A common way of multiplexing buttons on a single input in cheap devices is
to use a resistor ladder on an ADC. This driver supports that configuration
by polling an ADC channel provided by IIO.
Change-Id: I110d95d7787a3ad42b5d4040d73b01efe2ca76e4
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit 680772647d)
* linux-linaro-lsk-v4.4-android: (199 commits)
Linux 4.4.41
net: mvpp2: fix dma unmapping of TX buffers for fragments
sg_write()/bsg_write() is not fit to be called under KERNEL_DS
kconfig/nconf: Fix hang when editing symbol with a long prompt
target/user: Fix use-after-free of tcmu_cmds if they are expired
powerpc: Convert cmp to cmpd in idle enter sequence
powerpc/ps3: Fix system hang with GCC 5 builds
nfs_write_end(): fix handling of short copies
libceph: verify authorize reply on connect
PCI: Check for PME in targeted sleep state
Input: drv260x - fix input device's parent assignment
media: solo6x10: fix lockup by avoiding delayed register write
IB/cma: Fix a race condition in iboe_addr_get_sgid()
IB/multicast: Check ib_find_pkey() return value
IPoIB: Avoid reading an uninitialized member variable
IB/mad: Fix an array index check
fgraph: Handle a case where a tracer ignores set_graph_notrace
platform/x86: asus-nb-wmi.c: Add X45U quirk
ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
...
Change-Id: I8c8467700d5563d9a1121c982737ff0ab6d9cdc9
commit 5a8a6b89c1 upstream.
We were assigning I2C bus controller instead of client as parent device.
Besides being logically wrong, it messed up with devm handling of input
device. As a result we were leaving input device and event node behind
after rmmod-ing the driver, which lead to a kernel oops if one were to
access the event node later.
Let's remove the assignment and rely on devm_input_allocate_device() to
set it up properly for us.
Signed-off-by: Jingkui Wang <jkwang@google.com>
Fixes: 7132fe4f56 ("Input: drv260x - add TI drv260x haptics driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure drivers work if rk_keys do not selected.
Change-Id: I2882e6c69f0ddbff54089f824be33964ded3cb2e
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
gslxxxx wrong irq number with the same vopb, may cause vopb abnormal.
ts->irq is gpio number, gslxxxx irq number is ts->client->irq
ts->client->irq = gpio_to_irq(ts->irq)
Change-Id: Ic1f6a46437a2a185f3218d3f0406deeddd9d670a
Signed-off-by: Bin Yang <yangbin@rock-chips.com>
* linux-linaro-lsk-v4.4-android: (61 commits)
Linux 4.4.36
scsi: mpt3sas: Unblock device after controller reset
flow_dissect: call init_default_flow_dissectors() earlier
mei: fix return value on disconnection
mei: me: fix place for kaby point device ids.
mei: me: disable driver on SPT SPS firmware
drm/radeon: Ensure vblank interrupt is enabled on DPMS transition to on
mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]
parisc: Also flush data TLB in flush_icache_page_asm
parisc: Fix race in pci-dma.c
parisc: Fix races in parisc_setup_cache_timing()
NFSv4.x: hide array-bounds warning
apparmor: fix change_hat not finding hat after policy replacement
cfg80211: limit scan results cache size
tile: avoid using clocksource_cyc2ns with absolute cycle count
scsi: mpt3sas: Fix secure erase premature termination
Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=y
USB: serial: ftdi_sio: add support for TI CC3200 LaunchPad
USB: serial: cp210x: add ID for the Zone DPMX
usb: chipidea: move the lock initialization to core file
...
If we send SYN_REPORT on every single
multitouch event, it breaks the multitouch.
The multitouch becomes janky and
having to click 2-3 times to
do stuff (plus randomly activating notification
bars when not clicking)
If we suppress these SYN_REPORTS,
multitouch will work fine, plus the events
will have a protocol that looks nice.
In addition, we need to register Goldfish Events
as a multitouch device by issuing
input_mt_init_slots, otherwise
input_handle_abs_event in drivers/input/input.c
will silently drop all ABS_MT_SLOT events,
making it so that touches with more than 1 finger
do not work properly.
Signed-off-by: "Lingfeng Yang" <lfy@google.com>
Change-Id: Ib2350f7d1732449d246f6f0d9b7b08f02cc7c2dd
(cherry picked from commit 6cf40d0a16330e1ef42bdf07d9aba6c16ee11fbc)
fix below warnings:
sensor-dev.c:1016 gyro_dev_ioctl() warn: inconsistent returns 'mutex:&sensor->operation_mutex'.
Locked on: line 973
line 982
Unlocked on: line 919
line 1010
line 1016
sensor-dev.c:1905 sensor_probe() error: potential null dereference 'sensor->input_dev'. (input_allocate_device returns null)
sensor-dev.c:1905 sensor_probe() error: we previously assumed 'sensor->input_dev' could be null (see line 1902)
sensor-dev.c:2051 sensor_probe() error: don't call input_free_device() after input_unregister_device()
sensor-dev.c:2080 sensor_remove() error: don't call input_free_device() after input_unregister_device()
Change-Id: I7da8a337282df7f9b8e6474a68928fc53d4e6890
Signed-off-by: Huang, Tao <huangtao@rock-chips.com>
(cherry picked from commit 08fd14ea02692f43eaa8a166791cdaaa4b6c0738)
commit da25311c7c upstream.
The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop.
Therefore it also needs a keyboard reset to detect the Elantech touchpad.
Otherwise the touchpad appears to be dead.
With this patch the touchpad is detected:
$ dmesg | grep -E "(i8042|Elantech|elantech)"
[ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.680372] i8042: Attempting to reset device connected to KBD port
[ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e)
[ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
[ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74
[ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
Signed-off-by: Patrick Scheuring <patrick.scheuring.dev@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* linux-linaro-lsk-v4.4-android: (1362 commits)
Linux 4.4.30
Revert "fix minor infoleak in get_user_ex()"
Revert "x86/mm: Expand the exception table logic to allow new handling options"
Linux 4.4.29
ARM: pxa: pxa_cplds: fix interrupt handling
powerpc/nvram: Fix an incorrect partition merge
mpt3sas: Don't spam logs if logging level is 0
perf symbols: Fixup symbol sizes before picking best ones
perf symbols: Check symbol_conf.allow_aliases for kallsyms loading too
perf hists browser: Fix event group display
clk: divider: Fix clk_divider_round_rate() to use clk_readl()
clk: qoriq: fix a register offset error
s390/con3270: fix insufficient space padding
s390/con3270: fix use of uninitialised data
s390/cio: fix accidental interrupt enabling during resume
x86/mm: Expand the exception table logic to allow new handling options
dmaengine: ipu: remove bogus NO_IRQ reference
power: bq24257: Fix use of uninitialized pointer bq->charger
staging: r8188eu: Fix scheduling while atomic splat
ASoC: dapm: Fix kcontrol creation for output driver widget
...
commit f9a703a54d upstream.
Just like Fujitsu CELSIUS H730, the H760 also has an Elantech touchpad with
the same quirks. Without this patch, the touchpad is useless out-of-the-box
as the mouse pointer won't move.
This patch makes the driver aware of both the crc_enabled=1 requirement and
the middle button, making the touchpad fully functional out-of-the-box.
Signed-off-by: Matti Kurkela <Matti.Kurkela@iki.fi>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 930e19248e upstream.
On suspend/resume cycle, selftest is executed to reset i8042 controller.
But when this is done in Asus devices, subsequent calls to detect/init
functions to elantech driver fails. Skipping selftest fixes this problem.
An easier step to reproduce this problem is adding i8042.reset=1 as a
kernel parameter. On Asus laptops, it'll make the system to start with the
touchpad already stuck, since psmouse_probe forcibly calls the selftest
function.
This patch was inspired by John Hiesey's change[1], but, since this problem
affects a lot of models of Asus, let's avoid running selftests on them.
All models affected by this problem:
A455LD
K401LB
K501LB
K501LX
R409L
V502LX
X302LA
X450LCP
X450LD
X455LAB
X455LDB
X455LF
Z450LA
[1]: https://marc.info/?l=linux-input&m=144312209020616&w=2
Fixes: "ETPS/2 Elantech Touchpad dies after resume from suspend"
(https://bugzilla.kernel.org/show_bug.cgi?id=107971)
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some sensors are designed to support poweroff when system suspend,
so we need reinit register when system resume.
Change-Id: I4d61dc318562336781aa1010d1fbad447cc76b83
Signed-off-by: Bin Yang <yangbin@rock-chips.com>
Prior restart function would make a call to sys_sync and then
execute a kernel reset. Rather than call the sync directly,
thus necessitating this driver to be builtin, call orderly_reboot,
which will take care of the file system sync.
Note: since CONFIG_INPUT Kconfig is tristate, this driver can be built
as module, despite being marked bool.
Signed-off-by: Eric Ernst <eric.ernst@linux.intel.com>
If the adc drift value is 70, some keys maybe report twice, because
the range of adc_value +/-70 is overlapping other keys' adc range.
So it is better configuring adc drift value from DT, that also can
support more keys at a adc channel. The default adc drift value is
70, if it does not get the drift value from DT.
Change-Id: I46cef235094116d4f03af5e5c0cd3a6dfe7e8b0d
Signed-off-by: David Wu <david.wu@rock-chips.com>
Conflicts:
in fs/proc/task_mmu.c:
looks like vma_get_anon_name() want have a name for anonymous
vma when there is no name used in vma. commit: 586278d78b
The name show is after any other names, so it maybe covered.
but anyway, it just a show here.
[ Upstream commit 7fc595f4c0 ]
Track the status of the irq_out URB to prevent submission iof new requests
while current one is active. Failure to do so results in the "URB submitted
while active" warning/stack trace.
Store pending brightness and FF effect in the driver structure and replace
it with the latest requests until the device is ready to process next
request. Alternate serving LED vs FF requests to make sure one does not
starve another. See [1] for discussion. Inspired by patch of Sarah Bessmer
[2].
[1]: http://www.spinics.net/lists/linux-input/msg40708.html
[2]: http://www.spinics.net/lists/linux-input/msg31450.html
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47af45d684 upstream.
The commit 4097461897 ("Input: i8042 - break load dependency ...")
correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do
the same for AUX port(s), which results in communication on KBD and AUX
ports to clash with each other.
Fixes: 4097461897 ("Input: i8042 - break load dependency ...")
Reported-by: Bruno Wolff III <bruno@wolff.to>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4097461897 upstream.
As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we
have a hard load dependency between i8042 and atkbd which prevents
keyboard from working on Gen2 Hyper-V VMs.
> hyperv_keyboard invokes serio_interrupt(), which needs a valid serio
> driver like atkbd.c. atkbd.c depends on libps2.c because it invokes
> ps2_command(). libps2.c depends on i8042.c because it invokes
> i8042_check_port_owner(). As a result, hyperv_keyboard actually
> depends on i8042.c.
>
> For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a
> Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m
> rather than =y, atkbd.ko can't load because i8042.ko can't load(due to
> no i8042 device emulated) and finally hyperv_keyboard can't work and
> the user can't input: https://bugs.archlinux.org/task/39820
> (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y)
To break the dependency we move away from using i8042_check_port_owner()
and instead allow serio port owner specify a mutex that clients should use
to serialize PS/2 command stream.
Reported-by: Mark Laws <mdl@60hz.org>
Tested-by: Mark Laws <mdl@60hz.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2de4fcc646 upstream.
Some ASUS laptops were shipped with touchpads that require to be woken up
first, before trying to switch them into absolute reporting mode, otherwise
touchpad would fail to work while flooding the logs with:
elan_i2c i2c-ELAN1000:00: invalid report id data (1)
Among affected devices are Asus E202SA, N552VW, X456UF, UX305CA, and
others. We detect such devices by checking the IC type and product ID
numbers and adjusting order of operations accordingly.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Reported-by: Chris Chiu <chiu@endlessm.com>
Reported-by: Vlad Glagolev <stealth@vaygr.net>
Tested-by: Vlad Glagolev <stealth@vaygr.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9003c9cfa upstream.
Passes input_id struct to the common probe function for the tsc200x drivers
instead of just the bustype.
This allows for the use of the product variable to set the input_dev->name
variable according to the type of touchscreen used. Note that when we
introduced support for TSC2004 we started calling everything TSC200X, so
let's keep this quirk.
Signed-off-by: Michael Welling <mwelling@ieee.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7f1429389 upstream.
Xbox One controllers have multiple interfaces which all have the
same class, subclass, and protocol. One of the these interfaces
has only a single endpoint. When Xpad attempts to bind to this
interface, it causes an oops when trying initialize the output URB
by trying to access the second endpoint's descriptor.
This situation was avoided for known Xbox One devices by checking
the XTYPE constant associated with the VID and PID tuple. However,
this breaks when new or previously unknown Xbox One controllers
are attached to the system.
This change addresses the problem by deriving the XTYPE for Xbox
One controllers based on the interface protocol before checking
the interface number.
Fixes: 1a48ff81b3 ("Input: xpad - add support for Xbox One controllers")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60842ef812 upstream.
The VMWare EFI BIOS will expose port 0x5658 as an ACPI resource. This
causes the port to be reserved by the APCI module as the system comes up,
making it unavailable to be reserved again by other drivers, thus
preserving this VMWare port for special use in a VMWare guest.
This port is designed to be shared among multiple VMWare services, such as
the VMMOUSE. Because of this, VMMOUSE should not try to reserve this port
on its own.
The VMWare non-EFI BIOS does not do this to preserve compatibility with
existing/legacy VMs. It is known that there is small chance a VM may be
configured such that these ports get reserved by other non-VMWare devices,
and if this ever happens, the result is undefined.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
