commit 30393181fd upstream.
This patch adds handling to return -EINVAL for an unknown addr type. The
current behaviour is to return 0 as successful but the size of an
unknown addr type is not defined and should return an error like -EINVAL.
Fixes: 94160108a7 ("net/ieee802154: fix uninit value bug in dgram_sendmsg")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ad5dbfc123 ]
This reverts commit 86d92f5465,
which fix the timeout issue for "Samsung Fit Flash".
But the commit affects not only "Samsung Fit Flash" but also other usb
storages that use the same controller and causes severe performance
regression.
# hdparm -t /dev/sda (without the quirk)
Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec
# hdparm -t /dev/sda (with the quirk)
Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/sec
The commit author mentioned that "Issue was reproduced after device has
bad block", so this quirk should be applied when we have the timeout
issue with a device that has bad blocks.
We revert the commit so that we apply this quirk by adding kernel
paramters using a bootloader or other ways when we really need it,
without the performance regression with devices that don't have the
issue.
Signed-off-by: sunghwan jung <onenowy@gmail.com>
Link: https://lore.kernel.org/r/20220913114913.3073-1-onenowy@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eea4c860c3 ]
The usb function device call musb_gadget_queue() adds the passed
request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz)
and (is_buffer_mapped(req) return false),the rxstate() will copy all data
in fifo to request->buf which may cause request->buf out of bounds.
Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);
Signed-off-by: Robin Guo <guoweibin@inspur.com>
Link: https://lore.kernel.org/r/20220906102119.1b071d07a8391ff115e6d1ef@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cacdb14b1c ]
roccat_report_event() is responsible for registering
roccat-related reports in struct roccat_device.
int roccat_report_event(int minor, u8 const *data)
{
struct roccat_device *device;
struct roccat_reader *reader;
struct roccat_report *report;
uint8_t *new_value;
device = devices[minor];
new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
if (!new_value)
return -ENOMEM;
report = &device->cbuf[device->cbuf_end];
/* passing NULL is safe */
kfree(report->value);
...
The registered report is stored in the struct roccat_device member
"struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value,
kfree() the saved report from cbuf[0] and allocates a new reprot.
Since there is no lock when this kfree() is performed,
kfree() can be performed even while reading the saved report.
static ssize_t roccat_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct roccat_reader *reader = file->private_data;
struct roccat_device *device = reader->device;
struct roccat_report *report;
ssize_t retval = 0, len;
DECLARE_WAITQUEUE(wait, current);
mutex_lock(&device->cbuf_lock);
...
report = &device->cbuf[reader->cbuf_start];
/*
* If report is larger than requested amount of data, rest of report
* is lost!
*/
len = device->report_size > count ? count : device->report_size;
if (copy_to_user(buffer, report->value, len)) {
retval = -EFAULT;
goto exit_unlock;
}
...
The roccat_read() function receives the device->cbuf report and
delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of
the Nth report->value is in progress, the pointer that copy_to_user()
is working on is kfree()ed and UAF read may occur. (race condition)
Since the device node of this driver does not set separate permissions,
this is not a security vulnerability, but because it is used for
requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or
There is a possibility to use it by giving.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b064d9144 ]
When the driver calls cx88_risc_buffer() to prepare the buffer, the
function call may fail, resulting in a empty buffer and null-ptr-deref
later in buffer_queue().
The following log can reveal it:
[ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
[ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500
[ 41.836311] Call Trace:
[ 41.836945] __enqueue_in_driver+0x141/0x360
[ 41.837262] vb2_start_streaming+0x62/0x4a0
[ 41.838216] vb2_core_streamon+0x1da/0x2c0
[ 41.838516] __vb2_init_fileio+0x981/0xbc0
[ 41.839141] __vb2_perform_fileio+0xbf9/0x1120
[ 41.840072] vb2_fop_read+0x20e/0x400
[ 41.840346] v4l2_read+0x215/0x290
[ 41.840603] vfs_read+0x162/0x4c0
Fix this by checking the return value of cx88_risc_buffer()
[hverkuil: fix coding style issues]
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60c9213a1d ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 088fe52374 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@940000: '#address-cells' is a required property
sram@940000: '#size-cells' is a required property
sram@940000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5848b9563 ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b11d083c5d ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7c4ebe2f9 ]
Use the general touchscreen method to config the max pressure for
touch tsc2046(data sheet suggest 8 bit pressure), otherwise, for
ABS_PRESSURE, when config the same max and min value, weston will
meet the following issue,
[17:19:39.183] event1 - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[17:19:39.183] event1 - ADS7846 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE
[17:19:39.183] event1 - ADS7846 Touchscreen: was rejected
[17:19:39.183] event1 - not using input device '/dev/input/event1'
This will then cause the APP weston-touch-calibrator can't list touch devices.
root@imx6ul7d:~# weston-touch-calibrator
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
No devices listed.
And accroding to binding Doc, "ti,x-max", "ti,y-max", "ti,pressure-max"
belong to the deprecated properties, so remove them. Also for "ti,x-min",
"ti,y-min", "ti,x-plate-ohms", the value set in dts equal to the default
value in driver, so are redundant, also remove here.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a2565272a ]
On a MSI S270 with Fedora 37 x86_64 / systemd-251.4 the module does not
properly autoload.
This is likely caused by issues with how systemd-udevd handles the single
quote char (') which is part of the sys_vendor / chassis_vendor strings
on this laptop. As a workaround remove the single quote char + everything
behind it from the sys_vendor + chassis_vendor matches. This fixes
the module not autoloading.
Link: https://github.com/systemd/systemd/issues/24715
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220917210407.647432-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94dc3471d1 ]
The strlen() function returns a size_t which is an unsigned int on 32-bit
arches and an unsigned long on 64-bit arches. But in the drm_copy_field()
function, the strlen() return value is assigned to an 'int len' variable.
Later, the len variable is passed as copy_from_user() third argument that
is an unsigned long parameter as well.
In theory, this can lead to an integer overflow via type conversion. Since
the assignment happens to a signed int lvalue instead of a size_t lvalue.
In practice though, that's unlikely since the values copied are set by DRM
drivers and not controlled by userspace. But using a size_t for len is the
correct thing to do anyways.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220705100215.572498-2-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d2cb3066f ]
syzbot is reporting cancel_delayed_work() without INIT_DELAYED_WORK() at
l2cap_chan_del() [1], for CONF_NOT_COMPLETE flag (which meant to prevent
l2cap_chan_del() from calling cancel_delayed_work()) is cleared by timer
which fires before l2cap_chan_del() is called by closing file descriptor
created by socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_L2CAP).
l2cap_bredr_sig_cmd(L2CAP_CONF_REQ) and l2cap_bredr_sig_cmd(L2CAP_CONF_RSP)
are calling l2cap_ertm_init(chan), and they call l2cap_chan_ready() (which
clears CONF_NOT_COMPLETE flag) only when l2cap_ertm_init(chan) succeeded.
l2cap_sock_init() does not call l2cap_ertm_init(chan), and it instead sets
CONF_NOT_COMPLETE flag by calling l2cap_chan_set_defaults(). However, when
connect() is requested, "command 0x0409 tx timeout" happens after 2 seconds
from connect() request, and CONF_NOT_COMPLETE flag is cleared after 4
seconds from connect() request, for l2cap_conn_start() from
l2cap_info_timeout() callback scheduled by
schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT);
in l2cap_connect() is calling l2cap_chan_ready().
Fix this problem by initializing delayed works used by L2CAP_MODE_ERTM
mode as soon as l2cap_chan_create() allocates a channel, like I did in
commit be85972393 ("Bluetooth: initialize skb_queue_head at
l2cap_chan_create()").
Link: https://syzkaller.appspot.com/bug?extid=83672956c7aa6af698b3 [1]
Reported-by: syzbot <syzbot+83672956c7aa6af698b3@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a04d2fc70 ]
Currently if ipcomp_alloc_scratches() fails to allocate memory
ipcomp_scratches holds obsolete address. So when we try to free the
percpu scratches using ipcomp_free_scratches() it tries to vfree non
existent vm area. Described below:
static void * __percpu *ipcomp_alloc_scratches(void)
{
...
scratches = alloc_percpu(void *);
if (!scratches)
return NULL;
ipcomp_scratches does not know about this allocation failure.
Therefore holding the old obsolete address.
...
}
So when we free,
static void ipcomp_free_scratches(void)
{
...
scratches = ipcomp_scratches;
Assigning obsolete address from ipcomp_scratches
if (!scratches)
return;
for_each_possible_cpu(i)
vfree(*per_cpu_ptr(scratches, i));
Trying to free non existent page, causing warning: trying to vfree
existent vm area.
...
}
Fix this breakage by updating ipcomp_scrtches with NULL when scratches
is freed
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: syzbot+5ec9bb042ddfe9644773@syzkaller.appspotmail.com
Tested-by: syzbot+5ec9bb042ddfe9644773@syzkaller.appspotmail.com
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aacd467c0a ]
tcp_md5sig_pool_populated can be read while another thread
changes its value.
The race has no consequence because allocations
are protected with tcp_md5sig_mutex.
This patch adds READ_ONCE() and WRITE_ONCE() to document
the race and silence KCSAN.
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c21ab2afa2 ]
Currently queue_userspace_packet will call kfree_skb for all frames,
whether or not an error occurred. This can result in a single dropped
frame being reported as multiple drops in dropwatch. This functions
caller may also call kfree_skb in case of an error. This patch will
consume the skbs instead and allow caller's to use kfree_skb.
Signed-off-by: Mike Pattrick <mkp@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2109957
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1100248a5c ]
Frames sent to userspace can be reported as dropped in
ovs_dp_process_packet, however, if they are dropped in the netlink code
then netlink_attachskb will report the same frame as dropped.
This patch checks for error codes which indicate that the frame has
already been freed.
Signed-off-by: Mike Pattrick <mkp@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2109946
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68b99e94a4 ]
When CPU 0 is offline and intel_powerclamp is used to inject
idle, it generates kernel BUG:
BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687
caller is debug_smp_processor_id+0x17/0x20
CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
check_preemption_disabled+0xdd/0xe0
debug_smp_processor_id+0x17/0x20
powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp]
...
...
Here CPU 0 is the control CPU by default and changed to the current CPU,
if CPU 0 offlined. This check has to be performed under cpus_read_lock(),
hence the above warning.
Use get_cpu() instead of smp_processor_id() to avoid this BUG.
Suggested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d93540014 ]
When value < time_unit, the parameter of ilog2() will be zero and
the return value is -1. u64(-1) is too large for shift exponent
and then will trigger shift-out-of-bounds:
shift exponent 18446744073709551615 is too large for 32-bit type 'int'
Call Trace:
rapl_compute_time_window_core
rapl_write_data_raw
set_time_window
store_constraint_time_window_us
Signed-off-by: Chao Qin <chao.qin@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 574160b854 ]
Toshiba Satellite Z830 needs the quirk video_disable_backlight_sysfs_if
for proper backlight control after suspend/resume cycles.
Toshiba Portege Z830 is simply the same laptop rebranded for certain
markets (I looked through the manual to other language sections to confirm
this) and thus also needs this quirk.
Thanks to Hans de Goede for suggesting this fix.
Link: https://www.spinics.net/lists/platform-driver-x86/msg34394.html
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Arvid Norlander <lkml@vorpal.se>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Arvid Norlander <lkml@vorpal.se>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07725adc55 ]
The following scenarios exist.
process A: process B:
->f2fs_drop_extent_tree ->f2fs_update_extent_cache_range
->f2fs_update_extent_tree_range
->write_lock
->set_inode_flag
->is_inode_flag_set
->__free_extent_tree // Shouldn't
// have been
// cleaned up
// here
->write_lock
In this case, the "FI_NO_EXTENT" flag is set between
f2fs_update_extent_tree_range and is_inode_flag_set
by other process. it leads to clearing the whole exten
tree which should not have happened. And we fix it by
move the setting it to the range of write_lock.
Fixes:5f281fab9b9a3 ("f2fs: disable extent_cache for fcollapse/finsert inodes")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 184233a520 ]
There are two issues here:
1) The "len" variable needs to be checked before the very first write.
Otherwise if omap2_iommu_dump_ctx() with "bytes" less than 32 it is a
buffer overflow.
2) The snprintf() function returns the number of bytes that *would* have
been copied if there were enough space. But we want to know the
number of bytes which were *actually* copied so use scnprintf()
instead.
Fixes: bd4396f09a ("iommu/omap: Consolidate OMAP IOMMU modules")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/YuvYh1JbE3v+abd5@kili
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37b9345ce7 ]
Commit 2eb2800643 ("powerpc/e500v2: Add Power ISA properties to comply
with ePAPR 1.1") introduced new include file e500v2_power_isa.dtsi and
should have used it for all e500v2 platforms. But apparently it was used
also for e500v1 platforms mpc8540, mpc8541, mpc8555 and mpc8560.
e500v1 cores compared to e500v2 do not support double precision floating
point SPE instructions. Hence power-isa-sp.fd should not be set on e500v1
platforms, which is in e500v2_power_isa.dtsi include file.
Fix this issue by introducing a new e500v1_power_isa.dtsi include file and
use it in all e500v1 device tree files.
Fixes: 2eb2800643 ("powerpc/e500v2: Add Power ISA properties to comply with ePAPR 1.1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220902212103.22534-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfe0d370e0 ]
When building with a recent version of clang, there are a couple of
errors around the call to module_init():
arch/powerpc/math-emu/math_efp.c:927:1: error: type specifier missing, defaults to 'int'; ISO C99 and later do not support implicit int [-Wimplicit-int]
module_init(spe_mathemu_init);
^
int
arch/powerpc/math-emu/math_efp.c:927:13: error: a parameter list without types is only allowed in a function definition
module_init(spe_mathemu_init);
^
2 errors generated.
module_init() is a macro, which is not getting expanded because module.h
is not included in this file. Add the include so that the macro can
expand properly, clearing up the build failure.
Fixes: ac6f120369 ("powerpc/85xx: Workaroudn e500 CPU erratum A005")
[chleroy: added fixes tag]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/8403854a4c187459b2f4da3537f51227b70b9223.1662134272.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 898ec89dbb ]
User reports observing timer event report channel halted but no error
observed in CHANERR register. The driver finished self-test and released
channel resources. Debug shows that __cleanup() can call
mod_timer() after the timer has been deleted and thus resurrect the
timer. While harmless, it causes suprious error message to be emitted.
Use mod_timer_pending() call to prevent deleted timer from being
resurrected.
Fixes: 3372de5813 ("dmaengine: ioatdma: removal of dma_v3.c and relevant ioat3 references")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166360672197.3851724.17040290563764838369.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 379a33786d ]
Since commit edc6afc549 ("tty: switch to ktermios and new framework")
termios speed is no longer stored only in c_cflag member but also in new
additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag
then termios speed is stored only in these new members.
Since commit 027b57170b ("serial: core: Fix initializing and restoring
termios speed") termios speed is available also in struct console.
So properly restore also c_ispeed and c_ospeed members after suspend to fix
restoring termios speed which is not represented by Bnnn constant.
Fixes: 4516d50aab ("serial: 8250: Use canary to restart console after suspend")
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220924104324.4035-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 630624cb1b ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
The problem with ata_id_has_dipm() is that the while it performs a
check against 0 and 0xffff, it performs the check against
ATA_ID_FEATURE_SUPP (word 78), the same word where the feature bit
is stored.
Fix this by performing the check against ATA_ID_SATA_CAPABILITY
(word 76), like required by the spec. The feature bit check itself
is of course still performed against ATA_ID_FEATURE_SUPP (word 78).
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: ca77329fb7 ("[libata] Link power management infrastructure")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5fb6bf853 ]
ACS-5 section
7.13.6.36 Word 78: Serial ATA features supported
states that:
If word 76 is not 0000h or FFFFh, word 78 reports the features supported
by the device. If this word is not supported, the word shall be cleared
to zero.
(This text also exists in really old ACS standards, e.g. ACS-3.)
Additionally, move the macro to the other ATA_ID_FEATURE_SUPP macros
(which already have this check), thus making it more likely that the
next ATA_ID_FEATURE_SUPP macro that is added will include this check.
Fixes: 5b01e4b9ef ("libata: Implement NCQ autosense")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
