodes" caused by the deferops processing rolling a transaction
and relogging a stale inode in xfs_inactive_free. It also adds a
bunch of asserts to catch this problem in debug kernels so that
we don't reintroduce this problem in future.
Reproducer for this issue was generic/558 on a v4 filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03dbfe0668 ]
When vports are deleted, it is observed that there is memory/kthread
leakage as the vport isn't fully being released.
There is a shost reference taken in scsi_add_host_dma that is not released
during scsi_remove_host. It was noticed that other drivers resolve this by
doing a scsi_host_put after calling scsi_remove_host.
The vport_delete routine is taking two references one that corresponds to
an access to the scsi_host in the vport_delete routine and another that is
released after the adapter mailbox command completes that destroys the VPI
that corresponds to the vport.
Remove one of the references taken such that the second reference that is
put will complete the missing scsi_add_host_dma reference and the shost
will be terminated.
Link: https://lore.kernel.org/r/20200630215001.70793-8-jsmart2021@gmail.com
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f79f94765f ]
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e008fa6fb4 ]
in amdgpu_display_crtc_set_config, the call to pm_runtime_get_sync
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5509ac65f2 ]
in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ba8923cbb ]
in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f2e8acdb4 ]
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20eca0123a ]
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3e3d2be68 ]
Unlike the other instances which represent a complete loss of
consistency within the rcache mechanism itself, or a fundamental
and obvious misconfiguration by an IOMMU driver, the BUG_ON() in
iova_magazine_free_pfns() can be provoked at more or less any time
in a "spooky action-at-a-distance" manner by any old device driver
passing nonsense to dma_unmap_*() which then propagates through to
queue_iova().
Not only is this well outside the IOVA layer's control, it's also
nowhere near fatal enough to justify panicking anyway - all that
really achieves is to make debugging the offending driver more
difficult. Let's simply WARN and otherwise ignore bogus PFNs.
Reported-by: Prakash Gupta <guptap@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Prakash Gupta <guptap@codeaurora.org>
Link: https://lore.kernel.org/r/acbd2d092b42738a03a21b417ce64e27f8c91c86.1591103298.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b431ef837e ]
We make an assumption that a debugfs directory exists, but since
this can fail ensure it exists before allowing blktrace setup to
complete. Otherwise we end up stuffing blktrace files on the debugfs
root directory. In the worst case scenario this *in theory* can create
an eventual panic *iff* in the future a similarly named file is created
prior on the debugfs root directory. This theoretical crash can happen
due to a recursive removal followed by a specific dentry removal.
This doesn't fix any known crash, however I have seen the files
go into the main debugfs root directory in cases where the debugfs
directory was not created due to other internal bugs with blktrace
now fixed.
blktrace is also completely useless without this directory, so
this ensures to userspace we only setup blktrace if the kernel
can stuff files where they are supposed to go into.
debugfs directory creations typically aren't checked for, and we have
maintainers doing sweep removals of these checks, but since we need this
check to ensure proper userspace blktrace functionality we make sure
to annotate the justification for the check.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6499a0db9b ]
The value av7110->debi_virt is stored in DMA memory, and it is assigned
to data, and thus data[0] can be modified at any time by malicious
hardware. In this case, "if (data[0] < 2)" can be passed, but then
data[0] can be changed into a large number, which may cause buffer
overflow when the code "av7110->ci_slot[data[0]]" is used.
To fix this possible bug, data[0] is assigned to a local variable, which
replaces the use of data[0].
Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0f5c7076e ]
Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose
NETIF_F_LLTX feature because of the incorrect handling of
features in ipvlan_fix_features().
--before--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Actual changes:
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: off [fixed]
lpaa10:~#
--after--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Could not change any device features
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~#
Fixes: 2ad7bf3638 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ccd143e515 ]
Most statistics in ena driver are incremented, meaning that a stat's
value is a sum of all increases done to it since driver/queue
initialization.
This patch makes all statistics this way, effectively making missed_tx
statistic incremental.
Also added a comment regarding rx_drops and tx_drops to make it
clearer how these counters are calculated.
Fixes: 11095fdb71 ("net: ena: add statistics for missed tx packets")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 47733f9daf ]
__tipc_nl_compat_dumpit() has two callers, and it expects them to
pass a valid nlmsghdr via arg->data. This header is artificial and
crafted just for __tipc_nl_compat_dumpit().
tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well
as some nested attribute, TIPC_NLA_SOCK. But the other caller
tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized
on this call path.
Fix this by just adding a similar nlmsghdr without any payload in
tipc_nl_compat_dumpit().
This bug exists since day 1, but the recent commit 6ea67769ff
("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it
easier to appear.
Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com
Fixes: d0796d1ef6 ("tipc: convert legacy nl bearer dump to nl compat")
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Richard Alpe <richard.alpe@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce51f63e63 ]
__smc_diag_dump() is potentially copying uninitialized kernel stack memory
into socket buffers, since the compiler may leave a 4-byte hole near the
beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo`
with memset().
Fixes: 4b1b7d3b30 ("net/smc: add SMC-D diag support")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8dfddfb796 ]
Passing large uint32 sockaddr_qrtr.port numbers for port allocation
triggers a warning within idr_alloc() since the port number is cast
to int, and thus interpreted as a negative number. This leads to
the rejection of such valid port numbers in qrtr_port_assign() as
idr_alloc() fails.
To avoid the problem, switch to idr_alloc_u32() instead.
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Reported-by: syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com
Signed-off-by: Necip Fazil Yildiran <necip@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55eff0eb74 ]
We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So
we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or
we may access the wrong data.
Fixes: 0d5501c1c8 ("net: Always untag vlan-tagged traffic on input.")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 272502fcb7 ]
When receiving an IPv4 packet inside an IPv6 GRE packet, and the
IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would
get corrupted. This is due to the common ip6_tnl_rcv() function assuming
that the inner header is always IPv6. This patch checks the tunnel
protocol for IPv4 inner packets, but still defaults to IPv6.
Fixes: 308edfdf15 ("gre6: Cleanup GREv6 receive path, call common GRE functions")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0828137e8f upstream.
__init_FSCR() was added originally in commit 2468dcf641 ("powerpc:
Add support for context switching the TAR register") (Feb 2013), and
only set FSCR_TAR.
At that point FSCR (Facility Status and Control Register) was not
context switched, so the setting was permanent after boot.
Later we added initialisation of FSCR_DSCR to __init_FSCR(), in commit
54c9b2253d ("powerpc: Set DSCR bit in FSCR setup") (Mar 2013), again
that was permanent after boot.
Then commit 2517617e0d ("powerpc: Fix context switch DSCR on
POWER8") (Aug 2013) added a limited context switch of FSCR, just the
FSCR_DSCR bit was context switched based on thread.dscr_inherit. That
commit said "This clears the H/FSCR DSCR bit initially", but it
didn't, it left the initialisation of FSCR_DSCR in __init_FSCR().
However the initial context switch from init_task to pid 1 would clear
FSCR_DSCR because thread.dscr_inherit was 0.
That commit also introduced the requirement that FSCR_DSCR be clear
for user processes, so that we can take the facility unavailable
interrupt in order to manage dscr_inherit.
Then in commit 152d523e63 ("powerpc: Create context switch helpers
save_sprs() and restore_sprs()") (Dec 2015) FSCR was added to
thread_struct. However it still wasn't fully context switched, we just
took the existing value and set FSCR_DSCR if the new thread had
dscr_inherit set. FSCR was still initialised at boot to FSCR_DSCR |
FSCR_TAR, but that value was not propagated into the thread_struct, so
the initial context switch set FSCR_DSCR back to 0.
Finally commit b57bd2de8c ("powerpc: Improve FSCR init and context
switching") (Jun 2016) added a full context switch of the FSCR, and
added an initialisation of init_task.thread.fscr to FSCR_TAR |
FSCR_EBB, but omitted FSCR_DSCR.
The end result is that swapper runs with FSCR_DSCR set because of the
initialisation in __init_FSCR(), but no other processes do, they use
the value from init_task.thread.fscr.
Having FSCR_DSCR set for swapper allows it to access SPR 3 from
userspace, but swapper never runs userspace, so it has no useful
effect. It's also confusing to have the value initialised in two
places to two different values.
So remove FSCR_DSCR from __init_FSCR(), this at least gets us to the
point where there's a single value of FSCR, even if it's still set in
two places.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-1-mpe@ellerman.id.au
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5331379bc upstream.
When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():
| BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394
| in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper
| INFO: lockdep is turned off.
| CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1
| Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
| Call trace:
| dump_backtrace+0x0/0x284
| show_stack+0x1c/0x28
| dump_stack+0xf0/0x1a4
| ___might_sleep+0x2bc/0x2cc
| unmap_stage2_range+0x160/0x1ac
| kvm_unmap_hva_range+0x1a0/0x1c8
| kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8
| __mmu_notifier_invalidate_range_start+0x218/0x31c
| mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0
| __oom_reap_task_mm+0x128/0x268
| oom_reap_task+0xac/0x298
| oom_reaper+0x178/0x17c
| kthread+0x1e4/0x1fc
| ret_from_fork+0x10/0x30
Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we
only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier
flags.
Cc: <stable@vger.kernel.org>
Fixes: 8b3405e345 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-3-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[will: Backport to 4.19; use 'blockable' instead of non-existent MMU_NOTIFIER_RANGE_BLOCKABLE flag]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdfe7cbd58 upstream.
The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.
Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.
Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[will: Backport to 4.19; use 'blockable' instead of non-existent range flags]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdcf1dc253 upstream.
We leave a dangling pointer in each clk_core::parents array that has an
unregistered clk as a potential parent when that clk_core pointer is
freed by clk{_hw}_unregister(). It is impossible for the true parent of
a clk to be set with clk_set_parent() once the dangling pointer is left
in the cache because we compare parent pointers in
clk_fetch_parent_index() instead of checking for a matching clk name or
clk_hw pointer.
Before commit ede7785847 ("clk: Remove global clk traversal on fetch
parent index"), we would check clk_hw pointers, which has a higher
chance of being the same between registration and unregistration, but it
can still be allocated and freed by the clk provider. In fact, this has
been a long standing problem since commit da0f0b2c3a ("clk: Correct
lookup logic in clk_fetch_parent_index()") where we stopped trying to
compare clk names and skipped over entries in the cache that weren't
NULL.
There are good (performance) reasons to not do the global tree lookup in
cases where the cache holds dangling pointers to parents that have been
unregistered. Let's take the performance hit on the uncommon
registration path instead. Loop through all the clk_core::parents arrays
when a clk is unregistered and set the entry to NULL when the parent
cache entry and clk being unregistered are the same pointer. This will
fix this problem and avoid the overhead for the "normal" case.
Based on a patch by Bjorn Andersson.
Fixes: da0f0b2c3a ("clk: Correct lookup logic in clk_fetch_parent_index()")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190828181959.204401-1-sboyd@kernel.org
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For support of long running hypercalls xen_maybe_preempt_hcall() is
calling cond_resched() in case a hypercall marked as preemptible has
been interrupted.
Normally this is no problem, as only hypercalls done via some ioctl()s
are marked to be preemptible. In rare cases when during such a
preemptible hypercall an interrupt occurs and any softirq action is
started from irq_exit(), a further hypercall issued by the softirq
handler will be regarded to be preemptible, too. This might lead to
rescheduling in spite of the softirq handler potentially having set
preempt_disable(), leading to splats like:
BUG: sleeping function called from invalid context at drivers/xen/preempt.c:37
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 20775, name: xl
INFO: lockdep is turned off.
CPU: 1 PID: 20775 Comm: xl Tainted: G D W 5.4.46-1_prgmr_debug.el7.x86_64 #1
Call Trace:
<IRQ>
dump_stack+0x8f/0xd0
___might_sleep.cold.76+0xb2/0x103
xen_maybe_preempt_hcall+0x48/0x70
xen_do_hypervisor_callback+0x37/0x40
RIP: e030:xen_hypercall_xen_version+0xa/0x20
Code: ...
RSP: e02b:ffffc900400dcc30 EFLAGS: 00000246
RAX: 000000000004000d RBX: 0000000000000200 RCX: ffffffff8100122a
RDX: ffff88812e788000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffffff83ee3ad0 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffff8881824aa0b0
R13: 0000000865496000 R14: 0000000865496000 R15: ffff88815d040000
? xen_hypercall_xen_version+0xa/0x20
? xen_force_evtchn_callback+0x9/0x10
? check_events+0x12/0x20
? xen_restore_fl_direct+0x1f/0x20
? _raw_spin_unlock_irqrestore+0x53/0x60
? debug_dma_sync_single_for_cpu+0x91/0xc0
? _raw_spin_unlock_irqrestore+0x53/0x60
? xen_swiotlb_sync_single_for_cpu+0x3d/0x140
? mlx4_en_process_rx_cq+0x6b6/0x1110 [mlx4_en]
? mlx4_en_poll_rx_cq+0x64/0x100 [mlx4_en]
? net_rx_action+0x151/0x4a0
? __do_softirq+0xed/0x55b
? irq_exit+0xea/0x100
? xen_evtchn_do_upcall+0x2c/0x40
? xen_do_hypervisor_callback+0x29/0x40
</IRQ>
? xen_hypercall_domctl+0xa/0x20
? xen_hypercall_domctl+0x8/0x20
? privcmd_ioctl+0x221/0x990 [xen_privcmd]
? do_vfs_ioctl+0xa5/0x6f0
? ksys_ioctl+0x60/0x90
? trace_hardirqs_off_thunk+0x1a/0x20
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x62/0x250
? entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix that by testing preempt_count() before calling cond_resched().
In kernel 5.8 this can't happen any more due to the entry code rework
(more than 100 patches, so not a candidate for backporting).
The issue was introduced in kernel 4.3, so this patch should go into
all stable kernels in [4.3 ... 5.7].
Reported-by: Sarah Newman <srn@prgmr.com>
Fixes: 0fa2f5cb2b ("sched/preempt, xen: Use need_resched() instead of should_resched()")
Cc: Sarah Newman <srn@prgmr.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Chris Brannon <cmb@prgmr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75802ca663 upstream.
This is found by code observation only.
Firstly, the worst case scenario should assume the whole range was covered
by pmd sharing. The old algorithm might not work as expected for ranges
like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the
expected range should be (0, 2g).
Since at it, remove the loop since it should not be required. With that,
the new code should be faster too when the invalidating range is huge.
Mike said:
: With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only
: adjust to (0, 1g+2m) which is incorrect.
:
: We should cc stable. The original reason for adjusting the range was to
: prevent data corruption (getting wrong page). Since the range is not
: always adjusted correctly, the potential for corruption still exists.
:
: However, I am fairly confident that adjust_range_if_pmd_sharing_possible
: is only gong to be called in two cases:
:
: 1) for a single page
: 2) for range == entire vma
:
: In those cases, the current code should produce the correct results.
:
: To be safe, let's just cc stable.
Fixes: 017b1660df ("mm: migration: fix migration of huge PMD shared pages")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9ed4a6560 upstream.
When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.
However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90a9b102ed upstream.
As per PAPR we have to look for both EPOW sensor value and event
modifier to identify the type of event and take appropriate action.
In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes":
SYSTEM_SHUTDOWN 3
The system must be shut down. An EPOW-aware OS logs the EPOW error
log information, then schedules the system to be shut down to begin
after an OS defined delay internal (default is 10 minutes.)
Then in section 10.3.2.2.8 there is table 146 "Platform Event Log
Format, Version 6, EPOW Section", which includes the "EPOW Event
Modifier":
For EPOW sensor value = 3
0x01 = Normal system shutdown with no additional delay
0x02 = Loss of utility power, system is running on UPS/Battery
0x03 = Loss of system critical functions, system should be shutdown
0x04 = Ambient temperature too high
All other values = reserved
We have a user space tool (rtas_errd) on LPAR to monitor for
EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown
after predefined time. It also starts monitoring for any new EPOW
events. If it receives "Power restored" event before predefined time
it will cancel the shutdown. Otherwise after predefined time it will
shutdown the system.
Commit 79872e3546 ("powerpc/pseries: All events of
EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of
the "on UPS/Battery" case, to immediately shutdown the system. This
breaks existing setups that rely on the userspace tool to delay
shutdown and let the system run on the UPS.
Fixes: 79872e3546 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Massage change log and add PAPR references]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 774d977abf ]
clang static analysis reports this problem
b53_common.c:1583:13: warning: The left expression of the compound
assignment is an uninitialized value. The computed value will
also be garbage
ent.port &= ~BIT(port);
~~~~~~~~ ^
ent is set by a successful call to b53_arl_read(). Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.
So add -ETIMEDOUT to the switch statement. Because
b53_arl_op_wait() already prints out a message, do not add another
one.
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
